Phytotoxicity of trihalomethanes and trichloroacetic acid on Vigna radiata and Allium cepa plant models.

Disinfection by-products (DBPs) are a concern due to their presence in chlorinated wastewater, sewage treatment plant discharge, and surface water, and their potential for environmental toxicity. Despite some attention to their ecotoxicity, little is known about the phytotoxicity of DBPs. This study aimed to evaluate the individual and combined phytotoxicity of four trihalomethanes (THMs: trichloromethane (TCM), bromodichloromethane (BDCM), dibromochloromethane (DBCM), and tribromomethane (TBM) and their mixture (THM4)), and trichloroacetic acid (TCAA) using genotoxic and cytotoxic assays. The analysis included seed germination tests using Vigna radiata and root growth tests, mitosis studies, oxidative stress response, chromosomal aberrations (CA), and DNA laddering using Allium cepa. The results showed a progressive increase in root growth inhibition for both plant species as the concentration of DBPs increased. High concentrations of mixtures of four THMs resulted in significant (p < 0.05) antagonistic interactions. The effective concentration (EC50) value for V. radiata was 5655, 3145, 2690, 1465, 3570, and 725 mg/L for TCM, BDCM, DBCM, TBM, THM4, and TCAA, respectively. For A. cepa, the EC50 for the same contaminants was 700, 400, 350, 250, 450, and 105 mg/L, respectively. DBP cytotoxicity was observed through CAs, including C-metaphase, unseparated anaphase, lagging chromosome, sticky metaphase, and bridging. Mitotic depression (MD) increased with dose, reaching up to 54.4% for TCAA (50-500 mg/L). The electrophoresis assay showed DNA fragmentation and shearing, suggesting genotoxicity for some DBPs. The order of phytotoxicity for the tested DBPs was TCAA > TBM > DBCM > BDCM > THM4 > TCM. These findings underscore the need for further research on the phytotoxicity of DBPs, especially given their common use in agricultural practices such as irrigation and the use of sludge as manure.

Antiviral Natural Products, Their Mechanisms of Action and Potential Applications as Sanitizers and Disinfectants.

Plant extracts, natural products and plant oils contain natural virucidal actives that can be used to replace active ingredients in commercial sanitizers and disinfectants. This review focuses on the virucidal mechanisms of natural substances that may exhibit potential for indoor air and fomite disinfection. Review of scientific studies indicates: (1) most natural product studies use crude extracts and do not isolate or identify exact active antiviral substances; (2) many natural product studies contain unclear explanations of virucidal mechanisms of action; (3) natural product evaluations of virucidal activity should include methods that validate efficacy under standardized disinfectant testing procedures (e.g., carrier tests on applicable surfaces or activity against aerosolized viruses, etc.). The development of natural product disinfectants requires a better understanding of the mechanisms of action (MOA), chemical profiles, compound specificities, activity spectra, and the chemical formulations required for maximum activity. Combinations of natural antiviral substances and possibly the addition of synthetic compounds might be needed to increase inactivation of a broader spectrum of viruses, thereby providing the required efficacy for surface and air disinfection.

Sub-lethal toxicity of five disinfection by-products on microalgae determined by flow cytometry - Lines of evidence for adverse outcome pathways.

Standardised tests are often used to determine the ecotoxicity of chemicals and focus mainly on one or a few generic endpoints (e.g. mortality, growth), but information on the sub-cellular processes leading to these effects remain usually partial or missing. Flow cytometry (FCM) can be a practical tool to study the physiological responses of individual cells (such as microalgae) exposed to a stress via the use of fluorochromes and their morphology and natural autofluorescence. This work aimed to assess the effects of five chlorine-based disinfection by-products (DBPs) taken individually on growth and sub-cellular endpoints of the green microalgae Raphidocelis subcapitata. These five DBPs, characteristic of a chlorinated effluent, are the following monochloroacetic acid (MCAA), dichloroacetic acid (DCAA), trichloroacetic acid (TCAA), bromochloroacetic acid (BCAA) and 1,1-dichloropropan-2-one (1,1-DCP). Results showed that 1,1-DCP had the strongest effect on growth inhibition (EC50 = 1.8 mg.L-1), followed by MCAA, TCAA, BCAA and DCAA (EC50 of 10.1, 15.7, 27.3 and 64.5 mg.L-1 respectively). Neutral lipid content, reactive oxygen species (ROS) formation, red autofluorescence, green autofluorescence, size and intracellular complexity were significantly affected by the exposure to the five DBPs. Only mitochondrial membrane potential did not show any variation. Important cellular damages (>10%) were observed for only two of the chemicals (BCAA and 1,1-DCP) and were probably due to ROS formation. The most sensitive and informative sub-lethal parameter studied was metabolic activity (esterase activity), for which three types of response were observed. Combining all this information, an adverse outcome pathways framework was proposed to explain the effect of the targeted chemicals on R. subcapitata. Based on these results, both FCM sub-cellular analysis and conventional endpoint of algal toxicity were found to be complementary approaches.

