Gel electromembrane microextraction followed by ion chromatography for direct determination of iodine in supplements and fortified food samples: Green chemistry for food analysis.

In this study, a sensitive, selective, and environmentally friendly analytical method for direct extraction and preconcentration of iodine was developed. Iodine, as an iodate ion or iodide ion, was simultaneously extracted and preconcentrated by gel electromembrane microextraction (G-EME) and analyzed for total iodine by ion chromatography. The total iodine was determined by combining the peak areas of both iodate and iodide ions. Under the optimized conditions, linear calibration for iodine using a mixture of iodate and iodide ions was obtained from 10 to 100 µg L-1 (r2 > 0.996). The detection limit was 7.0 µg L-1. Recoveries of spiked iodine (as iodate) in the samples were greater than 90%. The method was applied for the determination of iodine in dietary supplements and fortified food samples, i.e., iodine-enriched eggs. Our developed method could be directly applied for the determination of iodine in different matrix samples including eggs without a pretreatment step.

Innovative Approaches for Recovery of Phytoconstituents from Medicinal/Aromatic Plants and Biotechnological Production.

Continuously growing demand for plant derived therapeutic molecules obtained in a sustainable and eco-friendly manner favors biotechnological production and development of innovative extraction techniques to obtain phytoconstituents. What is more, improving and optimization of alternative techniques for the isolation of high value natural compounds are issues having both social and economic importance. In this critical review, the aspects regarding plant biotechnology and green downstream processing, leading to the production and extraction of increased levels of fine chemicals from both plant cell, tissue, and organ culture or fresh plant materials and the remaining by-products, are discussed.

Multi-angle light scattering as a process analytical technology measuring real-time molecular weight for downstream process control.

For many protein therapeutics including monoclonal antibodies, aggregate removal process can be complex and challenging. We evaluated two different process analytical technology (PAT) applications that couple a purification unit performing preparative hydrophobic interaction chromatography (HIC) to a multi-angle light scattering (MALS) system. Using first principle measurements, the MALS detector calculates weight-average molar mass, Mw and can control aggregate levels in purification. The first application uses an in-line MALS to send start/stop fractionation trigger signals directly to the purification unit when preset Mw criteria are met or unmet. This occurs in real-time and eliminates the need for analysis after purification. The second application uses on-line ultra-high performance size-exclusion liquid chromatography to sample from the purification stream, separating the mAb species and confirming their Mw using a µMALS detector. The percent dimer (1.5%) determined by the on-line method is in agreement with the data from the in-line application (Mw increase of approximately 2750 Da). The novel HIC-MALS systems demonstrated here can be used as a powerful tool for real-time aggregate monitoring and control during biologics purification enabling future real time release of biotherapeutics.

Mathematical modeling of the adsorption/desorption characteristics of anthocyanins from muscadine (Vitis rotundifolia cv. Noble) juice pomace on Amberlite FPX66 resin in a fixed bed column.

BACKGROUND: Muscadine grape pomace, a by-product of juicing and wine-making, contains significant amounts of anthocyanin 3,5-diglucosides, known to be beneficial to human health. RESULTS: The objective of this research was to use mathematical modeling to investigate the adsorption/desorption characteristics of these anthocyanins from muscadine grape pomace on Amberlite FPX66 resin in a fixed bed column. Anthocyanins were extracted using hot water and ultrasound, and the extracts were loaded onto a resin column at five bed depths (5, 6, 8, 10 and 12 cm) using three flow rates (4, 6 and 8 mL min-1 ). It was found that adsorption on the column fitted the bed depth service time (BDST) model and the empty bed residence time (EBRT) model. Desorption was achieved by eluting the column using ethanol at four concentrations (25, 40, 55 and 70% v/v) and could be described with an empirical sigmoid model. The breakthrough curves of anthocyanins fitted the BDST model for all three flow rates with R2 values of 0.983, 0.992 and 0.984 respectively. The EBRT model was successfully employed to find the operating lines, which allow for column scale-up while still achieving similar results to those found in a laboratory operation. Desorption with 40% (v/v) ethanol achieved the highest recovery rate of anthocyanins at 79.6%. CONCLUSION: The mathematical models established in this study can be used in designing a pilot/industrial- scale column for the separation and concentration of anthocyanins from muscadine juice pomace. © 2018 Society of Chemical Industry.

