Folding Dynamics of 3,4,3-LI(1,2-HOPO) in Its Free and Bound State with U4+ Implicated by MD Simulations.

The octadentate hydroxypyridonate ligand 3,4,3-LI(1,2-HOPO) (t-HOPO) shows strong binding affinity with actinide cations and is considered as a promising decorporation agent used to eliminate in vivo actinides, while its dynamics in its unbound and bound states in the condensed phase remain unclear. In this work, by means of MD simulations, the folding dynamics of intact t-HOPO in its neutral (t-HOPO0) and in its deprotonated state (t-HOPO4-) were studied. The results indicated that the deprotonation of t-HOPO in the aqueous phase significantly narrowed the accessible conformational space under the simulated conditions, and it was prepared in a conformation that could conveniently clamp the cations. The simulation of UIV-t-HOPO showed that the tetravalent uranium ion was deca-coordinated with eight ligating O atoms from the t-HOPO4- ligand, and two from aqua ligands. The strong electrostatic interaction between the U4+ ion and t-HOPO4- further diminished the flexibility of t-HOPO4- and confined it in a limited conformational space. The strong interaction between the U4+ ion and t-HOPO4- was also implicated in the shortened residence time of water molecules.

Actinide Decorporation: A Review on Chelation Chemistry and Nanocarriers for Pulmonary Administration.

Chelation is considered the best method for detoxification by promoting excretion of actinides (Am, Np, Pu, Th, U) from the human body after internal contamination. Chemical agents that possess carboxylic acid or hydroxypyridinonate groups play a vital role in actinide decorporation. In this review article, we provide considerable background details on the chelation chemistry of actinides with an aim to formulate better decorporation agents. Nanocarriers for pulmonary delivery represent an exciting prospect in the development of novel therapies for actinide decorporation that both reduce toxic side effects of the agent and improve its retention in the body. Recent studies have demonstrated the benefits of using a nebulizer or an inhaler to administer chelating agents for the decorporation of actinides. Effective chelation therapy with large groups of internally contaminated people can be a challenge unless both the agent and the nanocarrier are readily available from strategic national stockpiles for radiological or nuclear emergencies. Sunflower lecithin is particularly adept at alleviating the burden of administration when used to form liposomes as a nanocarrier for pulmonary delivery of diethylenetriamine-pentaacetic acid (DTPA) or hydroxypyridinone (HOPO). Better physiologically-based pharmacokinetic models must be developed for each agent in order to minimize the frequency of multiple doses that can overload the emergency response operations.

In Vitro and In Vivo Evaluation of DTPA-HPMA Copolymers as Potential Decorporating Agents for Prophylactic Therapy of Actinide Contamination.

The release of actinides into the environment represents a significant potential public health concern. Chelation therapy utilizing diethylenetriamine pentaacetate (DTPA) is a U.S. Food and Drug Administration (FDA)-approved therapy capable of mitigating the deposition of some absorbed actinides in the body. However, the pharmacokinetic profile of DTPA is not ideal for prophylactic applications. In this study, we examine the incorporation of DTPA into a HPMA copolymer (P-DTPA) to investigate if the enhanced blood circulation time can offer superior prophylactic protection and of improving in vivo radiometal decorporation. Utilizing lutetium-177 (177Lu) as an actinide model, the performance of P-DTPA and DTPA (control) were evaluated using selectivity studies in the presence of competing biological metals, chelation and stability assays in human serum and cytotoxicity studies using human umbilical vein endothelial cells (HUVEC). The in vivo decorporation efficiency of P-DTPA relative to DTPA and untreated controls was also evaluated over two weeks in CF-1 mice. In the experimental groups, the mice were prophylactically treated with P-DTPA or DTPA (30 µmol/kg) 6 or 24 h prior to 177LuCl3 administration. The in vitro results reveal that P-DTPA gives efficient complexation yields relative to DTPA with a tolerable cytotoxicity profile and good serum stability. The in vivo decorporation studies demonstrated enhanced total excretion of the 177Lu using P-DTPA compared to DTPA in both the 6 and 24 h prophylactic treatment study arms. This enhanced decorporation effect is certainly attributable to the expected prolonged biological half-life of DTPA when grafted to the HPMA polymer.

