Effect of Calcium Supplementation and TMEM16A Inhibition on Endoplasmic Reticulum Stress Induced by Dental Fluorosis in Mice.

BACKGROUND: Dental fluorosis is a discoloration of the teeth caused by the excessive consumption of fluoride. It represents a distinct manifestation of chronic fluorosis in dental tissues, exerting adverse effects on the human body, particularly on teeth. The transmembrane protein 16a (TMEM16A) is expressed at the junction of the endoplasmic reticulum and the plasma membrane. Alterations in its channel activity can disrupt endoplasmic reticulum calcium homeostasis and intracellular calcium ion concentration, thereby inducing endoplasmic reticulum stress (ERS). This study aims to investigate the influence of calcium supplements and TMEM16A on ERS in dental fluorosis. METHODS: C57BL/6 mice exhibiting dental fluorosis were subjected to an eight-week treatment with varying calcium concentrations: low (0.071%), medium (0.79%), and high (6.61%). Various assays, including Hematoxylin and Eosin (HE) staining, immunohistochemistry, real-time fluorescence quantitative polymerase chain reaction (qPCR), and Western blot, were employed to assess the impact of calcium supplements on fluoride content, ameloblast morphology, TMEM16A expression, and endoplasmic reticulum stress-related proteins (calreticulin (CRT), glucose-regulated protein 78 (GRP78), inositol requiring kinase 1α (IRE1α), PKR-like ER kinase (PERK), activating transcription factor 6 (ATF6)) in the incisors of mice affected by dental fluorosis. Furthermore, mice with dental fluorosis were treated with the TMEM16A inhibitor T16Ainh-A01 along with a medium-dose calcium to investigate the influence of TMEM16A on fluoride content, ameloblast morphology, and endoplasmic reticulum stress-related proteins in the context of mouse incisor fluorosis. RESULTS: In comparison to the model mice, the fluoride content in incisors significantly decreased following calcium supplements (p < 0.01). Moreover, the expression of TMEM16A, CRT, GRP78, IRE1α, PERK, and ATF6 were also exhibited a substantial reduction (p < 0.01), with the most pronounced effect observed in the medium-dose calcium group. Additionally, the fluoride content (p < 0.05) and the expression of CRT, GRP78, IRE1α, PERK, and ATF6 (p < 0.01) were further diminished following concurrent treatment with the TMEM16A inhibitor T16Ainh-A01 and a medium dose of calcium. CONCLUSIONS: The supplementation of calcium or the inhibition of TMEM16A expression appears to mitigate the detrimental effects of fluorosis by suppressing endoplasmic reticulum stress. These findings hold implications for identifying potential therapeutic targets in addressing dental fluorosis.

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride.

In aluminum electrolysis, the iron-rich cover material is formed on the cover material and the steel rod connecting the carbon anode. Due to the high iron content in the iron-rich cover material, it differs from traditional cover material and thus requires harmless recycling and treatment. A process was proposed and used in this study to recovery F, Al, and Fe elements from the iron-rich cover material. This process involved aluminum sulfate solution leaching for fluorine recovery and alkali-acid synergistic leaching for α-Al2O3 and Fe2O3 recovery were obtained. The optimal leaching rates for F, Na, Ca, Fe, and Si were 93.92, 96.25, 94.53, 4.48, and 28.87%, respectively. The leaching solution and leaching residue were obtained. The leaching solution was neutralized to obtain the aluminum hydroxide fluoride hydrate (AHFH, AlF1.5(OH)1.5·(H2O)0.375). AHFH was calcined to form a mixture of AlF3 and Al2O3 with a purity of 96.14%. The overall recovery rate of F in the entire process was 92.36%. Additionally, the leaching residue was sequentially leached with alkali and acid to obtain the acid leach residue α-Al2O3. The pH of the acid-leached solution was adjusted to produce a black-brown precipitate, which was converted to Fe2O3 under a high-temperature calcination, and the recovery rate of Fe in the whole process was 94.54%. Therefore, this study provides a new method for recovering F, Al, and Fe in iron-rich cover material, enabling the utilization of aluminum hazardous waste sources.

Riboflavin Attenuates Fluoride-Induced Testicular Injury via Interleukin 17A-Mediated Classical Pyroptosis.

