Effect of various staining beverages on the color stability of CAD/CAM PMMA denture teeth: An in vitro study.

OBJECTIVE: This study aimed to compare the color change of computer-aided design (CAD)/computer-aided manufacturing (CAM) polymethyl methacrylate (PMMA) denture teeth and conventional acrylic teeth after immersion in three staining beverages (coffee, red tea, and cola) for a day, 7 days, and 30 days. MATERIALS AND METHODS: Group 1: Conventional acrylic teeth (n = 32). Group 2: Milled CAD/CAM teeth out of PMMA disc (n = 32). The specimens of each material were further divided into four subgroups: (1) Control group, distilled water (n = 16). (2) Red tea solution (n = 16). (3) Coffee solution (n = 16). (4) Cola (n = 16). The color change ( ∆ E $\unicode{x02206}E$ ) was assessed using a spectrophotometer at four time points: at the baseline (t0 ), on the 1st day (t1 ), on the 7th day (t2 ), and the 30th day (t3 ) of immersion. Kolmogorov-Smirnov test was applied, followed by performing independent samples t test, one-way analysis of variance and post-hoc Tukey tests to compare the color change values at different time points. RESULTS: The mean score of NBS values of the coffee solution indicates perceivable color change at the end of the 30th day in the conventional acrylic teeth group. It was 0.843 ± 0.395 at t1 , then increased to 1.017 ± 0.477 at t2 and to 2.259 ± 1.059 at t3 . There is a statistically significant difference (p < 0.05) in color change values between both tooth types at the end of the 30th day of immersion in red tea solution and a statistically significant difference at the end of the 7th day (p < 0.05) and the 30th day (p < 0.05) of immersion in coffee solution. CONCLUSIONS: CAD/CAM PMMA teeth are more color stable than conventional acrylic teeth after 30 days of immersion in coffee and red tea solution.

Effects of two novel denture cleansers on multispecies microbial biofilms, stain removal and the denture surface: an in vitro study.

BACKGROUND: The continuously increasing demand for removable denture appliances and the importance of adequate denture cleaning have led to the development of various denture cleansing products. The aim of this study was to evaluate the efficacy of two novel denture cleansing agents (GE and TM) and three commonly available cleansers (0.5% sodium hypochlorite; NaClO, 0.12% chlorhexidine gluconate; CHX, and Polident®; POL) on multispecies microbial biofilm formation, stain removal and physical properties of dentures. METHODS: The antimicrobial activities of denture cleansing agents were determined against major oral opportunistic pathogens including Streptococcus mutans, Staphylococcus aureus, Escherichia coli and Candida albicans, using time-kill assays. Multispecies microbial biofilms grown on acrylic resins for 72 h were generated to determine the antibiofilm effects of cleansing agents by confocal laser scanning microscopy (CLSM). Evaluations of the tea and coffee stain removal properties and the alterations in the physical properties of dentures were also performed. The toxicity of cleanser residues released from denture acrylics to fibroblast cells was investigated using MTT assay. RESULTS: All denture cleansing agents tested could effectively kill oral bacteria and Candida albicans. Furthermore, after immersion for more than 3 h, the cleansers Polident®, GE and TM could efficiently penetrate and inhibit multispecies denture biofilms with effects similar to 10 min of immersion in 0.5% NaClO. However, immersion in 0.12% CHX for 20 min showed less antibiofilm activity. The NaClO solution had the highest efficacy for removing stains from the artificial teeth. Conversely, the CHX solution enhanced tea and coffee staining, and the teeth immersed in this solution showed clinically unacceptable colour changes (ΔE > 5.5). However, the colour differences of teeth stained and immersed in POL, GE and TM cleansers were in the clinically acceptable range. There was no significant difference among the POL, GE and TM cleansers in terms of stain removal efficacy. The cleansers GE and TM did not alter the surface roughness and colour of the materials, moreover the residues of both cleansers did not exhibit cytotoxicity. CONCLUSION: Two novel denture cleansing agents containing natural products, GE and TM exhibited effective antimicrobial activity, antibiofilm and stain removal capabilities without toxicity or disturbance of the physical properties of acrylics.

Management of Chronic Atrophic Candidiasis (Denture Stomatitis)-A Narrative Review.