α-Aminophosphonates, -Phosphinates, and -Phosphine Oxides as Extraction and Precipitation Agents for Rare Earth Metals, Thorium, and Uranium: A Review.

α-Aminophosphonates, -phosphinates, and -phosphine oxides are a group of organophosphorus compounds that were investigated as extraction agents for rare earth (RE) metals and actinoids for the first time in the 1960s. However, more systematic investigations of their extraction properties towards REs and actinoids were not started until the 2010s. Indeed, recent studies have shown that these α-amino-functionalized compounds can outperform the commercial organophosphorus extraction agents in RE separations. They have also proven to be very efficient extraction and precipitation agents for recovering Th and U from RE concentrates. These actinoids coexist with REs in some of the commercially important RE-containing minerals. The efficient separation and purification of REs is becoming more and more important every year as these elements have a pivotal role in many existing technologies. If one also considers the facile synthesis of α-amino-functionalized organophosphorus extractants and precipitation agents, it is expected that they will be increasingly utilized in the extraction chemistry of REs and actinoids in the future. This review collates α-aminophosphonates, -phosphinates, and -phosphine oxides that have been utilized in the separation chemistry of REs and actinoids, including their most relevant synthetic routes and molecular properties. Their extraction and precipitation properties towards REs and actinoids are also discussed.

In Vivo Uranium Decorporation by a Tailor-Made Hexadentate Ligand.

The sequestration of uranium, particularly from the deposited bones, has been an incomplete task in chelation therapy for actinide decorporation. Part of the reason is that all previous decorporation ligands are not delicately designed to meet the coordination requirement of uranyl cations. Herein, guided by DFT calculation, we elaborately design a hexadentate ligand (TAM-2LI-MAM2), whose preorganized planar oxo-donor configuration perfectly matches the typical coordination geometry of the uranyl cation. This leads to an ultrahigh binding affinity to uranyl supported by an in vitro desorption experiment of uranyl phosphate. Administration of this ligand by prompt intraperitoneal injection demonstrates its uranyl removal efficiencies from the kidneys and bones are up to 95.4% and 81.2%, respectively, which notably exceeds all the tested chelating agents as well as the clinical drug ZnNa3-DTPA, setting a new record in uranyl decorporation efficacy.

Chelating Polymers for Targeted Decontamination of Actinides: Application of PEI-MP to Hydroxyapatite-Th(IV).

In case of an incident in the nuclear industry or an act of war or terrorism, the dissemination of plutonium could contaminate the environment and, hence, humans. Human contamination mainly occurs via inhalation and/or wounding (and, less likely, ingestion). In such cases, plutonium, if soluble, reaches circulation, whereas the poorly soluble fraction (such as small colloids) is trapped in alveolar macrophages or remains at the site of wounding. Once in the blood, the plutonium is delivered to the liver and/or to the bone, particularly into its mineral part, mostly composed of hydroxyapatite. Countermeasures against plutonium exist and consist of intravenous injections or inhalation of diethylenetetraminepentaacetate salts. Their effectiveness is, however, mainly confined to the circulating soluble forms of plutonium. Furthermore, the short bioavailability of diethylenetetraminepentaacetate results in its rapid elimination. To overcome these limitations and to provide a complementary approach to this common therapy, we developed polymeric analogs to indirectly target the problematic retention sites. We present herein a first study regarding the decontamination abilities of polyethyleneimine methylcarboxylate (structural diethylenetetraminepentaacetate polymer analog) and polyethyleneimine methylphosphonate (phosphonate polymeric analog) directed against Th(IV), used here as a Pu(IV) surrogate, which was incorporated into hydroxyapatite used as a bone model. Our results suggest that polyethylenimine methylphosphonate could be a good candidate for powerful bone decontamination action.

Porphyrinoid actinide complexes.

