Dentine decalcification and smear layer removal by different ethylenediaminetetraacetic acid and 1-hydroxyethane-1,1-diphosphonic acid species.

AIM: To compare solutions of di- and tetrasodium ethylenediaminetetraacetic acid (EDTA) and 1-hydroxyethane-1,1-diphosphonic acid (HEDP) regarding their ability to solubilize calcium from dentine and remove smear layer. METHODOLOGY: Solutions with a molarity corresponding to that of 17% Na2 EDTA (pH adjusted to 8.5) were prepared by dissolving Na2 and Na4 salts of HEDP (etidronate), or Na4 EDTA in deionized water. Standardized root dentine discs covered by a smear layer were prepared from human third molars. These discs (n = 10 per group) were immersed in test solutions or phosphate-buffered saline for 1 min. The dissolved Ca2+ was determined by atomic absorption spectroscopy, apparently opened dentinal tubules by laser scanning microscopy and automated image analysis. Ca2+ values were compared between groups by parametric, tubular areas by nonparametric methods, α = 0.05. RESULTS: Solutions prepared from the tetrasodium salts were alkaline (pH 11.3-11.4), whilst counterparts made from the disodium salts were acidic. The EDTA solutions dissolved more calcium than the HEDP counterparts (P < 0.05); solutions prepared with the disodium salts dissolved more calcium than those made from the tetrasodium salts (P < 0.05). There was a high correlation between dissolved calcium and the apparently opened tubular areas (Spearman's ρ = 0.81). Differences between groups regarding opened tubules were similar to those observed regarding the Ca2+ values, with a slightly reduced discerning power due to high variance. CONCLUSION: Calcium chelation and thus smear layer removal by EDTA and HEDP are influenced by pH.

Improved reactive nanoparticles to treat dentin hypersensitivity.

The aim of this study was to evaluate the effectiveness of different nanoparticles-based solutions for dentin permeability reduction and to determine the viscoelastic performance of cervical dentin after their application. Four experimental nanoparticle solutions based on zinc, calcium or doxycycline-loaded polymeric nanoparticles (NPs) were applied on citric acid etched dentin, to facilitate the occlusion and the reduction of the fluid flow at the dentinal tubules. After 24 h and 7 d of storage, cervical dentin was evaluated for fluid filtration. Field emission scanning electron microscopy, energy dispersive analysis, AFM and Nano-DMA analysis were also performed. Complex, storage, loss modulus and tan delta (δ) were assessed. Doxycycline-loaded NPs impaired tubule occlusion and fluid flow reduction trough dentin. Tubules were 100% occluded in dentin treated with calcium-loaded NPs or zinc-loaded NPs, analyzed at 7 d. Dentin treated with both zinc-NPs and calcium-NPs attained the highest reduction of dentinal fluid flow. Moreover, when treating dentin with zinc-NPs, complex modulus values attained at intertubular and peritubular dentin were higher than those obtained after applying calcium-NPs. Zinc-NPs are then supposed to fasten active dentin remodeling, with increased maturity and high mechanical properties. Zinc-based nanoparticles are then proposed for effective dentin remineralization and tubular occlusion. Further research to finally prove for clinical benefits in patients with dentin hypersensitivity using Zn-doped nanoparticles is encouraged. STATEMENT OF SIGNIFICANCE: Erosion from acids provokes dentin hypersensitivity (DH) which presents with intense pain of short duration. Open dentinal tubules and demineralization favor DH. Nanogels based on Ca-nanoparticles and Zn-nanoparticles produced an efficient reduction of fluid flow. Dentinal tubules were filled by precipitation of induced calcium-phosphate deposits. When treating dentin with Zn-nanoparticles, complex modulus values attained at intertubular and peritubular dentin were higher than those obtained after applying Ca-nanoparticles. Zn-nanoparticles are then supposed to fasten active dentin remodeling, with increased maturity and high mechanical properties. Zinc-based nanogels are, therefore, proposed for effective dentin remineralization and tubular occlusion. Further research to finally prove for clinical benefits in patients with dentin hypersensitivity using Zn-doped nanogels is encouraged.

