Constructing Interfacial Charge Transfer Channels and Electric Field in Violet Phosphorus-Based van der Waals Heterojunction for Phototherapy of Periodontitis.

Periodontitis, a chronic oral disease instigated by bacteria, severely compromises human oral health. The prevailing clinical treatment for periodontitis involves mechanical scraping in conjunction with antibiotics. Phototherapy is employed to rapidly remove the bacteria and achieve periodontitis treatment, effectively circumventing the adverse effects associated with traditional therapies. Constructing 2D/2D van der Waals (VDW) heterojunctions is a key strategy for obtaining excellent photocatalytic activity. Herein, a 2D/2D violet phosphorus (VP)/Ti3C2 VDW heterojunction is designed using an interfacial engineering strategy. By constructing an electron transport "bridge" (P-Ti bond) at the heterogeneous interface as an effective transfer channel for photogenerated carriers, a compact monolithic structure between the VP and Ti3C2 phases is formed, and the spatial barrier for electron transfer at the interface is eliminated. Meanwhile, the strong directional built-in electric field induced by the intensive electron-coupling effect at the heterogeneous interface served as an internal driving force, which greatly accelerates the exciton dissociation and charge transfer in the photocatalytic process. These excited photogenerated electrons and holes are trapped by O2 and H2O on the surfaces of Ti3C2 and VP, respectively, and are subsequently catalytically converted to antibacterial reactive oxygen species (ROS). The VP/Ti3C2 VDW heterojunction eradicated 97.5% and 98.48% of Staphylococcus aureus and Escherichia coli, respectively, by photocatalytic and photothermal effects under visible light for 10 min. The VP/Ti3C2 nanoperiodontal dressing ointment effectively attenuated inflammatory response, reduced alveolar bone resorption, and promoted periodontal soft and hard tissue repair. Its periodontitis therapeutic effect outperforms the clinically used Periocline.

Germination and stress tolerance of oats treated with pulsed electric field at different phases of seedling growth.

This study explores the impact of pulsed electric field (PEF) application on oat seedling growth and stress tolerance. PEF treatment (99 monopolar, rectangular pulses lasting 10 µs each, with a frequency of 13 Hz and a nominal electric field strength of 2250 V/cm) was applied at two growth stages: (i) when the seedlings had 0.2 cm roots emerging from the kernel, and (ii) when they had a 0.4 cm shoot emerging from the kernel. Post-treatment, the seedlings were hydroponically grown for 8 days. To induce stress, the hydroponic medium was augmented with PEG (15 %) to induce drought stress and NaCl (150 mM) to induce salinity stress. Results demonstrate that applying PEF improved the growth of the root and shoot of oat seedlings. This effect was more pronounced when applied to more developed seedlings. When PEF was applied during the later stage of germination, seedlings exposed to salinity stress showed enhanced shoot growth compared to the control. Under the studied conditions, the application of PEF had no impact on the growth of seedlings under drought stress.

EMEMI: An interference-free mini-incubator with integrated electric and magnetic field exposure for real-time microscopic imaging of field effects.

Uninterrupted microscopic observation and real-time imaging of cell behavior during exposure to the stimulus, for example, electric and/or magnetic fields, especially for periods of several days, has been a challenge in experimental bioelectromagnetics due to a lack of proper gas/temperature conditions outside the incubator. Conventional mini-incubators might suffer from stray fields produced by heating elements. We report an in vitro electric and magnetic fields (EMF) exposure system embedded inside a novel under-the-microscope mini-CO2 -incubator with a unique design to avoid electromagnetic interference from the heating and circulation functions while ensuring the requisite temperature. A unique, reconfigurable array of electrodes and/or coils excited by calculated current distributions among array elements is designed to provide excellent field uniformity and controllable linear or circular polarization (even at very low frequencies) of the EMF within the cell culture. Using standard biochemical assays, long-term cell viability has been verified and compared with a conventional incubator. Cell orientation/migration in three-dimensional culture made of collagen-hydrogels has been successfully observed in vitro, in long-term, and in real-time under the influence of DC electric fields with the device.

Mechanical behavior and microstructure of porcine brain tissues under pulsed electric fields.

