Potential for direct application of blue light for photo-disinfection of dentine.

The direct application of light for photo-disinfection potentially provides a safe and novel modality to inhibit or eliminate cariogenic bacteria residing upon and within dentine. This study aimed to both; characterize the pattern of transmission of 405 nm light through molar dentine at different tooth locations, as well as, determine the irradiation parameters that are antibacterial for Streptococcus mutans under various growth conditions, including lawns, planktonic cultures, and biofilms. To determine the amount of light (405 nm) transmitted at different anatomical tooth locations; irradiance values were recorded after blue light (470-4054 mW/cm2) had traversed through occlusal, oblique, and buccal dentine sections; and three thicknesses - 1, 2 and 3 mm were investigated. To determine tubular density; scanning electron micrographs from 2 mm outer (dentine-enamel junction) and inner (pulp) dentine sections were analysed. For photo-disinfection studies; S. mutans was irradiated using the same 405 nm wavelength light at a range of doses (110-1254 J/cm2) in both biofilm and planktonic cultures. The inhibitory effect of the irradiation on bacterial lawns was compared by measuring zones of inhibition; and for planktonic cultures both spectrophotometric and colony forming unit (CFU) assays were performed. A live/dead staining assay was utilised to determine the effect of irradiation on bacterial viability in mature biofilms. Data indicated that increasing dentine thickness decreased light transmission significantly irrespective of its orientation. Occlusal and oblique samples exhibited higher transmission compared with buccal dentine. Oblique dentine 405 nm light transmission was comparable with that of occlusal dentine independent of section thickness. An increased tubule density directly positively correlated with light transmission. Irradiation at 405 nm inhibited S. mutans growth in both biofilm and planktonic cultures and a dose response relationship was observed. Irradiation at doses of 340 and 831 J/cm2 led to significant reductions in bacterial growth and viability; as determined by CFU counting and live/dead staining. Data suggests that phototherapy approaches utilising a 405 nm wavelength have therapeutic potential to limit cariogenic bacterial infections both at the surface and within dentine.

Caries Prevention Effects of Silver Diamine Fluoride with 10,600 nm Carbon Dioxide Laser Irradiation on Dentin.

Objective: To investigate the caries prevention effect of silver diamine fluoride (SDF) with a carbon dioxide (CO2) laser (λ = 10,600 nm) on dentin. Method: Human dentin slices (n = 10) were prepared and allocated to the following treatments: Group 1 (SDF)-slices received an SDF application. Group 2 (laser)-slices were irradiated with a CO2 laser. Group 3 (laser + SDF)-slices were irradiated with a CO2 laser, followed by an SDF application. Group 4 (negative control)-slices had no treatment. All of the slices were subjected to pH cycling for cariogenic challenge. Lesion depth, nanohardness, and chemical and morphological changes were assessed by microcomputed tomography (micro-CT), nanoindentation, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), respectively. Results: micro-CT determined lesion depths for groups 1-4 were 27 ± 6, 138 ± 32, 17 ± 5, and 182 ± 49 µm, respectively (p < 0.001; group 3 < group 1 < groups 2 and 4). The nanohardness values for groups 1-4 were 456 ± 109, 288 ± 5, 444 ± 142, and 258 ± 76 MPa, respectively (p = 0.003; groups 2 and 4 < groups 1 and 3). EDS determined that the calcium-to-phosphorus molar ratio for groups 1-4 were 1.26 ± 0.12, 1.07 ± 0.19, 1.37 ± 0.08, and 0.80 ± 0.17, respectively (p < 0.001; group 4 < group 2 < groups 1 and 3). SEM evidenced no ablation or cracking on the lased dentin surfaces. The treated dentin showed a relatively more intact and smoother surface morphology compared with the untreated dentin. Conclusions: SDF can reduce dentin demineralization against cariogenic challenge, and the caries preventive effect of SDF is further enhanced through CO2 laser irradiation.