Effects of different treatments on chemical and morphological features of eroded dentin.

To evaluate the treatment of eroded dentin (Sensodyne Repair & Protect™, Er:YAG laser and combinations). The occlusal surfaces of 25 third molars were sectioned 1.5 mm in thickness. After an erosion cycle (5 min in demineralizing solution + 3 h in remineralizing solution; six cycles a day for 8 days), the samples were divided into five groups (n = 5): (E) erosion - control; (ES) erosion + Sensodyne Repair & Protect (NovaMin); (EL) erosion + Er:YAG laser (40 mJ, 10 Hz, 0.4 W, 50 µs, 3.1 J/cm2, 63 W/cm2); (ELS) erosion + Er:YAG laser + Sensodyne; and (ESL) erosion + Sensodyne + Er:YAG laser. Following storage in ultrapure water (37 °C/14 days), the Ca/P ratio was evaluated by EDXRF and the morphology surfaces examined in SEM. The percentage of exposed dentin tubules was calculated. One-way analysis of variance and Tukey's test at 5% were used to treat the data. The Ca/P ratio was higher in E and ES groups. More exposed dentin tubules were found in E group and less exposed tubules were found in the ES group (p < 0.0001). When the toothpaste and laser were combined, the number of occluded dentin tubules was higher when laser was performed first (ELS). A positive effect was found when the laser and toothpaste were combined.

Effect of low-level laser therapy (λ780 nm) on the mechanically damaged dentin-pulp complex in a model of extrusive luxation in rat incisors.

In order to regenerate the dental pulp, many strategies have been developed as phototherapy. In the pulp repair, we do not know if gallium-aluminum-arsenide (GaAlAs) laser preserves the primary odontoblasts or stimulates the formation of more dentin matrix when dental pulp is damaged. The aim of the present study was to examine the effect of laser phototherapy (λ780 nm) on vascularization, inflammation, density of the primary odontoblast layer, and formation of reactionary and reparative dentin in the dental pulp by provoking extrusion of the rat incisor. The upper incisors were extruded 3 mm and then repositioned into their original sockets followed by a laser irradiation of the palatal mucosa (λ = 780 nm; p = 70 mW; CW; 4.2 J/cm2; 60 s) every 48 h. Non-traumatized and/or non-irradiated incisors were used as the controls. At 8 and 30 days after surgery, incisors were processed for histological and histomorphometric analysis. Morphological analysis revealed no differences in vascularization between groups, but showed discrete inflammation in some non-irradiated and injured specimens, which correlated with a more irregular reparative dentin. The density of primary odontoblasts in the groups treated with lasers was higher when compared to non-irradiated groups, but no statistically significant difference between groups (p > 0.05). The thickness of the tertiary dentin was increased in both traumatized groups with no statistically significant difference between non-irradiated and irradiated groups (p > 0.05).The present findings revealed that the GaAlAs laser induced small changes on dentin-pulp complex, with more regular dentin matrix in the irradiated dental pulps.

Outcome of Revascularization Procedure: A Retrospective Case Series.

