Persimmon preservation using edible coating of chitosan enriched with ginger oil and visualization of internal structure changes using X-ray computed tomography.

The incorporation of ginger oil (GO) influenced the physical, optical, and structural properties of the chitosan (CH) film including the decreases of moisture content (60.15 %), water solubility (35.37 %) and water vapor permeability (WVP) (32.79 %) and the increases of tensile strength (TS) (125 %), elongation at break (EAB) (2.74 %) and opacity (131.08 %). Antifungal capacity of the CH film was enhanced when GO was added to the film. The CH + GO film showed a less homogeneous surface that the presence of the oil droplets on the film surface. Moreover, the CH and CH + GO coatings reduced weight loss of persimmon by 14.87 %, and 21.13 %, respectively, compared to the control. Moisture content loss of the coated CH- and the coated CH + GO- persimmons was decreased by 1.94 % and 4.92 %, respectively, compared to that of the control persimmon. Furthermore, the CH and CH + GO coatings decreased in color changes, respiration rate, ethylene production, changes in pH and TSS, and remained firmness of persimmon during storage at 25 °C. In addition, X-ray CT images can be used to monitor internal changes and observe the tissue breakdown during storage period. The ΔGS value can be used as a predictor of persimmon internal qualities. Thus, the CH film containing GO can be applied as an active packaging material.

"Development and characterization of edible films based on starch isolated from different Colombian potato varieties".

This work reports on the extraction and characterization of the behavior of starch from residues of several potato varieties (Criolla, Sabanera and Pastusa) of Colombian origin from the Andean region using different techniques and the evaluation of the effect of citric acid (CA) on the grain morphology. Additionally, films were produced with each one of the extracted starches and glycerol. Pastusa variety starch shows a higher granule size than the other varieties and Pastusa starch shows lower amylose content compared to Sabanera and Criolla. Criolla and Pastusa starches exhibit more thermal stability than Sabanera starch. Starch-glycerol films were also produced using the cast solving method. The films were mechanically analyzed by tensile test and the barrier properties were assessed by water vapor permeability (WVP). The tensile strength of the films varied in the 2.0-2.4 MPa range, while the elongation at break was comprised between 25 and 32 %. With regard to water vapor permeability, the obtained values fall within the 4-7 × 10-10 g m-1 s-1 Pa-1 range. It was observed that the thickness of the films and the protein content affected water vapor permeability, increasing this value at higher levels of thickness.

Synthesis and characterization of polysaccharide- and protein-based edible films and application as packaging materials for fresh fish fillets.

The rising packaging industry together with global demand for sustainable production has increased the interest in developing biodegradable packaging materials. The aim of the study was to develop edible films based on pectin, gelatin, and hydroxypropyl methylcellulose and evaluate their applicability as biodegradable packaging materials for gilthead seabream fillets. Mechanical properties, water barriers, wettability of the films through contact angle measurement, optical, and UV-Vis barrier properties were evaluated for food packaging applications. The effective blend of polysaccharide and protein film-forming solutions was confirmed by the produced films with excellent optical properties, acceptable mechanical properties and adequate barriers to water vapor. The contact angle for pectin based and gelatin based films were higher than 90° indicating the hydrophobic films, while HPMC based films had contact angle lower than 90°. The produced films were tested as alternative and environmentally friendly packaging materials for gilthead seabream fillets during refrigerated storage. All tested packaging conditions resulted in similar shelf-life in packed gilthead seabream fillets (i.e. 7-8 days at 2 °C). The results showed that the developed films may reduce the use of conventional petroleum-based food packaging materials without affecting the shelf-life of fish.

Effect of edible coatings and films enriched with plant extracts and essential oils on the preservation of animal-derived foods.

