A label-free electrochemical magnetic aptasensor based on exonuclease III-assisted signal amplification for determination of carcinoembryonic antigen.

A novel label-free and exonuclease III (Exo III)-assisted signal amplification electrochemical aptasensor was constructed for the determination of carcinoembryonic antigen (CEA) via magnetic field-induced self-assembly of magnetic biocomposites (Fe3O4@Au NPs-S1-S2-S3). The magnetic biocomposites were acquired by modifying double-stranded DNA (S1-S2-S3) on the surface of Fe3O4@Au nanoparticles (Fe3O4@Au NPs). Among them, Fe3O4@Au NPs were used as carriers for magnetic separation, thiolated single-stranded DNA (S1) provided signal sequence, CEA aptamer (S2) worked as a recognition element, and complementary strand (S3) was used to form double strands. In the presence of CEA, S2 bonded with CEA competitively; the exposed S1 could not be cleaved since Exo III was inactive against ssDNA. The G-quadruplex/hemin complexes finally formed with the existence of K+, and the high electrochemical signal of G-quadruplex/hemin complexes was recorded by differential pulse voltammetry (DPV) at - 0.6 V. Conversely, in the absence of CEA, dsDNA was cleaved from the 3' blunt end by Exo III; the disappearance of G-rich sequence blocked the generation of the signal. This method exhibited good selectivity and sensitivity for the determination of CEA; the linear range was from 0.1 to 200 ng mL-1 and the limit of detection was 0.4 pg mL-1. Graphical abstract.

ZIF-8-Assisted NaYF4:Yb,Tm@ZnO Converter with Exonuclease III-Powered DNA Walker for Near-Infrared Light Responsive Biosensor.

This work reports a ZIF-8 (ZIF: Zeolitic Imidazolate Framework)-assisted NaYF4:Yb,Tm@ZnO upconverter for the photoelectrochemical (PEC) biosensing of carcinoembryonic antigen (CEA) under near-infrared (NIR) irradiation on a homemade 3D-printed device with DNA walker-based amplification strategy. The composite photosensitive material NaYF4:Yb,Tm@ZnO, as converter to transfer NIR import to photocurrent output, was driven from annealed NaYF4:Yb,Tm@ZIF-8. Yb3+ and Tm3+-codoped NaYF4 (NaYF4:Yb,Tm) converted NIR excitation into UV emission, matching with the absorption of ZnO for in situ excitation to generate the photocurrent. Upon target CEA introduction, the swing arm of DNA walker including the sequence of CEA aptamer carried out the sandwiched bioassembly with CEA capture aptamer on the G-rich anchorage DNA tracks-functionalized magnetic beads. Thereafter, DNA walker was triggered, and the swing arm DNA was captured by the G-rich anchorage DNA according to partly complementary pairing and Exonuclease III (Exo III) consumed anchorage DNA by a burnt-bridge mechanism to go into the next cycle. The released guanine (G) bases from DNA walker enhanced the photocurrent response on a miniature homemade 3D-printed device consisting of the detection cell, dark box, and light platform. Under optimal conditions, NaYF4:Yb,Tm@ZnO-based NIR light-driven PEC biosensor presented high sensitivity and selectivity for CEA sensing with a detection limit of 0.032 ng mL-1. Importantly, our strategy provides a new horizon for the development of NIR-based PEC biosensors in the aspect of developing MOF-derived photoelectric materials, flexible design of a 3D-printed device, and effective signal amplification mode.

Exonuclease III-assisted signal amplification strategy for sensitive fluorescence detection of polynucleotide kinase based on poly(thymine)-templated copper nanoparticles.

A sensitive and label-free fluorometric method has been developed for the determination of polynucleotide kinase (PNK) activity, by employing exonuclease III (Exo III)-assisted cyclic signal amplification and poly(thymine)-templated copper nanoparticles (polyT-CuNPs). In the presence of PNK, cDNA with 5'-hydroxyl termini was phosphorylated and then hybridized with tDNA to form the cDNA/tDNA duplex, which subsequently triggered the λ exonuclease cleavage reaction, eventually resulting in the release of tDNA. The released tDNA could unfold the hairpin structure of HP DNA to generate partially complementary duplex (tDNA/HP DNA), wherein the HP DNA possessed T-rich sequences (T30) and tDNA recognition sequence. With the help of Exo III digestion, the tDNA was able to initiate the cycle for the generation of T-rich sequences, the template for the formation of fluorescent CuNPs. Conversely, the cDNA could not be cleaved by λ exonuclease without PNK and individual HP DNA could not be hydrolyzed by Exo III. The T-rich sequence was caged in HP DNA, resulting in a weak fluorescence signal. Under optimized conditions, the fluorescence intensity was linearly correlated to a concentration range of 0.001 to 1 U mL-1 with a low detection limit of 2 × 10-4 U mL-1. Considering the intriguing analytical performance, this approach could be explored to screen T4 PNK inhibitors and hold promising applications in drug discovery and disease therapy.