Preliminary enrichment and separation of chlorogenic acid from Helianthus tuberosus L. leaves extract by macroporous resins.

In the present study, a simple and efficient method for the preparative separation of 3-CQA from the extract of Helianthus tuberosus leaves with macroporous resins was studied. ADS-21 showed much higher adsorption capacity and better adsorption/desorption properties for 3-CQA among the tested resins. The adsorption of 3-CQA on ADS-21 resin at 25°C was fitted best to the Langmuir isotherm model and pseudo-second-order kinetic model. Dynamic adsorption/desorption experiments were carried out in a glass column packed with ADS-21 to optimise the separation process of 3-CQA from H. tuberosus leaves extract. After one treatment with ADS-21, the content of 3-CQA in the product was increased 5.42-fold, from 12.0% to 65.2%, with a recovery yield of 89.4%. The results demonstrated that the method was suitable for large-scale separation and manufacture of 3-CQA from H. tuberosus leaves.

[Purification technology of procymidone residues in ginseng extracts by macroporous resins].

The macroporous resin separation technology has been mainly applied in the enrichment of saponins, flavonoids, alkaloids and other ingredients, and used in the removal of heavy metal impurities and pesticide residues in recent years. This paper focuses on the synthesis of the new-type macroporous adsorption resin LKS-11 according to the molecular structure characteristics of procymidone. Specifically, the selective absorptive property and other advantages of macroporous resin were utilized to analyze the procymidone removal efficiency in ginseng extracts from different sources. The type of macroporous resins, absorptive property and desorption conditions were observed respectively by static and dynamic adsorption methods to determined the optimum process conditions. According to the results, LKS-11 showed a good absorptive property to procymidone in ginseng extracts and provided a theoretical basis for studies on the removal of procymidone residues from ginseng extracts by using macroporous adsorption resin. Because of no secondary pollution on samples, low production and operation costs, high procymidone removal efficiency and high product recovery rate, this method is suitable to be applied in production.

5-O-caffeoylshikimic acid from Solanum somalense leaves: advantage of centrifugal partition chromatography over conventional column chromatography.

Solanum somalense leaves, used in Djibouti for their medicinal properties, were extracted by MeOH. Because of the high polyphenol and flavonoid contents of the extract, respectively, determined at 80.80 ± 2.13 mg gallic acid equivalent/g dry weight and 24.4 ± 1.01 mg quercetin equivalent/g dry weight, the isolation and purification of the main polyphenols were carried out by silica gel column chromatography and centrifugal partition chromatography. Column chromatography led to 11 enriched fractions requiring further purification, while centrifugal partition chromatography allowed the easy recovery of the main compound of the extract. In a solvent system composed of CHCl3/MeOH/H2O (9.5:10:5), 21.8 mg of this compound at 97% purity was obtained leading to a yield of 2.63%. Its structure was established as 5-O-caffeoylshikimic acid by mass spectrometry and NMR spectroscopy. This work shows that S. somalense leaves contain very high level of 5-O-caffeoylshikimic acid (0.74% dry weight), making it a potential source of production of this secondary metabolite that is not commonly found in nature but could be partly responsible of the medicinal properties of S. somalense leaves.

Preparative isolation and purification of phlorotannins from Ecklonia cava using centrifugal partition chromatography by one-step.

Various bioactive phlorotannins of Ecklonia cava (e.g., dieckol, eckol, 6,6-bieckol, phloroglucinol, phloroeckol, and phlorofucofuroeckol-A) are reported. However, their isolation and purification are not easy. Centrifugal partition chromatography (CPC) can be used to efficiently purify the various bioactive-compounds efficiently from E. cava. Phlorotannins are successfully isolated from the ethyl acetate (EtOAc) fraction of E. cava by CPC with a two-phase solvent system comprising n-hexane:EtOAc:methanol:water (2:7:3:7, v/v) solution. The dieckol (fraction I, 40.2mg), phlorofucofuroeckol-A (fraction III, 31.1mg), and fraction II (34.1mg) with 2,7-phloroglucinol-6,6-bieckol and pyrogallol-phloroglucinol-6,6-bieckol are isolated from the crude extract (500 mg) by a one-step CPC system. The purities of the isolated dieckol and phlorofucofuroeckol-A are ⩾90% according to high performance liquid chromatography (HPLC) and electrospray ionization multi stage tandem mass spectrometry analyses. The purified 2,7-phloroglucinol-6,6-bieckol and pyrogallol-phloroglucinol-6,6-bieckol are collected from fraction II by recycle-HPLC. Thus, the CPC system is useful for easy and simple isolation of phlorotannins from E. cava.

