Reducing microplastics in tea infusions released from filter bags by pre-washing method: Quantitative evidences based on Raman imaging and Py-GC/MS.

Microplastics released from plastic-based filter bags during tea brewing have attracted widespread attention. Laser confocal micro-Raman and direct classical least squares were used to identify and estimate micron-sized microplastics. Characteristic peaks from pyrolysis-gas chromatography/mass spectrometry of polyethylene terephthalate, polypropylene, and nylon 6 were selected to construct curves for quantification submicron-sized microplastics. The results showed that microplastics released from tea bags in the tea infusions ranged from 80 to 1288 pieces (micron-sized) and 0 to 63.755 µg (submicron-sized) per filter bag. Nylon 6 woven tea bags released far fewer microplastics than nonwoven filter bags. In particular, a simple strategy of three pre-washes with room temperature water significantly reduced microplastic residues with removal rates of 76 %-94 % (micron-sized) and 80 %-87 % (submicron-sized), respectively. The developed assay can be used for the quantitative evaluation of microplastics in tea infusions, and the pre-washing reduced the risk of human exposure to microplastics during tea consumption.

Bioresponsive supramolecular hydrogels for hemostasis, infection control and accelerated dermal wound healing.

Injectable, drug-releasing hydrogel scaffolds with multifunctional properties including hemostasis and anti-bacterial activity are essential for successful wound healing; however, designing ideal materials is still challenging. Herein, we demonstrate the fabrication of a biodegradable, temperature-pH dual responsive supramolecular hydrogel (SHG) scaffold based on sodium alginate/poly(N-vinyl caprolactam) (AG/PVCL) through free radical polymerization and the subsequent chemical and ionic cross-linking. A natural therapeutic molecule, tannic acid (TA)-incorporated SHG (AG/PVCL-TA), was also fabricated and its hemostatic and wound healing efficiency were studied. In the AG/PVCL-TA system, TA acts as a therapeutic molecule and also substitutes as an effective gelation binder. Notably, the polyphenol-arm structure and diverse bonding abilities of TA can hold polymer chains through multiple bonding and co-ordinate cross-linking, which were vital in the formation of the mechanically robust AG/PVCL-TA. The SHG formation was successfully balanced by varying the composition of SA, VCL, TA and cross-linkers. The AG/PVCL-TA scaffold was capable of releasing a therapeutic dose of TA in a sustained manner under physiological temperature-pH conditions. AG/PVCL-TA displayed excellent free radical scavenging, anti-inflammatory, anti-bacterial, and cell proliferation activity towards the 3T3 fibroblast cell line. The wound healing performance of AG/PVCL-TA was further confirmed in skin excision wound models, which demonstrated the potential application of AG/PVCL-TA for skin regeneration and rapid wound healing.

Production of dodecanedioic acid via biotransformation of low cost plant-oil derivatives using Candida tropicalis.

Dodecanedioic acid (DDA) is highly useful to the chemical industry as a versatile precursor for producing the polyamide nylon-6,12, which is used for many technical applications, such as heat and chemical-resistant sheaths. However, DDA synthesis has several drawbacks, such as high energy input and cost-intensive removal of by-products. Therefore, alternative bio-based production routes are required due to increasing industrial demand for green chemicals and renewable products. Candida tropicalis converts petrochemical-based n-dodecanes to the corresponding dicarboxylic acids by targeted functionalization. To increase sustainability of the DDA production process, we tested dodecanoic acid methyl ester, which can be easily obtained from transesterification of coconut oil, in whole-cell biotransformation by C. tropicalis. By modifying selected process parameters, a final DDA concentration of 66 g/L was achieved using a highly reliable, small-scale bioreactor system. Crucial process development included a gradual pH shift, an optimized substrate feeding strategy, and monitoring the transcriptional profile.

Dual responsive magnetic composite nanogels for thermo-chemotherapy.

