Antibacterial Properties Associated with Chitosan Nanoparticle Treatment on Root Dentin and 2 Types of Endodontic Sealers.

INTRODUCTION: The aim of this study was to evaluate the efficacy of carboxymethyl chitosan (CMCS) and chitosan nanoparticles (CNps) to inactivate bacteria and prevent biofilm formation at sealer-dentin interfaces. METHODS: The study was divided into 3 stages: first stage, the experiment was conducted to analyze the antibacterial properties of CMCS in different formulations against biofilms; second stage, direct-contact and membrane-restricted methods were used to evaluate the antibacterial properties of an epoxy resin (ThermaSeal Plus; Dentsply Tulsa Dental, Tulsa, OK) and calcium silicate (MTA Fillapex; Angelus SA, Londrina, PR, Brazil) based-sealers with or without CNps; and third stage, biofilm formation at the sealer dentin interfaces of root dentin treated with CMCS and filled with gutta-percha and CNp incorporated sealer were analyzed after 1- and 4-week aging periods. The samples were treated and filled as follows: (1) distilled water: unaltered sealer (control group), (2) CMCS: sealer+CNps (CMCS group), and (3) CMCS/rose bengal: sealer+CNps (CMCS/RB group). Enterococcus faecalis was used to infect all the samples. Microbiological and microscopic analyses were used to assess the antibacterial characteristics. RESULTS: CMCS-based treatments effectively killed bacteria adherent on root dentin (P < .05). The addition of CNps to ThermaSeal enhanced its antibacterial ability by direct-contact and membrane-restricted tests (P < .05). The CNp incorporation significantly increased the antibacterial efficacy of root canal sealers even after a 4-week aging time (P < .05). CONCLUSIONS: This study highlighted the ability of CMCS to disinfect root canal dentin and inhibit bacterial adhesion. CNps in root canal sealers are capable of maintaining their antibacterial activity even after prolonged aging.

Effect of the crown, post, and remaining coronal dentin on the biomechanical behavior of endodontically treated maxillary central incisors.

STATEMENT OF PROBLEM: It is unclear how the amount of remaining coronal dentin and the type of post and core rehabilitation affect the strain, stress distribution, and fracture resistance of endodontically treated teeth. PURPOSE: The purpose of this study was to evaluate the effects of the type of post, type of crown, and the amount of remaining coronal dentin on the biomechanical behavior of endodontically treated teeth. MATERIAL AND METHODS: The investigation was conducted by using 3-dimensional finite element analysis and laboratory tests. Three-dimensional models of a maxillary central incisor were generated: without remaining coronal dentin, with 1.0 mm of remaining coronal dentin, with 2.0 mm of remaining coronal dentin, and restored with a glass-fiber post or a cast post and core in combination with a metal crown or an alumina-reinforced ceramic crown. The results were evaluated by using the von Mises criterion and Maximum Principal Stress. One hundred twenty bovine incisors were selected and divided into 12 treatment groups (n=10). Specimens were loaded at a 135-degree angle to perform strain measurements and were then loaded until fracture. The strain and fracture resistance results were analyzed with 3-way analysis of variance and the Tukey honestly significant difference test (α=.05). RESULTS: The alumina-reinforced ceramic crowns and metal crowns associated with a glass-fiber post showed a homogeneous stress distribution within the root. The cast post and core concentrated higher stresses at the post-dentin interface. Significant differences were found among the mean fracture resistance values for all groups (P<.05). The presence of 2.0 mm of coronal remnants resulted in lower strains and higher fracture resistance for both the metal and ceramic crowns. Roots restored with glass-fiber posts exhibited more favorable fractures. CONCLUSIONS: The presence of 2 mm of remaining coronal dentin improved the mechanical behavior of the endodontically treated maxillary incisors. Teeth restored with glass-fiber posts and composite resin cores showed a homogeneous stress distribution within the root dentin.

Regenerative endodontic treatment of permanent teeth after completion of root development: a report of 2 cases.

INTRODUCTION: Clinical regenerative endodontic treatment has been focused on immature necrotic teeth, but it should be extended to mature teeth as an alternative to conventional endodontic treatment. There have been no clinical reports to attempt to revascularize pulp in the entire root canals of mature necrotic teeth. The present report describes the treatment of mature, necrotic, permanent incisors with apical periodontitis by using regenerative endodontic therapy. METHODS: In this case report, modified regenerative endodontic procedures were used to enhance the probability of pulp revasuclarization in mature necrotic teeth. At the first appointment, the root canals were mechanically instrumented to the apices with a large apical size by using the step-back technique and irrigated copiously with antimicrobial solution. Intracanal medicaments (calcium hydroxide or ciprofloxacin) were placed in the root canals. At the following appointment, the root canals were irrigated with antimicrobial solution, and bleeding was induced into the root canals by passing hand files beyond apices. Collagen membranes were placed in the canals as a matrix against which mineral trioxide aggregate was placed. Glass ionomer was used to restore the teeth. The resolution of apical radiolucency and regression of clinical signs and symptoms were observed at recall appointments. CONCLUSIONS: The present report presents modified regenerative endodontic procedures for mature necrotic permanent teeth. Further clinical studies with a large number of cases are needed to investigate the outcome of regenerative endodontic therapy for mature necrotic teeth.