Nd:YAP laser in the treatment of dentinal hypersensitivity: An ex vivo study.

PURPOSE: The aims of this ex vivo study were to evaluate the effectiveness of the Nd:YAP laser in the treatment of dentin hypersensitivity, to compare the temperature rise during laser irradiation at three different dentine thicknesses, and to analyse the composition of the dentine-lased surface. METHODS: A total of 33 teeth were used in this study. For scanning electron microscopy (SEM) observation, 24 teeth were transversely sectioned and divided into 4 groups: group A was irrigated with EDTA; group B was irradiated by Nd:YAP laser with 180 mJ energy/per pulse, 0.9 W average power, and 5 Hz frequency (power density [PD] = 229 W/cm2); group C was irradiated by Nd:YAP laser with 280 mJ energy/pulse, 1.4 W average power, and 5 Hz frequency (PD = 356 W/cm2); and group D was irradiated by Nd:YAP with 360 mJ energy/pulse, 1.8 W average power, and 5 Hz frequency (PD = 458 W/cm2). Energy-dispersive spectroscopy (EDS) analysis was performed on the same teeth evaluated for SEM observations. For temperature increase evaluation performed with thermocouples, 9 teeth were transversely sectioned at 3 different thicknesses (3 for each group) of 1, 2, and 3 mm. RESULTS: Statistical analysis showed significant changes in the diameter of the dentinal tubule orifices among all groups; EDS did not show modification of the Ca/P ratio. Temperature increase under irradiation exceeded 5.5 °C only in the group D samples. CONCLUSIONS: This ex vivo study, based on temperature recording, SEM observation, and EDS analysis, demonstrated that Nd:YAP laser at a PD of 356 W/cm2, corresponding to an average power of 1.4 W, defines the best treatment for dentine hypersensitivity in terms of compromise between efficacy of the treatment and safety of the pulp.

Influence of Er,Cr:YSGG Laser Dentin Conditioning on the Bond Strength of Bioactive and Conventional Bulk-Fill Dental Restorative Material.

Objective: The aim of the study was to evaluate shear bond strength (SBS) and modes of failure for bioactive (BA) material when bonded to Er,Cr:YSGG lased dentin in comparison with other conditioning regimes. Materials and methods: One hundred twenty extracted teeth were mounted and allocated into eight groups (n = 15) according to the surface conditioning [group 1: Er,Cr:YSGG laser + BA; group 2: Er,Cr:YSGG laser + multi-core (MC); group 3: Er,Cr:YSGG + Ketac Conditioner (polyacrylic acid) + BA; group 4: Er,Cr:YSGG + Ketac Conditioner + MC; group 5: conventional etch and rinse + BA (Control); group 6: conventional etch and rinse + MC (Control); group 7: self-etch + BA; group 8: self-etch + MC]. Based on the type of bulk-fill material, samples from groups 1, 3, 5, and 7 were bonded to BA and groups 2, 4, 6, and 8 were bonded to conventional MC bulk-fill material. All specimens were tested for SBS using universal testing machine. Ten samples from each group were assessed for modes of failure. Data were assessed using analysis of variance and Tukey multiple comparisons test. Results: The maximum SBS value was in group 6 (18.96 ± 0.315) with etch and rinse dentin conditioning and bonded to MC. The minimum SBS value was exhibited by group 7 (16.04 ± 0.854) self-etch conditioning bonded to BA. SBS among group 6 specimens were significantly higher than that of specimens in group 7 (p < 0.05). Among all groups the most common type of observed failure was adhesive. Conclusions: Dentin surface treatment with Er,Cr:YSGG phototherapy for the adhesive bonding of BA and conventional bulk-fill resin composite MC showed comparable bond strength outcomes to conventional conditioning techniques. Er,Cr:YSGG laser dentin conditioning of dentin for bonding of bulk-fill BA materials has potential to be used clinically as it shows potential for adequate adhesive bond integrity.