Management Quality of Surgical Instrument and Influence of Cleaning and Sterilization on the Surgical Outcomes of the Patient: A Review.

When a medical device or surgical instrument comes into contact with the patient's sterile tissue or mucous membrane during the various processes, the risk of introducing infections into the patient's body increases. Furthermore, an infection may be transmitted from one patient to another, from a patient to a member of the medical staff and vice versa or from the environment to the patient via improperly sterilized or disinfected equipment. A number of outbreaks and diseases have been documented in the hospital setting as a result of poorly sanitized devices. As a result, adequate disinfection procedures for medical and surgical items are required in all healthcare facilities. It is equally the responsibility of healthcare providers to reduce and eliminate such infections. Each hospital should have its own standards for sterilization and disinfection of equipment based on the intended use of medical devices and associated infections. In order to reduce the risk of both endogenous and exogenous infections, infection control procedures must be implemented in general practice. Using a formulation containing alcohol alone or in combination with other agents to properly wash hands after each patient's checkup and before any procedure reduces the likelihood of transmitting infections to and from patients. Sterilization and disinfection are the most important aspects of infection control. The most common sterilization methods are steam sterilizers and ethylene dioxide sterilizers. Trash generated during practice should be handled according to protocol and rules, as it may be a source of nosocomial infections. Trained personnel are required to carry out these procedures.

The effectiveness of disinfection protocols in osteopathic family medicine offices.

CONTEXT: Healthcare-associated infections (HAIs) pose a substantial public health threat. Despite significant strides to curb HAIs in hospital environments, outpatient settings have not received the same degree of attention. Given their emphasis on holistic, patient-centered care, osteopathic family medicine offices are pivotal in both disease prevention and comprehensive patient treatment. The importance of simple yet effective disinfection protocols, such as thorough cleaning between patient appointments, cannot be overstated in these settings because they are integral to minimizing disease transmission. OBJECTIVES: This study aims to assess the effectiveness of the current disinfection protocols in osteopathic family medicine offices. METHODS: A cross-sectional study evaluating disinfection practices on 18 examination tables in an osteopathic family medicine office was conducted. Two high-touch surfaces (midtorso region and table edge) were examined. Initial swab samples were collected after morning disinfection by Environmental Services, and terminal swab samples were gathered after day's-end disinfection by the medical staff. Adenosine triphosphate (ATP) bioluminescence assays were performed utilizing AccuPoint Advanced HC Reader, which quantified ATP, indicating contamination levels in the samples. The higher the ATP levels found in a sample, the greater the amount of biological contamination. All samplers were handled and tested as per manufacturer's instructions. A preliminary trial was conducted to confirm the internal validity of ATP bioluminescence measurements. The statistical analysis involved Shapiro-Wilk and Wilcoxon signed-rank tests, with significance set at p<0.05. Cohen's d test was utilized to calculate the effect size, identifying meaningful differences in initial and terminal swab sample relative light units (RLUs). RESULTS: The midtorso region demonstrated an 11.1 % increase in failure rate after terminal disinfection when compared to initial disinfection. A Wilcoxon signed-rank test revealed a median estimated pathogen level for the midtorso region that was higher after terminal disinfection (median, 193 RLUs; range, 1-690 RLUs; n=18) compared to initial disinfection (median, 134 RLUs; range, 4-946 RLUs; n=18). However, this increase was not statistically significant, p=0.9124, with a small effect size, d=0.04. The edge showed no change in failure rate after terminal disinfection, maintaining a 100 % failure rate both before and after disinfection. However, the Wilcoxon signed-rank test revealed a slight reduction in the median estimated pathogen levels after terminal disinfection (median, 2095 RLUs; range, 891-5,540 RLUs; n=18) compared to before disinfection (median, 2,257 RLUs; range, 932-5,825 RLUs; n=18). However, this reduction was not statistically significant, p=0.61, with a small effect size, d=0.12. CONCLUSIONS: The findings from this study reveal a substantial disparity in outcomes between the two sample locations, midtorso and edge. The midtorso demonstrated a relatively low failure rate in both initial and terminal swab samples, indicating successful outcomes. In contrast, the edge consistently displayed a 100 % failure rate, emphasizing the need for more care and attention when cleaning the edge of the examination to ensure better outcomes. By prioritizing adequate disinfection protocols, including thorough cleaning between patients, osteopathic family medicine offices can more effectively prevent disease transmission and promote patient safety.