Edible coatings and films for food preservation are becoming more popular thanks to their environmentally friendly properties and active ingredient-carrying ability. Their application can be effective in contrasting quality decay by limiting oxidation and deterioration of foods. Many reviews analyze the different compounds with which films and coatings can be created, their characteristics, and the effect when applied to food. However, the possibility of adding plant extracts and essential oils in edible coatings and films to preserve processed animal-derived products has been not exhaustively explored. The aim of this review is to summarize how edible coatings and films enriched with plant extracts (EXs) and essential oils (EOs) influence the physico-chemical and sensory features as well as the shelf-life of cheese, and processed meat and fish. Different studies showed that various EXs and EOs limited both oxidation and microbial growth after processing and during food preservation. Moreover, encapsulation has been found to be a valid technology to improve the solubility and stability of EOs and EXs, limiting strong flavor, controlling the release of bioactive compounds, and maintaining their stability during storage. Overall, the incorporation of EXs and EOs in edible coating and film to preserve processed foods can offer benefits for improving the shelf-life, limiting food losses, and creating a food sustainable chain.

Eco-safe composite edible coating of hydrocolloids with papaya leaf extract improves postharvest quality and shelf life of papaya fruit under ambient storage.

Papaya postharvest management using low-temperature storage is discouraged as it is a tropical fruit. Extensive research is going on to preserve papaya quality at ambient storage using edible coatings and its composites. The present investigation examined the effects of an eco-safe composite edible coating consisting of hydrocolloid carboxymethyl cellulose (CMC) (1%), guar gum (1.5%), xanthan gum (0.3%), and Gum Arabic (10%) combined with papaya leaf extract (PLE) (1:1 ratio by volume) applied as dip treatment on "Red Lady" papaya fruit at ambient storage condition. Among all the attempted treatments, "PLE incorporated with CMC (1%)" was found to be the best, as the treated fruit exhibited the highest levels of biochemicals, whereas the lowest levels of physiological and enzymatic activity, which positively affected the shelf life. The "CMC + PLE" treatment enhanced the fruit gloss score by 70.1%, phenolics by 6.1%, ascorbic acid by 22.3%, total carotenoid content by 7.4%, and fruit predilection score by 22.0% over the control fruit. However, it lowered (controlling) the physiological loss in weight by 51.0%, decay incidence by 66.6%, and polygalacturonase and pectin methylesterase activity by 24.92% and 35.29%, respectively, over control. Moreover, this treatment exhibited the highest fruit purchase predilection score and prolonged the storage life for >3 days on the physiological loss standard basis (≤10%). This study indicates that "CMC (1%) with PLE (1:1)" composite coating application on papaya under ambient conditions might be an effective, environmentally friendly, and health-friendly way to retain the quality and extend the storage life.

Development of novel carboxymethyl cellulose/gelatin-based edible films with pomegranate peel extract as antibacterial/antioxidant agents for beef preservation.

Novel antioxidant and antibacterial composite films were fabricated by incorporating pomegranate peel extract (PPE) into gelatin and carboxymethyl cellulose matrices. Increasing PPE concentration significantly (p < 0.05) altered physical properties and improved UV (decrease in light transmission 87.30 % to 9.89 % at 400 nm) and water resistance, while FTIR and molecular docking results revealed hydrogen bonding between PPE and film matrix. PPE incorporation enhanced antioxidant activity up to 84.15 ± 0.12 % and also restricted gram-positive and gram-negative bacterial growth by 72.4 % and 65.9 % respectively after 24 h, measured by antimicrobial absorption assays. For beef packaging applications at refrigeration temperatures, PPE films were most effective at extending shelf-life up to 3 days, as evidenced by reduced total viable counts, total volatile basic nitrogen, weight loss, and pH changes compared to control films. Therefore, these antioxidant and antibacterial films have potential applications in food packaging to protect against mechanical stress, light exposure, microbial spoilage, and oxidative free radicals.

Antimicrobial and biocompatibility nature of methanol extract of Lannea coromandelica bark and edible coating film preparation for fruit preservation.