Male reproductive toxicity of fluoride is of great concern worldwide, yet the underlying mechanism is unclear. Pyroptosis is a novel mode of inflammatory cell death, and riboflavin with anti-inflammatory properties has the potential to protect against fluoride damage. However, it is unknown whether pyroptosis is involved in fluoride-induced testicular injury and riboflavin intervention. Here, we first found that riboflavin could alleviate fluoride-caused lower sperm quality and damaged testicular morphology by reducing pyroptosis based on a model of ICR mice treated with NaF (100 mg/L) and/or riboflavin supplementation (40 mg/L) via drinking water for 13 weeks. And then, together with the results of in vitro Leydig cell modelsm it was confirmed that the pyroptosis occurs predominantly through classical NLRP3/Caspase-1/GSDMD pathway. Furthermore, our results reveal that interleukin-17A mediates the process of pyroptosis in testes induced by fluoride and riboflavin attenuation according to the results of our established models of riboflavin- and/or fluoride-treated IL-17A knockout mice. The results not only declare a new mechanism by which fluoride induces testicular injury via interleukin 17A-mediated classical pyroptosis but also provide evidence for the potential clinical application of riboflavin as an effective therapy for fluoride toxicity.

High efficiency adsorption of uranium by magnesia-silica-fluoride co-doped hydroxyapatite.

Hydroxyapatite has a high affinity to uranium, and element doping can effectively improve its adsorption performance. In this study, magnesia-silica-fluoride co-doped hydroxyapatite composite was prepared by hydrothermal method, and the effect of single-phase and multiphase doping on the structure and properties of the composites was investigated. The results showed that the specific surface area of Mg-Si-F-nHA composites increased by 63.01% after doping. Comparing with nHA, U(VI) adsorption capacity of Si-nHA, Mg-Si-nHA and Mg-Si-F-nHA composites increased by 13.01%, 17.39% and 22.03%, respectively. The adsorption capacity of Mg-Si-F-nHA composite reached 1286.76 mg/g. Adsorbent dosage and pH obviously affected U(VI) adsorption, and the experimental data can be fitted well by PSO and Sips models. The physicochemical characterization before and after adsorption suggested that complexation, ion exchange and precipitation participated in uranium adsorption. In conclusion, different elements doping can effectively improve the uranium adsorption properties of hydroxyapatite composites.

Biomimetic ZrO2-modified seaweed residue with excellent fluorine/ bacteria removal and uranium extraction properties for wastewater purification.

Exploring and developing promising biomass composite membranes for the water purification and waste resource utilization is of great significance. The modification of biomass has always been a focus of research in its resource utilization. In this study, we successfully prepare a functional composite membrane, activated graphene oxide/seaweed residue-zirconium dioxide (GOSRZ), with fluoride removal, uranium extraction, and antibacterial activity by biomimetic mineralization of zirconium dioxide nanoparticles (ZrO2 NPs) on seaweed residue (SR) grafted with oxidized graphene (GO). The GOSRZ membrane exhibits highly efficient and specific adsorption of fluoride. For the fluoride concentrations in the range of 100-400 mg/L in water, the removal efficiency can reach over 99 %, even in the presence of interfering ions. Satisfactory extraction rates are also achieved for uranium by the GOSRZ membrane. Additionally, the antibacterial performance studies show that this composite membrane efficiently removes Escherichia coli (E. coli) and Methicillin-resistant Staphylococcus aureus (MRSA). The high adsorption of F- and U(VI) to the composite membrane is ascribed to the ionic exchange and coordination interactions, and its antibacterial activity is caused by the destruction of bacterial cell structure. The sustainability of the biomass composite membranes is further evaluated using the Sustainability Footprint method. This study provides a simple preparation method of biomass composite membrane, expands the water purification treatment technology, and offers valuable guidance for the resource utilization of seaweed waste and the removal of pollutants in wastewater.

Amelogenin-inspired peptide, calcium phosphate solution, fluoride and their synergistic effect on enamel biomimetic remineralization: an in vitro pH-cycling model.