Adjunctive use of different lasers Er, Cr: YSGG, femtosecond, potassium titanyl phosphate and photodynamic therapy on radicular disinfection bonded to glass fiber post.

OBJECTIVE: The aim of this study was to evaluate and compare the effect of different laser prototypes [Er, Cr: YSGG laser (ECYL), potassium titanyl phosphate laser (KTP), and Femtosecond laser (FSL)]and curcumin photosensitizer (CP) activated by Photodynamic therapy (PDT) on the bond strength of Pre-fabricated fiber reinforced composite (PFRC) post-bonded to radicular dentin. MATERIALS AND METHODS: A total of fifty mandibular single-rooted closed apex teeth were extracted carefully, assembled, and decoronated up to the cementoenamel junction. The working length of all specimens was determined by using a 10 K patency file and later, were cleaned and shaped with Protaper NiTi system using the crown down approach, dried, and obturated with gutta-percha using an AH Plus sealer. Post space was prepared by guiding peeso-reamer. Based on the method of disinfection, the samples were allocated to five groups (n=10) at random: samples in group 1: curcumin photosensitizer (CP) activated by PDT, samples in group 2 disinfected using 5.25% NaOCl+17% EDTA, samples in group 3 disinfected using 5.25% NaOCl+17% EDTA+FSL, specimens in group 4 sterilized using 5.25% NaOCl+17% EDTA+KTP and samples in group 5 cleaned with 5.25% NaOCl+17% EDTA+ECYL. The fiber post was cemented via self-etch resin cement into the post space. All specimens with posts were dissected perpendicularly into apical, middle, and coronal dentin and subjected to the universal testing machine for push-out bond strength (PBS) testing. Statistical analysis was performed using a One-Way analysis of variance and Post Hoc Tukey multiple comparison tests. RESULTS: The highest PBS was corroborated when the radicular canal was disinfected with 5.25% NaOCl +17% EDTA+ ECYL at all three root levels (coronal, middle, and apical) and the lowest was adjudicated by decontamination with CP activated by PDT at all inspected root levels. Intergroup comparison presented that specimens in group 2: 5.25% NaOCl+17% EDTA (control) and group 4: 5.25% NaOCl+17% EDTA+KTP revealed comparable PBS outcome to group 5 (p>0.05) while samples in group 3 revealed the equivalent PBS values to group 1 (p<0.05) at all three root levels. CONCLUSIONS: Er, Cr: YSGG laser and potassium titanyl phosphate laser when used in combination with the conventional canal disinfection 5.25% NaOCl and 17% EDTA demonstrated the highest push-out bond strength values at coronal, middle, and apical levels of the root.

Characterization of young biofilm morphology, disinfection byproduct formation potential and toxicity of renewed water supply pipelines by phosphorus release from corroded pipes.