This research was performed to evaluate the antimicrobial activity of methanol extract of Lannea coromandelica bark against fruit damage causing microbes such as fungi: Alternaria sp., Aspergillus sp., Botrytis sp., Cladosporium sp., Fusarium sp., Penicillium sp., Phytophthora sp., and Trichoderma sp. The bacteria: such as Chromobacter sp., Enterobacter sp., Erwinia sp., Flavobacterium sp., Lactobacillus sp., Pseudomonas sp., and Xanthomonas sp. was investigated. Furthermore, their biocompatibility nature was determined through animal (rat) model study and their fruit preserving potential was determined by edible coating preparation with chitosan and other substances. Interestingly, the extract showed dose dependent (1000 µg mL-1) activity against these microbes in the following order: Enterobacter sp. (26.4 ± 1.5) > Chromobacter sp. (25.4 ± 1.6) > Pseudomonas sp. (24.5 ± 1.3) > Flavobacterium sp. (24.3 ± 1.4) > Xanthomonas sp. (23.6 ± 1.6) > Erwinia sp. (23.6 ± 1.6) > Lactobacillus sp. (19.6 ± 1.3). Similarly, the antifungal activity was found as Penicillium sp. (32.6 ± 1.3) > Cladosporium sp. (32.6 ± 1.5) > Alternaria sp. (30.3 ± 1.2) > Aspergillus sp. (29.9 ± 1.8) > Botrytis sp. (29.8 ± 1.2) > Fusarium sp. (28.6 ± 1.5) > Trichoderma sp. (19.8 ± 1.4) > Phytophthora sp. (16.2 ± 1.1). The acute toxicity and histopathological study results revealed that the extract possesses biocompatible in nature. The illumination transmittance and active functional groups involved in interaction among test methanol extract and chitosan investigated by UV-vis and Fourier-transform infrared spectroscopy (FTIR) analyses and found average light transmittance and few vital functional groups accountable for optimistic interaction to creak edible coating. Approximately four (set I-IV) treatment sets were prepared, and it was discovered that all of the coated Citrus maxima fruit quality characteristics including total soluble solids (TSS), weight loss (%), pH of fruit pulp juice, and decay percentage were significantly (p>0.05) better than uncoated fruit.

Preparation and Characterization of Eugenol Incorporated Pullulan-Gelatin Based Edible Film of Pickering Emulsion and Its Application in Chilled Beef Preservation.

The purpose of this study was to develop a composite film composed of eugenol Pickering emulsion and pullulan-gelatin, and to evaluate its preservation effect on chilled beef. The prepared composite film was comprehensively evaluated in terms of the stability of emulsion, the physical properties of the film, and an analysis of freshness preservation for chilled beef. The emulsion size (296.0 ± 10.2 nm), polydispersity index (0.457 ± 0.039), and potential (20.1 ± 0.9 mV) proved the success of emulsion. At the same time, the films displayed good mechanical and barrier properties. The index of beef preservation also indicated that eugenol was a better active ingredient than clove essence oil, which led to the rise of potential of hydrogen, chroma and water content, and effectively inhibited microbial propagation, protein degradation and lipid oxidation. These results suggest that the prepared composites can be used as promising materials for chilled beef preservation.

Novel edible films fabricated with HG-type pectin extracted from different types of hybrid citrus peels: Effects of pectin composition on film properties.