Pulsed electric fields are extensively utilized in clinical treatments, such as subthalamic deep brain stimulation, where electric field loading is in direct contact with brain tissue. However, the alterations in brain tissue's mechanical properties and microstructure due to changes in electric field parameters have not received adequate attention. In this study, the mechanical properties and microstructure of the brain tissue under pulsed electric fields were focused on. Herein, a custom indentation device was equipped with a module for electric field loading. Parameters such as pulse amplitude and frequency were adjusted. The results demonstrated that following an indentation process lasting 5 s and reaching a depth of 1000 µm, and a relaxation process of 175 s, the average shear modulus of brain tissue was reduced, and viscosity decreased. At the same amplitude, high-frequency pulsed electric fields had a smaller effect on brain tissue than low-frequency ones. Furthermore, pulsed electric fields induced cell polarization and reduced the proteoglycan concentration in brain tissue. As pulse frequency increased, cell polarization diminished, and proteoglycan concentration decreased significantly. High-frequency pulsed electric fields applied to brain tissue were found to reduce impedance fluctuation amplitude. This study revealed the effect of pulsed electric fields on the mechanical properties and microstructure of ex vivo brain tissue, providing essential information to promote the advancement of brain tissue electrotherapy in clinical settings.

Environmental pollution removal using electrostimulation of microorganisms by alternative current.

The entrance of some toxic and hazardous chemical agents such as antibiotics, pesticides, and herbicides into the environment can cause various problems to human health and the environment. In recent years, researchers have considered the use of electrostimulation in the processes of microbial metabolism and biological systems for the treatment of pollutants in the environment. Although several electrostimulation reports have been presented for pollutant removal, little attention has been paid to alternative current (AC) biostimulation. This study presents a systematic review of microbial electrostimulation using bioelectrochemical systems supplied with AC. The utilization of alternating current bioelectrochemical systems (ACBESs) has some advantages such as the provide of appropriate active biofilms in the electrodes due to the cyclical nature of the current and energy transfer in an appropriate manner on the electrode surfaces. Moreover, the ACBESs can reduce hydraulic time (HRT) under optimal conditions and reduce the cost of converting electricity using AC. In microbial electrostimulation, amplitude (AMPL), waveform, C/N, and current have a significant effect on increasing the removal efficiency of the pollutants. The obtained results of the meta-analysis illustrated that various pollutants such as phenol, antibiotics, and nitrate have been removed in an acceptable range of 96% using the ACBESs. Therefore, microbial electrostimulation using AC is a promising technology for the decomposition and removal of various pollutants. Moreover, the ACBESs could provide new opportunities for promoting various bioelectrochemical systems (BESs) for the production of hydrogen or methane.

A remote sensing approach for exploring the dynamics of jellyfish, relative to the water current.

Drifting in large numbers, jellyfish often interfere in the operation of nearshore electrical plants, cause disturbances to marine recreational activity, encroach upon local fish populations, and impact food webs. Understanding the dynamic mechanisms behind jellyfish behavior is of importance in order to create migration models. In this work, we focus on the small-scale dynamics of jellyfish and offer a novel method to accurately track the trajectory of individual jellyfish with respect to the water current. The existing approaches for similar tasks usually involve a surface float tied to the jellyfish for location reference. This operation may induce drag on the jellyfish, thereby affecting its motion. Instead, we propose to attach an acoustic tag to the jellyfish's bell and then track its geographical location using acoustic beacons, which detect the tag's emissions, decode its ID and depth, and calculate the tag's position via time-difference-of-arrival acoustic localization. To observe the jellyfish's motion relative to the water current, we use a submerged floater that is deployed together with the released tagged jellyfish. Being Lagrangian on the horizontal plane while maintaining an on-demand depth, the floater drifts with the water current; thus, its trajectory serves as a reference for the current's velocity field. Using an acoustic modem and a hydrophone mounted to the floater, the operator from the deploying boat remotely changes the depth of the floater on-the-fly, to align it with that of the tagged jellyfish (as reported by the jellyfish's acoustic tag), thereby serving as a reference for the jellyfish's 3D motion with respect to the water current. We performed a proof-of-concept to demonstrate our approach over three jellyfish caught and tagged in Haifa Bay, and three corresponding floaters. The results present different dynamics for the three jellyfish, and show how they can move with, and even against, the water current.

Electric field distributions in realistic 3D rat head models during alternating electric field (AEF) therapy: a computational study.