The deterioration of drinking water quality due to corrosion of the water supply network has become inevitable and regular renewal of pipes has become a common means of doing so. Severely corroded pipes release certain nutrients (e.g., elemental phosphorus), however, little has been reported on the effect of old pipes on the young biofilm of new pipe sections and on ensuring water safety in the early stages of the water supply. The aim of our study was to model the effect of key phosphorus nutrients released from corroded old pipes on the morphological characteristics of young biofilms in new pipe sections, mediated disinfection byproducts (DBPs) production and their combined toxicity. Based on the experimental results, phosphorus showed significant differences in the morphological characteristics, spatial structure of extracellular polymers (EPS), functional abundance, disinfection byproduct formation potential (DBPsFP) and toxicity of young biofilms. Under residual chlorine (1.0 ± 0.2 mg/L) incubation, the functional abundance of young biofilm metabolism was dominant, particularly amino acid metabolism and carbohydrate metabolism. There is a dynamic balance between the trophic and shedding effects of phosphorus, where concentration changes affect young biofilm morphology and DBPFP. Relatively moderate phosphorus concentrations resulted in the highest density of PN/PS organic precursors in EPS and a clear advantage of DBPFP; relatively high phosphorus conditions had limited promotion of young biofilm, while membrane structure shedding was more pronounced, increasing young biofilm-mediated DBPs production. Nitrogen-containing disinfection byproducts (N-DBPs) in young biofilms had a clear toxicity advantage, with HANs and HNMs being key to controlling cytotoxicity and genotoxicity, respectively.

Advanced and Readily-Available Wireless-Powered Blue-Light-Implant for Non-Invasive Peri-Implant Disinfection.

Non-invasive light-based antibacterial therapy has a good prospect in non-surgical treatment of peri-implant infections. However, its applications are severely limited by poor penetration of light into human tissues, leading to unsatisfying outcomes. Moreover, as an essential prerequisite for traditional light therapy, lasers can no longer meet the patients' needs for convenient treatment at any time. To break through the spatial and temporal limitations of traditional light therapy, a wireless-powered blue-light zirconia implant for readily available treatment of peri-implant infection is proposed. In space, complete irradiation to complex peri-implant structure is realized by the built-in wireless-powered light source, thus improving the efficacy. In time, wireless-powering allows timely and controllable anti-infection treatment. Blue micro-light emitting diodes are used as therapeutic light sources, which effectively kill peri-implant infection-related bacteria without exogenous photosensitive agents. Porphyromonas gingivalis biofilm on implant surface can be completely killed after 20 min irradiation in vitro. The bactericidal rate of peri-implant methicillin-resistant Staphylococcus aureus infection reaches 99.96 ± 0.03% under 30 min per day blue light exposure in vivo. Within the scope of this study, the treatment of peri-implant infection with blue-light implant has preliminary feasibility, giving a new approach to non-invasive treatment of deep oral infections, including peri-implant infections.

Integrated genotoxicity of secondary and tertiary treatment effluents in North China.

Genotoxic effects on aquatic organisms caused by wastewater discharging have raised extensive concerns. However, the efficiency of various wastewater treatment processes to reduce effluent genotoxicity was not well known. Genotoxic effects of effluents from four secondary wastewater treatment plants (SWTPs) and a tertiary wastewater treatment plant (TTP) in north China on Chinese rare minnows (Gobiocypris rarus) were evaluated and the toxicity reduction efficiency of various treatment techniques was compared. SWTPs and TTP final effluents disturbed the antioxidant system and lipid peroxidation, with malondialdehyde (MDA) contents in the fish livers and gills increasing to 1.4-2.4 folds and 1.6-3.1 folds of control, respectively. Significant increases in erythrocytes micronucleus (MN) frequency were induced by effluent, and liver DNA damage caused by final SWTPs effluent was 29-54 % lower than TTP effluent. Further, DNA repair gene atm and growth arrest gene gadd45a were remarkably upregulated by SWTP and TTP final effluents to 1.8-12 folds and 4.1-15 folds, respectively, being consistent with the chromosomal aberration and DNA damage in liver tissue. Integrated biomarker response (IBR) of the tertiary effluent was 49 %-69 % lower than the secondary effluents. However, the final ozone disinfection at TTP caused an increase in the DNA damage, suggesting the generation of genotoxic by-products. UV disinfection at secondary treatment removed part of genotoxicity, with a reduction in IBR of 0 %-47 %. The total semi-volatile organic compounds (SVOCs) detected in the final effluent contained 5 %-56 % potential genotoxic substances, removal of which was 9 %-51 % lower than non-genotoxic compounds. Microfiltration and reverse osmosis process exhibited good performance in removing both the integrated genotoxicity and the potential genotoxic SVOCs. Our finding shows that TTP is superior than SWTP for wastewater treatment due to higher genotoxicity removal, but ozone disinfection needs improvement by optimizing performance parameters or adding post-treatment processes, to achieve better protection for aquatic organisms against genotoxic contaminants.