INTRODUCTION: The purpose of this retrospective case series was to investigate the outcome of the revascularization procedure in necrotic immature teeth. METHODS: The residents and faculty members at the University of Pennsylvania endodontic department were invited to submit consecutive revascularization cases treated by them, irrespective of the outcome, during the time period of 2009 to 2012. Twenty-eight of 35 submitted necrotic immature teeth met the inclusion criteria. The treatment protocol included minimal instrumentation and irrigation with 3% sodium hypochlorite and 17% EDTA. Triple antibiotic paste was placed for a minimum of 21 days. After blood clot induction, either EndoSequence Bioceramic Putty (Brasseler, Savannah, GA) or mineral trioxide aggregate was placed below the cementoenamel junction, and composite was used as a final restoration. The follow-up period ranged from 7 to 72 months. The outcome was assessed as complete healing (the absence of clinical signs and symptoms, complete resolution of periradicular radiolucency, increase in the root dentin thickness/length, and apical closure), incomplete healing (the absence of clinical signs and symptoms, the periapical lesion completely healed without any signs of root maturation or thickening, the periapical lesion either reduced in size or unchanged with/without radiographic signs of increasing root dentin thickness/length, or apical closure), and failure (persistent clinical signs and symptoms and/or increased size of the periradicular lesion). RESULTS: Twenty-one of 28 cases (75%) healed completely, 3 cases (10.7%) failed during the observation period and needed further treatment, and 4 cases (14%) presented with incomplete healing. CONCLUSIONS: Within the limitation of this study, the outcome of revascularization, wherein healing of periapical periodontitis and maturation of roots occurs, is fairly high, making it a viable treatment option in comparison with apexification.

Clinical, mineral and ultrastructural changes in carious dentin of primary molars after restoration.

INTRODUCTION: Partial caries removal has been shown to be an effective method to treat deep carious lesions in deciduous teeth. Nevertheless, the possibility of keeping infected dentin in the cavity still requires additional investigation. The objective of this research was to describe changes in primary infected dentin after restoration with glass ionomer cement. METHODS: Dentin from 45 primary molars with deep and active carious lesions was evaluated using clinical and laboratory criteria, before and 60 days after restoration. The clinical analysis evaluated dentin colour (CO), dentin consistency (COS) and laser fluorescence (LF). The laboratory procedures assessed bacterial contamination and mineral content (MC), and evaluated the dentin ultrastructure and collagen content. Data on CO, COS, LF and colony forming units were analysed using the Wilcoxon signed-rank test; MC, bacterial counts and collagen evaluations were evaluated using the Student's t-test. RESULTS: After 60 days, lower values of LF were observed, together with a lower bacterial count, and a higher COS was found, with an increase in calcium, phosphorus and collagen contents. Differences were not detected for CO or for fluorine content. Baseline samples showed enlarged tubules with bacterial invasion; 60-day samples showed better organised tissue, with a more compact intertubular dentin and narrower tubules. CONCLUSION: It is concluded that appropriate cavity sealing can promote beneficial changes in deep carious lesions of primary teeth, even in the presence of infected dentin.

Does Smear Layer Removal Influence Root Canal Therapy Outcome? A Systematic Review.

OBJECTIVE: The aim of this systematic review was to determine whether the smear layer (SL) removal procedure influences the outcome of root canal treatment. STUDY DESIGN: We performed a search on Pubmed, Scopus, ISI Web of Science, Cochrane Library, Lilacs and SIGLE. We included randomized controlled clinical trials (RCT), with clinical and radiographic outcomes, conducted on subjects who had undergone root canal therapy. The protocol differed only in the SL removal or maintenance procedure. We evaluated the papers for risk of bias according to the Cochrane assessment tool. RESULTS: A total of 1,983 articles were found, after removal of duplicates, 892 remained. We included two studies in this review. One study revealed a low risk of bias and a high success rate for the SL removal group compared to the non SL removal group (P = 0.04), while the other study had a high risk of bias and found no difference between the SL removal and non SL removal groups (P = 1.00). CONCLUSION: We concluded that the SL removal for root canal treatment of primary teeth with initial clinical signs and symptoms or pulpal necrotic status, could benefit the outcome, although further RCT should be performed to achieve evidence.

Antibacterial Properties Associated with Chitosan Nanoparticle Treatment on Root Dentin and 2 Types of Endodontic Sealers.