Objective.Application of alternating electrical fields (AEFs) in the kHz range is an established treatment modality for primary and recurrent glioblastoma. Preclinical studies would enable innovations in treatment monitoring and efficacy, which could then be translated to benefit patients. We present a practical translational process converting image-based data into 3D rat head models for AEF simulations and study its sensitivity to parameter choices.Approach.Five rat head models composed of up to 7 different tissue types were created, and relative permittivity and conductivity of individual tissues obtained from the literature were assigned. Finite element analysis was used to model the AEF strength and distribution in the models with different combinations of head tissues, a virtual tumor, and an electrode pair.Main results.The simulations allowed for a sensitivity analysis of the AEF distribution with respect to different tissue combinations and tissue parameter values.Significance.For a single pair of 5 mm diameter electrodes, an average AEF strength inside the tumor exceeded 1.5 V cm-1, expected to be sufficient for a relevant therapeutic outcome. This study illustrates a robust and flexible approach for simulating AEF in different tissue types, suitable for preclinical studies in rodents and translatable to clinical use.

Treatment of diluted palm oil mill effluent (POME) synchronous with electricity production in a persulfate oxidant-promoted photocatalytic fuel cell.

Attributable to the prosperous production growth of palm oil in Malaysia, the generated palm oil mill effluent (POME) poses a high threat owing to its highly polluted characteristic. Urged by the escalating concern of environmental conservation, POME pollution abatement and potential energy recovery from the effluent are flagged up as a research topic of interest. In this study, a cutting-edge photocatalytic fuel cell (PFC) system with employment of ZnO/Zn nanorod array (NRA) photoanode, CuO/Cu cathode, and persulfate (PS) oxidant was successfully designed to improve the treatment of POME and simultaneous energy production. The photoelectrodes were fabricated and characterized by field emission scanning electron microscopy with energy (FESEM), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and Brunauer, Emmett, and Teller analysis (BET). Owing to the properties of strong oxidant of PS, the proposed PFC/PS system has exhibited exceptional performance, attaining chemical oxygen demand (COD) removal efficiency of 96.2%, open circuit voltage (Voc) of 740.0 mV, short circuit current density (Jsc) of 146.7 µA cm-2, and power density (Pmax) of 35.6 µW cm-2. The pre-eminent PFC/PS system performance was yielded under optimal conditions of 2.5 mM of persulfate oxidant, POME dilution factor of 1:20, and natural solution pH of 8.51. Subsequently, the postulated photoelectrocatalytic POME treatment mechanism was elucidated by the radical scavenging study and Mott-Schottky (M-S) analysis. The following recycling test affirmed the stability and durability of the photoanode after four continuous repetition usages while the assessed electrical energy efficiency revealed the economic viability of PFC system serving as a post-treatment for abatement of POME. These findings contributed toward enhancing the sustainability criteria and economic viability of palm oil by adopting sustainable and efficient POME post-treatment technology.

Alternative methods for RuBisCO extraction from sugar beet waste: A comparative approach of ultrasound and high voltage electrical discharge.

Ultrasound (US) and high voltage electric discharge (HVED) with water as a green solvent represent promising novel non-thermal techniques for protein extraction from sugar beet (Beta vulgaris subsp. vulgaris var. altissima) leaves. Compared to HVED, US proved to be a better alternative method for total soluble protein extraction with the aim of obtaining high yield of ribulose-1,5-bisphosphate carboxylase-oxygenase enzyme (RuBisCO). Regardless of the solvent temperature, the highest protein yields were observed at 100% amplitude and 9 min treatment time (84.60 ± 3.98 mg/gd.m. with cold and 96.75 ± 4.30 mg/gd.m. with room temperature deionized water). US treatments at 75% amplitude and 9 min treatment time showed the highest abundance of RuBisCO obtained by immunoblotting assay. The highest protein yields recorded among HVED-treated samples were observed at a voltage of 20 kV and a treatment time of 3 min, disregarding the used gas (33.33 ± 1.06 mg/gd.m. with argon and 34.89 ± 1.59 mg/gd.m. with nitrogen as injected gas), while the highest abundance of the RuBisCO among HVED-treated samples was noticed at 25 kV voltage and 3 min treatment time. By optimizing the US and HVED parameters, it is possible to affect the solubility and improve the isolation of RuBisCO, which could then be purified and implemented into new or already existing functional products.

Bioelectrochemical system accelerates reductive dechlorination through extracellular electron transfer networks.