Efficacy of disinfection procedures performed prior to regenerative endodontic therapy: An integrative review.

The aim of this integrative review was to identify whether the disinfection procedures performed prior to regenerative endodontic treatment were effective on biofilm removal from the root canals. The research was based on PubMed, Latin American and Caribbean Health Sciences Literature (Lilacs) and Scientific Electronic Library Online (SciELO) databases. Four articles were selected; one of the studies was in vivo and the others ex vivo. Different disinfection procedures were studied, characterised mainly by the use of intracanal medication, highlighting the double antibiotic paste, triple antibiotic paste and calcium hydroxide paste. Disinfection ability was evaluated against Enterococcus faecalis and multispecies biofilms by using the fluorescence technique and colony forming unit counting, for 7 to 21 days. Double antibiotic paste and triple antibiotic paste demonstrated excellent antibiofilm activity, unlike CH paste that showed limited disinfection, even when associated with different antimicrobial agents. Triple antibiotic paste was the most effective medication against biofilm.

Waste treatment innovation for infusion bottles using soil solution.

The amount of medical waste, especially infusion bottles, is a problem for environmental pollution. Improper management of infusion bottle waste can have an impact on disease transmission. The medical waste treatment used high technology and high costs will be a financial burden, so simple and effective treatment innovations is needed. This study uses an experimental method of removing bacteria from infusion bottles using a mixture of water and Andoso soil as a solution for washing infusion bottle waste. The soil solution concentration used in washing was 45% with a contact time of 2 minutes. The experiment was carried out with two repetitions. The treatment effect on decreasing the number of bacteria using a multiple linear regression mathematical model. The results showed that the disinfection process of bacterial-contaminated infusion bottles using water required rinsing up to six times, whereas using 45% andosol soil solution only rinsed once. The effectiveness of the disinfection of infusion bottles contaminated with bacteria using soil solution reduces the number of bacteria by 98%.

Efficient and reusable photocatalytic river water disinfection by addictive graphitic carbon nitride/magnesium oxide nano-onions with particular "nano-magnifying glass effect".

Photocatalytic disinfection is a promising way to combat bacterial pollution in the water environment. Inefficient use of visible light and undirected diffusion of reactive oxygen species (ROS) reduce photocatalytic disinfection efficiency. Herein, inspired by the concentrating effect of convex lens, photocatalysts with particular "nano-magnifying glass effect" (TCNMgNOs) were designed by embedding magnesium oxide with "converge effect" into the tailored hierarchical triple-shell porous g-C3N4 with "one light multi-purpose effect" to boost the visible-light utilization. Meanwhile, the ATPase hydrolysis homeostasis of bacteria was destroyed by TCNMgNOs to achieve the targeted movement of ROS. The results confirmed that the photocatalytic sterilization efficiency of TCNMgNOs was amplified by 30 times over g-C3N4, which was achieved by focusing visible light, multiple reflecting visible light and light transmission within the porous thin shells as well as the "addictive sterilization mechanism". The sterilization efficiency still maintains 98.8 % (15 min) after 6 rounds recycling and reusing in practical river water disinfection. A novel pathway for fighting against microbial contaminants in natural water was explored.

Disinfection methods of dental unit waterlines contamination: a systematic review.

Background. Severe contamination of dental unit waterlines was found in healthcare settings. The benefits of decontamination methods are controversial. The aim of this review was to systematically evaluate disinfection methods in contamination control of dental unit waterlines.Methods. The terms 'dental unit waterline(s) or DUWL(s) or dental unit water line(s)' were searched through PubMed, Cochrane Library, Embase, Web of Science and Scopusup to 31 May 2021. The DUWLs' output water was incubated on R2A agar at 20-28 °C for 5-7 days to evaluate heterotrophic mesophilic bacteria. The risk of bias was evaluated by a modified Newcastle-Ottawa quality assessment scale.Results. Eighteen papers from the literature were included. One study indicated that water supply played a crucial role in disinfecting DUWLs. Three studies indicated that flushing decreased bacteria counts but did not meet the American CDC standard (500 c.f.u. ml-1). All chlorine- and peroxide-containing disinfectants except sodium hypochlorite in one of 15 studies as well as three mouthrinses and citrus botanical extract achieved the standard (≤500 c.f.u. ml-1). The included studies were of low (1/18), moderate (6/18) and high (11/18) quality.Conclusion. Independent water reservoirs are recommended for disinfecting DUWLs using distilled water. Flushing DUWLs should be combined with disinfections. Nearly all the chlorine-, chlorhexidine- and peroxide-containing disinfectants, mouthrinses and citrus botanical extract meet the standard for disinfecting DUWLs. Alkaline peroxide would lead to tube blockage in the DUWLs. Regularly changing disinfectants can reduce the risk of occurrence of disinfectant-resistant strains of microbes.