Fluorometric determination of mercury(II) via a graphene oxide-based assay using exonuclease III-assisted signal amplification and thymidine-Hg(II)-thymidine interaction.

A highly sensitive and selective fluorometric method is described for determination of mercury(II). It is based on (a) the use of graphene oxide (GO) acting as a quencher of the fluoresence of the carboxy-fluorescein (FAM), and (b) of Hg(II)-triggered cleavage of the newly formed nucleic acid sequences harbored blunt 3'-hydroxyl termini by exonuclease III (Exo III) that leads to signal amplification. Two DNA probes are used, viz. a capture probe (CP) and a help probe; HP) that is partially complementary. In the absence of Hg(II), the FAM-labeled hairpin (signal probe, SP) is adsorbed onto the surface of GO via π-stacking interactions. CP blocks the release of the HP for binding to SP. This results in quenching of the green fluorescence of the label. Upon addition of Hg(II), the linear structure of CP is converted to a hairpin structure due to the formation of thymidine-Hg(II)-thymidine duplexes. HP is released from the CP/HP hybrids, and this causes SP to be released from from GO and fluorescence to be recovered. The signal is strongly amplified by using Exo III-assisted targeting and recycling of HP. Hence, Hg(II) can be detected via the strong increase in fluorescence. The method has a linear response in the 0.1 to 30 nM Hg(II) concentration range and a 10 pM detection limit. It was applied to the determination of Hg(II) in three (spiked) Chinese medicines. Graphical abstract Schematic representation of fluorescence sensing strategy for Hg2+ by using graphene oxide as a quencher and exonuclease III-assisted signal amplification.

Ultrasensitive sensing platform for platelet-derived growth factor BB detection based on layered molybdenum selenide-graphene composites and Exonuclease III assisted signal amplification.

A highly sensitive and ultrasensitive electrochemical aptasensor for platelet-derived growth factor BB (PDGF-BB) detection is fabricated based on layered molybdenum selenide-graphene (MoSe2-Gr) composites and Exonuclease III (Exo III)-aided signal amplification. MoSe2-Gr is prepared by a simple hydrothermal method and used as a promising sensing platform. Exo III has a specifical exo-deoxyribonuclease activity for duplex DNAs in the direction from 3' to 5' terminus, however its activity is limited on the duplex DNAs with more than 4 mismatched terminal bases at 3' ends. Herein, aptamer and complementary DNA (cDNA) sequences are designed with four thymine bases on 3' ends. In the presence of target protein, the aptamer associates with it and facilitates the formation of duplex DNA between cDNA and signal DNA. The duplex DNA then is digested by Exo III and releases cDNA, which hybridizes with signal DNA to perform a new cleavage process. Nevertheless, in the absence of target protein, the aptamer hybridizes with cDNA will inhibit the Exo III-assisted nucleotides cleavage. The signal DNA then hybridizes with capture DNA on the electrode. Subsequently, horse radish peroxidase is fixed on electrode by avidin-biotin reaction and then catalyzes hydrogen peroxide and hydroquinone to produce electrochemical response. Therefore, a bridge can be established between the concentration of target protein and the degree of the attenuation of the obtained signal, providing a quantitative measure of target protein with a broad detection range of 0.0001-1 nM and a detection limit of 20 fM.

Non-nucleosidic inhibition of Herpes simplex virus DNA polymerase: mechanistic insights into the anti-herpetic mode of action of herbal drug withaferin A.