BACKGROUND: Several methods were introduced for enamel biomimetic remineralization that utilize a biomimetic analogue to interact and absorb bioavailable calcium and phosphate ions and induce crystal nucleation on demineralized enamel. Amelogenin is the most predominant enamel matrix protein that is involved in enamel biomineralization. It plays a major role in developing the enamel's hierarchical microstructure. Therefore, this study was conducted to evaluate the ability of an amelogenin-inspired peptide to promote the remineralization potential of fluoride and a supersaturated calcium phosphate solution in treating artificially induced enamel carious lesions under pH-cycling regimen. METHODS: Fifty enamel slices were prepared with a window (4*4 mm2 ) on the surface. Five samples were set as control healthy enamel and 45 samples were subjected to demineralization for 3 days. Another 5 samples were set as control demineralized enamel and 40 enamel samples were assigned into 8 experimental groups (n=5) (P/I, P/II, P/III, P/AS, NP/I, NP/II, NP/III and NP/AS) according to peptide treatment (peptide P or non-peptide NP) and remineralizing solution used (I; calcium phosphate solution, II; calcium phosphate fluoride solution, III; fluoride solution and AS; artificial saliva). Samples were then subjected to demineralization/remineralization cycles for 9 days. Samples in all experimental groups were evaluated using Raman spectroscopy for mineral content recovery percentage, microhardness and nanoindentation as healthy, demineralized enamel and after pH-cycling. Data were statistically analysed using two-way repeated measures Anova followed by Bonferroni-corrected post hoc test for pairwise multiple comparisons between groups. Statistical significance was set at p= 0.05. Additionally, XRD, FESEM and EDXS were used for crystal orientation, surface morphology and elemental analysis after pH-cycling. RESULTS: Nanocrystals clumped in a directional manner were detected in peptide-treated groups. P/II showed the highest significant mean values in mineral content recovery (63.31%), microhardness (268.81±6.52 VHN), elastic modulus (88.74±2.71 GPa), nanohardness (3.08±0.59 GPa) and the best crystal orientation with I002/I300 (1.87±0.08). CONCLUSION: Despite pH changes, the tested peptide was capable of remineralizing enamel with ordered crystals. Moreover, the supplementary use of calcium phosphate fluoride solution with peptide granted an enhancement in enamel mechanical properties after remineralization.

The effect of photobiomodulation therapy associated with casein phosphopeptide-amorphous calcium phosphate fluoride paste on the treatment of posthome whitening tooth sensitivity and color change: A randomized clinical trial.

OBJECTIVE: This study assessed whether combining photobiomodulation therapy (PBMT) with casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF) paste can effectively reduce post-home whitening tooth sensitivity (TS) without compromising shade change. METHODS: Fifty participants were selected and assigned to one of four groups: (1) PLACEBO group-received a placebo paste and PBMT simulation; (2) PBMT group-received a placebo paste + PBMT; (3) CPP-ACPF group-received CPP-ACPF paste and PBMT simulation; (4) CPP-ACPF + PBMT group-received both CPP-ACPF paste and PBMT. The participants used whitening trays containing 22% carbamide peroxide for 2 h a day for 21 days. TS was measured daily using a visual analog scale, while shade change was assessed using a spectrophotometer: before bleaching treatment (T0), after the first (T1), second (T2), and third (T3) weeks of treatment, and 30 days (T4) after completing the whitening treatment. RESULTS: Intragroup analysis revealed that the PLACEBO group had the highest increase in sensitivity during the whitening treatment. The CPP-ACPF and PBMT groups showed no significant difference tooth whitening (TW) between weeks regarding aesthetic change. The CPP-ACPF and PBMT group exhibited a significant reduction in TS between the first and third and between the second and third weeks TW, but not between the first and second. Conversely, the PLACEBO group showed a higher sensitivity than the other groups (p < .05). The CPP-ACPF and PBMT groups did not differ from each other. Furthermore, the CPP-ACPF and PBMT group showed a greater decrease in sensitivity than the PLACEBO group at T1, T2, and T3 (p < .01), and was significantly differed from CPP-ACPF and PBMT groups only at T2 and T3. All groups confirmed TW effectiveness. Student's and paired t-test did not reveal any significant difference between groups (p > .05). CONCLUSION: Therefore, PBMT associated with CPP-ACPF paste can reduce TS without compromising the efficacy of TW.

Systematic review of epidemiological and toxicological evidence on health effects of fluoride in drinking water.