One of the most common oral diseases affecting people wearing dentures is chronic atrophic candidiasis or denture stomatitis (DS). The aim of the paper is to provide an update on the pathogenesis, presentation, and management of DS in general dental practice settings. A comprehensive review of the literature published in the last ten years was undertaken using multiple databases, including PubMed via MEDLINE, EMBASE, and Scopus. The eligible articles were analyzed to identify evidence-based strategies for the management of DS. Despite its multifactorial nature, the leading cause of DS is the development of oral Candida albicans biofilm, which is facilitated by poor oral and denture hygiene, long-term denture wear, ill-fitting dentures, and the porosity of the acrylic resin in the dentures. DS affects between 17 and 75% of the population wearing dentures, with a slight predominance in elderly females. The mucosal denture surfaces and posterior tongue are the common sites of DS, and the affected areas exhibit erythema, the swelling of the palatal mucosa and edema. Oral and denture hygiene protocols, adjusting or re-fabricating poorly adapting dentures, smoking cessation, avoiding nocturnal denture wear, and the administration of topical or systemic antifungals are the mainstay of management. Alternate treatments such as microwave disinfection, phytomedicine, photodynamic therapy, and incorporation of antifungals and nanoparticles into denture resins are being evaluated for the treatment of DS but require further evidence before routine use in clinical practice. In summary, DS is the most common oral inflammatory lesion experienced by denture wearers. Most patients with DS can be managed in general dental practice settings. Effective management by general dental practitioners may be supported by a thorough understanding of the pathogenesis, the recognition of the clinical presentation, and an awareness of contemporary treatment strategies.

Determining growth inhibition of Candida albicans biofilm on denture materials after application of an organoselenium-containing dental sealant.

STATEMENT OF PROBLEM: Denture stomatitis is a chronic inflammatory condition caused by the formation of Candida albicans biofilm on denture bases. It is associated with aggravating intraoral pain, itching, and burning sensations. It can also potentiate cardiovascular diseases and aspiration pneumonia. The problem has thus far eluded efficient, toxic-free, and cost-effective solutions. PURPOSE: The purpose of this in vitro study was to investigate the effectiveness of organoselenium to inhibit the formation of C. albicans biofilm on the surface of acrylic resin denture base materials when it is either incorporated into the acrylic resin material or coated on the denture surface as a light-polymerized surface sealant. MATERIAL AND METHODS: Sixty heat-polymerized polymethyl methacrylate disks were fabricated and assigned to 4 groups (n=15): disks coated with a light-polymerized organoselenium-containing enamel surface sealant (DenteShield), disks impregnated with 0.5% organoselenium (0.5% selenium), disks impregnated with 1% organoselenium (1% selenium), and disks without organoselenium (control). C. albicans biofilm was grown on each disk which had been placed in a well of the microtiter plate containing 1-mL brain heart infusion broth inoculated with C. albicans. The plates were incubated aerobically at 37 °C for 48 hours. A confocal laser scanning microscope was used to determine the biofilm thickness, biomass, and live/dead cell ratio. Biofilm morphology was examined with scanning electron microscopy, whereas microbial viability was quantified by the spread plate method. The data were analyzed by using ANOVA and Tukey-Kramer multiple comparisons (α=.05). RESULTS: The microbial viability, biofilm thickness, biofilm biomass, and live/dead cell ratio were lower (P<.001) on disks in the test groups (DenteShield, 0.5% selenium, 1% selenium) when compared with the control group, with these variables being lowest in the 0.5% selenium and 1% selenium groups. The 0.5% selenium and 1% selenium groups did not differ significantly from each other in any of the variables (P>.05). Scanning electron microscope images showed inhibition of both biofilm growth and yeast to hyphae transition in the DenteShield, 0.5% selenium, and 1% selenium groups, with visible disruption of the biofilm morphology. CONCLUSIONS: The present study demonstrated that organoselenium, whether incorporated into or coated on the surface of an acrylic resin denture base material, has the potential to inhibit Candida albicans biofilm growth on denture surfaces and as such can be clinically useful for the prevention of denture stomatitis.

Management of Denture Infection with Phytomedicine.