Effects of Erbium:Yttrium-Aluminum-Garnet Laser Irradiation on Bovine Dentin Contaminated by Cariogenic Bacteria.

Objective: This study was performed to determine the bactericidal effects of erbium:yttrium-aluminum-garnet (Er:YAG) laser irradiation and the morphological and chemical composition changes in bovine dentin. Methods: Dentin slabs were prepared from bovine incisors, and then cultured with Streptococcus mutans to produce bacteria-infected dentin samples. The samples were randomly divided into five groups with Er:YAG laser irradiation energy densities of 0, 6.37, 12.73, 19.11, and 25.47 J/cm2. After irradiation, samples were stained and observed by confocal laser scanning microscopy. The bactericidal abilities were measured using live/dead staining. The morphology and chemical components were investigated by scanning electron microscopy and energy-dispersive spectrometry. Results: After irradiation, the elimination of bacteria and the smear layer were significantly better in the high energy density groups (19.11, 25.47 J/cm2) than in the low energy density groups (6.37, 12.73 J/cm2; p < 0.001). On morphological examination, the group with minimum energy density (6.37 J/cm2) showed superficial melting. In the high energy density groups (12.73, 19.11, and 25.47 J/cm2), laser-irradiated dentin showed a clean surface with open orifices. Significant increases were observed in the weight percentages of calcium (from 19.75 ± 0.69 to 34.47 ± 2.91, p < 0.001) and phosphate (from 8.58 ± 0.43 to 15.10 ± 1.81, p < 0.001), whereas significant decreases were observed for oxygen (from 49.84 ± 0.69 to 36.39 ± 2.86, p < 0.001) and carbon (from 26.06 ± 3.58 to 12.80 ± 2.26, p < 0.01) with increasing energy density. Conclusions: This study confirmed that Er:YAG laser irradiation has bactericidal and dentin conditioning effects.

Influence of grape seed extract in adhesion on dentin surfaces conditioned with Er,Cr:YSGG laser.

The proanthocyanidin (PA)-rich grape seed extract (GSE) is a collagen cross-linking agent that can perform a chemical bond with the dentin's collagen. The objective of this study was to evaluate the influence on shear bond strength (SBS) of the pre-conditioning of GSE, on human dentin surfaces conditioned with Er,Cr:YSGG laser. The sample consisted of 64 non-carious human teeth, divided into eight groups, four groups conditioned with Er,Cr:YSGG laser (4.5 W, 50 Hz, 50 µs, 70% air, 90% water) and four prepared with conventional methods (control). In both groups, a GSE solution was applied before using the two adhesives tested: Clearfil™ SE Bond (CSE) and Scotchbond™ Universal (SU). Subsequently, a SBS test, a scanning electron microscopy, and a statistical analysis were performed. In the laser groups, the best SBS mean (20.08 ± 4.01 MPa) was achieved in the group treated with GSE and CSE. The control group with the application of CSE showed the highest SBS mean (24.27 ± 10.28 MPa), and the group treated with laser and SU showed the lowest SBS mean (12.94 ± 6.51 MPa). Between these two groups there was a statistically significant difference (p = 0.05). However, this was not observed among the laser or control groups. The type of dentin surface preparation can influence the SBS. The CSE showed better SBS in laser and control groups. The presence of GSE did not improve the adhesion on surfaces conditioned with laser, but more studies should be carried out in the future to confirm this conclusion.

How to improve root canal filling in teeth subjected to radiation therapy for cancer.

The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

Evaluation of chemical and morphological changes in radicular dentin after different final surface treatments.