INTRODUCTION: Fluoride is a naturally occurring substance that is also added to drinking water, dental hygiene products, and food supplements for preventing dental caries. Concerns have been raised about several other potential health risks of fluoride. OBJECTIVE: To conduct a robust synthesis of evidence regarding human health risks due to exposure to fluoride in drinking water, and to develop a point of departure (POD) for setting a health-based value (HBV) for fluoride in drinking water. METHODS: A systematic review of evidence published since recent reviews of human, animal, and in vitro data was carried out. Bradford Hill considerations were used to weigh the evidence for causality. Several key studies were considered for deriving PODs. RESULTS: The current review identified 89 human studies, 199 animal studies, and 10 major in vitro reviews. The weight of evidence on 39 health endpoints was presented. In addition to dental fluorosis, evidence was considered strong for reduction in IQ scores in children, moderate for thyroid dysfunction, weak for kidney dysfunction, and limited for sex hormone disruptions. CONCLUSION: The current review identified moderate dental fluorosis and reduction in IQ scores in children as the most relevant endpoints for establishing an HBV for fluoride in drinking water. PODs were derived for these two endpoints, although there is still some uncertainty in the causal weight of evidence for causality for reducing IQ scores in children and considerable uncertainty in the derivation of its POD. Given our evaluation of the overall weight of evidence, moderate dental fluorosis is suggested as the key endpoint until more evidence is accumulated on possible reduction of IQ scores effects. A POD of 1.56 mg fluoride/L for moderate dental fluorosis may be preferred as a starting point for setting an HBV for fluoride in drinking water to protect against moderate and severe dental fluorosis. Although outside the scope of the current review, precautionary concerns for potential neurodevelopmental cognitive effects may warrant special consideration in the derivation of the HBV for fluoride in drinking water.

Protocol for producing phosphoramidate using phosphorus fluoride exchange click chemistry.

Phosphorus fluoride exchange (PFEx) is a catalytic click reaction that involves exchanging high oxidation state P-F bonds with alcohol and amine nucleophiles, reliably yielding P-O- and P-N-linked compounds. Here, we describe steps for preparing a phosphoramidic difluoride and performing two sequential PFEx reactions to yield a phosphoramidate through careful catalyst selection. We then detail procedures for handling and quenching potentially toxic P-F-containing compounds to ensure user safety when conducting PFEx reactions. For complete details on the use and execution of this protocol, please refer to Sun et al.1.

An in vitro evaluation of the effects of fluoride, CPP-ACP, or resin infiltration on discoloration caused by pediatric supplements.

OBJECTIVES: White spot lesions are more susceptible to staining agents due to their porous structure. This study examines the impact of white spot lesion treatments on discoloration caused by pediatric supplements. METHOD AND MATERIALS: Three treatments (fluoride, casein phosphopeptide-amorphous calcium phosphate [CPP-ACP], resin infiltration), a control, and their respective syrup-based subgroups (iron and black elderberry syrups) were established, each with eight teeth. Artificial white spot lesions were induced, and weekly applications of fluoride varnish, daily applications of CPP-ACP paste, or a single resin infiltration procedure were performed on the white spot lesions within the treatment groups over 4 weeks. Simultaneously, samples were exposed daily to iron or black elderberry syrups. Spectrophotometer measurements were taken at baseline, after demineralization (T0), and after 1 (T1), 2 (T2), and 4 weeks (T4). ΔE00 values were calculated. Statistical analysis was conducted using a three-way mixed-design ANOVA, with the significance level set at P = .05. RESULTS: At T4, ΔE00 values from all groups exceeded the clinical acceptability limit of 1.8. At T2 and T4, the ΔE00 values obtained from the black elderberry syrup subgroups were significantly higher (P < .001). At T4, the highest ΔE00 values were seen in the CPP-ACP groups (P < .001). The lowest ΔE00 values at T2 and T4 were observed in the resin infiltration groups (P < .05). CONCLUSIONS: Supplements containing ferrous sulfate and black elderberry extract caused color changes in white spot lesions that exceeded the clinical acceptability limit. Resin infiltration of white spot lesions provides advantages over remineralization treatments, particularly in minimizing discoloration induced by pediatric supplements.

Pomegranate extract in polyphosphate-fluoride mouthwash reduces enamel demineralization.