Natural teeth are an integral part of the masticatory system. Absence of dentition subjects the individual to compromised oral function, facial appearance and phonetics. Rehabilitation with dental prosthesis is imperative to restore form and masticatory activity. Currently, fabrication of removable and fixed prosthesis has become most predictable. Nonetheless, there is an increased prevalence of oral stomatitis observed over the years in edentulous individuals wearing removable dentures. Amongst the many pathogens that cause denture infections, Candida albicans is assumed to be the most virulent opportunistic agent. Different methods, such as mechanical, chemical, chemicmechanical, and pharmacological are tried to fight such infections. Regardless of various management strategies developed to treat denture stomatitis, the research continues to evolve the most optimal one. Improper oral and or denture hygiene maintenance, surface irregularities on denture, persistence of xerostomia and associated systemic illness pose risk for exaggeration of the disease. In extreme conditions, the development of aspiration pneumonia in geriatric patients is considered a threat to both dental and medical specialists. Therapeutic administration of synthetic anti-microbial drugs, along with meticulous oral hygiene maintenance are recommended protocols till date. However, limitations such as antibiotic resistance, side effects, counter drug reactions, cost of the medicaments predispose to origin of natural herbal products to treat denture stomatitis. Vast array of plant products are studied in previous literature, yet no definitive edge of one over the other is proven. This article intends to provide a mini-review on the different organic plant materials, also called as phytomedicines used for the treatment of candida associated denture stomatitis (CADS).

Comparison of Surface Roughness and Color Stability of Different Denture Characterizing Composite Resins: The Effect of Different Surface Treatments.

PURPOSE: This study aimed to investigate the effect of surface treatment and type of composite resin material on the color stability and surface roughness of different denture characterizing composites. MATERIALS AND METHODS: Two nanohybrids [Gradia Plus Gum, (GP) and SR Nexco Paste Gingiva, (SR)] and one microhybrid gingiva-colored composite resin [Amaris Gingiva, (AG)] were investigated. A total of 120 disk-shaped samples were prepared, 40 of each material. Samples were divided into two groups (n = 20) for each material according to the surface treatment applied: conventional polishing (control) and coated with a sealant in addition to the surface polishing. All groups were thermocycled. The surface roughness (Ra) was measured using a profilometer after thermal cycling. The samples were then divided into 2 subgroups (n = 10) and stored for 7 days in distilled water or coffee solution. Color differences (ΔE00 ) were calculated with a spectrophotometer. Results were evaluated with Kruskal-Wallis and Mann-Whitney U statistical analysis. RESULTS: The type of denture characterizing composite material and surface treatment method revealed statistically significant differences for the ΔE00 (after immersion both in coffee and distilled water) and the Ra values of denture characterizing composite (p < 0.001 for both). All sealed groups showed significantly higher Ra than the all polished groups. Both in the polished groups and the sealant applied groups, the GP had the highest mean Ra values (0.29 ±0.05 µm and 0.47 ±0.09 µm, respectively). It was followed by SR (0.23 ±0.06 µm and 0.41 ±0.10 µm, respectively), and AG groups (0.20 ±0.06 µm and 0.39 ±0.09 µm, respectively). According to the mean ΔE00 results, all composite groups showed significantly higher ΔE00 values immersed in coffee solutions compared to distilled water. In coffee solutions, the highest ΔE00 was observed in the polished GP (1.90 ±0.40), and the lowest ΔE00 was observed in the polished SR (0.97 ±0.36). The sealed groups showed higher ΔE00 than the polished groups, except for GP. CONCLUSIONS: The surface roughness value of sealant applied groups were significantly higher than those of the polished groups. The surface sealant application significantly increased the staining of all composite groups compared to conventional polishing, except for GP.

Eating Advice for People Who Wear Dentures: A Scoping Review.

OBJECTIVE: A scoping review of available advice to address eating problems experienced by people who wear dentures was conducted in accordance with the PRISMA statement. The objective was to identify and map type, volume, and content of the available eating advice. METHODS: Medline, CINAHL, and grey literature databases and Google were searched. Relevant content pertaining to study type, peer-review vs. grey literature, country of origin, advice content, and methods to evaluate effectiveness was mapped. RESULTS: Of the 4591 records identified from peer-reviewed literature, 56 full papers underwent duplicate screening, resulting in 26 papers (from Germany (n = 1), Europe (n = 1), India (n = 2), Japan (n = 7), UK (n = 6), USA (n = 6), or other (n = 3)) being included in the review. These yielded 18 different items of relevant eating advice. Of the 258 screened websites, 63 were included, yielding 30 different items of eating advice. The most-cited advice was to eat soft food and avoid hard and sticky food, cut food into bite-sized pieces, and chew on both sides of the mouth and chew slowly and thoroughly. The identified advice was not supported by reference to peer-reviewed evidence. Advice included some conflicting messages and some advice was non-compliant with authoritative nutritional advice (e.g., avoid red meat, take a vitamin supplement). CONCLUSION: There is support for providing eating advice at the time of denture provision. A broad range of advice based on clinical experience to support people who wear dentures to overcome the functional limitations exists. However, the efficacy of this advice in improving diet and eating experience has not been tested.

