Iodide modulates protein damage induced by the inflammation-associated heme enzyme myeloperoxidase.

Iodide ions (I-) are an essential dietary mineral, and crucial for mental and physical development, fertility and thyroid function. I- is also a high affinity substrate for the heme enzyme myeloperoxidase (MPO), which is involved in bacterial cell killing during the immune response, and also host tissue damage during inflammation. In the presence of H2O2 and Cl-, MPO generates the powerful oxidant hypochlorous acid (HOCl), with excessive formation of this species linked to multiple inflammatory diseases. In this study, we have examined the hypothesis that elevated levels of I- would decrease HOCl formation and thereby protein damage induced by a MPO/Cl-/H2O2 system, by acting as a competitive substrate. The presence of increasing I- concentrations (0.1-10 µM; i.e. within the range readily achievable by oral supplementation in humans), decreased damage to both model proteins and extracellular matrix components as assessed by gross structural changes (SDS-PAGE), antibody recognition of parent and modified protein epitopes (ELISA), and quantification of both parent amino acid loss (UPLC) and formation of the HOCl-biomarker 3-chlorotyrosine (LC-MS) (reduced by ca. 50% at 10 µM I-). Elevated levels of I- ( > 1 µM) also protected against functional changes as assessed by a decreased loss of adhesion (eg. 40% vs. < 22% with >1 µM I-) of primary human coronary artery endothelial cells (HCAECs), to MPO-modified human plasma fibronectin. These data indicate that low micromolar concentrations of I-, which can be readily achieved in humans and are readily tolerated, may afford protection against cell and tissue damage induced by MPO.

Fibronectin adsorption on osteoconductive hydroxyapatite and non-osteoconductive α-alumina.

The osteoconductivity mechanism of hydroxyapatite (HAp) has not been elucidated. It is hypothesized that specific proteins adsorb on HAp, promoting its osteoconductivity. To verify this hypothesis, we compared the adsorption behavior of fibronectin (Fn) on HAp powder and on α-alumina (α-Al2O3) powder, a material with no osteoconductivity. More Fn adsorbed on α-Al2O3 than on HAp, irrespective of the Fn concentration, and there was no significant difference in the secondary structure of Fn adsorbed on HAp and α-Al2O3. Further, it is possible that Fn did not adsorb on HAp and α-Al2O3 through the Arg-Gry-Asp motif of Fn. The amount of Fn adsorbed on HAp oriented to the a(b)-axis with very little decrease in carbonate and the adsorbed Fn had a smaller α-helix structure content. The results suggest that the secondary and/or higher-order structure rather than the amount of adsorbed Fn might affect the osteoconductivity of HAp, which might be electrostatically controlled by the crystal face orientation and/or carbonate content of HAp, although this should be confirmed by a cell culture test in the future.

Whole-cell biosensor for label-free detection of GPCR-mediated drug responses in personal cell lines.

Deciphering how genetic variation in drug targets such as G protein-coupled receptors (GPCRs) affects drug response is essential for precision medicine. GPCR signaling is traditionally investigated in artificial cell lines which do not provide sufficient physiological context. Patient-derived cell lines such as lymphoblastoid cell lines (LCLs) could represent the ideal cellular model system. Here we describe a novel label-free, whole-cell biosensor method for characterizing GPCR-mediated drug responses in LCLs. Generally, such biosensor technology is deemed only compatible with adherent cell lines. We optimized and applied the methodology to study cellular adhesion properties as well as GPCR drug responses in LCLs, which are suspension cells. Coating the detector surface with the extracellular matrix protein fibronectin resulted in cell adherence and allowed detection of cellular responses. A prototypical GPCR present on these cells, i.e. the cannabinoid receptor 2 (CB2), was selected for pharmacological characterization. Receptor activation with the agonist JWH133, blockade by antagonist AM630 as well as downstream signaling inhibition by PTX could be monitored sensitively and receptor-specifically. Potencies and effects were comparable between LCLs of two genetically unrelated individuals, providing the proof-of-principle that this biosensor technology can be applied to LCLs, despite their suspension cell nature, in order to serve as an in vitro model system for the evaluation of individual genetic influences on GPCR-mediated drug responses.