The diverse coordination modes and electronic features of actinide complexes of porphyrins and related oligopyrrolic systems (referred to as "porpyrinoids") have been the subject of interest since the 1960s. Given their stability and accessibility, most work with actinides has focused on thorium and uranium. This trend is also seen in the case of porphyrinoid-based complexation studies. Nevertheless, the diversity of ligand environments provided by porphyrinoids has led to the stabilization of a number of unique complexes with the early actinides that are often without structural parallel within the broader coordination chemical lexicon. This review summarizes key examples of prophyrinoid actinide complexes reported to date, including the limited number of porphyrinoid systems involving transuranic elements. The emphasis will be on synthesis and structure; however, the electronic features and reactivity pattern of representative systems will be detailed as well. Coverage is through December of 2021.

Microfluidic In-Situ Spectrophotometric Approaches to Tackle Actinides Analysis in Multiple Oxidation States.

The study and development of present and future processes for the treatment/recycling of spent nuclear fuels require many steps, from design in the laboratory to setting up on an industrial scale. In all of these steps, analysis and instrumentation are key points. For scientific reasons (small-scale studies, control of phenomena, etc.) but also with regard to minimizing costs, risks, and waste, such developments are increasingly carried out on milli- or microfluidic devices. The logic is the same for the chemical analyses associated with their follow-up and interpretation. Due to this, over the last few years, opto-microfluidic analysis devices adapted to the monitoring of different processes (dissolution, liquid-liquid extraction, precipitation, etc.) have been increasingly designed and developed. In this work, we prove that photonic lab-on-a-chip (PhLoC) technology is fully suitable for all actinides concentration monitoring along the plutonium uranium refining extraction (plutonium, uranium, reduction, extraction, or Purex) process. Several PhLoC microfluidic platforms were specifically designed and used in different nuclear research and development (R&D) laboratories, to tackle actinides analysis in multiple oxidation states even in mixtures. The detection limits reached (tens of µmol·L-1) are fully compliant with on-line process monitoring, whereas a range of analyzable concentrations of three orders of magnitude can be covered with less than 150 µL of analyte. Finally, this work confirms the possibility and the potential of coupling Raman and ultraviolet-visible (UV-Vis) spectroscopies at the microfluidic scale, opening the perspective of measuring very complex mixtures.

Actinide ion uptake from acidic radioactive feeds using an extraction chromatographic resin containing a branched dialkyl amide.

A dialkyl amide with branched alkyl group, viz. N,N-di(2-ethylhexyl)-propionamide (D2EHPrA) was used as the organic extractant in an extraction chromatographic resin prepared for the first time and evaluated for the separation of uranium from acidic feeds. The distribution coefficient measurements, carried out at varying HNO3 concentrations, indicated an increase in the UO22+ ion sorption with increasing nitric acid concentration. The UO22+ ion sorption kinetics and sorption isotherms with this resin were investigated in details. The column studies indicated that 8.3 mg of uranium could be loaded on a 2.1 cm3 column bed volume containing 0.35 g resin. Batch distribution data for other actinides such as Np4+ and Pu4+ indicated that the resin can also be used for effective separation of these metal ions from acidic feeds. Though the resin showed effectiveness for Np and Pu, detailed investigations dealing with macro concentrations of metal ions (in gm quantities) were restricted to uranium only due to hazardous nature of plutonium and limited availability of neptunium. The encouraging results reported in this work is an indication of the possible application of this resin for the recovery or pre-concentration of UO22+, Np4+ and Pu4+ ions from large volumes of aqueous solutions of moderate acidity.

Improved procedures of Sc(OH)3 precipitation and UTEVA extraction for 44Sc separation.