Anticandidal efficacy on polymide based denture resin using Photodynamic therapy, chemical and herbal disinfectants and their effect on surface roughness and hardness.

AIM: The present study aimed to evaluate the anticandidal effectiveness of PDT, DL, Triphala, CHX, and NE and their effects on Ra and the hardness of polyamide denture base colonized with C. Albicans. MATERIAL AND METHODS: A total of 50 thermo-injected polyamide denture resins were constructed and inoculated by the American Type Culture Collection (ATCC) of C. albicans in an in-vitro setup. The specimens were arbitrarily allocated into five groups, pre-candida count was measured then subjected to the diverse polyamide denture disinfection methodologies: Group 1: PDT, Group 2: Diode Laser, group 3: Triphala, group 4: 0.12% CHX (Control) and group 5 Neem extract. After disinfection protocol, post-candida count (CFU/ml) was assessed. Surface roughness and surface hardness of polyamide dentures were evaluated and statistical differences in the Ra and Vickers hardness was also assessed. Statistical analysis was performed for CFU/mL (log10) for exposed C. albicans by two-way ANOVA and Tukey's multiple test (p>0.05). For normality of the data, Kolmogorov Smirnov test was executed. RESULTS: The highest anti-microbial efficacy against Candida colonies was displayed by chemical control group 0.12% CHX (11.39 ± 1.8 CFU/ml). This was comparable to herbal NE (12.45 ± 2.9 CFU/ml) (p>0.05). There was no statistical difference found in the surface hardness values among the disinfected groups. Group 2: DL (1.32 ± 0.13 µm) showed the highest Ra value comparable to group 1: PDT (1.21 ± 0.22 µm) CONCLUSION: Polyamide denture base colonized with C. Albicans and disinfected with 0.12% Chlorhexidine and Neem extract demonstrated the highest antimicrobial efficacy with decreased surface roughness and no alteration in denture hardness.

Disinfection of acrylic denture resin polymer with Rose Bengal, Methylene blue and Porphyrin derivative in photodynamic therapy.

AIM: The study aimed to assess the effect of in-vitro chlorhexidine and antimicrobial photodynamic therapy (aPDT) disinfection protocols against acrylic resin specimens colonized with S. mutans, S. aureus, E. coli, and C. albicans. MATERIAL AND METHODS: Reference strains of S. mutans, S. aureus, E. coli, and C. albicans were tested. Sixteen blocks of acrylic specimens were prepared by heat-cure acrylic resin and contaminated by in-vitro biofilm growth. Specimens in group 1, group 2 and group 3 were treated with Rose Bengal (RB), methylene blue (MB) 500 mg/L and porphyrin derivative (PD) 5 ml respectively, for the sensitization of biofilms. All photosensitizers (PS) were activated by LED at different wavelength. CHX was prepared in sterile distilled water and applied for 60 s. Each contaminated specimen was sprayed on all its surfaces with the aforementioned photosensitizers and control CHX. One-way analysis of variance (ANOVA) model was used to test the effect of the treatments and Tukey multiple comparison tests to compare means OF CFU/mL (log10) for exposed E. coli, C. albicans, S aureus, and S. mutans RESULTS: Specimens treated with 0.12% CHX (control) demonstrated a significant reduction in CFU/mL (log10) for exposed E. coli; 2.04±0.07 CFU/mL, C. albicans; 2.09±0.85 CFU/mL, S aureus; 3.04±0.11 CFU/mL, and S. mutans; 2.54±0.91 CFU/mL. The intragroup comparison revealed E.coli did not exhibit a decrease in reduction CFU/mL (log10) when acrylic resin irradiated with RB 5 µm. Whereas, CFU/mL (log10) values of S.aureus; 3.62±0.68 and S.mutans; 3.41±0.13 plummeted (p<0.05). Intergroup comparison showed E.coli values to display comparable reduction when disinfected with MB 500 mg/L and 0.12% CHX; 3.16±0.34 and 2.04±0.07 CFU/mL (log10) (p<0.05). CONCLUSION: Photosensitizers (RB, MB, PD) are selective in reducing bacterial count on acrylic resin blocks. CHX was found to be effective against all bacteria E.coli, C.albicans, S.aureus, and S.mutans at a concentration of 0.12%.