On the potential for fibronectin/phosphorylcholine coatings on PTFE substrates to jointly modulate endothelial cell adhesion and hemocompatibility properties.

The use of biomolecules as coatings on biomaterials is recognized to constitute a promising approach to modulate the biological response of the host. In this work, we propose a coating composed by 2 biomolecules susceptible to provide complementary properties for cardiovascular applications: fibronectin (FN) to enhance endothelialization, and phosphorylcholine (PRC) for its non thrombogenic properties. Polytetrafluoroethylene (PTFE) was selected as model substrate mainly because it is largely used in cardiovascular applications. Two approaches were investigated: 1) a sequential adsorption of the 2 biomolecules and 2) an adsorption of the protein followed by the grafting of phosphorylcholine via chemical activation. All coatings were characterized by immunofluorescence staining, X-Ray Photoelectron Spectroscopy and Scanning Electron Microscopy analyses. Assays with endothelial cells showed improvement on cell adhesion, spreading and metabolic activity on FN-PRC coatings compared with the uncoated PTFE. Platelets adhesion and activation were both reduced on the coated surfaces when compared with uncoated PTFE. Moreover, clotting time tests exhibited better hemocompatibility properties of the surfaces after a sequential adsorption of FN and PRC. In conclusion, FN-PRC coating improves cell adhesion and non-thrombogenic properties, thus revealing a certain potential for the development of this combined deposition strategy in cardiovascular applications.

Lysophosphatidic acid enhances collagen deposition and matrix thickening in engineered tissue.

The time needed to produce engineered tissue is critical. A self-assembly approach provided excellent results regarding biological functions and cell differentiation because it closely respected the microenvironment of cells. Nevertheless, the technique was time consuming for producing tissue equivalents with enough extracellular matrix to allow manipulations. Unlike L-arginine supplementation that only increased accumulation of collagen in cell culture supernatant in our model, addition of lysophosphatidic acid, a natural bioactive lipid, did not modify the amount of accumulated collagen in the cell culture supernatant; however, it enhanced the matrix deposition rate without inducing fibroblast hyperproliferation and tissue fibrosis.

3D discrete angiogenesis dynamic model and stochastic simulation for the assessment of blood perfusion coefficient and impact on heat transfer between nanoparticles and malignant tumors.

Early detection of malignant tumors plays a crucial role in the survivability chances of the patient. Therefore, new and innovative tumor detection methods are constantly searched for. Tumor-specific magnetic-core nano-particles can be used with an alternating magnetic field to detect and treat tumors by hyperthermia. For the analysis of the method effectiveness, the bio-heat transfer between the nanoparticles and the tissue must be carefully studied. Heat diffusion in biological tissue is usually analyzed using the Pennes Bio-Heat Equation, where blood perfusion plays an important role. Malignant tumors are known to initiate an angiogenesis process, where endothelial cell migration from neighboring vasculature eventually leads to the formation of a thick blood capillary network around them. This process allows the tumor to receive its extensive nutrition demands and evolve into a more progressive and potentially fatal tumor. In order to assess the effect of angiogenesis on the bio-heat transfer problem, we have developed a discrete stochastic 3D model & simulation of tumor-induced angiogenesis. The model elaborates other angiogenesis models by providing high resolution 3D stochastic simulation, capturing of fine angiogenesis morphological features, effects of dynamic sprout thickness functions, and stochastic parent vessel generator. We show that the angiogenesis realizations produced are well suited for numerical bio-heat transfer analysis. Statistical study on the angiogenesis characteristics was derived using Monte Carlo simulations. According to the statistical analysis, we provide analytical expression for the blood perfusion coefficient in the Pennes equation, as a function of several parameters. This updated form of the Pennes equation could be used for numerical and analytical analyses of the proposed detection and treatment method.

Fibronectin-Alginate microcapsules improve cell viability and protein secretion of encapsulated Factor IX-engineered human mesenchymal stromal cells.