BACKGROUND: 44Sc is becoming attractive as a PET radionuclide due to its decay characteristics. It can be produced from 44Ca present in natural calcium with 2.08% abundance. MATERIALS AND METHODS: The targets were mostly prepared from natural CaCO3 or metallic calcium in the form of pellets. After irradiation they were dissolved in 3 M hydrochloric acid and 44Sc was separated from excess of calcium by precipitation of scandium hydroxide using ammonia. Alternatively, targets were dissolved in 11 M hydrochloric acid and 44Sc was separated by extraction chromatography on UTEVA resin. As the next step, in both processes 44Sc was further purified on a cation exchange resin. Initially, the separation procedures were developed with 46Sc as a tracer. Gamma spectrometry with a high purity germanium detector was used to determine the separation efficiency. Finally, the CaCO3 pellet with 99.2% enrichment in 44Ca was activated with protons via 44Ca(p,n)44Sc nuclear reaction. RESULTS: Altogether twenty two irradiations and separations were performed. The working procedures were developed and the quality of separated 44Sc solution was confirmed by radiolabeling of DOTATATE. The chemical purity of the product was sufficient for preclinical experiments. At the end of around 1 hour proton beam irradiation of CaCO3 pellet with 99.2% enrichment in 44Ca the obtained radioactivity of 44Sc was more than 4.8 GBq. CONCLUSION: 44Sc can be produced inexpensively with adequate yields and radionuclidic purity via 44Ca(p,n)44Sc nuclear reaction in small cyclotrons. The recovery yield in both investigated separation methods was comparable and amounted above 90%. The obtained 44Sc was pure in terms of radionuclide and chemical purity, as shown by the results of peptide radiolabeling.

Evaluation of Uncertainties in lung measurements of actinides due to counting statistics.

Counting statistics is an important parameter that can introduce uncertainties in the lung activity measurements of actinides in radiation workers. Evaluation of uncertainties due to counting statistics is practically difficult as it requires monitoring various radiation workers having different levels of lung actinide content, multiple times, each for 50 min of monitoring period. However, different activities in lungs can be simulated by combining uncontaminated male data with LLNL phantom data acquired with 241Am and natural uranium lung sets at various short periods. Therefore, multiple measurements were carried out on realistic thorax LLNL phantom with 241Am and natural uranium lung sets for 15-600 s. The mean counts with the phantom at various time intervals, corresponds to different actinide activities in lungs, assuming they are obtained for 50 min of monitoring interval. Using propagation of error, standard deviations were evaluated for combined phantom and uncontaminated adult male data. The combined standard deviations and mean phantom counts are used to evaluate scattering factors (SFs) for uncertainties due to counting statistics for Phoswich and HPGe array detectors. The SFs due to counting statistics are found to be the function of lung activities of radionuclides as well as energies and yields of the photons emitted by radionuclides. SFs are found to increase with decrease in lung activity. For similar yields photons, SFs are found to be lower for higher energy photons compared to lower energy photons. For photons of similar energies, the SFs are lower when yield is higher compared to lower yield photons.

A neptunium(v)-mediated interwoven transuranium-rotaxane network incorporating a mechanically interlocked [c2]daisy chain unit.

As an extension of actinide-rotaxane complexes from uranium to transuranium, we report the first crystal structure of a neptunium-rotaxane complex, NRCP-1, in which an interwoven neptunium(v)-rotaxane coordination network incorporating a mechanically-interlocked [c2]daisy chain unit is promoted via the simultaneous coordination of cucurbituril (CB6) and axle molecules in [2]pseudorotaxane to NpV.

Polyethyleneimine methylphosphonate: towards the design of a new class of macromolecular actinide chelating agents in the case of human exposition.

The use of uranium and to a minor extent plutonium as fuel for nuclear energy production or as components in military applications is under increasing public pressure. Uranium is weakly radioactive in its natural isotopy but its chemical toxicity, combined with its large scale industrial utilization, makes it a source of concern in terms of health impact for workers and possibly the general population. Plutonium is an artificial element that exhibits both chemical and radiological toxicities. So far, uranium (under its form uranyl, U(vi)) or plutonium (as Pu(iv)) decorporation or protecting strategies based on molecular design have been of limited efficiency to remove the actinide once incorporated after human exposure. In all cases, after human exposure, plutonium and uranium are retained in main target organs (liver, kidneys) as well as skeleton although they exhibit differences in their biodistribution. Polymers could represent an alternative strategy as their tropism for specific target organs has been reported. We recently reported on the complexation properties of methylcarboxylated polyethyleneimine (PEI-MC) with uranyl. In this report we extend our work to methylphosphonated polyethyleneimine (PEI-MP) and to the comparison between actinide oxidation states +IV (thorium) and +VI (uranyl). As a first step, thorium (Th(iv)) was used as a chemical surrogate of plutonium because of the difficulty in handling the latter in the laboratory. For both cations, U(vi) and Th(iv), the uptake curve of PEI-MP was recorded. The functionalized PEI-MP exhibits a maximum loading capacity comprised of between 0.56 and 0.80 mg of uranium (elemental) and 0.15-0.20 mg of thorium (elemental) per milligram of PEI-MP. Complexation sites of U(vi) and Th(iv) under model conditions close to physiological pH were then characterized with a combination of Fourier transform Infra Red (FT-IR) and Extended X-Ray Absorption Fine Structure (EXAFS). Although both cations exhibit different coordination modes, similar structural parameters with phosphonate functions were obtained. For example, the coordination sites are composed of fully monodentate phosphonate functions of the polymer chains. These physical chemical data represent a necessary basic chemistry approach before envisioning further biological evaluations of PEI-MP polymers towards U(vi) and Pu/Th(iv) contamination.