The aim of this study was to evaluate the chemical and morphological effects of different lasers as a final surface treatment for endodontic therapy through energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Twenty-five maxillary canines were selected and instrumented with K3 system. Roots were randomly distributed into five groups (n = 5) according to the surface treatment: GI (distilled water), GII (NaOCl + EDTA), GIII (NaOCl + EDTA + 980 nm diode laser), GIV (NaOCl + EDTA+ 1,064 nm Nd:YAG laser), and GV (NaOCl + EDTA+ 2,780 nm Er, Cr:YSGG laser). Lasers were applied for 20 s and samples were bisected, exposing the treated surface and then subjected to elements quantification by EDS and morphological evaluation by scanning electron microscope (SEM). EDS data were submitted to ANOVA-two way, and SEM scores were submitted to two-way Kruskal-Wallis and Dunn's tests. The EDS analysis showed no difference for the chemical elements and Ca/P ratio between groups (p > .05). Statistical analysis showed more intense results for GV and less intense results for GI (p < .05). The GIII showed an amorphous organic matrix surface, while GV provided greater removal of intertubular dentin forming craters, and GIV promoted dentin fusion. The EDS method used in this study was not able to verify any chemical changes in root canal dentin; Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser were capable of modifying the dentin morphology, correlating characteristics features for each one, which are essential clinical knowledge to establish the correct indication for each case. RESEARCH HIGHLIGHTS: EDS was not able to verify any chemical changes in root canal dentin after 980 nm diode, Nd:YAG and Er;Cr:YSGG laser treatments Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser modified dentin morphology, correlating characteristics features for each one.

Effect of photodynamic therapy on the mechanical properties and bond strength of glass-fiber posts to endodontically treated intraradicular dentin.

STATEMENT OF PROBLEM: The use of photosensitizers in photodynamic therapy promotes intraradicular microbial reduction during nonsurgical endodontic therapy. However, studies are lacking on the consequences of the application of these agents on the mechanical properties of intraradicular dentin and on the bond strength of glass-fiber posts. PURPOSE: The purpose of this in vitro study was to evaluate the influence of photodynamic therapy on the bond strength of glass-fiber posts using a push-out test and, additionally, to measure the Martens hardness (MH) and elastic indentation modulus (Eit) of intraradicular dentin when different photosensitizers are used. MATERIAL AND METHODS: Eighty bovine teeth were used to simulate experimental endodontic treatments. Biomechanical instrumentation was performed for all root canals, and the teeth were distributed into 5 groups: control-deionized water; methylene blue 50 mg/L + red laser; methylene blue 100 mg/L + red laser; curcumin 500 mg/L + blue LED; and curcumin 1000 mg/L + blue LED. The MH and Eit of intraradicular dentin were measured using an ultramicrohardness tester under a load of 3 mN (n=8). The push-out bond strength of glass-fiber posts to dentin was measured using a universal testing machine (n=8). Mechanical properties and bond strength data were subjected to the Kruskal-Wallis test, ANOVA, and Fisher least significant difference test (α=.05). Images of representative specimens were obtained using a scanning electron microscope. RESULTS: The MH, Eit, and bond strength of intraradicular dentin were influenced by the photosensitizer used. In general, curcumin promoted lower mechanical properties values but higher bond strength values. CONCLUSIONS: Photosensitizers influenced the mechanical properties of intraradicular dentin and the bond strength of glass-fiber posts, and methylene blue at 50 mg/L had no marked effect on the mechanical properties of the dentin or the bond strength values.

Effect of 2.94 µm Er: YAG laser on the chemical composition of hard tissues.

The aim was to investigate the effect of the Er-YAG laser radiation on morphology and chemical composition of enamel, dentin, and bone. The specimens of the three groups were irradiated with a very long pulse mode (VLP) of 2.94 µm Er-YAG laser with 100 mJ pulse energy and energy density of 8.42 J/ c m 2 for 30 s, at a repetition rate of 15 Hz. The organic and inorganic content of the samples were investigated by Fourier Transforms Infrared spectroscopy (FTIR). The morphological characteristics were investigated with scanning electron microscopy (SEM) and elemental analysis (calcium and phosphorus) with energy-dispersive X-ray spectroscopy (EDX). FTIR data were analyzed with a One-Way ANCOVA test and EDX data with the independent sample t-test. Following the laser radiation, FTIR showed a significant decrease in the organic content of all tissues. The weight percentage (wt %) calcium content of dentin and bone increased significantly following irradiation with a p-value of .002 for both tissues, but the wt % of phosphorus content was not influenced significantly. The morphological alterations expressed signs of fusion in all the samples.