Continuous delivery of proteins by engineered cells encapsu-lated in biocompatible polymeric microcapsules is of considerable therapeutic potential. However, this technology has not lived up to expectations due to inadequate cell--matrix interactions and subsequent cell death. In this study we hypoth-esize that the presence of fibronectin in an alginate matrix may enhance the viability and functionality of encapsulated human cord blood-derived mesenchymal stromal cells (MSCs) expressing the human Factor IX (FIX) gene. MSCs were encapsulated in alginate-PLL microcapsules containing 10, 100, or 500 µg/ml fibronectin to ameliorate cell survival. MSCs in microcapsules with 100 and 500 µg/ml fibronectin demonstrated improved cell viability and proliferation and higher FIX secretion compared to MSCs in non-supplemented microcapsules. In contrast, 10 µg/ml fibronectin did not significantly affect the viability and protein secretion from the encapsulated cells. Differentiation studies demonstrated osteogenic (but not chondrogenic or adipogenic) differentiation capability and efficient FIX secretion of the enclosed MSCs in the fibronectin-alginate suspension culture. Thus, the use of recombinant MSCs encapsulated in fibronectin-alginate microcapsules in basal or osteogenic cultures may be of practical use in the treatment of hemophilia B.

Leonurus cardiaca L. herb--a derived extract and an ursolic acid as the factors affecting the adhesion capacity of Staphylococcus aureus in the context of infective endocarditis.

The objective was an assessment of the impact of Leonurus cardiaca L. extract (LCE) and ursolic acid (UA) on the adhesive properties of Staphylococus aureus NCTC 8325 strain, expressing virulence factors important in the pathogenesis of infective endocarditis. The adhesion and biofilm formation of bacteria cultured in the presence of subinhibitory concentrations of LCE or UA on the abiotic surface or covered with fibrinogen, fibronectin or collagen, were evaluated. Inhibitory effects of LCE and UA on staphylococcal adherence to both types of surface were demonstrated. This, in the case of UA, resulted in a significant reduction of biofilm formation.

Effects of areca nut extract on lipopolysaccharides-enhanced adhesion and migration of human mononuclear leukocytes.

BACKGROUND: Areca chewers have a higher prevalence of periodontitis than non-chewers. Cell adhesion and movement (migration) are important for leukocyte recruitment to inflammation sites. This study investigates the effects of areca nut extract (ANE) on the adhesion and migration abilities of the human immune cells, peripheral blood mononuclear cells (PBMCs). The combined effects of nicotine and lipopolysaccharides (LPS) were also analyzed. METHODS: Purified PBMCs obtained from healthy adults were treated with ANE, nicotine, and/or LPS. Cell adhesion ability was examined using fibronectin-coated microslides, Liu stain, and light microscopy. Cell migration ability was evaluated using the transwell system followed by staining and fluorescence microscopy. Statistical difference was analyzed using the Mann-Whitney U test. RESULTS: When compared with the media-treated control samples, PBMCs treated with ANE for 4 hours showed a significant reduction of the adherent cells on the microslides. Interestingly, LPS treatment increased cell adhesion, which could be reduced by simultaneous ANE plus nicotine treatment. The chemotactic migration of PBMCs was reduced by ANE treatment for 1, 4, or 24 hours in a dose-dependent manner. LPS treatment increased PBMC migration, which could be reduced by simultaneous treatment with ANE or with ANE plus nicotine. CONCLUSIONS: ANE reduced the adhesion and migration abilities of PBMC. ANEs, with or without nicotine, also attenuated the migration of LPS-stimulated PBMCs. The results implicated that the immune cell functions were impaired in areca chewers, which might increase the host susceptibility to oral and periodontal infection.

Leaders in cell adhesion: an interview with Richard Hynes, pioneer of cell-matrix interactions. Interview by Pamela Cowin.

On a recent visit Richard O Hynes, FRS, HHMI, Daniel K. Ludwig Professor for Cancer Research at the Koch Institute for Integrative Cancer Research, MIT, graciously agreed to be interviewed in person for the first in Cell Communication and Adhesion's series on "Leaders in Cell Adhesion". In this interview we discussed three things: 1) the early role of family, mentors, and luck on his career path; 2) his major discoveries of fibronectin, integrins and the evolution of extracellular matrix proteins; and 3) his role in, and thoughts on, current science policy. This interview reveals his characteristic calmness and infectious optimism, his spontaneous and down to earth sense of humor, and his great ability to place scientific questions in perspective. The interview, carried out on April 30(th) 2013 is reported here verbatim with only minor editing for clarity.