Color stability of three dimensional-printed denture teeth exposed to various colorants / 대한치과보철학회지

PURPOSE: This study evaluated color stability of Dentca 3D-printed denture teeth, in comparison to color stabilities of four conventional types of denture teeth, upon being immersed in various colorants.MATERIALS AND METHODS: Four types of conventional prefabricated denture teeth (Surpass, GC, Artic 6, Heraeus Kulzer, Premium 6, Heraeus Kulzer, Preference, Candulor), 3D-printed denture teeth (Dentca); and Z250 (Filtek Z250, 3M ESPE) were prepared for testing. The samples were immersed in erythrosine 3%, coffee, cola, and distilled water (DW) at 37℃. Color change (ΔE) was measured by spectrophotometer before immersion and at 7, 14, and 21 days after immersion. One-way analysis of variance was performed along with Tukey's honestly significant difference multiple comparisons test (P<.05).RESULTS: No great difference was observed between the color change of Dentca denture teeth and that of conventional denture teeth in most cases (P>.05). The color change of Dentca denture teeth immersed in erythrosine 3% was greater than that of Surpass (ΔE = 0.67 ± 0.25) after 1 week; Artic 6 (ΔE = 1.44 ± 0.38) and Premium 6 (ΔE = 1.69 ± 0.35) after 2 weeks; and Surpass (ΔE = 1.79 ± 0.49), Artic 6 (ΔE = 2.07 ± 0.21), Premium 6 (ΔE = 2.03 ± 0.75), and Preference (ΔE = 2.01 ± 0.75) after 3 weeks (P<.05).CONCLUSION: A color change was observed in Dentca denture teeth when immersed in some colorants; however, the maximum value of ΔE for Dentca denture teeth was within the clinically acceptable range.

Hydroalcoholic Extract of Eugenia uniflora as Denture Disinfectant: Antimicrobial Activity and Effect on the Physical Properties of Polymethylmethacrylate

Abstract To the moment, there is no ideal substance for home-based denture disinfection. This study assessed in vitro the antimicrobial effect of the hydroalcoholic extract of Eugenia uniflora and the effect on the physical properties of denture polymethylmethacrylate (PMMA). Candida albicans, Staphylococcus aureus, and Klebsiella oxytoca were isolated from samples of saliva collected from denture wearers. The extracts were produced in three concentrations, according to the Brazilian Pharmacopeia. One hundred eighty-eight disc-shaped specimens of thermopolymerizable PMMA were prepared and randomly allocated to five treatment groups: sterile saline solution (0.85%; control); chlorhexidine digluconate (0.2%); and hydroalcoholic extract of E. uniflora (0.2%, 0.8%, and 1.16%). The specimens were disinfected for 8 hours/day for 30 days. Adherence of microorganisms to the surface, PMMA surface roughness, and color stability were assessed. Inferential statistics were performed with one- and two-way ANOVA/Tukey test, and Kruskal Wallis, Mann-Whitney U, and paired t-tests, at α=0.05. The extract of E. uniflora at 0.2% and 1.16% reduced the microbial load of K. oxytoca, while chlorhexidine digluconate significantly reduced microbial load of all microrganisms. Microbial adherence at day 10 was reduced by all experimental substances (p<0.001). Surface roughness was not affected by the disinfecting substances (p>0.05). Nevertheless, all experimental groups produced unacceptable color change at the end of the disinfection protocol (p<0.001). The non-adherent potential against microorganisms isolated from the oral cavity confirm the potential of use of the hydroalcoholic extract of E. uniflora as a denture disinfectant. Yet, unacceptable color changes may occur, regardless of extract concentration.

Assessment of sensitivity of selected Candida strains on antimicrobial photodynamic therapy using diode laser 635 nm and toluidine blue - In vitro research.

BACKGROUND: Photodynamic therapy is believed to be a promising treatment for Candida infections. This study evaluated the efficacy of antimicrobial photodynamic therapy (aPDT) using the 635 nm diode laser light and toluidine blue (TB) in the elimination of selected Candida species cultured on acrylic surface. METHODS: 108 acrylic plates (Methyl Methacrylate Polymer, routinely used for the production of prosthetic dentures) were placed in three sterile Petri dishes and poured with prepared suspensions of Candida strains: C. albicans, C. glabrata, and C. krusei. After all procedures of fungi incubation, fungal biofilm was visible on the plates' surfaces. The acrylic plates were divided into nine study groups (B) and nine control groups (K) for further experiments. In the study groups, the acrylic plates with fungal biofilm were immersed in TB and afterwards laser irradiation was applicated with different exposure parameters (groups: B1 - 400 mW, 24 J/cm2, 30 s; B2 - 300 mW, 18 J/cm2, 30 s; B3 - 200 mW, 12 J/cm2, 30 s) separately for each Candida species. The control groups contained following parameters: no exposure to laser light or TB, treatment only with TB without laser irradiation, or only laser irradiation without previous immersion in TB. Calculations of colony forming units (CFUs) were conducted by using aCOlyte (Synbiosis). Differences in CFUs were analyzed by the Wilcoxon test. RESULTS: In all study groups, the reduction in CFUs was statistically significant. The differences in CFUs before and after intervention were insignificant. The K3 C.a. control group showed a statistical reduction of Candida albicans after laser irradiation. CONCLUSION: Our study confirmed the efficacy of aPDT against C. albicans, C. glabrata and C. krusei being dependent on the laser parameters and the type of fungus. The advantage of this study is the validation of aPDT effectiveness in in vitro studies to transpose this data into future clinical trials using photodynamic therapy in the treatment of oral candidiasis.