[Comparison of three root canal disinfection methods for removal of Enterococcus faecalis under minimally invasive root canal treatment].

PURPOSE: To obtain an efficient and simple root canal disinfection method based on minimally invasive root canal treatment by comparing different root canal disinfection methods between minimally invasive root canal treatment and conventional root canal treatment. METHODS: Sixty-six extracted maxillary first molars were randomly divided into experimental group (computer-guided precision minimally invasive root canal treatment) and control group (conventional root canal treatment). All teeth were prepared to ProTaper universal F2, and Enterococcus faecalis infection models were established.Each group was randomly divided into three subgroups, sodium hypochlorite+EDTA root canal irrigation, sodium hypochlorite+EDTA+ultrasonic and sodium hypochlorite +EDTA +Er: YAG laser. After root canal disinfection,the samples were collected by paper tip method and cultured, and colony forming units (CFU) values of each sample were calculated. Then dentin debris was prepared and collected with F3 file. After being diluted and cultured, the CFU value was calculated. Statistical analysis was performed by SPSS 26.0 software package. RESULTS: Comparison of the amount of bacterial inner wall of root canal between the experimental group and the control group showed that the germicidal efficacy of group C and group B were significantly better than that of group A (P＜0.05), but there was no significant difference between group B and group C(P＞0.05). In the experimental group, there was significant difference between group B1, C1 and A1 (P＜0.05). The results of group B1 and C1 were lower than that of group A1, but there was no significant difference between group B1 and group C1(P＞0.05). In the control group, there were significant differences between group B2, C2 and A2 (P＜0.05). The results of group B2 and C2 were lower than that of group A2, but there was no significant difference between group B2 and C2(P＞0.05). Comparison of the amount of bacteria in dentin debris between the experimental group and the control group showed that the effect of group C was the best, followed by group B, and group A, and there were significant differences between three groups(P＜0.05). CONCLUSIONS: The disinfection effect of Er:YAG laser or ultrasound assisted computer-guided precision minimally invasive root canal treatment is similar to conventional root canal treatment, and Er:YAG laser is better than ultrasound in removing bacteria from dentinal tubules, which is more suitable for minimally invasive root canal treatment.

Efficacy of contemporary agents on disinfection and surface roughness of polyetheretherketone implant abutments.

AIM: The present study was designed to estimate the disinfection and surface roughness (Ra) of colonized (E. coli, C. albicans, S.aureus, and S. mutans) PEEK implant abutment disinfected with PDT, chemical, and herbal agents. MATERIAL AND METHODS: The American Type Culture Collection (ATCC) inoculated E.coli, C.albicans, S.mutans, and S.aureus in an in-vitro scenario using 60 PEEK implant abutment samples provided by the manufacturer. Following that, the samples were distributed in four disinfection methods categories - group 1: 5 mM Rose Bengal PS (RB), group 2: ultrasonic disinfection (UD), group 3: 2% glutaraldehyde (GaH), and group 4: tea tree oil (TTO). To scrutinize the data and compare the means and standard deviations of CFU/mL (log10) for exposed E. coli, Candida albicans, S.aureus, and S.mutans, a two-way ANOVA and Tukey's multiple comparison test were performed. RESULTS: Specimens treated with 2% GaH, UD, and TTO validated a significant reduction in E. coli, C. albicans, S aureus, and S. mutans CFU/mL (log10) colonies. Intragroup assessment designated that there is no reduction in CFU/mL (log10) of E.coli and C.albicans when PEEK implant abutment specimens are irradiated with 5 Mm RB. A decline is seen in values of S. aureus, and S. mutans microbial strains on treatment with all four cleansers while the computation of C.albicans and E.coli colonies unveiled significant reduction with GaH, UD, and TTO except RB (p < 0.05). The results of Ra showed that PEEK fabricated implant abutment specimens, when treated with UD (3.472 ± 0.561 µm), displayed a significantly higher Ra value as compared to other analyzed cleansing methods. CONCLUSION: Disinfection with 2% glutaraldehyde and tea tree oil showed maximum antimicrobial efficacy and lower Ra values for PEEK implant abutments colonized with bacterial strains of E.coli, C.albicans, S.aureus, and S.mutans.