New cationic antimicrobial peptide screened from boiled-dried anchovies by immobilized bacterial membrane liposome chromatography.

An efficient immobilized bacterial membrane liposome chromatography method was used to screen potential antimicrobial peptides from boiled-dried anchovies. A novel cationic antimicrobial peptide (Apep10) was successfully isolated by one-step chromatography. The sequence of Apep10 was identified as GLARCLAGTL by matrix-assisted laser desorption/ionization quadrupole time-of-flight tandem mass spectrometry (MALDI-Q-TOF MS). The antimicrobial activity assessment indicated that Apep10 inhibited the growth of the reference bacteria (Escherichia coli, Shigella dysenteriae, Pseudomonas aeruginosa, Salmonella typhimurium, Staphylococcus aureus, Bacillus subtilis, and Streptococcus pneumoniae), with minimal inhibitory concentration (MIC) values ranging from 8 to 64 µg/mL. Almost no cytotoxicity against mouse erythrocytes was observed at concentrations below 20 µg/mL. Nucleotide leakage induced by Apep10 showed that the peptide exhibited permeable activity on the cytoplasmic membrane. Alterations in morphology were observed by scanning electronic microscopy (SEM). Membrane disruption was confirmed by confocal laser scanning microscopy (CLSM) with propidium iodide (PI). The results demonstrate that immobilized bacterial membrane liposome chromatography is a straightforward technique for screening unknown antimicrobial peptides with cell-membrane-interacting activities from boiled-dried anchovies.

Preparative separation and purification of rosmarinic acid from perilla seed meal via combined column chromatography.

In this study, the preparative separation and purification of rosmarinic acid (RA) from perilla seed meal (PSM), which is a by-product of edible oil production, was achieved using combined column chromatography over macroporous and polyamide resins. To optimize the RA enrichment process, the performance and separation characteristics of nine selected macroporous resins with different chemical and physical properties were investigated. SP825 resin was the most effective: the content of RA increased from 0.27% in the original extract to 16.58% in the 50% ethanol fraction (a 61.4-fold increase). During further purification treatment on polyamide resin, 90.23% pure RA could be obtained in the 70% ethanol fraction. RA with a higher purity (>95%) could also be easily obtained using one crystallization operation. The proposed method is simple, easily operated, cost-effective, and environmentally friendly and is suitable for both large-scale RA production and waste management.

High-expression ß(1) adrenergic receptor/cell membrane chromatography method based on a target receptor to screen active ingredients from traditional Chinese medicines.

ß-Adrenergic receptors are important targets for drug discovery. We have developed a new ß1 -adrenergic receptor cell membrane chromatography (ß1 AR-CMC) with offline ultra-performance LC (UPLC) and MS method for screening active ingredients from traditional Chinese medicines. In this study, Chinese hamster ovary-S cells with high ß1 AR expression levels were established and used to prepare a cell membrane stationary phase in a ß1 AR-CMC model. The retention fractions were separated and identified by the UPLC-MS system. The screening results found that isoimperatorin from Rhizoma et Radix Notopterygii was the targeted component that could act on ß1 AR in similar manner of metoprolol as a control drug. In addition, the biological effects of active component were also investigated in order to search for a new type of ß1 AR antagonist. It will be a useful method for drug discovery as a leading compound resource.

Development of a new column switching method for simultaneous speciation of selenometabolites and selenoproteins in human serum.

A method for the simultaneous speciation of selenoproteins and selenometabolites in human serum has been developed on the basis of in series three dimensional chromatography: size exclusion, affinity and anion exchange high performance liquid chromatography (3D/SE-AF-AEC-HPLC), using different columns of each type and hyphenation to inductively coupled plasma-(quadrupole) mass spectrometry (ICP-qMS). The method allows the quantitative simultaneous analysis of selenoprotein P (SeP), extracellular glutathione peroxidase (eGPx), selenoalbumin (SeAlb), selenite and selenate in human serum using species-unspecific isotope dilution (SUID). The 3D chromatographic separation is proposed to remove typical spectral interferences in this matrix from chloride and bromide on (77)Se ((40)Ar(37)Cl), (80)Se ((79)Br(1)H) and (82)Se ((81)Br(1)H). In addition, a previous method based on 2D/SE-AF-HPLC is proposed as a simple alternative when low molecular mass selenium species are absent in the samples. The method is robust, reliable and fast with typical chromatographic runtime less than 35min. Detection limits are in the range of 0.2-1.3ng of Seg(-1). Method accuracy for determination of total protein-bound to Se was assessed by analyzing an human serum reference material (BCR-637) certified for total Se content and method reliability checked in samples of human serum providing results in good agreement with the total selenium concentration. In addition, the application of the method to commercial human serum and plasma reference materials for quality control analysis, certified for total Se, has provided, for the first time, indicative levels of selenium containing proteins in these samples.