Total tooth loss without denture wear is a risk indicator for difficulty eating among older adults with intellectual disabilities.

OBJECTIVES: This study tests whether total tooth loss is a risk indicator for difficulty eating among a population with intellectual disability and whether complete denture wear mediates this risk. METHODS: Dentate status and difficulty eating were reported for a Nationally representative sample of 690 adults over forty with intellectual disabilities as part of The Intellectual Disability Supplement to The Irish Longitudinal Study on Ageing (IDS-TILDA). A logistic regression model tested the relationship between the Difficulty eating and Dentate status, controlling for the effects of other factors. RESULTS: Of the 690 participants, 505 had some teeth (Group 1), 56 had no teeth and reported wearing dentures (Group 2) and 129 had no teeth, not using dentures (Group 3). A parsimonious regression model was developed including all 406 cases with no missing data. Adjusting for the effects of other factors, it was found that, compared to Group 1, the odds of difficulty eating was twice as great (OR = 2.01, 95% CI = 1.02-4.03) among people without teeth, not using dentures (Group 3). Conversely, edentulous participants who had dentures (Group 2) had far lower odds (OR = 0.21, 95% CI = 0.06-0.64) of reporting difficulty eating compared with Group 1. CONCLUSIONS: For adults with ID, total tooth loss was predictive of difficulty eating only when untreated. People with disabilities should be encouraged to maintain a functional dentition through preventive and conservative treatment. When adults with ID become edentulous, oral rehabilitation may reduce the risk of difficulty eating. Dental assessment should be undertaken if people with ID present with difficulty eating.

Prosthetic rehabilitation for a maxillectomy patient using 3D printing assisted closed hollow bulb obturator: a case report

This case report presents a closed hollow bulb obturator made by 3D printing for a maxillectomy patient. Final impression was taken according to the instructions and impression trays provided by the Magic denture™ system. Vertical dimension, facial appearance, and retention had been checked with the try-in denture. The try-in denture was corrected and adjusted to fulfill the demand of the patients, then these were reflected to the final design of the denture. The defect area was designed as a closed hollow bulb shape to reduce the weight and to provide uniform thickness of the denture. The patient satisfied with the esthetics and function of the denture.

Efficacy of Various Pretreatments on the Bond Strength of Denture Teeth to Denture Base Resins.

OBJECTIVE: This in vitro study evaluated the shear bond strength (SBS) of heat-cured denture base resin (PMMA) to acrylic resin teeth treated with different pretreatments, especially laser irradiation of different powers (1-4 W). MATERIALS AND METHODS: The acrylic resin teeth were separated into seven groups (n = 10) for the following different pretreatments: control group (no surface treatment) (G1), grinding with a tungsten carbide bur (G2), sandblasting (G3), and erbium, chromium: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) laser irradiation at 1 W, 2 W, 3 W, 4 W output powers in (G4-7), respectively. Test specimens were produced according to the PMMA manufacturers' instructions and were subjected to a SBS test at a crosshead speed of 1 mm/min until fracture. Debonded surfaces were evaluated by a stereomicroscope for the type of failure. SEM (scanning electron microscope) analyses were done to estimate the surface changes of the acrylic resin teeth. The data were submitted using a one-way ANOVA and post hoc Tukey-Kramer multiple comparison tests (p = 0.05). RESULTS: The highest bond strength was obtained in G3, and similar SBS values were considered in other groups, and no significant differences were found among the surface treatments and the control group (p < 0.05). All groups had a high percentage of adhesive failures. CONCLUSIONS: Laser irradiations promote surface topography alterations. However laser irradiation of the adhesive surface was found ineffective. The SBS of acrylic resin teeth to a PMMA denture base material is independent of the surface pretreatments Er,Cr:YSGG laser irradiation, sandblasting, and grinding with a carbide bur. All the surface treatments provided a similar bond between the acrylic denture base and the teeth.