INTRODUCTION: The aim of this study was to evaluate the efficacy of carboxymethyl chitosan (CMCS) and chitosan nanoparticles (CNps) to inactivate bacteria and prevent biofilm formation at sealer-dentin interfaces. METHODS: The study was divided into 3 stages: first stage, the experiment was conducted to analyze the antibacterial properties of CMCS in different formulations against biofilms; second stage, direct-contact and membrane-restricted methods were used to evaluate the antibacterial properties of an epoxy resin (ThermaSeal Plus; Dentsply Tulsa Dental, Tulsa, OK) and calcium silicate (MTA Fillapex; Angelus SA, Londrina, PR, Brazil) based-sealers with or without CNps; and third stage, biofilm formation at the sealer dentin interfaces of root dentin treated with CMCS and filled with gutta-percha and CNp incorporated sealer were analyzed after 1- and 4-week aging periods. The samples were treated and filled as follows: (1) distilled water: unaltered sealer (control group), (2) CMCS: sealer+CNps (CMCS group), and (3) CMCS/rose bengal: sealer+CNps (CMCS/RB group). Enterococcus faecalis was used to infect all the samples. Microbiological and microscopic analyses were used to assess the antibacterial characteristics. RESULTS: CMCS-based treatments effectively killed bacteria adherent on root dentin (P < .05). The addition of CNps to ThermaSeal enhanced its antibacterial ability by direct-contact and membrane-restricted tests (P < .05). The CNp incorporation significantly increased the antibacterial efficacy of root canal sealers even after a 4-week aging time (P < .05). CONCLUSIONS: This study highlighted the ability of CMCS to disinfect root canal dentin and inhibit bacterial adhesion. CNps in root canal sealers are capable of maintaining their antibacterial activity even after prolonged aging.

Histological Evaluation of Allium sativum Oil as a New Medicament for Pulp Treatment of Permanent Teeth.

OBJECTIVE: The objective of this study was to evaluate the histo pathology effects of two medicaments Allium sativum oil and formocresol on the remaining pulp tissue of the permanent teething children. MATERIALS AND METHODS: A total of 18 premolars were included in this study. Two sound premolars were extracted and subjected to histological examination to show the normal pulp tissue. Pulpo tomy procedure was performed in the rest of the remaining 16 premolars; half of them using Allium sativum oil and the rest of the tested premolars were medicated using formocresol and all were sealed with suitable restoration. Then, premolars extracted at variable intervals (48 hours, 2 weeks, 1 month, 2 months), stained using hemotoxylin and eosin etain (H&E) and prepared for histopathology examination. RESULTS: Histological evaluation seemed far more promising for Allium sativum oil than formocresol. Histological evaluation revealed that teeth treated with Allium sativa oil showed infammatory changes that had been resolved in the end of the study. On the contrary, the severe chronic infammation of pulp tissue accompanied with formocresol eventually produced pulp necrosis with or without fibrosis. In addition, pulp calcification was evidenced in certain cases. CONCLUSION: Allium sativum oil is a biocompatible material that is compatible with vital human pulp tissue. It offers a good healing potential, leaving the remaining pulp tissue healthy and functioning.

Antimicrobial Effects of Novel Triple Antibiotic Paste-Mimic Scaffolds on Actinomyces naeslundii Biofilm.

INTRODUCTION: Actinomyces naeslundii has been recovered from traumatized permanent teeth diagnosed with necrotic pulps. In this work, a triple antibiotic paste (TAP)-mimic scaffold is proposed as a drug-delivery strategy to eliminate A. naeslundii dentin biofilm. METHODS: Metronidazole, ciprofloxacin, and minocycline were added to a polydioxanone (PDS) polymer solution and spun into fibrous scaffolds. Fiber morphology, mechanical properties, and drug release were investigated by using scanning electron microscopy, microtensile testing, and high-performance liquid chromatography, respectively. Human dentin specimens (4 × 4 × 1 mm(3), n = 4/group) were inoculated with A. naeslundii (ATCC 43146) for 7 days for biofilm formation. The infected dentin specimens were exposed to TAP-mimic scaffolds, TAP solution (positive control), and pure PDS (drug-free scaffold). Dentin infected (7-day biofilm) specimens were used for comparison (negative control). Confocal laser scanning microscopy was done to determine bacterial viability. RESULTS: Scaffolds displayed a submicron mean fiber diameter (PDS = 689 ± 312 nm and TAP-mimic = 718 ± 125 nm). Overall, TAP-mimic scaffolds showed significantly (P ≤ .040) lower mechanical properties than PDS. Within the first 24 hours, a burst release for all drugs was seen. A sustained maintenance of metronidazole and ciprofloxacin was observed over 4 weeks, but not for minocycline. Confocal laser scanning microscopy demonstrated complete elimination of all viable bacteria exposed to the TAP solution. Meanwhile, TAP-mimic scaffolds led to a significant (P < .05) reduction in the percentage of viable bacteria compared with the negative control and PDS. CONCLUSIONS: Our findings suggest that TAP-mimic scaffolds hold significant potential in the eradication/elimination of bacterial biofilm, a critical step in regenerative endodontics.