Skin absorption of actinides: influence of solvents or chelates on skin penetration ex vivo.

PURPOSE: To evaluate skin penetration and retention of americium (Am) and plutonium (Pu), in different chemical forms relevant to the nuclear industry and to treatment by chelation. MATERIALS AND METHODS: Percutaneous penetration of different Am and Pu forms were evaluated using viable pig skin with the Franz cell diffusion system. The behavior of the complex Pu-tributyl phosphate (Pu-TBP), Am or Pu complexed to the chelator Diethylene triamine pentaacetic acid (DTPA) and the effect of dimethyl sulfoxide (DMSO) was assessed. Radioactivity was measured in skin and receiver compartments. Three approaches were used to visualize activity in skin including the recent iQID technique for quantification. RESULTS: Transfer of Am was 24-fold greater than Pu and Pu-TBP complex penetration was enhanced by 500-fold. Actinide-DTPA transfer was greater than the Am or Pu alone (17-fold and 148-fold, respectively). The stratum corneum retained the majority of activity in all cases and both DMSO and TBP enhanced skin retention of Am and Pu, respectively. Histological and bioimaging data confirmed these results and the iQID camera allowed the quantification of skin activity. CONCLUSIONS: Skin penetration and fixation profiles are different depending on the chemical actinide form. Altered behavior of Pu-TBP and actinide-DTPA complexes reinforces the need to address decontamination protocols.

RELATIVE DISSOLUTION RATES OF RADIOACTIVE MATERIALS USED AT AWE.

A simple in vitro dissolution test was used to provide a semi-quantitative comparison of the relative dissolution rates of samples of radioactive materials used at Atomic Weapons Establishment in a lung fluid surrogate (Ringer's solution). A wide range of dissolution rates were observed for aged legacy actinides, freshly produced actinide alloys and actinides from waste management operations.

RETROSPECTIVE METHOD VALIDATION AND UNCERTAINTY ESTIMATION FOR ACTINIDES DETERMINATION IN EXCRETA BY ALPHA SPECTROMETRY.

Two essential technical requirements of ISO 17025 guide for accreditation of testing and calibration laboratories are the validation of methods and the estimation of all sources of uncertainty that may affect the analytical result. Bioelimination Laboratory from Radiation Dosimetry Service of CIEMAT (Spain) uses alpha spectrometry to quantify alpha emitters (Pu, Am, Th, U and Cm isotopes) in urine and faecal samples from workers exposed to internal radiation. Therefore and as a step previous to achieving the ISO 17025 accreditation, the laboratory has performed retrospective studies based on the obtained results in the past few years to validate the analytical method. Uncertainty estimation was done identifying and quantifying all the contributions, and finally the overall combined standard uncertainty was calculated.

Microbial mobilization of plutonium and other actinides from contaminated soil.