Bioelectrochemical system is considered as a promising approach for enhanced bio-dechlorination. However, the mechanism of extracellular electron transfer in the dechlorinating consortium is still a controversial issue. In this study, bioelectrochemical systems were established with cathode potential settings at -0.30 V (vs. SHE) for trichloroethylene reduction. The average dechlorination rate (102.0 µM Cl·d-1) of biocathode was 1.36 times higher than that of open circuit (74.7 µM Cl·d-1). Electrochemical characterization via cyclic voltammetry illustrated that electrostimulation promoted electrochemical activity for redox reactions. Moreover, bacterial community structure analyses indicated electrical stimulation facilitated the enrichment of electroactive and dechlorinating populations on cathode. Metagenomic and quantitative polymerase chain reaction (qPCR) analyses revealed that direct electron transfer (via electrically conductive pili, multi-heme c-type cytochromes) between Axonexus and Desulfovibrio/cathode and indirect electron transfer (via riboflavin) for Dehalococcoides enhanced dechlorination process in BES. Overall, this study verifies the effectiveness of electrostimulated bio-dechlorination and provides novel insights into the mechanisms of dechlorination process enhancement in bioelectrochemical systems through electron transfer networks.

Rational Fabrication of Ionic Covalent Organic Frameworks for Chemical Analysis Applications.

The rapid development of advanced material science boosts novel chemical analytical technologies for effective pretreatment and sensitive sensing applications in the fields of environmental monitoring, food security, biomedicines, and human health. Ionic covalent organic frameworks (iCOFs) emerge as a class of covalent organic frameworks (COFs) with electrically charged frames or pores as well as predesigned molecular and topological structures, large specific surface area, high crystallinity, and good stability. Benefiting from the pore size interception effect, electrostatic interaction, ion exchange, and recognizing group load, iCOFs exhibit the promising ability to extract specific analytes and enrich trace substances from samples for accurate analysis. On the other hand, the stimuli response of iCOFs and their composites to electrochemical, electric, or photo-irradiating sources endows them as potential transducers for biosensing, environmental analysis, surroundings monitoring, etc. In this review, we summarized the typical construction of iCOFs and focused on their rational structure design for analytical extraction/enrichment and sensing applications in recent years. The important role of iCOFs in the chemical analysis was fully highlighted. Finally, the opportunities and challenges of iCOF-based analytical technologies were also discussed, which may be beneficial to provide a solid foundation for further design and application of iCOFs.

Impacts of dielectric screening on the luminescence of monolayer WSe2.

Single layers of transition metal dichalcogenides (TMDCs), such as WSe2have gathered increasing attention due to their intense electron-hole interactions, being considered promising candidates for developing novel optical applications. Within the few-layer regime, these systems become highly sensitive to the surrounding environment, enabling the possibility of using a proper substrate to tune desired aspects of these atomically-thin semiconductors. In this scenario, the dielectric environment provided by the substrates exerts significant influence on electronic and optical properties of these layered materials, affecting the electronic band-gap and the exciton binding energy. However, the corresponding effect on the luminescence of TMDCs is still under discussion. To elucidate these impacts, we used a broad set of materials as substrates for single-layers of WSe2, enabling the observation of these effects over a wide range of electrical permittivities. Our results demonstrate that an increasing permittivity induces a systematic red-shift of the optical band-gap of WSe2, intrinsically related to a considerable reduction of the luminescence intensity. Moreover, we annealed the samples to ensure a tight coupling between WSe2and its substrates, reducing the effect of undesired adsorbates trapped in the interface. Ultimately, our findings reveal how critical the annealing temperature can be, indicating that above a certain threshold, the heating treatment can induce adverse impacts on the luminescence. Furthermore, our conclusions highlight the influence the dielectric properties of the substrate have on the luminescence of WSe2, showing that a low electrical permittivity favours preserving the native properties of the adjacent monolayer.

Electrokinetic transport properties of deoxynucleotide monophosphates (dNMPs) through α-phase phosphorene carbide nanochannel for electrophoretic detection.