Souakine mouth rinse solution protects deciduous enamel from simulated erosion in vitro.

AIM: To determine whether a souakine mouth rinse solution can provide protection of deciduous teeth against simulated erosion in vitro. MATERIALS AND METHODS: Thirty deciduous anterior teeth were used. Half of each tooth was covered with a varnish and teeth were randomly divided into a treated (S) and a control group (C). Each group was immersed in cola drink for 5 minutes and treated with an aqueous solution of Souakine (S) or water (C) for 2 minutes. The treatment was renewed 5 times a day for 8 days. Teeth were then embedded, sectioned and observed under polarised light microscope. Observed data were quantitatively analysed by SPSS software. RESULTS: In group (C), the unvarnished part of the enamel showed a deep green layer of erosion, compared to the varnished part. The difference in depth of this layer was significant (p<0.05). In group (S), the green layer of erosion was highly located in the unvarnished part as compared to the unvarnished part of the control group (C) (p<0.05). This layer of erosion was comparable to that in the varnished part, either in control or treated groups. CONCLUSION: The beneficial results of Souakine against erosion are validated either by a protective or a remineralisation effect.

Clinical and radiographic outcomes of traumatized immature permanent necrotic teeth after revascularization/revitalization therapy.

INTRODUCTION: Revascularization treatment is rapidly becoming an accepted treatment alternative for the management of endodontic pathology in immature permanent teeth with necrotic dental pulps. However, the success and timing of clinical resolution of symptoms, and radiographic outcomes of interest, such as continued hard tissue deposition within the root, are largely unknown. METHODS: In this prospective cohort study, 20 teeth were treated with a standardized revascularization treatment protocol and monitored for clinical and radiographic changes for 1 year. Standardized radiographs were collected at regular intervals, and radiographic changes were quantified. RESULTS: All 20 treated teeth survived during the 12-month follow-up period, and all 20 also met the clinical criteria for success at 12 months. As a group, the treated teeth showed a statistically significant increase in radiographic root width and length and a decrease in apical diameter, although the changes in many cases were quite small (such that the clinical significance is unclear). The within-case percent change in apical diameter after 3 months was 16% and had increased to 79% by 12 months, with 55% (11/20) showing complete apical closure. The within-case percent change in root length averaged less than 1% at 3 months and increased to 5% at 12 months. The within-case percent change in root thickness averaged 3% at 3 months and 21% at 12 months. CONCLUSIONS: Although clinical success was highly predictable with this procedure, clinically meaningful radiographic root thickening and lengthening are less predictable after 1-year of follow-up. Apical closure is the most consistent radiographic finding.

Treatment of dentinal hypersensitivity by means of Nd:YAP Laser: a preliminary in vitro study.