BACKGROUND: Herpes Simplex Virus 1 and 2 causes several infections in humans including cold sores and encephalitis. Previous antiviral studies on herpes viruses have focussed on developing nucleoside analogues that can inhibit viral polymerase and terminate the replicating viral DNA. However, these drugs bear an intrinsic non-specificity as they can also inhibit cellular polymerase apart from the viral one. The present study is an attempt to elucidate the action mechanism of naturally occurring withaferin A in inhibiting viral DNA polymerase, thus providing an evidence for its development as a novel anti-herpetic drug. RESULTS: Withaferin A was found to bind very similarly to that of the previously reported 4-oxo-DHQ inhibitor. Withaferin A was observed binding to the residues Gln 617, Gln 618, Asn 815 and Tyr 818, all of which are crucial to the proper functioning of the polymerase. A comparison of the conformation obtained from docking and the molecular dynamics simulations shows that substantial changes in the binding conformations have occurred. These results indicate that the initial receptor-ligand interaction observed after docking can be limited due to the receptor rigid docking algorithm and that the conformations and interactions observed after simulation runs are more energetically favoured. CONCLUSIONS: We have performed docking and molecular dynamics simulation studies to elucidate the binding mechanism of prospective herbal drug withaferin A onto the structure of DNA polymerase of Herpes simplex virus. Our docking simulations results give high binding affinity of the ligand to the receptor. Long de novo MD simulations for 10 ns performed allowed us to evaluate the dynamic behaviour of the system studied and corroborate the docking results, as well as identify key residues in the enzyme-inhibitor interactions. The present MD simulations support the hypothesis that withaferin A is a potential ligand to target/inhibit DNA polymerase of the Herpes simplex virus. Results of these studies will also guide the design of selective inhibitors of DNA POL with high specificity and potent activity in order to strengthen the therapeutic arsenal available today against the dangerous biological warfare agent represented by Herpes Simplex Virus.

Quantitative analysis of a RNA-cleaving DNA catalyst obtained via in vitro selection.

In vitro selections performed in the presence of Mg(2+) generated DNA sequences capable of cleaving an internal ribonucleoside linkage. Several of these, surprisingly, displayed intermolecular catalysis and catalysis independent of Mg(2+), features that the selection protocol was not explicitly designed to select. A detailed physical organic analysis was applied to one of these DNAzymes, termed 614. First, the progress curve for the reaction was dissected to identify factors that prevented the molecule from displaying clean first-order transformation kinetics and 100% conversion. Several factors were identified and quantitated, including (a) competitive intra- and intermolecular rate processes, (b) alternative reactive and unreactive conformations, and (c) mutations within the catalyst. Other factors were excluded, including "approach to equilibrium" kinetics and product inhibition. The possibility of complementary strand inhibition was demonstrated but was shown to not be a factor under the conditions of these experiments. The rates of the intra- and intermolecular processes were compared, and saturation models for the intermolecular process were built. The rate-limiting step for the intermolecular reaction was found to be the association/folding of the enzyme with the substrate and not the cleavage step. The DNAzyme 614 is more active in trans than in cis and more active at temperatures below the selection temperature than at the selection temperature. Many of these properties have not been reported in similar systems; these results therefore expand the phenomenology known for this class of DNA-based catalysts. A brief survey of other catalysts arising from this selection found other Mg(2+)-independent DNAzymes and provided a preliminary view of the ruggedness of the landscape, relating function to structure in sequence space. Hypotheses are suggested to account for the fact that a selection in the presence of Mg(2+) did not exploit this Mg(2+). This study of a specific catalytically active DNAzyme is an example of studies that will be necessary generally to permit in vitro selection to help us understand the distribution of function in sequence space.

DNA strand transfer catalyzed by the 5'-3' exonuclease domain of Escherichia coli DNA polymerase I.

A protein which promotes DNA strand transfer between linear double-stranded M13mp19 DNA and single-stranded viral M13mp19 DNA has been isolated from recA- E.coli. The protein is DNA polymerase I. Strand transfer activity residues in the small fragment encoding the 5'-3' exonuclease and can be detected using a recombinant protein comprising the first 324 amino acids encoded by polA. Either the recombinant 5'-3' exonuclease or intact DNA polymerase I can catalyze joint molecule formation, in reactions requiring only Mg2+ and homologous DNA substrates. Both kinds of reactions are unaffected by added ATP. Electron microscopy shows that the joint molecules formed in these reactions bear displaced single strands and therefore this reaction is not simply promoted by annealing of exonuclease-gapped molecules. The pairing reaction is also polar and displaces the 5'-end of the non-complementary strand, extending the heteroduplex joint in a 5'-3' direction relative to the displaced strand. Thus strand transfer occurs with the same polarity as nick translation. These results show that E.coli, like many eukaryotes, possesses a protein which can promote ATP-independent strand-transfer reactions and raises questions concerning the possible biological role of this function.