This study investigated the valorization of novel HG-type hybrid citrus pectins derived from three cultivars: Setoka (ST), Kanpei (KP), and Shiranui (SH), and their application as packaging materials. The physicochemical properties of these pectins and their corresponding films were evaluated and compared to commercial citrus pectin. Significant variations were observed in pectin yield (18.15-24.12 %) and other physicochemical characteristics, such as degree of esterification (DE), degree of methoxylation (DM), and monosaccharide composition, among the different cultivars. All hybrid citrus pectins were classified as high-methoxy pectin types (66.67-72.89 %) with typical structural configurations like commercial citrus pectin. However, hybrid citrus pectin films exhibited superior physical properties, including higher mechanical strength, flexibility, and lower water solubility than commercial citrus pectin film, while maintaining similar transparency and moisture content. Additionally, the films displayed smooth and uniform surface morphology, confirming their excellent film-forming properties. Correlation analysis revealed that DE positively influenced mechanical properties (r = 1.0). Furthermore, the monosaccharide composition of pectins showed strong relationships (r = 0.8-1.0) with the film's mechanical and barrier properties. These findings highlight the potential of hybrid citrus pectin as potential packaging material, and the knowledge of the structure-function relationship obtained in this study could be useful for the tailored modification of citrus pectin-based packages.

Development and characterization of edible films based on flaxseed gum incorporated with Piper betle extract.

There has been a shift from use of petroleum-based plastics, causing serious environmental pollution, towards innovative and biodegradable edible packaging. The present study documents the development of composite edible films based on the flaxseed gum (FSG) modified by the incorporation of betel leaf extract (BLE). The films were assessed for physicochemical, mechanical, morphological, thermal, antimicrobial and structural characteristics. Scanning electron microscopy images indicated that the roughness decreased with an increase in BLE concentration. The water vapor permeability of the FSG-BLE films ranged from 4.68 to 1.59 × 10-9 g s- 1 m- 2 Pa- 1, lower than that of the control sample (6.77 × 10-9 g s- 1 m- 2 Pa- 1). The BLE4 (containing 10 % BLE) films had the highest tensile strength of 32.46 MPa compared to the control sample (21.23 MPa). Similarly, EAB and seal strength of the films incorporated with BLE were ameliorated. X-ray diffraction pattern and FTIR illustrated the shift of amorphous to crystalline behavior and a significant interaction among the BLE and FSG functional groups. Furthermore, the thermal stability of the treated films was not affected significantly however, they showed improved antimicrobial activity with the highest diameter of inhibition zone in the BLE4 sample. This study concluded that the FSG-BLE composite films (BLE4 in particular) can be considered as novel packaging material for food conservation coupled with a potential to enhance the shelf life of perishable food products.

Influence of acetylation and chemical interaction on edible film properties and different processing methods for food application.

This study developed sweet potato starch (SPS) based edible films and investigated several methods (acetylation, amidated pectin (AP), and CaCl2 use) to improve the edibility and different processing methods (casting and extruding) to package food possible in commercial use. Starch acetylation was conducted with up to 8 mL of acetic acid (A8) and improved the stretchability and solubility of the film. The AP addition [∼30 wt% (P3)] enhanced the film strength, further increasing solubility. CaCl2 addition [∼150 mg/g of AP (C3)] also positively influenced the film solubility and water barrier properties of the films. The SPS-A8P3C3 film showed 3.41 times higher solubility than the native SPS film. Both casted and extruded SPS-A8P3C3 films drastically dissolved in high-temperature water. When applied to oil packaging, two films could delay the lipid oxidation of the packaged samples. These results demonstrate the usability of edible packaging and extruded film for commercial use.

Development of Multifunctional Nanoencapsulated trans-Resveratrol/Chitosan Nutraceutical Edible Coating for Strawberry Preservation.

Phytochemical nanoencapsulation for nutrient delivery and edible coatings for perishable food preservation are two emerging technologies. Leveraging the strong antimicrobial function of phytochemical nutrients, we propose convergent research to integrate the two technologies by embedding phytochemical-encapsulated nanoparticles in an edible coating on fresh fruits to achieve multiple functions. In particular, we report the study of an edible coating on strawberries that is composited of trans-resveratrol (R)-encapsulated nanoparticles (RNPs) embedded in a chitosan (CS) matrix. The biodegradable and biocompatible RNPs significantly increased the aqueous solubility of R by 150-fold and bioavailability by 3.5-fold after oral administration. Our results demonstrated the abilities of the RNP-embedded CS edible coating to diminish dehydration, prevent nutrient loss, inhibit microbe growth, increase nutraceutical value, preserve strawberry quality, and extend shelf life during storage at both 22 and 4 °C. Such a phytochemical nanoencapsulation-based edible coating is promising for the dual purposes of enhancing nutrient delivery and preserving perishable foods.