Effectiveness of non-fluoride and fluoride dentifrices for denture hygiene.

OBJECTIVE: To compare the effectiveness of commonly used herbal/non-fluoride with fluoride dentifrices in order to eliminate pathogenic oral microorganisms from denture base material. MATERIALS AND METHODS: Heat-polymerized acrylic resin specimens (n = 288) were divided into three groups and each group inoculated with three various microorganisms (n = 96 for each) Candida albicans, Staphylococcus aureus and Pseudomonas aeruginosa (P. aeruginosa). Contaminated specimens were randomly assigned to the application of six herbal/non-fluoride and three fluoride dentifrices. These specimens were divided into two groups: negative and positive control (n = 3 for each). All acrylic specimens were incubated at 37 °C for 24 h for samples inoculated with bacterial strains and 37 °C for 48 h for samples inoculated with yeast strains. After the incubation period, all brain-heart infusion broths that contained disinfectant acrylic specimens were cultured on 5% sheep blood agar for bacterial counts and Sabouraud dextrose agar for yeast counts. The number of colony-forming units per millilitre (CFU/mL) were calculated. The results were analysed by Mann-Whitney U and Kruskal-Wallis tests (p = .05). RESULTS: Both herbal/non-fluoride and fluoride dentifrices were effective against Candida albicans. However, fluoride dentifrices were comparatively better than the herbal/non-fluoride dentifrices against Staphylococcus aureus and P. aeruginosa. CONCLUSIONS: Herbal dentifrices could be used, especially among the elderly who lack a degree of manual dexterity during the rinsing of dentifrice chemicals from their dentures.

Effect of sodium hypochlorite and Ricinus communis solutions on control of denture biofilm: A randomized crossover clinical trial.

STATEMENT OF PROBLEM: The prevalence of complete edentulism remains high in the elderly, and previous data have shown that poor denture hygiene is common among patients with edentulism. PURPOSE: The purpose of this randomized crossover trial was to evaluate the efficacy of denture cleansers in terms of biofilm removal, antimicrobial action, and the remission of denture stomatitis. MATERIAL AND METHODS: Fifty denture wearers with denture stomatitis were instructed to brush their dentures (brush and soap) and to soak them (20 minutes/14 days) in 4 solutions, as follows: C (control), 0.85% saline; SH1, 0.1% sodium hypochlorite; SH2, 0.2% sodium hypochlorite; and RC, 8% Ricinus communis. The biofilm in the intaglio surface of maxillary dentures was stained, photographed, and quantified by software (Image Tool). It was then collected (brushed with saline solution), and the obtained suspension was diluted (100 to 10-3) and seeded (50 µL) in CHROMagar for Candida spp. After incubation, colony-forming units per milliliter values were calculated. Denture stomatitis remission was classified according to the Newton classification. Data were analyzed by Friedman (α=.05) and Wilcoxon tests and corrected by the Bonferroni test (α=.005). RESULTS: SH1 (mean rank [MR]=1.98) and SH2 (MR=1.64) showed lower biofilm coverage than C (MR=3.73) that was similar to RC (MR=2.92). SH1 (MR=2.43) and SH2 (MR=2.10) showed antimicrobial action for Candida spp, and RC (MR=3.36) showed similar results to C (MR=3.51) and baseline (MR=3.50). Clinical signs of denture stomatitis were reduced by SH1 (MR=2.44), while SH2 (MR=2.56) and RC (MR=2.74) showed intermediate results. CONCLUSIONS: The two sodium hypochlorite solutions were the most effective means of biofilm control. All tested solutions were effective in reducing the signs of denture stomatitis.

Evaluating the efficacy of denture cleansing materials in removal of tea and turmeric stains: An in vitro study.