OBJECTIVE: The aim of this study is to evaluate the effectiveness of Nd:YAP laser to seal dentinal tubules at different parameters. MATERIAL AND METHODS: 24 caries-free human wisdom impacted molars were used. The crowns were sectioned transversally in order to totally expose the dentin. The smear layer was removed by a 1 min application of EDTA. Each surface was divided into four quadrants, but only three quadrants were irradiated at a different output power setting (irradiation speed: 1 mm/sec; optical fiber diameter: 320 µm; tangential incidence of beam and in noncontact mode). Samples were smeared with a graphite paste prior to laser irradiation. All specimens were sent for SEM analysis. Pulp temperature increases in additional twenty teeth were measured by a thermocouple. RESULTS: Morphological changes in dentin surfaces depend on the value of used energy density. Higher energy densities (2 W-4 W; 200-400 mJ; pulse duration: 100 m sec.; and 10 Hz) induce higher dentin modifications. Our results confirmed that Nd:YAP laser irradiations can lead to total or partial occlusion of dentin tubules without provoking fissures or cracks. Measurements of pulp temperature increases showed that Nd:YAP laser beam can be considered as harmless for pulp vitality for following irradiation conditions: 2 W (200 mJ) to 4 W (400 mJ) with an irradiation speed of 1 mm/sec; fiber diameter: 320 micrometers; 10 Hz; pulse duration: 100 m sec; noncontact mode and in tangential incidence to exposed dentin. The perpendicular incidence of the laser beam on exposed dentin may injure pulp vitality even at low output power of 3 W. CONCLUSIONS: Nd:YAP laser beam was able to seal the dentin tubules without damaging dentinal surfaces and without harming pulp vitality. Nd:YAP laser is effective and may be safely used for future in vivo treatments of dentinal hypersensitivity under certain conditions.

The effects of CO2 laser with or without nanohydroxyapatite paste in the occlusion of dentinal tubules.

The aim of this study was to evaluate a new treatment modality for the occlusion of dentinal tubules (DTs) via the combination of 10.6 µm carbon dioxide (CO2) laser and nanoparticle hydroxyapatite paste (n-HAp). Forty-six sound human molars were used in the current experiment. Ten of the molars were used to assess the temperature elevation during lasing. Thirty were evaluated for dentinal permeability test, subdivided into 3 groups: the control group (C), laser only (L-), and laser plus n-HAp (L+). Six samples, two per group, were used for surface and cross section morphology, evaluated through scanning electron microscope (SEM). The temperature measurement results showed that the maximum temperature increase was 3.2 °C. Morphologically groups (L-) and (L+) presented narrower DTs, and almost a complete occlusion of the dentinal tubules for group (L+) was found. The Kruskal-Wallis nonparametric test for permeability test data showed statistical differences between the groups (P < 0.05). For intergroup comparison all groups were statistically different from each other, with group (L+) showing significant less dye penetration than the control group. We concluded that CO2 laser in moderate power density combined with n-HAp seems to be a good treatment modality for reducing the permeability of dentin.

Erosion protection by calcium lactate/sodium fluoride rinses under different salivary flows in vitro.

This study investigated the effect of a calcium lactate prerinse on sodium fluoride protection in an in vitro erosion-remineralization model simulating two different salivary flow rates. Enamel and dentin specimens were randomly assigned to 6 groups (n = 8), according to the combination between rinse treatments - deionized water (DIW), 12 mM NaF (NaF) or 150 mM calcium lactate followed by NaF (CaL + NaF) - and unstimulated salivary flow rates - 0.5 or 0.05 ml/min - simulating normal and low salivary flow rates, respectively. The specimens were placed into custom-made devices, creating a sealed chamber on the specimen surface connected to a peristaltic pump. Citric acid was injected into the chamber for 2 min, followed by artificial saliva (0.5 or 0.05 ml/min) for 60 min. This cycle was repeated 4×/day for 3 days. Rinse treatments were performed daily 30 min after the 1st and 4th erosive challenges, for 1 min each time. Surface loss was determined by optical profilometry. KOH-soluble fluoride and structurally bound fluoride were determined in specimens at the end of the experiment. Data were analyzed by 2-way ANOVA and Tukey tests (α = 0.05). NaF and CaL + NaF exhibited significantly lower enamel and dentin loss than DIW, with no difference between them for normal flow conditions. The low salivary flow rate increased enamel and dentin loss, except for CaL + NaF, which presented overall higher KOH-soluble and structurally bound fluoride levels. The results suggest that the NaF rinse was able to reduce erosion progression. Although the CaL prerinse considerably increased F availability, it enhanced NaF protection against dentin erosion only under hyposalivatory conditions.