We examined the dissolution of Pu, U, and Am in contaminated soil from the Nevada Test Site (NTS) due to indigenous microbial activity. Scanning transmission x-ray microscopy (STXM) analysis of the soil showed that Pu was present in its polymeric form and associated with Fe- and Mn- oxides and aluminosilicates. Uranium analysis by x-ray diffraction (µ-XRD) revealed discrete U-containing mineral phases, viz., schoepite, sharpite, and liebigite; synchrotron x-ray fluorescence (µ-XRF) mapping showed its association with Fe- and Ca-phases; and µ-x-ray absorption near edge structure (µ-XANES) confirmed U(IV) and U(VI) oxidation states. Addition of citric acid or glucose to the soil and incubated under aerobic or anaerobic conditions enhanced indigenous microbial activity and the dissolution of Pu. Detectable amount of Am and no U was observed in solution. In the citric acid-amended sample, Pu concentration increased with time and decreased to below detection levels when the citric acid was completely consumed. In contrast, with glucose amendment, Pu remained in solution. Pu speciation studies suggest that it exists in mixed oxidation states (III/IV) in a polymeric form as colloids. Although Pu(IV) is the most prevalent and generally considered to be more stable chemical form in the environment, our findings suggest that under the appropriate conditions, microbial activity could affect its solubility and long-term stability in contaminated environments.

The first case of actinide triple helices: pH-dependent structural evolution and kinetically-controlled transformation of two supramolecular conformational isomers.

The first actinide triple helices, including two supramolecular conformational isomers of uranium(VI), have been synthesized with the aid of a flexible V-shaped ligand and a rigid aromatic base. The isomers exhibit an intriguing pH-dependent structural evolution and a kinetically-controlled transformation via a novel conformational rearrangement of the organic base.

In vitro metabolism and stability of the actinide chelating agent 3,4,3-LI(1,2-HOPO).

The hydroxypyridinonate ligand 3,4,3-LI(1,2-HOPO) is currently under development for radionuclide chelation therapy. The preclinical characterization of this highly promising ligand comprised the evaluation of its in vitro properties, including microsomal, plasma, and gastrointestinal fluid stability, cytochrome P450 inhibition, plasma protein binding, and intestinal absorption using the Caco-2 cell line. When mixed with active human liver microsomes, no loss of parent compound was observed after 60 min, indicating compound stability in the presence of liver microsomal P450. At the tested concentrations, 3,4,3-LI(1,2-HOPO) did not significantly influence the activities of any of the cytochromal isoforms screened. Thus, 3,4,3-LI(1,2-HOPO) is unlikely to cause drug-drug interactions by inhibiting the metabolic clearance of coadministered drugs metabolized by these enzymes. Plasma protein-binding assays revealed that the compound is protein-bound in dogs and less extensively in rats and humans. In the plasma stability study, the compound was stable after 1 h at 37°C in mouse, rat, dog, and human plasma samples. Finally, a bidirectional permeability assay demonstrated that 3,4,3-LI(1,2-HOPO) is not permeable across the Caco-2 monolayer, highlighting the need to further evaluate the effects of various compounds with known permeability enhancement properties on the permeability of the ligand in future studies.

Thin extractive membrane for monitoring actinides in aqueous streams.

Alpha spectrometry and solid state nuclear track detectors (SSNTDs) are used for monitoring ultra-trace amount of alpha emitting actinides in different aqueous streams. However, these techniques have limitations i.e. alpha spectrometry requires a preconcentration step and SSNTDs are not chemically selective. Therefore, a thin polymer inclusion membrane (PIM) supported on silanized glass was developed for preconcentraion and determination of ultra-trace concentration of actinides by α-spectrometry and SSNTDs. PIMs were formed by spin coating on hydrophobic glass slide or solvent casting to form thin and self-supported membranes, respectively. Sorption experiments indicated that uptakes of actinides in the PIM were highly dependent on acidity of solution i.e. Am(III) sorbed up to 0.1 molL(-1) HNO3, U(VI) up to 0.5 molL(-1) HNO3 and Pu(IV) from HNO3 concentration as high as 4 molL(-1). A scheme was developed for selective sorption of target actinide in the PIM by adjusting acidity and oxidation state of actinide. The actinides sorbed in PIMs were quantified by alpha spectrometry and SSNTDs. For SSNTDs, neutron induced fission-fragment tracks and α-particle tracks were registered in Garware polyester and CR-39 for quantifications of natural uranium and α-emitting actinides ((241)Am/(239)Pu/(233)U), respectively. Finally, the membranes were tested to quantify Pu in 4 molL(-1) HNO3 solutions and synthetic urine samples.