Bactericidal Effect of Various Laser Irradiation Systems on Enterococcus faecalis Biofilms in Dentinal Tubules: A Confocal Laser Scanning Microscopy Study.

OBJECTIVE: The aim of this study was to compare the bactericidal effect of various laser irradiation systems on Enterococcus faecalis biofilms in dentinal tubules by using a novel dentin infection model and confocal laser scanning microscopy (CLSM). BACKGROUND DATA: Laser-activated irrigations have been proposed as an adjuvant to conventional protocols of root canal treatment to enhance the smear layer removal, which is a promising protocol for root canal disinfection. MATERIALS AND METHODS: E. faecalis were centrifuged into the dentinal tubules, cultured for 3 weeks, and then received 1- and 3-min treatments as follows: (A) 5.25% sodium hypochlorite (NaOCl) irrigation, (B) Nd:YAG laser irradiation, (C) diode laser irradiation, (D) Nd:YAP laser irradiation, (E) Er,Cr:YSGG laser-activated NaOCl irrigation, and (F) Er:YAG laser-activated NaOCl irrigation. Bacterial reductions were assessed by CLSM using a LIVE/DEAD® bacterial viability stain method. RESULTS: For each group, the bacterial reduction increased as the treatment time increased (p < 0.05). The Er,Cr:YSGG and Er:YAG laser significantly enhanced the bactericidal effect of NaOCl (p < 0.05). Under the conditions of the same treatment time, bacterial reductions were presented in the descending order of Er:YAG + NaOCl, Er,Cr:YSGG + NaOCl > Nd:YAP > Nd:YAG, diode > NaOCl. CONCLUSIONS: Under the conditions of present study, treatments of Er:YAG + NaOCl and Er,Cr:YSGG + NaOCl presented the strongest bactericidal effect among the tested protocols and are potential protocols for root canal disinfection.

[Root canals dentinal wall structure after photodynamic exposure]. / Izuchenie struktury stenki kornevykh kanalov zubov posle fotodinamicheskogo vozdeistviia.

The aim of the study was to assess root canal dentinal walls structure after photodynamic exposure with the use of 0.5% photoditazine. A root canal dentin of 46 single root intact teeth removed for orthodontic indications was examined by scanning electron microscope JEOL JSM-6510 (Japan). Microphotographs of the root canal wall were obtained in the orifice, central and apical parts under×2000 magnification. It was found that photoactivation of 0.5% gel photoditazine by a light source, laser or diode, with a wavelength of 635-660 nm and a power of 150-200 mW is an effective technique for removing the smear layer of the root canal wall, which facilitates the maximum opening of the dentinal tubules to a depth of 2-3 µm. The best result (the maximum number of open dentinal tubules, the absence of a smear layer) is observed with 3 min photoditazine exposure and 2 min of laser exposure. The method can be proposed as an alternative supplement to the conventional root canals irrigation.

How to improve root canal filling in teeth subjected to radiation therapy for cancer

Abstract The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

Effect of low-level laser therapy (λ780 nm) on the mechanically damaged dentin-pulp complex in a model of extrusive luxation in rat incisors.