Composite films of sodium alginate and konjac glucomannan incorporated with tea polyphenols for food preservation.

At present, food waste has become a serious issue and the use of petroleum-based food packaging films has resulted in a series of potential hazards. Therefore, more attention has been focused on the development of new food packaging materials. The polysaccharide-based composite film loaded with active substances considered to be an excellent preservative material. A novel packaging film based on sodium alginate and konjac glucomannan (SA-KGM) blended with tea polyphenols (TP) was prepared in the present study. The excellent microstructure of films was shown by atomic force microscopy (AFM). It was indicated by FTIR spectra that the components could interact with each other through hydrogen bonds, which was also confirmed by molecular docking simulation. Meanwhile, the mechanical properties, barrier property, oxidation property, antibacterial activity, and stability of the structure of the TP-SA-KGM film were significantly improved. The AFM images and results of molecular docking simulation indicated that TP could affect the cell wall of bacteria by acting with peptidoglycan. Finally, the film showed excellent preservation effects in both beef and apples, which suggested that TP-SA-KGM film could be a novel bioactive packaging material with wide application potential in food preservation.

Edible alginate-based films with anti-SARS-CoV-2 activity.

The viability of SARS-CoV-2 on food surfaces and its propagation through the food chain has been discussed by several stakeholders, as it may represent a serious public health problem, bringing new challenges to the food system. This work shows for the first time that edible films can be used against SARS-CoV-2. Sodium alginate-based films containing gallic acid, geraniol, and green tea extract were evaluated in terms of their antiviral activity against SARS-CoV-2. The results showed that all these films have strong in vitro antiviral activity against this virus. However, a higher concentration of the active compound (1.25%) is needed for the film containing gallic acid to achieve similar results to those obtained for lower concentrations of geraniol and green tea extract (0.313%). Furthermore, critical concentrations of the active compounds in the films were used to evaluate their stability during storage. Results showed that gallic acid-loaded films lose their activity from the second week of storage, while films with geraniol and green tea extract only show a drop in activity after four weeks. These results highlight the possibility of using edible films and coatings as antiviral materials on food surfaces or food contact materials, which may help to reduce the spreading of viruses through the food chain.

Chitosan based encapsulation of Valeriana officinalis essential oil as edible coating for inhibition of fungi and aflatoxin B1 contamination, nutritional quality improvement, and shelf life extension of Citrus sinensis fruits.

In this study, a novel chitosan nanoemulsion coating embedded with Valeriana officinalis essential oil (Ne-VOEO) was synthesized in order to improve the postharvest quality of Citrus sinensis fruits against infesting fungi, and aflatoxin B1 (AFB1) mediated nutritional deterioration. The developed nanoemulsion was characterized through SEM, FTIR, XRD, and DLS analyses. The nanoemulsion showed controlled delivery of VOEO responsible for effective inhibition of Aspergillus flavus, A. niger, A. versicolor, Penicillium italicum, and Fusarium oxysporum growth at 6.5, 5.0, 4.0, 5.5, and 3.5 µL/mL, respectively and AFB1 production at 5.0 µL/mL. The biochemical and molecular mechanism of aflatoxigenic A. flavus inhibition, and AFB1 diminution was associated with impairment in ergosterol biosynthesis, methylglyoxal production, and stereo-spatial binding of valerianol in the cavity of Ver-1 protein. During in vivo investigation, Ne-VOEO coating potentially restrained the weight loss, and respiratory rate of C. sinensis fruits with delayed degradation of soluble solids, titrable acidity, pH, and phenolic contents along with maintenance of SOD, CAT, APX activities (p < 0.05) and sensory attributes under specific storage conditions. Based on overall findings, Ne-VOEO nanoemulsion could be recommended as green, and smart antifungal coating agent in prolonging the shelf-life of stored fruits with enhanced AFB1 mitigation.