Molecular simulation of fibronectin adsorption onto polyurethane surfaces.

Poly(ethylene glycol)-based polyurethanes have been widely used in biomedical applications; however, they are prone to swelling. A natural polyol, castor oil, can be incorporated into these polyurethanes to control the degree of the swelling, which alters mechanical properties and protein adsorption characteristic of the polymers. In this work, we modeled poly(ethylene glycol) and castor oil copolymers of hexamethylene diisocyanate-based polyurethanes (PEG-HDI and CO-HDI, respectively) and compared their mechanisms for fibronectin adsorption using molecular mechanics and molecular dynamics simulations. Results showed that the interplay between the hydrophobic residues concentrated at the N-terminal end of the protein, the surface roughness, and the hydrophilicity of the polymer surface determine the overall protein adsorption affinity. Incorporating explicit water molecules in the simulations results in higher affinity for fibronectin adsorption to more hydrophobic surface of CO-HDI surfaces, emphasizing the role that water molecules play during adsorption. We also observed that the strain energies that are indicative of flexibility and consequently entropy are significantly affected by the changes in the patterns of ß-sheet formation/breaking. Our study lends supports to the view that while castor oil controls the degree of swelling, it increases the adsorption of fibronectin to a limited extent due to the interplay between its hydrophobicity and its surface roughness, which needs to be taken into account during the design of polyurethane-based biomaterials.

BMP-2 and ALP gene expression induced by a BMP-2 gene-fibronectin-apatite composite layer.

The bone morphogenetic protein 2 (BMP-2) gene delivery system with a gene-fibronectin (Fn)-apatite composite layer was fabricated on the surface of a hydroxyapatite ceramic scaffold. The BMP-2 gene-Fn-apatite composite layer was coated on the scaffold using a supersaturated calcium phosphate solution supplemented with BMP-2 DNA and Fn. The scaffolds were ectopically implanted into the dorsal subcutaneous tissue of rats. Four weeks after the implantation, the hydroxyapatite scaffold coated with the BMP-2 gene-Fn-apatite composite layer showed improved gene expressions of BMP-2 and alkaline phosphatase as compared with the scaffold coated with the apatite layer. Although these results suggest the possibility of ectopic bone formation induced by the present gene delivery system, further study is necessary to prove this.

High-throughput 3-D cell-based proliferation and cytotoxicity assays for drug screening and bioprocess development.

We have designed, built and tested a three-dimensional (3-D) cell culture system on modified microplates for high-throughput, real-time, proliferation and cytotoxicity assays. In this 3-D culture system, cells expressing the enhanced green fluorescent protein (EGFP) were cultured in nonwoven polyethylene terephthalate (PET) fibrous scaffolds. Compared to 2-D cultures in conventional microplates, 3-D cultures gave more than 10-fold higher fluorescence signals with significantly increased signal-to-noise ratio (SNR), thus extending the application of conventional fluorescence microplate readers for online monitoring of culture fluorescence. The 3-D system was successfully used to demonstrate the effects of fetal bovine serum, fibronectin coating of PET fibers, and cytotoxicity of dexamethasone on recombinant murine embryonic stem D3 cells. The dosage effects of 5-fluorouracil and gemcitabine on high-density colon cancer HT-29 cells were also tested. These studies demonstrated that the 3-D culture microplate system with EGFP expressing cells can be used as a high-throughput system in drug discovery and bioprocess development.

In situ roughening of polymeric microstructures.

A method to perform in situ roughening of arrays of microstructures weakly adherent to an underlying substrate was presented. SU8, 1002F, and polydimethylsiloxane (PDMS) microstructures were roughened by polishing with a particle slurry. The roughness and the percentage of dislodged or damaged microstructures was evaluated as a function of the roughening time for both SU8 and 1002F structures. A maximal RMS roughness of 7-18 nm for the surfaces was obtained within 15-30 s of polishing with the slurry. This represented a 4-9 fold increase in surface roughness relative to that of the native surface. Less than 0.8% of the microstructures on the array were removed or damaged after 5 min of polishing. Native and roughened arrays were assessed for their ability to support fibronectin adhesion and cell attachment and growth. The quantity of adherent fibronectin was increased on roughened arrays by two-fold over that on native arrays. Cell adhesion to the roughened surfaces was also increased compared to native surfaces. Surface roughening with the particle slurry also improved the ability to stamp molecules onto the substrate during microcontact printing. Roughening both the PDMS stamp and substrate resulted in up to a 20-fold improvement in the transfer of BSA-Alexa Fluor 647 from the stamp to the substrate. Thus roughening of micrometer-scale surfaces with a particle slurry increased the adhesion of biomolecules as well as cells to microstructures with little to no damage to largescale arrays of the structures.