Separation and purification of flavonoid from Taxus remainder extracts free of taxoids using polystyrene and polyamide resin.

An efficient separation process of flavonoid from Taxus wallichiana var. mairei remainder extracts free of taxoids was developed in this study. AB-8 macroporous resin and polyamide resin offered the fine adsorption capacity, and its adsorption rate at 30°C fitted well to the Langmuir and Freundich isotherms. Resin dynamic adsorption and desorption experiments were conducted to optimize the separation process of total flavonoids from T. wallichiana var. mairei remainder extracts free of taxoids. The optimum parameters for adsorption by AB-8 resin were as follows: (1) the concentration of flavonoids in a sample solution of 5.61 mg/mL with a processing volume of 2 bed volume (BV) (60 mL); (2) for desorption, ethanol-water (80:20, v/v), with 6 BV as an eluent at a flow rate of 2 BV/h. After a one-run treatment with AB-8 resin, the content of flavonoids was increased 5.10-fold from 4.05 to 20.65%. The optimum parameters for adsorption by polyamide resin were as follows: processing volume of 2 BV (30 mL); for desorption, ethanol-water (70:30, v/v), with 8 BV as an eluent at a flow rate of 2 BV/h. After one-run treatment with polyamide resin, the content of total flavonoids increased from 20.65 to 65.21%. The method will provide a potential approach for large-scale separation and purification of flavonoid for its wide pharmaceutical use.

Enrichment and antioxidant properties of flavone C-glycosides from trollflowers using macroporous resin.

Orientin, vitexin and other flavone C-glycosides are functional ingredients abundant in trollflowers. In this study, an efficient method for enrichment of these ingredients from the flowers of Trollius chinensis Bunge was developed using macroporous resin. Separation characteristics of six typical macroporous resins were investigated by static adsorption/desorption and dynamic separation experiments, and HPD450 was selected as optimal one. Dynamic adsorption/desorption experiments on HPD450 columns were conducted to obtain the optimal parameters, followed by a scale-up experiment. Six fractions, TC-1-TC-3 together with their acid hydrolysates were further prepared to evaluate their antioxidant capacities by 2,2-diphenyl-1-picrylhydrazyl radical and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonate) radical cation scavenging assays. They all have notable concentration-dependent antioxidant activities, with TC-1 showing strong antioxidant capacity higher than orientin. The separation process was high-efficient, low-cost and environmental-friendly, which could afford a potential approach for industrial applications.

Solanidine isolation from Solanum tuberosum by centrifugal partition chromatography.

The aim of this investigation was the preparative isolation of solanidine (aglycone of the two main potato glycoalkaloids: α-chaconine and α-solanine) from fresh Solanum tuberosum (cv. Pompadour) material by implementing a new preparation scheme using centrifugal partition chromatography (CPC). A setup for obtaining solanidine by hydrolysis of the glycoalkaloids found in the skin and sprouts of S. tuberosum was first developed. Then its isolation was carried out by the development of CPC conditions: the solvent system used for separation was ethyl acetate/butanol/water in the ratio 42.5:7.5:50 v/v/v, 0.6 g of crude extract were separated with a 8 mL/min flow rate of mobile phase while rotating at 2500 rpm. A run yielded 98 mg of solanidine (86.7% recovery from the crude extract) in a one-step separation. The purity of the isolated solanidine was over 98%. Thus, CPC has proven to be the method of choice to get solanidine of very high purity from S. tuberosum biomass in large quantities.

Nonlinear alignment of chromatograms by means of moving window fast Fourier transfrom cross-correlation.