Influence of irrigant, dowel type, and root-reinforcing material on fracture resistance of thin-walled endodontically treated teeth.

PURPOSE: Unresolved controversy exists concerning the optimum restorative material to reinforce the thin-walled roots of endodontically treated teeth to improve their fracture resistance under occlusal load. This study evaluated the effectiveness of irrigant, dowel type, and root-reinforcing material on the fracture resistance of thin-walled endodontically treated teeth. MATERIALS AND METHODS: The root canals of 140 maxillary central incisors were enlarged and equally divided into seven groups according to the canal irrigant: no irrigant (control), 5% hydrogen peroxide, 5% sodium hypochlorite, a combination of 5% hydrogen peroxide and sodium hypochlorite, 15% ethylenediaminotetraacetic acid (EDTA), 10% lactic acid, or 20% lactic acid. Within each group, root canals were lined with composite resin (PermaFlo) or glass ionomer cement (Fuji II LC). A light-transmitting plastic dowel (Luminex) was used to create space for a quartz fiber-reinforced dowel (Aestheti Post) or a titanium alloy dowel (ParaPost XH) and to cure the restorative materials. Following dowel cementation and restoration of the roots with composite core, the teeth were submitted to fracture resistance testing, and data were analyzed with 3-way ANOVA followed by Ryan-Einot-Gabriel-Welsch Multiple Range Test (α= 0.05). RESULTS: Fracture resistance values were significantly different among irrigants, restorative materials, and their interaction (p < 0.001); however, the dowel type was not significantly different (p= 0.51). CONCLUSIONS: Thin-walled roots that had the smear layer removed with lactic acid and that were then lined with composite resin had a higher fracture resistance.

VDR deficiency affects alveolar bone and cementum apposition in mice.

OBJECTIVE: To compare the mineralisation density (MD), morphology and histology of alveolar bone and cementum amongst VDR +/+, VDR -/-, and VDR -/- groups supplemented with a diet TD 96348, containing 20% lactose, 2.0% calcium and 1.25% phosphorous. METHODS: Four groups of mice (6 mice/group) were identified by genotyping: VDR +/+ mice (VDR wild type), VDR -/- mice (VDR deficient), VDR -/- offsprings derived from VDR -/- parents receiving a supplemental diet (early rescued), and VDR -/- mice fed with a supplemental diet beginning at age one month (late rescued). All mice were sacrificed at age 70.5 days. Micro-CT was used to compare MD and morphology of alveolar bone and cementum. H-E and Toluidine blue staining was used to examine the ultrastructure of the alveolar bone and cementum at matched locations. RESULTS: In VDR -/- group, alveolar bone and cementum failed to mineralise normally. Early rescue increased MD of alveolar bone in VDR -/- mice with excessive alveolar bone formation, but which not observed in late rescue group. MD and morphology of cementum-dentine complex in both early and late rescue groups were comparable with VDR +/+ group when feeding with high-calcium rescue diet. CONCLUSIONS: VDR affects alveolar bone mineralisation and formation systemically and locally. However, cementum apposition and mineralisation is mainly regulated by calcium concentrations in serum.

Dentin strain induced by laser irradiation.

The purpose of this study was to investigate the strain and temperature change in dentin induced by laser irradiation of human root canals with or without water cooling. Twenty-eight palatal roots of extracted human maxillary first molars were used. The strain in dentin was measured using strain gauges fixed on the apical third of the buccal root surface. The temperature change of the root dentin was monitored using thermocouples embedded into dentin near the apex. The root canal was irradiated with Er:YAG or Nd:YAG laser at an output of 1 W (100 mJ, 10 pps) for 5 s. The tip of the irradiation fibre was located 2.0 mm from the root apex. With water cooling, the mean maximum strain induced by Er:YAG laser was significantly lower than that by Nd:YAG laser (P < 0.05). However, without water cooling, no significant difference between the two lasers (P > 0.05) was found. The results suggest that the strain induced by Er:YAG laser irradiation in dentin with water cooling may be minimal, but there still might be a risk of root micro-fracture if cooling is not sufficient.