With the onset of hyperthermia and their advantage in increasing vascular perfusion and permeability in the cancer milieu, thermo-responsive polymers have become an attractive candidate for designing therapeutic nano-vehicles for targeted on-demand delivery of bioactive agents. For this purpose, we developed a dual (thermo- and pH-) responsive nanotherapeutic composite system rendering a combinational therapy of hyperthermia mediated drug delivery. This composite system comprises of magnetic chitosan-g-PNVCL (MCP) polymeric nanogels loaded with anticancer drug, Doxorubicin (DOX). The size distribution and the stability of the MCP nanogels have been characterized using DLS and Zeta-potential studies. XRD and TG-DTA confirms the presence of magnetic nanoparticles loaded onto MCP nanogel. ICP-AES analysis was done to determine the amount of iron content in the MCP nanogels. The magnetic property of the MCP nanogels was estimated to be ∼37 emu/g using Vibrating Sample Magnetometer (VSM). The heating ability of MCP nanogels was calculated to be ∼204W/g for the concentration of 2mg/mL using time-dependent Specific Absorption Rate (SAR) method. Magnetic field induced thermo-responsive and pH responsive drug release studies were carried out and it was found that MCP nanogels have a good on-demand drug release properties. The DOX-MCP nanogels were evaluated for its in vitro killing efficacy of breast cancer cells MCF 7 and MDAMB 231 cells with synergistic effects of both hyperthermia and chemotherapy in presence of magnetic field at the concentration of 2mg/mL. Thus, MCP nanogels can be a potential dual modal on-demand hyperthermia mediated drug delivery platform for the breast cancer treatment.

Nylon 6,6 Nonwoven Fabric Separates Oil Contaminates from Oil-in-Water Emulsions.

Industrial oil spills into aquatic environments can have catastrophic environmental effects. First responders to oil spills along the coast of the Gulf of Mexico in the southern United States have used spunbond nylon fabric bags and fences to separate spilled oil and oil waste from contaminated water. Low area mass density spunbond nylon is capable of sorbing more than 16 times its mass in low viscosity crude oil and more than 26 times its mass in higher viscosity gear lube oil. Nylon bags separated more than 95% of gear lube oil contaminate from a 4.5% oil-in-water emulsion. Field testing of spunbond nylon fences by oil spill first responders has demonstrated the ability of this material to contain the oily contaminate while allowing water to flow through. We hypothesize that the effectiveness of nylon as an oil filter is due to the fact that it is both more oleophilic and more hydrophilic than other commonly used oil separation materials. The nylon traps oil droplets within the fabric or on the surface, while water droplets are free to flow through the fabric to the water on the opposite side of the fabric.

Antibacterial activity of combination of synthetic and biopolymer non-woven structures.

BACKGROUND: Fibrous structures and synthetic polymer blends offer potential usages in making biomedical devices, textiles used in medical practices, food packaging, tissue engineering, environmental applications and biomedical arena. These products are also excellent candidates for building scaffolds to grow stem cells for implantation, to make tissue engineering grafts, to make stents to open up blood vessels caused by atherosclerosis or narrowed by blood clots, for drug delivery systems for micro- to nano-medicines, for transdermal patches, and for healing of wounds and burn care. The current study was designed to evaluate the antimicrobial activity of woven and non-woven forms of nano- and macro-scale blended polymers having biocompatible and biodegradable characteristics. METHODS: The antimicrobial activity of non-woven fibrous structures created with the combination of synthetic and biopolymer was assessed using Gram-negative, Gram-positive bacteria, such as Staphylococcus aureus, Proteus vulgaris, Escherichia coli and Enterobacter aerogenes using pour plate method. Structural evaluation of the fabricated samples was performed by Fourier transform infrared spectroscopy. RESULTS: Broad spectrum antibacterial activities were found from the tested materials consisting of polyvinyl alcohol (PVA) with chitosan and nylon-6 combined with chitosan and formic acid. CONCLUSIONS: The combination of PVA with chitosan was more bactericidal or bacteriostatic than that of nylon-6 combined with chitosan and formic acid. PVA combination with chitosan appears to be a broad-spectrum antimicrobial agent.

Highly conductive and flexible nylon-6 nonwoven fiber mats formed using tungsten atomic layer deposition.