Fibronectin adsorption studied using neutron reflectometry and complementary techniques.

In implantology it is known that fibronectin affects cell-substrate adhesion, consequently, the structure and composition of the initially adsorbed fibronectin layer to a large extent determines the biological response to a biomaterial implanted into the body. In this study we have used neutron reflectometry and quartz-crystal microbalance with dissipation to investigate the amount of fibronectin adsorbed, the layer density, thickness and structure of films adsorbed to polished silicon oxide surfaces. We have cultured MG63 osteoblast-like cells on surfaces coated and uncoated with fibronectin and monitored the cellular response to these surfaces. The results show that at fibronectin concentrations in the range 0.01 to 0.1 mg/ml a single highly hydrated layer of fibronectin approximately 40-50 Å in thickness adsorbs to a polished silicon oxide surface and is likely to correspond to one diffuse monolayer of fibronectin arranged side-on. Cells cultured on this fibronectin layer have dramatically different morphology and growth to those grown on bare surfaces. Using a model silicon oxide surface has enabled us to study the substrate/protein interface, together with the impact of a fibronectin layer on the cellular response using consistent experimental conditions across a unique set of experimental techniques.

Retronectin enhances lentivirus-mediated gene delivery into hematopoietic progenitor cells.

Genetic modification of hematopoietic stem cells holds great promise in the treatment of hematopoietic disorders. However, clinical application of gene delivery has been limited, in part, by low gene transfer efficiency. To overcome this problem, we investigated the effect of retronectin (RN) on lentiviral-mediated gene delivery into hematopoietic progenitor cells (HPCs) derived from bone marrow both in vitro and in vivo. RN has been shown to enhance transduction by promoting colocalization of lentivirus and target cells. We found that RN enhanced lentiviral transfer of the VENUS transgene into cultured c-Kit(+) Lin(-) HPCs. As a complementary approach, in vivo gene delivery was performed by subjecting mice to intra-bone marrow injection of lentivirus or a mixture of RN and lentivirus. We found that co-injection with RN increased the number of VENUS-expressing c-Kit(+) Lin(-) HPCs in bone marrow by 2-fold. Further analysis of VENUS expression in colony-forming cells from the bone marrow of these animals revealed that RN increased gene delivery among these cells by 4-fold. In conclusion, RN is effective in enhancing lentivirus-mediated gene delivery into HPCs.

Effect of chemically modified titanium surfaces on protein adsorption and osteoblast precursor cell behavior.

PURPOSE: To investigate the effects of different chemically modified titanium surfaces on protein adsorption and the osteoblastic differentiation of human embryonic palatal mesenchymal (HEPM) cells. MATERIALS AND METHODS: Three different surfaces were evaluated. The first, a machined surface (Ti-M), was considered a control. The second surface was acid etched (Ti-AE). The third surface was prepared by exposing the Ti-AE samples to sodium hydroxide (NaOH) solution (Ti-AAE). The surface characteristics of chemically modified titanium were investigated by means of scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and profilometry. To evaluate the production of biomarkers, commercial kits were utilized. RESULTS: Surface composition and morphology affected the kinetics of protein adsorption. Ti-AE surfaces manifested a greater affinity for fibronectin adsorption compared to Ti-M or Ti-AAE surfaces. It was observed that Ti-AE and Ti-AAE surfaces promoted significantly greater cell attachment compared to Ti-M surfaces. Statistically significant differences were also observed in the expression of alkaline phosphatase (ALP) activity, osteocalcin, and osteopontin on all 3 titanium surfaces. ALP activity and osteocalcin production up to day 12 suggested that differentiation of the cells into osteoblasts had occurred and that cells were expressing a bone-forming phenotype. CONCLUSIONS: It was thus concluded from this study that surface morphology and composition play a critical role in enhancing HEPM cell proliferation and differentiation into osteoblast cells.