Effect of the crown, post, and remaining coronal dentin on the biomechanical behavior of endodontically treated maxillary central incisors.

STATEMENT OF PROBLEM: It is unclear how the amount of remaining coronal dentin and the type of post and core rehabilitation affect the strain, stress distribution, and fracture resistance of endodontically treated teeth. PURPOSE: The purpose of this study was to evaluate the effects of the type of post, type of crown, and the amount of remaining coronal dentin on the biomechanical behavior of endodontically treated teeth. MATERIAL AND METHODS: The investigation was conducted by using 3-dimensional finite element analysis and laboratory tests. Three-dimensional models of a maxillary central incisor were generated: without remaining coronal dentin, with 1.0 mm of remaining coronal dentin, with 2.0 mm of remaining coronal dentin, and restored with a glass-fiber post or a cast post and core in combination with a metal crown or an alumina-reinforced ceramic crown. The results were evaluated by using the von Mises criterion and Maximum Principal Stress. One hundred twenty bovine incisors were selected and divided into 12 treatment groups (n=10). Specimens were loaded at a 135-degree angle to perform strain measurements and were then loaded until fracture. The strain and fracture resistance results were analyzed with 3-way analysis of variance and the Tukey honestly significant difference test (α=.05). RESULTS: The alumina-reinforced ceramic crowns and metal crowns associated with a glass-fiber post showed a homogeneous stress distribution within the root. The cast post and core concentrated higher stresses at the post-dentin interface. Significant differences were found among the mean fracture resistance values for all groups (P<.05). The presence of 2.0 mm of coronal remnants resulted in lower strains and higher fracture resistance for both the metal and ceramic crowns. Roots restored with glass-fiber posts exhibited more favorable fractures. CONCLUSIONS: The presence of 2 mm of remaining coronal dentin improved the mechanical behavior of the endodontically treated maxillary incisors. Teeth restored with glass-fiber posts and composite resin cores showed a homogeneous stress distribution within the root dentin.

The role of grape seed extract in the remineralization of demineralized dentine: micromorphological and physical analyses.

OBJECTIVES: Grape seed extract (GSE) is known to have a positive effect on the demineralization and/or remineralization of artificial root caries lesions. The present study aimed to investigate whether biomodification of caries-like acid-etched demineralized dentine, using proanthocyanidins-rich GSE, would promote its remineralization potential. DESIGNS: Dentine specimens were acid-etched for 30s, then biomodified using proanthocyanidin-based preconditioners (at different concentrations and pH values) for 2min, followed by a 15-day artificial remineralization regimen. They were subsequently subjected to microhardness measurements, micromorphological evaluation and X-ray diffraction analyses. Stability of the preconditioners was also analyzed, spectrophotometrically. RESULTS: A concentration-dependent increase was observed in the microhardness of the specimens that were biomodified using GSE preconditioners, without pH adjustment. Field emission scanning electron microscopy revealed greater mineral deposition on their surfaces, which was further identified mainly as hydroxylapatite. The absorbances of preconditioner dilutions at pH 7.4 and pH 10.0 decreased at the two typical polyphenol bands. CONCLUSIONS: Transient GSE biomodification promoted remineralization on the surface of demineralized dentine, and this process was influenced by the concentration and pH value of the preconditioner. GSE preconditioner at a concentration of 15%, without pH adjustment, presented with the best results, and this may be attributed to its high polyphenolic content.

Dentine sensitivity: past, present and future.