Coral-like potassium and phosphorous doped graphitic carbon nitride structures with enhanced charge and mass transfer dynamics toward photocatalytic hydrogen peroxide production and microbial disinfection.

This study provided insight on the design of co-doped graphitic carbon nitride (g-C3N4) structures by using potassium dihydrogen phosphate (KH2PO4) as a promising material for the supply of potassium (K) and phosphorus (P) elements. The addition of KH2PO4 to the cyanuric acid-melamine complex (CM) solution stabilized its structure by coordinating potassium ions (K+) in the hexagonal pores and dihydrogen phosphate ions (H2PO4-) in dangling bonds on the edge sites. The resultant supramolecular structure (KP-CM) with a unique skeleton governed the polycondensation process, resulting in K and P co-doped g-C3N4 structures with a distinct coral-like morphology (KP-CN). Employing the KP-CM complex as a precursor could modify the optoelectronic behaviour of the photocatalysts via the synergistic effect of the co-doping process. It could also be beneficial in terms of economic considerations by increasing the catalyst synthesis yield. The resulting g-C3N4 showed a remarkable hydrogen peroxide (H2O2) production rate of 216 µmol L-1h-1 compared to the rate of the pristine sample of 137 µmol L-1h-1. It also exhibited significant photocatalytic antibacterial activity in Escherichia coli (E. coli) disinfection.

Vishaghn Dhoop, Nano-Scale Particles with Detoxifying Medicinal Fume, Exhibits Robust Anti-Microbial Activities: Implications of Disinfection Potentials of a Traditional Ayurvedic Air Sterilization Technique.

The rapidly increasing global burden of healthcare associated infections (HAI) is resulting in proportionate increase in chemical disinfection in healthcare settings, adding an extra burden of environmental toxicity. Therefore, alternative disinfection techniques with less or no adverse side-effects need to be explored. In this regard, ayurvedic 'dhoopan' technique involving slow combustion of medicinal herbs, minerals and animal products hold great promise. In this study, dhoopan of a traditionally defined ayurvedic medicinal mix, 'Vishaghn Dhoop' (VD) has been assessed for its anti-microbial potentials against both Gram-positive and negative pathogenic bacteria, Mycobacterium and pathogenic fungus, Candida albicans. Fume generated from slow combustion of VD was subjected to physico-chemical characterization and was assessed for anti-microbial effects. VD fume contained particles of 354 ± 84 nm size, laden with anti-microbial metabolites. On agar plates, VD fumigation reduced bacterial growth by 13 - 38%. Liquid culture aeration with VD fume inhibited bacterial growth by 50 - 85%, and fungal growth by 80%. In real life settings (in vivo), un-sanitized rooms fumigated with VD fumes for 30 min reduced the environmental microbial loads by 10 folds. In addition, the safety of VD fumigation was evaluated through in vitro cytotoxicity assay on human lung epithelial (A549) cells. Cells exposed to media-collected VD fumes for 24 h exhibited normal cyto-safety profile. Collectively, these observations provide scientific evidence in support of a traditional technique of disinfection, which can be fine-tuned to have implications in clinical, healthcare and food industry where, disinfection is a prime requirement.

Comparison of bacterial disinfection efficacy using blue and red lights on dental implants contaminated with Aggregatibacter actinomycetemcomitans.