Low-temperature vapor-phase tungsten atomic layer deposition (ALD) using WF6 and dilute silane (SiH4, 2% in Ar) can yield highly conductive coatings on nylon-6 microfiber mats, producing flexible and supple nonwovens with conductivity of ∼1000 S/cm. We find that an alumina nucleation layer, reactant exposure, and deposition temperature all influence the rate of W mass uptake on 3D fibers, and film growth rate is calibrated using high surface area anodic aluminum oxide. Transmission electron microscopy (TEM) reveals highly conformal tungsten coatings on nylon fibers with complex "winged" cross-section. Using reactant gas "hold" sequences during the ALD process, we conclude that reactant species can transport readily to reactive sites throughout the fiber mat, consistent with conformal uniform coverage observed by TEM. The conductivity of 1000 S/cm for the W-coated nylon is much larger than found in other conductive nonwovens. We also find that the nylon mats maintain 90% of their conductivity after being flexed around cylinders with radii as small as 0.3 cm. Metal ALD coatings on nonwovens make possible the solvent-free functionalization of textiles for electronic applications.

Oxidation of primary amines to oximes with molecular oxygen using 1,1-diphenyl-2-picrylhydrazyl and WO3/Al2O3 as catalysts.

The oxidative transformation of primary amines to their corresponding oximes proceeds with high efficiency under molecular oxygen diluted with molecular nitrogen (O2/N2 = 7/93 v/v, 5 MPa) in the presence of the catalysts 1,1-diphenyl-2-picrylhydrazyl (DPPH) and tungusten oxide/alumina (WO3/Al2O3). The method is environmentally benign, because the reaction requires only molecular oxygen as the terminal oxidant and gives water as a side product. Various alicyclic amines and aliphatic amines can be converted to their corresponding oximes in excellent yields. It is noteworthy that the oxidative transformation of primary amines proceeds chemoselectively in the presence of other functional groups. The key step of the present oxidation is a fast electron transfer from the primary amine to DPPH followed by proton transfer to give the α-aminoalkyl radical intermediate, which undergoes reaction with molecular oxygen and hydrogen abstraction to give α-aminoalkyl hydroperoxide. Subsequent reaction of the peroxide with WO3/Al2O3 gives oximes. The aerobic oxidation of secondary amines gives the corresponding nitrones. Aerobic oxidative transformation of cyclohexylamines to cyclohexanone oximes is important as a method for industrial production of ε-caprolactam, a raw material for Nylon 6.

Preparation of tea catechins using polyamide.

An adsorption separation method using Polyamide-6 (PA) as an adsorbent was developed to separate catechins from green tea extract. The adsorption capacity of total catechins for PA was 193.128 mg g⁻¹ with an adsorption selectivity coefficient K(A)(B) of total catechins over caffeine 21.717, which was better than macroporous resin model HPD 600. The Langmuir model and the pseudo-second order mode were primely fitted to describe its equilibrium data and adsorption kinetics, respectively. PA column separation by two-step elution using water and 80% (v/v) aqueous ethanol was established to prepare catechins complex which contained 670.808 mg g⁻¹ total catechins and 1.828 mg g⁻¹ caffeine. It is considered that PA was a promising adsorbent for selective isolation of catechins.

Effect of gamma irradiation on caprolactam migration from multilayer polyamide 6 films into food simulants: development and validation of a gas chromatographic method.

A GC method to determine caprolactam in water, 15% ethanol, and olive oil food simulants was developed and validated. Linear ranges varied from 0.96 to 642.82 microg/mL for water, 0.64 to 800.32 microg/mL for 15% ethanol, and 1.06 to 1062.34 microg/g for olive oil, with correlation coefficients higher than 0.999. Method precision studies showed RSD values lower than 5.45%, while method accuracy studies showed recovery from 72 to 111% for all simulants. The effect of gamma irradiation on caprolactam migration from multilayer polyamide 6 (PA-6) films intended for cheese into water, 15% ethanol, olive oil, and 3% acetic acid simulants was also studied. For migration assay, non-irradiated and irradiated (12 kGy) films were placed in contact with the simulant and exposed at 40 degrees C for 10 days. The validated method was used to quantify caprolactam migration from multilayer PA-6 films into the simulants, which ranged from 1.03 to 7.59 mg/kg for non-irradiated films, and from 4.82 to 11.32 mg/kg for irradiated films. Irradiation caused almost no changes in caprolactam levels, with the exception of olive oil, which showed an increase in the caprolactam level. All multilayer PA-6 films were in accordance with the requirements of the legislation for caprolactam migration.