Electrokinetic identification of biomolecules is an effective analytical method in which an electric field drives the nucleic acids, peptides, and other species through a nanoscale channel and the time of flight (TOF) is recorded. The mobilities of the molecules are determined by the water/nanochannel interface, including the electrostatic interactions, surface roughness, van der Waals interactions, and hydrogen bonding. The recently reported α-phase phosphorus carbide (α-PC) has an intrinsically wrinkled structure that can efficiently regulate the migrations of biomacromolecules on it, making it a highly promising candidate for the fabrication of nanofluidic devices for electrophoretic detection. Herein, we studied the theoretical electrokinetic transport process of dNMPs in α-PC nanochannel. Our results clearly show that the α-PC nanochannel can efficiently separate dNMPs in a wide range of electric field strengths from 0.5 to 0.8 V nm-1. The electrokinetic speed order is deoxy thymidylate monophosphates (dTMP) > deoxy cytidylate monophosphates (dCMP) > deoxy adenylate monophosphates (dAMP) > deoxy guanylate monophosphates (dGMP) and is almost independent of the electric field strength. For a nanochannel with a typical height of 3.0 nm and an optimized electric field of 0.7-0.8 V nm-1, the difference in TOF is large enough to guarantee accurate identification. We find that dGMP is the weakest link among the four dNMPs for sensitive detection in the experiment because its velocity always shows large fluctuations. This is because of its significantly different velocities when dGMP is bound to α-PC in different orientations. In contrast, for the other three nucleotides, the velocities are independent of the binding orientations. The high performance of the α-PC nanochannel is attributed to its wrinkled structure in which the nanoscale grooves can form nucleotide-specific interactions that greatly regulate the transport velocities of the dNMPs. This study illustrates the high potential of α-PC for electrophoretic nanodevices. This could also provide new insights for the detection of other types of biochemical or chemical molecules.

Study on influencing parameters and long-term operation of electrocoagulation phosphorus removal from small rural domestic sewage.

Excessive discharge of phosphorus can produce eutrophication in aquatic environments, damaging public health, the living environment, and the economy. The conventional mechanical-biological phosphorus removal methods are not suitable for small rural domestic sewage due to the features of small scale, scattered distribution, intermittent emission, and large fluctuation. This work evaluated electrocoagulation (EC) with industrial steel as electrodes on small rural domestic sewage. Results showed that the best performance was achieved at a current density of 1 mA/cm2, electrode distance of 2 cm, electrode number of 2, pH of 7, and Hydraulic Retention Time of 30 min, respectively. Under optimum conditions, the EC process removed 93.91% phosphorus while consuming around 0.25 kWh/m3 of electricity. In addition, the electrode passivation of EC was further investigated; the long-term research found that the phosphorus removal efficiency only decreased by 4.34% after 10 days of continuous flow operation, and the operational energy consumption was 0.07 kWh/m3 at a Cl- concentration of 500 mg/L.

Next generation CANCAN focusing for remote stimulation by nanosecond electric pulses.

Focusing electric pulse effects away from electrodes is a challenge because the electric field weakens with distance. Previously we introduced a remote focusing method based on bipolar cancellation, a phenomenon of low efficiency of bipolar nanosecond electric pulses (nsEP). Superpositioning two bipolar nsEP into a unipolar pulse canceled bipolar cancellation ("CANCAN" effect), enhancing bioeffects at a distance despite the electric field weakening. Here, we introduce the next generation (NG) CANCAN focusing with unipolar nsEP packets designed to produce bipolar waveforms near electrodes (suppressing electroporation) but not at the remote target. NG-CANCAN was tested in CHO cell monolayers using a quadrupole electrode array and labeling electroporated cells with YO-PRO-1 dye. We routinely achieved 1.5-2 times stronger electroporation in the center of the quadrupole than near electrodes, despite a 3-4-fold field attenuation. With the array lifted 1-2 mm above the monolayer (imitating a 3D treatment), the remote effect was enhanced up to 6-fold. We analyzed the role of nsEP number, amplitude, rotation, and inter-pulse delay, and showed how remote focusing is enhanced when re-created bipolar waveforms exhibit stronger cancellation. Advantages of NG-CANCAN include the exceptional versatility of designing pulse packets and easy remote focusing using an off-the-shelf 4-channel nsEP generator.

Nonadjacent Wireless Electrotherapy for Tissue Repair by a 3D-Printed Bioresorbable Fully Soft Triboelectric Nanogenerator.