Application of chickpea-based edible coating with chickpea husk polyphenols on the preservation of sunflower seeds.

The objective of this study was to evaluate the protective effect of a chickpea-based edible coating with the addition of polyphenols on the chemical, microbiological, and sensory quality of roasted sunflower seeds throughout storage. Four different samples were prepared: roasted sunflower seeds (control sample, SF-C), roasted sunflower seeds with BHT (SF-BHT), roasted sunflower seeds with chickpea-based coating (SF-CCs), and roasted sunflower seeds with chickpea-based coating with chickpea polyphenolic extract (SF-CCPE). The samples were stored for 60 days at room temperature, and their chemical, microbiological, and sensory parameters were analyzed. The acceptability of fresh samples was also studied. The use of chickpea-based coatings retarded the lipid oxidation process efficiently, but the inclusion of chickpea polyphenols in the coating enhanced the protective effect. At 60th day of storage, no statistically significant differences were found between SF-CCPE and SF-BHT in relation to peroxides and conjugated dienes values, saturated/unsaturated ratio, and hexanal content. Linoleic acid content was reduced significantly more in SF-CCs than SF-CCPE. The addition of chickpea coating with chickpea antioxidants did not modify the flavor of the sunflower seeds and was the most accepted treatment by the consumer. The formation of undesirable flavors (cardboard and oxidized) was less in SF-CC, SF-CCPE, and SF-BHT without finding significant differences between these treatments. None of the samples presented microbiological contamination or an increase in bacteria, yeast, and molds during storage. The chickpea-based coating was able to retard lipid oxidation in roasted sunflower seeds, proving to be a good alternative as a natural method to preserve foods with high lipid content. PRACTICAL APPLICATION: Discarded chickpeas and chickpea husks constitute byproducts from the chickpea industry. The grain husks are currently discarded or marketed at a very low cost, constituting a novel residue with antioxidant properties. Considering the growing interest in sustainability and the circular economy, this investigation proposes the utilization of nutritional materials to prepare edible coatings. The chickpea-based coatings loaded with polyphenol extract (obtained from the husk of chickpea) demonstrated to have a protective effect against lipid oxidation process in sunflower seeds, which represent a good alternative to be used for the food industry to increase the shelf life of lipid foods.

Phytochemicals-based edible coating for photodynamic preservation of fresh-cut apples.

Nature-derived chemicals have recently gained increased attention to settle down the challenges in the food industry. Quercetin has long been used as a natural medicine but its photoactivity has been neglected. In this work, by combining photodynamic bacteria inactivation (PDI) with an edible coating (Pectin/Quercetin) derived from FDA-approved chemicals, extend shelf-life and protected commercial quality of fresh-cut apples were achieved. Firstly, the potential photoactivated antibacterial performance of Quercetin (a natural plant flavonoid) was clarified with the treatment of a simulated sunlight lamp, realizing antibacterial efficacy of 100 % towards S. aureus (50 min) and L. monocytogenes (80 min) with light treatment. To develop safe and effective preservation of fresh-cut apples, Pectin/Quercetin edible coatings with 100 µmol/L quercetin were adopted. The results showed that the prepared edible coatings form a protective barrier over the surface of apples, effectively resisting bacterial infection and extending shelf life to 10 days while maintaining good commercial quality (including preferable color, keeping 100 % hardness, 80 % sugar content and 17.3 % weightlessness rate). Therefore, the prepared light-driven Pectin/Quercetin in this work has the potential to develop as fresh-cut fruit preservation technology.

Active edible films with plant extracts: a updated review of their types, preparations, reinforcing properties, and applications in muscle foods packaging and preservation.