Monoclonal antibody production using a new supermacroporous cryogel bioreactor.

A supermacroporous cryogel bioreactor has been developed to culture hybridoma cells for long-term continuous production of monoclonal antibodies (mAb). Hybridoma clone M2139, secreting antibodies against J1 epitope (GERGAAGIAGPK; amino acids, 551-564) of collagen type II, are immobilized in the porous bed matrix of a cryogel column (10 mL bed volume). The cells got attached to the matrix within 48 h after inoculation and grew as a confluent sheet inside the cryogel matrix. Cells were in the lag phase for 15 days and secreted mAb into the circulation medium. Glucose consumption and lactic acid production were also monitored, and during the exponential phase (approximately 20 days), the hybridoma cell line consumed 0.75 mM day-1 glucose, produced 2.48 mM day-1 lactic acid, and produced 6.5 microg mL-1 day-1 mAb during the exponential phase. The mAb concentration reached 130 microg mL-1 after continuous run of the cryogel column for 36 days. The yield of the mAb after purification was 67.5 mg L-1, which was three times greater than the mAb yield obtained from T-flask batch cultivation. Even after the exchange of medium reservoir, cells in the cryogel column were still active and had relatively stable mAb production for an extended period of time. The bioreactor was operated continuously for 55 days without any contamination. The results from ELISA as well as arthritis experiments demonstrate that the antibodies secreted by cells grown on the cryogel column did not differ from antibodies purified from the cells grown in commercial CL-1000 culture flasks. Thus, supermacroporous cryogels can be useful as a supporting material for productive hybridoma cell culture. Cells were found to be viable inside the porous matrix of the cryogel during the study period and secreted antibodies continuously. The antibodies thus obtained from the cryogel reactor were found to be functionally active in vivo, as demonstrated by their capacity to induce arthritis in mice.

Effects of gel concentration, human fibronectin, and cation supplement on the tissue-engineered cartilage.

Cultivation of bovine knee chondrocytes (BKCs) in various cationic additives was studied using chitosan-gelatin scaffolds, whose surfaces were modified by human fibronectin (HFN). Here, the genipin-crosslinked scaffolds were fabricated by the freezing/lyophilization method with various concentrations of the precursory gels. The experimental results indicated that a lower freezing temperature led to higher moisture content, porosity, and specific surface area of a scaffold. The higher the precursor concentration, the larger the moisture content of a scaffold. A fast biodegradation of scaffold matrix was generated by a high porosity with BKCs. A higher concentration of HFN coated on scaffold surfaces yielded a faster rate of BKC attachment from the culture medium. The amounts of BKCs, glycosaminoglycans, and collagen over 28-day cultivation increased with the scaffold porosity, the coating concentration of HFN, the seeding density of BKCs, and the calcium concentration in medium.

Fibronectin-calcium phosphate composite layer on hydroxyapatite to enhance adhesion, cell spread and osteogenic differentiation of human mesenchymal stem cells in vitro.

Fibronectin (Fn) and type I collagen (Col) were immobilized on a surface of a hydroxyapatite (HAP) ceramic by coprecipitation with calcium phosphate in a supersaturated calcium phosphate solution prepared by mixing clinically approved infusion fluids. These proteins and the calcium phosphate precipitate formed a composite surface layer. As a result, the proteins were immobilized firmly as not to be released completely for 3 d in a physiological salt solution. When human mesenchymal stem cells (hMSCs) were cultured on a HAP ceramic in a differentiation medium supplemented with dexamethasone, beta-glycerophosphate and ascorbic acid, hMSCs spread well within 1 h. The alkaline phosphatase (ALP) activity of hMSCs cultured on the Fn-calcium phosphate composite layer significantly increased compared with that of hMSCs cultured on the untreated HAP ceramic. On the other hand, Col did not increase the ALP activity of hMSCs and no synergy between Fn and Col was observed. Therefore, the Fn-calcium phosphate composite layer formed on the HAP is useful for the enhancement of the spreading and osteogenic differentiation of hMSCs in vitro.