In order to regenerate the dental pulp, many strategies have been developed as phototherapy. In the pulp repair, we do not know if gallium-aluminum-arsenide (GaAlAs) laser preserves the primary odontoblasts or stimulates the formation of more dentin matrix when dental pulp is damaged. The aim of the present study was to examine the effect of laser phototherapy (λ780 nm) on vascularization, inflammation, density of the primary odontoblast layer, and formation of reactionary and reparative dentin in the dental pulp by provoking extrusion of the rat incisor. The upper incisors were extruded 3 mm and then repositioned into their original sockets followed by a laser irradiation of the palatal mucosa (λ = 780 nm; p = 70 mW; CW; 4.2 J/cm2; 60 s) every 48 h. Non-traumatized and/or non-irradiated incisors were used as the controls. At 8 and 30 days after surgery, incisors were processed for histological and histomorphometric analysis. Morphological analysis revealed no differences in vascularization between groups, but showed discrete inflammation in some non-irradiated and injured specimens, which correlated with a more irregular reparative dentin. The density of primary odontoblasts in the groups treated with lasers was higher when compared to non-irradiated groups, but no statistically significant difference between groups (p > 0.05). The thickness of the tertiary dentin was increased in both traumatized groups with no statistically significant difference between non-irradiated and irradiated groups (p > 0.05).The present findings revealed that the GaAlAs laser induced small changes on dentin-pulp complex, with more regular dentin matrix in the irradiated dental pulps.

Evaluation of different treatment protocols for dentin hypersensitivity: an 18-month randomized clinical trial.

This randomized and longitudinal in vivo study aimed to assess different protocols for the treatment of dentin hypersensitivity with low-power laser (with different doses), high-power laser, and a desensitizing agent, for a period of 12 and 18 months. The lesions from 32 patients (117 lesions), who were submitted to the inclusion and exclusion criteria, were divided into nine groups (n = 13): G1: Gluma Desensitizer (Heraeus Kulzer), G2: low-power laser with low dose (three points of irradiation in vestibular portion and an apical point 30 mW, 10 J/cm2, 9 s per point with the wavelength of 810 nm, with three sessions with an interval of 72 h), G3: low-power laser with high dose (one point in the cervical area, and one apical point 100 mW, 40 J/cm2, 11 s per point with the wavelength of 810 nm in three sessions with an interval of 72 h), G4: low-power laser with low dose + Gluma Desensitizer, G5: low-power laser with high dose + Gluma Desensitizer, G6: Nd:YAG laser (Power Laser™ ST6, Research® in contact 1.0 W, 10 Hz and 100 mJ, ≈85 J/cm2, with the wavelength of 1064 nm), G7: Nd:YAG laser + Gluma Desensitizer, G8: low-power laser with low dose + Nd:YAG laser, and G9: low-power laser with high dose + Nd:YAG laser. The level of sensitivity of each volunteer was assessed by visual analog scale of pain (VAS) with the aid of air from the triple syringe and exploration probe, 12 and 18 months after treatment. All analyses were performed separately for air and probe stimulus. The level of significance was considered for values of p < 0.05. After statistical analysis, all treatments were shown to be effective in reducing dentinal hypersensitivity, and the results were considered not statistically different from those at 12 months. Therefore, until the 18-month evaluation, it could be said that no statistical differences were observed in the sensitivity levels for all treatments.

Influence of root dentin treatment on the push-out bond strength of fibre-reinforced posts

This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.

The association between Nd:YAG laser and desensitizing dentifrices for the treatment of dentin hypersensitivity.

This study aims to evaluate the association between Nd:YAG laser (with and without a photoabsorber) and two desensitizing dentifrices containing 15% NovaMin or 8% arginine, as potential treatments for dentin hypersensitivity (DH). DH was simulated by EDTA application for 2 min. Specimens were then analyzed with an environmental scanning electron microscope (ESEM) to ensure open dentin tubules (ODT), counted by using ImageJ software. Specimens were randomized into eight groups (n = 10): Laser (L), Laser+Photoabsorber (LP), Arginine (A), Arginine+Laser (AL), Arginine+Laser+Photoabsorber (ALP), NovaMin (N), NovaMin+Laser (NL), and NovaMin+Laser+Photoabsorber (NLP). Laser irradiation was performed with 1 W, 100 mJ, 10 Hz, ≅85 J/cm2; 4 irradiations of 10 s each, with 10 s intervals between them. After treatment, specimens were again analyzed by ESEM and submitted to erosive/abrasive cycling for 5 days. A final ESEM analysis was performed. Data were analyzed with two-way repeated measure ANOVA and Tukey tests (α = 0.05). After treatment, groups N, NL, and NLP presented the lower number of ODT, but they did not different from LP, ALP, and AL. Group A presented the highest number of ODT and it did not differ from group L. Groups L, AL, ALP, and LP presented intermediate results, without differing from each other. After cycling, group A presented the highest number of ODT and did not differ significantly from the other groups, except NLP. None of the associations tested presented better tubule occlusion than NovaMin by itself. Arginine was the only treatment that presented improved tubule occlusion when associated with Nd:YAG laser.