Electrotherapy is a promising tissue repair technique. However, electrotherapy devices are frequently complex and must be placed adjacent to injured tissue, thereby limiting their clinical application. Here, we propose a general strategy to facilitate tissue repair by modulating endogenous electric fields with nonadjacent (approximately 44 mm) wireless electrotherapy through a 3D-printed entirely soft and bioresorbable triboelectric nanogenerator based stimulator, without any electrical accessories, which has biomimetic mechanical properties similar to those of soft tissue. In addition, the feasibility of using the stimulator to construct an electrical double layer with tissue for nonadjacent wireless electrotherapy was demonstrated by skin and muscle injury models. The treated groups showed significantly improved tissue repair compared with the control group. In conclusion, we developed a promising electrotherapy strategy and may inspire next-generation electrotherapy for tissue repair.

Decomposition of Phosphorus Pollution and Microorganism Analysis Using Novel CW-MFCs under Different Influence Factors.

A constructed wetland (CW)-coupled microbial fuel cell (MFC) system was constructed to treat wastewater and generate electricity. The total phosphorus in the simulated domestic sewage was used as the treatment target, and the optimal phosphorus removal effect and electricity generation were determined by comparing the changes in substrates, hydraulic retention times, and microorganisms. The mechanism underlying phosphorus removal was also analyzed. By using magnesia and garnet as substrates, the best removal efficiencies of two CW-MFC systems reached 80.3% and 92.4%. Phosphorus removal by the garnet matrix mainly depends on a complex adsorption process, whereas the magnesia system relies on ion exchange reactions. The maximum output voltage and stabilization voltage of the garnet system were higher than those of the magnesia system. Microorganisms in the wetland sediments and electrode also changed considerably. It indicates that the mechanism of phosphorus removal by the substrate in the CW-MFC system is adsorption and chemical reaction between ions to generate precipitation. The population structure of proteobacteria and other microorganisms has an impact on both power generation and phosphorus removal. Combining the advantages of constructed wetlands and microbial fuel cells also improved phosphorus removal in coupled system. Therefore, when studying a CW-MFC system, the selection of electrode materials, matrix, and system structure should be taken into account to find a method that will improve the power generation capacity of the system and remove phosphorus.

Influence of power generation period on the oily sludge bio-electrical system.

The single-chamber bio-electrical systems can degrade oily sludge in sediments while generating electricity from the microbial fuel cells (MFCs) and their characteristics in energy and environmental effects have attracted wide international attention in recent years. To explore the influence of the power generation period on the oily sludge bio-electrical system, an oily sludge bio-electrical system was constructed. The output voltage, polarization curve, power density curve, crude oil removal rate and microflora were detected during different power generation periods, respectively. The results of this study showed that under the stable power generation period, the power generation and oily sludge degradation performance of MFC are higher than the voltage rise period and voltage attenuation period. Besides, the oily sludge bio-electrical system during the stable period contained more electricity-producing bacteria than the other two periods. The voltage in the stable period of oily sludge bio-electrical system is about 280 mV, the electromotive force is 493.1 mV and the power density is 134.93 mW·m-3. It lays a foundation for the improvement of degradation of crude oil and power generation performance in oily sludge bio-electrical system.

The Importance of Subcellular Structures to the Modeling of Biological Cells in the Context of Computational Bioelectromagnetics Simulations.

Numerical investigation of the interaction of electromagnetic fields with eukaryotic cells requires specifically adapted computer models. Virtual microdosimetry, used to investigate exposure, requires volumetric cell models, which are numerically challenging. For this reason, a method is presented here to determine the current and volumetric loss densities occurring in single cells and their distinct compartments in a spatially accurate manner as a first step toward multicellular models within the microstructure of tissue layers. To achieve this, 3D models of the electromagnetic exposure of generic eukaryotic cells of different shape (i.e. spherical and ellipsoidal) and internal complexity (i.e. different organelles) are performed in a virtual, finite element method-based capacitor experiment in the frequency range from 10 Hz to 100 GHz. In this context, the spectral response of the current and loss distribution within the cell compartments is investigated and any effects that occur are attributed either to the dispersive material properties of these compartments or to the geometric characteristics of the cell model investigated in each case. In these investigations, the cell is represented as an anisotropic body with an internal distributed membrane system of low conductivity that mimics the endoplasmic reticulum in a simplified manner. This will be used to determine which details of the cell interior need to be modeled, how the electric field and the current density will be distributed in this region, and where the electromagnetic energy is absorbed in the microstructure regarding electromagnetic microdosimetry. Results show that for 5 G frequencies, membranes make a significant contribution to the absorption losses. © 2023 The Authors. Bioelectromagnetics published by Wiley Periodicals LLC on behalf of Bioelectromagnetics Society.