Currently, edible films have been increasingly explored to solve muscle food spoilage during storage, especially through the incorporation of plant extracts to develop edible packaging materials. Natural polymers matrices with plant extracts are befitting for fabricating edible films by casting methods. In the films system, the structure and physicochemical properties were strengthened via chemical interactions between active molecules in plant extracts and the reactive groups in the polymer chain. The antibacterial and antioxidant properties were dramatically reinforced through both physical and chemical actions of the plant extracts. Additionally, edible films imbedded with color-rich plant extracts could be considered as potential sensitive indicators to monitor the spoilage degree of muscle foods in response to change in gas or temperature. Furthermore, these films could increase sensory acceptability, improve quality and prolong the shelf life of muscle foods. In this article, the types, preparation methods and reinforcing properties of the edible films with plant extracts were discussed. Also, the applications of these films were summarized on quality maintenance and shelf-life extension and intelligent monitoring in muscle foods. Finally, a novel technology for film preparation achieving high-stability and sustained release of active compounds will become an underlying trend for application in muscle food packaging.

Natural melanin nanoparticle-based photothermal film for edible antibacterial food packaging.

Although nanocomposite films had shown excellent potential in antibacterial food packaging, their potential harmful impact limits their further application in reality. Therefore, exploring a Generally Recognized As Safe (GRAS) nanomaterial that has antibacterial ability is the pioneer for the fabrication of a real edible nanocomposite-based antibacterial packaging film. Herein, for the first time by using the natural nanostructure extracted from cuttlefish ink, an edible antibacterial food packaging with high safety were constructed. The natural melanin nanoparticles (NMPs) in cuttlefish ink have good photothermal conversion ability. As such, by incorporating with natural pectin (PC) film and with near infrared (NIR) irradiation triggering, the results show that PC/NMPs films perform high-efficiency and short-term bactericidal activity against foodborne pathogenic bacteria, including thermotolerant Listeria monocytogenes. The sterilization rate could reach more than 90 % within only 5 min. Also, this nanocomposite film showed better mechanical properties, thermal stability and barrier properties than the neat pectin film. Antibacterial test on food sample also proved the good antibacterial ability of the PC/NMPs films. Therefore, exploring GRAS natural functional nanocomposite film is expected to be the effective way to promote edible nano-antibacterial packaging.

Antimicrobial and Antioxidant Activity of Apricot (Mimusopsis comersonii) Phenolic-Rich Extract and Its Application as an Edible Coating for Fresh-Cut Vegetable Preservation.

Edible coatings have several advantages in preserving foods, such as avoiding water loss, controlling microbial growth, and reducing the need for preservatives added directly to the product. Antimicrobial action can be obtained by adding antimicrobial substances including phenolic compounds commonly found in plant extracts. This study evaluated the phenolic compounds content, antioxidant and antimicrobial activity of pulp, and seed extracts of Mimusopsis comersonii (popularly known in Brazil as abrico), besides the phenolic compounds were identified and quantified in the pulp extract. Edible coatings were incorporated with pulp extract in order to evaluate the preservation of minimally processed apples and baroa potatoes against foodborne bacteria, and enzymatic browning was also determined. Myricetin-3-glucoside, quercetin-3-glucoside, and kaempferol-3-glucoside were identified as major flavonoids in the apricot pulp extract. The seed and pulp extracts inhibited all tested microorganisms, especially Staphylococcus aureus and Salmonella Typhimurium. Edible coatings added with 9% of phenolic extract showed in vitro antimicrobial activity, in addition to being effective in preventing enzymatic browning in minimally processed apples and baroa potatoes for up to 15 days of storage. They were also effective in reducing up to 2 log CFU/g of aerobic mesophiles after 15 days of storage for apples, even though no microbial inhibition in baroa potatoes was observed under the same conditions. The addition of pulp phenolic extract in edible coatings proved to be an alternative in the preservation of apples and in the antibrowning activity of minimally processed baroa potatoes.