Transdentinal photobiostimulation of stem cells from human exfoliated primary teeth.

AIM: To evaluate the effects of infrared light-emitting diode (LED) irradiation on stem cells from human exfoliated deciduous teeth (SHEDs). METHODOLOGY: Exfoliated primary teeth were obtained (n = 3), and SHEDs obtained from the teeth were seeded on the pulpal surface of 0.2-mm-thick dentine discs produced from permanent molars. The cells were incubated for 24 h by placing the discs in plain Dulbecco's modified Eagle's medium (DMEM). The DMEM was then replaced with new culture medium formulated for odontoblast differentiation. After 12 h in the second medium, SHEDs were irradiated through the dentine discs using an infrared LED (850 nm) with a power density of 80 mW cm-2 . Energy doses (EDs) delivered to the occlusal surface of the dentine discs were 0 (control), 2 and 4 J cm-2 (n = 6). Subsequent tests were performed 72 h after irradiation. These tests included cell viability (MTT), alkaline phosphatase activity (ALP), total protein production (TP), scanning electron microscopy (SEM), as well as gene expression for ALP, Col I, DSPP and DMP-1. Data were analysed using Kruskal-Wallis and Mann-Whitney t-tests (α = 0.05). RESULTS: Both EDs (2 and 4 J cm-2 ) significantly increased cell viability and ALP activity. For TP, ALP and Col I gene expression, only the 4 J cm-2 group had significantly higher values compared to the control group. Cell morphology was not affected by irradiation. CONCLUSION: Infrared LED irradiation was capable of biostimulating SHEDs through a 0.2 mm thickness of dentine, especially at the 4 J cm-2 level.

Effect of Water-Cooled Nd:YAG Laser on Dentinal Tubule Occlusion In Vitro.

OBJECTIVE: The objective of this study was to investigate the effect of a new water-cooled Nd:YAG laser on dentinal tubule occlusion. BACKGROUND DATA: The effect of water-cooled Nd:YAG laser on dentinal tubule occlusion has not been reported. METHODS: Acid-etched dentin samples were randomly divided into three groups: (1) dentin control, (2) dentin treated by Nd:YAG laser, (3) dentin treated by water-cooled Nd:YAG laser. After laser irradiation, half of the samples were immersed in a 6 wt% citric acid (pH 1.5) solution for 1 min to evaluate the acid resistance. The morphologies of dentin surfaces were characterized by scanning electron microscopy. The number and diameters of the open dentinal tubules were analyzed by one-way and two-way analyses of variance. RESULTS: Both the Nd:YAG laser and water-cooled Nd:YAG laser melted the superficial layer of dentin, which caused dentinal tubule occlusion in most areas and diameter reduction of the rest open tubules. Microcracks on the dentin surface were only observed in the Nd:YAG laser group. The tubule occlusion induced by the two lasers showed a good acid resistance. CONCLUSIONS: The effect of water-cooled Nd:YAG laser on dentinal tubule occlusion is similar to that of the Nd:YAG laser. The dentinal tubule occlusion induced by the two lasers could resist acid challenge to some extent.

Influence of root dentin treatment on the push-out bond strength of fibre-reinforced posts

Abstract This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.