Synthesis and evaluation of succinoyl-caprolactam gamma-secretase inhibitors.

The synthesis, evaluation, and structure-activity relationships of a series of succinoyl lactam inhibitors of the Alzheimer's disease gamma-secretase are described. Beginning with a screening hit with broad proteinase activity, optimization provided compounds with both high selectivity for inhibition of gamma-secretase and high potency in cellular assays of A beta reduction. The SAR and early in vivo properties of this series of inhibitors will be presented.

Apatite coated on organic polymers by biomimetic process: improvement in its adhesion to substrate by NaOH treatment.

A dense, uniform and highly biologically active bone-like apatite layer can be formed in arbitrary thickness on any kind and shape of solid substrate surface by the following biomimetic method at ordinary temperature and pressure. First, a substrate is set in contact with particles of bioactive CaO SiO2 based glass soaked in a simulated body fluid (SBF) with inorganic ion concentrations nearly equal to those of human blood plasma. Second, the substrate is soaked in another solution with ion concentrations 1.5 times those of SBF (1.5 SBF). In the present study, organic polymer substrates treated with 5 M NaOH solution were subjected to the above mentioned biomimetic process. The induction periods for the apatite nucleation on polyethyleneterephthalate (PET), polymethylmethacrylate (PMMA), polyamide 6 (PA6), and polyethersulfone (PESF) substrates were reduced from 24 to 12 h with the NaOH treatment. The adhesive strength of the formed apatite layer were increased from 3.5 to 8.6 MPa, from 1.1 to 3.4 MPa, and from 0.6 to 5.3 MPa with the NaOH treatment, for PET, PMMA, and PA 6, respectively. It was assumed that highly polar groups, such as carboxyl and sulfinyl ones formed by the hydrolysis of an ester group on PET and PMMA and of an amide group on PA 6, or of a sulfonyl group on PESF with the NaOH treatment, attached a large number of hydrated silica dissolved from the glass particles, to accelerate the apatite nucleation, and also to form a strong bond with the apatite. The apatite-organic polymer composites thus obtained are expected to be useful as bone-repairing as well as soft tissue-repairing materials.

[Preparation of lysozyme immobilized on textile carriers and its use in treating suppurative wounds]. / Poluchenie immobilizovannoogo na tekstil'nykh nositeliakh lizotsima i ego primenenie dlia lecheniia gnoinykh ran.

Immobilized forms of lysozyme were prepared by its covalent binding on dialdehyde cellulose and polycaproamide fibres as woven and knitted fabrics respectively. The preparations were estimated by the content of protein and bacteriolytic activity. The lysozyme activity per 1 g of the carrier and the protein content on dialdehyde cellulose were several times higher than those on polycaproamide while the specific activity of lysozyme on the polycaproamide carrier was somewhat higher than that on dialdehyde cellulose. The effect of the immobilized lysozyme in treatment of purulent wounds was studied on albino rats. It was shown that the periods of the wound healing with the use of the immobilized lysozyme were shorter than those with the use of native lysozyme. Cytological and morphological investigation of the wound wall confirmed the higher efficacy of the lysozyme immobilized forms in treatment of purulent wounds as compared to the use of the native enzyme.

New matrices for the purification of pectinases by affinity chromatography.

Polygalacturonic acid was used as a ligand in the affinity technique for pectinases purification from the filtrate of Aspergillus niger 71 culture. For this purpose four matrices were examined, namely, alkylamine controlled porous glass (CPG), alkylamine silica gel as well as keratin or polyamide coated silica gel. Good results of pectinase purification was obtained on silanized CPG or keratin coated silica gel supports.