Avaliação da temperatura na câmara pulpar durante clareamento dental externo com diferentes fontes deluz e materiais clareadores / Evaluation of the pulp chamber temperature during external dental bleaching with different light activation sources and bleaching materials

O objetivo deste estudo foi avaliar a variação de temperatura da câmara pulpar durante o clareamento dental externo sob diferentes fontes de luz e diferentes géis clareadores. Foram utilizados 20 incisivos centrais superiores, os quais foram divididos em quatro grupos: G1 - luz halógena e gel Whitness HP, G2 - luz halógenae gel Whitness HP MAXX, G3 - luz LED e gel Whitness HP, G4 - luz LED e gel Whitness HP MAXX. Todos os dentes tiveram sua temperatura medida antes e durante a aplicação de luz, com e sem o gel clareador, sendo anotados os valores iniciais, finais e de temperatura máxima atingida. Os dados foram submetidos ao teste de Kruskal-Wallis (p<0,05). A temperatura média obtida pela luz halógena quando utilizado Whiteness HP e Whiteness HP MAXX foi de 3,1°C e 3,7°C, e pela luz LED foi de -0,6°C e -0,2°C, respectivamente. Houve diferença significante entre G1xG3, G2xG3, G1xG4. A luz halógena aumentou a temperatura da câmara pulpar, enquanto a luz LED não promoveu aquecimento.

Evaluation of effectiveness of Er,Cr:YSGG laser for root canal disinfection: theoretical simulation of temperature elevations in root dentin.

Erbium, chromium: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) lasers are currently being investigated for disinfecting the root canal system. Prior to using laser therapy, it is important to understand the temperature distribution and to assess thermal damage to the surrounding tissue. In this study, a theoretical simulation using the Pennes bioheat equation is conducted to evaluate how heat spreads from the canal surface using an Er,Cr:YSGG laser. Results of the investigation show that some of the proposed treatment protocols for killing bacteria in the deep dentin are ineffective, even for long heating durations. Based on the simulation, an alternative treatment protocol is identified that has improved effectiveness and is less likely to introduce collateral damage to the surrounding tissue. The alternative protocol uses 350 mW laser power with repeating laser tip movement to achieve bacterial disinfection in the deep dentin (800 microm lateral from the canal surface), while avoiding thermal damage to the surrounding tissue (T<47 degrees C). The alternative treatment protocol has the potential to not only achieve bacterial disinfection of deep dentin but also shorten the treatment time, thereby minimizing potential patient discomfort during laser procedures.

Pulp ablation therapy by inductive heating: heat generation characteristics in the pulp cavity.

OBJECTIVE AND METHODS: This study was performed to clarify the usefulness of inductive heating system for the new endodontic therapy. Dextran magnetite complex (DM) suspensions were injected into the root canal of a permanent tooth, and the tooth was heated up to about 55.0 degrees C by alternating-current magnetic field. RESULTS AND CONCLUSION: The time until the temperature in the pulp cavity reached 55.0 degrees C was 328 +/- 26 s (mean +/- s.d., n = 8) in the 56 mg as Fe ml(-1) of DM concentration. The temperature in the pulp cavity could be maintained at 53.5-59.0 degrees C for 1200 s by changing the magnetic field intensity safely, while temperature elevations of the dental surface on the coronal and apical sides were 4.9 degrees and 3.7 degrees C, respectively. Thus, this inductive heating system, which has the possibility of selective heating, might be useful for eliminating residues of pulp as a new ablation therapy.

The effect of two different root canal sealers and smear layer on resistance to root fracture.

The purpose of this in vitro study was to test the effect of Ketac-Endo (KE) and AH 26 on resistance to root fracture and also to evaluate the effect of smear layer. Seventy-two human maxillary canine teeth were randomly divided into six groups (n = 12) and were prepared using six different methods: group 1: KE, without smear layer (smear -); group 2: KE, with smear layer (smear +); group 3: AH 26, smear (-); group 4: AH 26, smear (+); group 5 (negative control): nonprepared; group 6 (positive control): prepared but unfilled. After storing 1 week in 100% humidity at 37 degrees C, the coronal lingual walls and root canal spaces were lowered 2 mm below the buccal walls of the roots. The samples were placed into acrylic resin blocks so that 10 mm of buccal roots were exposed and were placed in a specially designed steel pad at an angle of 15 degrees to the long axis of the root. A slowly increasing force was applied at the junction of the buccal wall and root canal space until fracture occurred. The force required to fracture each tooth was recorded as kg and statistically analyzed using one-way analysis of variance and Duncan tests. The results indicated that instrumentation of the root canals significantly weakened the tooth structure to fracture (p < 0.05). The canals obturated with either sealer were significantly stronger than roots whose canals were instrumented but not obturated (p < 0.05), and there was no difference between the sealers. The presence or absence of the smear layer did not cause any significant effect on the root fracture resistance of the teeth (p > 0.05).