The preprocessing of chromatograms is essential to modern chromatography for further qualitative and quantitative analysis, especially when chromatographic instruments are used for herb products analysis involving large number of samples. To accurately compare and analyze the obtained chromatograms, it is necessary to preprocess, especially align retention time shifts. Here moving window fast Fourier transform (FFT) cross-correlation is introduced to perform nonlinear alignment of high-throughput chromatograms. Since elution characteristics of chromatograms will produce local similarity in retention time shifts, moving window procedure seems to be a better substitute of segmentation steps. The retention time shifts can be calculated and accelerated by FFT cross-correlation. The artifacts can be detected and eliminated from the retention time shifts profile since the continuity of moving window procedure. The proposed method is demonstrated in comparison with recursive alignment by FFT on chromatographic datasets from herb products analysis. It is shown that the proposed method can address nonlinear retention time shift problem in chromatograms with the simple moving window procedure, which will not introduce segments size optimization problem. In additional, the parameters are intuitive and easy to adjust, which makes it off-the-shelf toolbox for alignment of chromatograms.

Simultaneous separation and purification of total polyphenols, chlorogenic acid and phlorizin from thinned young apples.

An efficient preparative separation of polyphenols from thinned young apples (TYA) has been developed in the present study. X-5 resin was verified to offer the best adsorption capacity and desorption ratio for total polyphenols among the eight macroporous resins investigated. Influential factors, such as pH value and concentration of feeding solution, strippant, and adsorption isotherm to the separation of total polyphenols, were successively investigated on X-5 resin. After one run treatment, the phenolic content was increased 2.12-fold from 35.17% to 74.64%, with a recovery yield of 89.35%. Chlorogenic acid and phlorizin were selectively purified using X-5 and polyamide resins. The contents of chlorogenic acid and phlorizin were 15.20% and 97.52% with recovery yields of 89.16% and 64.95%, respectively. The method developed will provide a potential approach for its wide industrial and pharmaceutical use.

Preparation of clinical-scale 99Mo/99mTc column generator using neutron activated low specific activity 99Mo and nanocrystalline γ-Al2O3 as column matrix.

INTRODUCTION: Preparation of clinical-scale (99)Mo/(99m)Tc generator using (n,γ) activated low specific activity (99)Mo and nanocrystalline γ-Al(2)O(3) as a high capacity sorbent matrix is attempted. METHODS: Nanocrystalline γ-Al(2)O(3) was synthesized by 'solid state mechanochemical' reaction of aluminum nitrate with ammonium bicarbonate. Experimental parameters were optimized to effectively separate (99m)Tc from (99)Mo using this sorbent as the column matrix. The performance features of a 13 GBq (350 mCi) (99)Mo/(99m)Tc generator using this sorbent and (99)Mo produced by (n,γ) route having specific activity 12.9-18.5 GBq/g were evaluated for 10 days. RESULTS: The sorbent possessed the requisite selectivity for (99)Mo and demonstrated a maximum sorption capacity of 200 ± 5mg Mo/g, which is ~10 times higher than that of ordinary acidic alumina. The overall yield of (99m)Tc was >80%, with radionuclidic purity >99.99% and radiochemical purity >99%. The yield of (99m)Tc varied from 7.8 to 2.1 GBq in the eluate for the six days of operation of the generator. The radioactive concentration of (99m)Tc eluted was adequate for the formulation of radiopharmaceuticals. The performance of the generator remained consistent over an extended period of 10 days. The eluted (99m)Tc was suitable for the formulation of (99m)Tc-DMSA and (99m)Tc-EC resulting in high radiolabeling yields (>98%). CONCLUSION: The effectiveness of γ-Al(2)O(3) as a new generation sorbent in the development of clinically useful (99)Mo/(99m)Tc generator using low specific activity (99)Mo and yielding (99m)Tc with adequate radioactive concentration and high purity suitable for formulation of radiopharmaceuticals is demonstrated.

Development of a novel adsorptive membrane chromatographic method for the fractionation of polyphenols from bilberry.

A novel membrane chromatographic method with a membrane adsorber (Sartobind S) has been developed on the laboratory scale that allows a fractionation of bilberry (Vaccinium myrtillus) constituents into the following three groups of polyphenols: anthocyanins, copigments, and polymers. By using this methodology, a pure anthocyanin fraction free of other copigments and polymeric phenols can be obtained. Using this approach, it provides fractions allowing a more thorough testing of the biological effects of the individual groups of bilberry polyphenols as well as the study of possible synergistic effects between these different groups of bioactive constituents from bilberry.