OBJECTIVE: This review defines dentine sensitivity (DS), its prevalence, its aetiology, the mechanism(s) responsible for DS, its diagnosis and its treatment. The review then examines the modes of action of various treatments for DS including potassium salts, strontium salts, bioglasses, arginine/calcium carbonate and professional treatments such as adhesives and oxalates. The methods used to evaluate the various treatment modalities are discussed, including laboratory studies and randomised controlled clinical trials. DATA SOURCES AND STUDY SELECTION: A literature search was conducted using PubMed, Ovid Medline and Cochrane reviews for information on DS and its treatments, as well as laboratory and clinical studies used to evaluate the efficacy of various DS treatments. With regard to efficacy of treatments for DS only reports of clinical studies that were randomised, controlled and blinded were reviewed. The authors offer new insights into the shortcomings of the recent systematic review of the use of oxalates for DS. CONCLUSION: The authors introduce the concept of a novel desensitising mouthrinse containing 1.4% potassium oxalate: Listerine® Advanced Defence Sensitive mouthrinse. Readers of this supplement issue of the Journal of Dentistry are invited to review the significance of managing the clinical problem of DS. They are also invited to assess data from laboratory and randomised controlled clinical studies in order to understand the advantages offered by regular use of 1.4% potassium oxalate-containing mouthrinse, Listerine Advanced Defence Sensitive, in particular its resistance to daily erosive and/or abrasive challenges.

Chemomechanical caries removal in primary molars : evaluation of marginal leakage and shear bond strength in bonded restorations--an in vitro study.

OBJECTIVES: To evaluate and compare the efficiency, marginal leakage and shear bond strength of Carisolv and Papacarie in primary molars. METHOD: Freshly extracted 60 human carious primary molars were randomly divided into two experimental groups--Group I [caries removal by Carisolv] and Group II [caries removal by Papacarie]. The amount of time taken for complete caries removal was recorded using a stopwatch. After bonded restorations, both the experimental groups were further randomly subdivided into four experimental groups and subjected to marginal leakage and shear bond strength evaluation. RESULTS: Papacarie [337.67 +/- 18.13] was clinically more efficient than Carisolv [461.33 +/- 27.76] in removing caries with respect to time in seconds. 66.7% of teeth treated with Carisolv did not show any marginal leakage as compared to 20% with Papacarie. The mean [ +/- SD] shear bond strength of Carisolv [9.67 +/- 3.80] treated teeth was slightly more when compared to Papacarie [8.36 +/- 4.51]. CONCLUSION: Papacarie was clinically more efficient in caries removal but showed significantly more marginal leakage than Carisolv.

In vitro reproduction of incisal/occlusal cupping/cratering.

STATEMENT OF PROBLEM: Occlusal cupping/cratering (depressed dentin surrounded by elevated rims of enamel) has been postulated to be the result of abrasion, bruxism, attrition, acid erosion, stress corrosion, or a combination of these. The primary etiology or the multifactorial sequence of occlusal cupping/cratering remains scientifically unsubstantiated. PURPOSE: The purpose of this study was to reproduce occlusal/incisal cupping/cratering in vitro. This study was designed to create cupping/cratering on the occlusal surfaces of extracted human teeth rather than to quantify the amount of lost tooth structure caused by abrasion. MATERIAL AND METHODS: One name-brand toothbrush was tested with 2 different dentifrices (of different abrasive potentials [low and high]) and water only (nonabrasive) on extracted human teeth. Six specimens of 4 teeth each (24 teeth) were subjected to horizontal brushing in a 1:1 toothpaste/water slurry and water only. RESULTS: The control group, brushed with water only, demonstrated no visible loss of tooth structure. Each of the specimens brushed with toothpaste, regardless of the degree of abrasivity, demonstrated visible wear of the dentin, resulting in occlusal/incisal cupping/cratering. CONCLUSIONS: Pronounced cupping/cratering was caused by horizontal brushing with commercial toothpastes. Brushing in water demonstrated no visual loss of occlusal tooth structure. (J Prosthet Dent 2013;109:384-391).