OBJECTIVES: The purpose of this study was to determine the bacterial disinfection efficacy of four photosensitizers (PSs; curcumin, riboflavin, toluidine blue O, and phycocyanin) with blue diode laser (Blue DL) and blue light-emitting diode (Blue LED) or Red DL and Red LED in dental implants contaminated with Aggregatibacter actinomycetemcomitans. MATERIALS AND METHODS: A total of 60 dental implants were contaminated with A. actinomycetemcomitans. All implants were then randomized into ten different disinfection modalities (n = 6 implants per group). The irradiation wavelength in Blue DL and Blue LED or Red DL and Red LED was 450, 430-460, 635, and 630 nm, respectively and its applied energy density was 60 J/cm2 in all groups. Group IX was served as the control group and in group X disinfection was performed with 0.2% chlorhexidine. After the treatments, the colony forming units (CFUs)/ml were calculated to determine antimicrobial effects of each treatment. RESULTS: All disinfection methods significantly reduced bacteria amounts of dental implants inoculated with A. actinomycetemcomitans compared to control group. The CFU/ml in LED group was significantly lower than the DL in all studied groups. CONCLUSION: aPDT could be an effective supplement in dental implants disinfection. The LED, proved to be better in reducing CFU/ml of A. actinomycetemcomitans on dental implants surface than DL.

Ammonia gas for bacterial control in poultry litter / Gás amônia para controle bacteriano em cama aviária

The current techniques used in the disinfection of reused poultry litter, such as lime addition, windrowing and plastic cover on the surface, do not guarantee the elimination of pathogenic microorganisms, causing damage to the environment and animal health. Gram negative bacteria, i.e., Salmonella and Escherichia coli, can be transmitted from one batch to another through reused litter, causing health damage to broilers and humans that consume food contaminated by these agents. Our study assessed the effectiveness of the methods plastic cover on the surface (PCS) and plastic cover on the surface with ammonia gas injection (PCSAI) in the control of Gram negative bacteria. The results obtained, both in laboratory conditions (Experiment 1) and in the field (Experiment 2), demonstrate that the method PCSAI with 0.22% ammonia gas had a significant reduction (P<0.05) of Gram negative bacteria in the period of 48 hours This new methodology for disinfecting poultry litter will allow its reuse in a practical and safe way, improving the preservation of the environment, of the health of broilers and consumers of poultry products.

O reaproveitamento de camas aviárias na criação de frangos de corte é uma prática muito utilizada no Brasil. Essa prática reduz custos de produção e contribui na conservação do meio ambiente. As técnicas atuais utilizadas na desinfecção de camas aviárias reaproveitadas, como adição de cal, enleiramento e lona na superfície, não garantem a eliminação de microrganismos patogênicos porque não geram quantidade suficiente de amônia. O gás amônia, em concentrações elevadas, tem efeito biocida. Bactérias Gram negativas, como as Salmonelas e Escherichia coli, podem ser transmitidas de um lote para outro através do reaproveitamento da cama, ocasionando prejuízos para a saúde das aves e dos humanos que consomem alimentos contaminados por estes agentes. Este trabalho avaliou a eficácia do método lona na superfície com injeção de gás amônia no controle de microrganismos Gram negativos. Os resultados obtidos demostraram que esse método controlou os microrganismos Gram negativos num período de 48 horas em camas de frangos de corte reaproveitadas. Assim, essa nova metodologia de desinfecção de camas de aviário permitirá sua reutilização de forma prática e segura, melhorando a saúde das aves e dos consumidores dos produtos avícolas.

Disinfection capabilities of a 222 nm wavelength ultraviolet lighting device: a pilot study.

OBJECTIVE: To demonstrate the efficacy of the SafeZone UVC (Ushio Inc., Japan) 222 nm ultraviolet C (UVC) light to reduce bacterial burden in pressure ulcers (PUs) in human patients. This research is the first human clinical trial using 222 nm UVC in eradicating bacteria in human wounds. METHOD: Patients with Stage 2 or 3 (as defined by the revised National Pressure Ulcer Advisory Panel Pressure Injury Staging System) sacral or gluteal pressure ulcers (PUs) were subjected to four sessions of 222 nm UVC light therapy over two weeks. Pre- and post-UVC therapy, wound cultures were taken and quantitative analysis of bacterial colony forming units (CFU) were performed. RESULTS: A total of 68 UV light sessions across 16 different patients were conducted. Of these sessions, 59 (87.0%) sessions showed a reduction in CFU counts, with 20 (29.4%) showing complete eradication of bacteria. Bacteria identified included meticillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella Pneumoniae. The overall median reduction in CFU of the 68 sessions was 78.9%. No adverse events were reported in any of the UV sessions. CONCLUSION: In this study, 222 nm UVC light was safe and effective in reducing bacterial CFU counts in sacral and gluteal PUs across numerous different species of bacteria.