CONTEXT: Extrinsic staining of acrylic resin dentures could be a major esthetic problem for denture wearers. Tea, coffee, cola, turmeric, and tobacco often cause extrinsic staining of dentures. AIM: To evaluate the efficacy of various denture cleansing materials in the removal of tea and turmeric stains and to compare the efficacy of those denture cleansers with each other in the removal of tea and turmeric stains. MATERIALS AND METHODS: Heat-cured acrylic resin specimens were stained using tea and turmeric solutions. The spectrophotometer was used to determine the reflectance values of the samples and to evaluate the efficacy of various denture cleansing materials in removal of tea and turmeric stains. Three denture cleansers, namely, sodium hypochlorite, Safe plus, and Clinsodent were used in the study. Water was used as a control. STATISTICAL ANALYSIS USED: ANOVA test and post hoc Tukey's test were used to determine the statistical difference between the groups. RESULT: A statistically significant difference was found (p ≤ 0.05) between the different denture cleansing materials used. Products containing sodium perborate along with trisodium phosphate had the highest stain removing capability. CONCLUSION: It was found that all the denture cleansing materials used in the study were effective in removing tea and turmeric stains. Products containing sodium perborate along with trisodium phosphate had a comparatively greater stain removal capability than products containing sodium perborate along with sodium bicarbonate followed by products containing sodium hypochlorite followed by water (control).

In vitro Effects of Lemongrass Extract on Candida albicans Biofilms, Human Cells Viability, and Denture Surface.

The purpose of this study was to investigate whether immersion of a denture surface in lemongrass extract (LGE) has effects on C. albicans biofilms, human cell viability and denture surface. Minimal inhibitory concentration (MIC) and minimal fungicidal concentration (MFC) were performed for LGE against C. albicans. For biofilm analysis, discs were fabricated using a denture acrylic resin with surface roughness standardization. C. albicans biofilms were developed on saliva-coated discs, and the effects of LGE at MIC, 5XMIC, and 10XMIC were investigated during biofilm formation and after biofilm maturation. Biofilms were investigated for cell counting, metabolic activity, and microscopic analysis. The cytotoxicity of different concentrations of LGE to peripheral blood mononuclear cells (PBMC) was analyzed using MTT. The effects of LGE on acrylic resin were verified by measuring changes in roughness, color and flexural strength after 28 days of immersion. Data were analyzed by ANOVA, followed by a Tukey test at a 5% significance level. The minimal concentration of LGE required to inhibit C. albicans growth was 0.625 mg/mL, while MFC was 2.5 mg/mL. The presence of LGE during biofilm development resulted in a reduction of cell counting (p < 0.05), which made the MIC sufficient to reduce approximately 90% of cells (p < 0.0001). The exposure of LGE after biofilm maturation also had a significant antifungal effect at all concentrations (p < 0.05). When compared to the control group, the exposure of PBMC to LGE at MIC resulted in similar viability (p > 0.05). There were no verified differences in color perception, roughness, or flexural strength after immersion in LGE at MIC compared to the control (p > 0.05). It could be concluded that immersion of the denture surface in LGE was effective in reducing C. albicans biofilms with no deleterious effects on acrylic properties at MIC. MIC was also an effective and safe concentration for use.

Influence of melaleuca and copaiba oils on Candida albicans adhesion.

OBJECTIVE: To evaluate the efficacy of Melaleuca alternifolia and Copaifera officinalis in inhibiting the adhesion of Candida albicans biofilm. BACKGROUND: Over 65% of denture wearers suffer from denture stomatitis, which is one of the most prevalent forms of oral candidiasis. This disease is characterised by the inflammation of the oral mucosa in contact with the contaminated denture. The contaminated denture contributes to the switch of C. albicans from yeast to its pathogenic hyphal form. Candida albicans adheres and colonises the polymethylmethacrylate resin surfaces and thus contributes to the development of denture stomatitis. MATERIALS AND METHODS: The minimal inhibitory concentration (MIC) of M. alternifolia and Co. officinalis was assessed by the agar dilution method. Sixty-six thermopolymerised acrylic resin squares were used and treated with phosphate-buffered saline, sodium hypochlorite 1%, melaleuca 0.75%, melaleuca 0.375%, melaleuca 0.188% and copaiba 10%. For adherence and biofilm formation, the treated squares were placed in six-well tissue culture plates containing 1 × 10(7)  cells/ml of ATCC1023 or SC5314 in Roswell Park Memorial Institute (RPMI) medium, and after 12 h, the planktonic cells were counted. RESULTS: Copaiba oil did not inhibit C. albicans growth. However, melaleuca oil showed an MIC value of 0.375% (3.4 mg/ml) for ATCC10231 and 0.093% (0.84 mg/ml) for SC5314. CONCLUSIONS: Our results demonstrated that M. alternifolia oil inhibited the growth of C. albicans. Moreover, both oils promoted significant adhesion reduction in the tested strains. These findings suggest the possibility of using these oils in prophylaxes against candidiasis.