OBJECTIVES: To evaluate the anti-demineralizing effect of a mouthwash comprising pomegranate peel extract (PPE 3%), sodium trimetaphosphate (TMP 0.3%), and fluoride (F 225 ppm) in an in situ study, and to assess its irritation potential in an ex vivo study. METHODS: This double-blind crossover study was conducted in four phases with 7 days each. Twelve volunteers used palatal appliances containing enamel blocks, which were subjected to cariogenic challenges. The ETF formulation (PPE + TMP + F, pH 7.0), TF formulation (TMP + F, pH 7.0), deionized water (W, pH 7.0), and essential oil commercial mouthwash (CM, 220 ppm F, pH 4.3) were dropped onto the enamel twice daily. The percentage of surface hardness loss, integrated loss of subsurface hardness, calcium, phosphorus, and fluoride in enamel and biofilms were determined. In addition, alkali-soluble extracellular polysaccharide concentrations were analyzed in the biofilms. The irritation potential was evaluated using the hen's egg chorioallantoic membrane test through the vascular effect produced during 300-s of exposure. RESULTS: ETF was the most efficacious in preventing demineralization. It also showed the highest concentrations of calcium and phosphorus in the enamel and in the biofilm, as well as the lowest amount of extracellular polysaccharides in the biofilm. In the eggs, ETF produced light reddening, whereas CM led to hyperemia and hemorrhage. CONCLUSIONS: The addition of PPE to formulations containing TMP and F increased its anti-demineralizing property, and this formulation presented a lower irritation potential than the CM. CLINICAL RELEVANCE: ETF can be a promising alternative alcohol-free mouthwash in patients at high risk of caries.

Unveiling the presence of fluoride in commercial tea infusion: Factors influencing its release and its adsorptive elimination by indigenously developed nanoadsorbents.

Drinking tea, which is globally one of the most widely consumed beverages, is a potential source of fluoride toxicity. This research aimed at fluoride estimation in the infusions of commercial black tea and green tea samples, purchased from the local Indian market, systematic evaluation of the factors influencing the fluoride release and the adsorptive removal of fluoride using the indigenously developed nanoadsorbents. All the prepared infusions had fluoride content above the permissible WHO limits. Various factors, which affect the release of fluoride from tea leaves into the infusion include type of water, tea dosage and brewing time. The investigations revealed that, the fluoride content in the black tea infusions was much higher than the green tea infusions. Further, it also depended on the amount of tea leaves used for brewing. The fluoride, present in tea leaves, is released gradually and within just 1 min of brewing, the concentration of fluoride in the infusions was well above the permissible WHO limits. It was also observed that, the dried unprocessed tea leaves, when brewed in water, had high fluoride content. This further confirmed the presence of fluoride in tea infusion, which demands an efficient remediation technique. The developed nanoadsorbents exhibited efficient defluoridation of groundwater, and were therefore tested for their efficiency in defluoridating tea infusions as well. These nanoadsorbents could efficiently eliminate fluoride from both green and black tea infusions, bringing down the fluoride content below the WHO limits, thereby rendering the infusions safe. They exhibited rapid kinetics with high efficiency in adsorbing fluoride from tea infusions. These properties make them potential adsorbents for defluoridating tea infusion, which provides a probable solution to the problem of fluoride toxicity from drinking tea. This is one of the first reports on a technique for eliminating fluoride from tea infusions.

Calcium supplementation attenuates fluoride-induced bone injury via PINK1/Parkin-mediated mitophagy and mitochondrial apoptosis in mice.

Excessive consumption of fluoride can cause skeletal fluorosis. Mitophagy has been identified as a novel target for bone disorders. Meanwhile, calcium supplementation has shown great potential for mitigating fluoride-related bone damage. Hence, this study aimed to elucidate the association between mitophagy and skeletal fluorosis and the precise mechanisms through which calcium alleviates these injuries. A 100 mg/L sodium fluoride (NaF) exposure model in Parkin knockout (Parkin-/-) mice and a 100 mg/L NaF exposure mouse model with 1% calcium carbonate (CaCO3) intervention were established in the current study. Fluoride exposure caused the impairment of mitochondria and activation of PTEN-induced putative kinase1 (PINK1)/E3 ubiquitin ligase Park2 (Parkin)-mediated mitophagy and mitochondrial apoptosis in the bones, which were restored after blocking Parkin. Additionally, the intervention model showed fluoride-exposed mice exhibited abnormal bone trabecula and mechanical properties. Still, these bone injuries could be effectively attenuated by adding 1% calcium to their diet, which reversed fluoride-activated mitophagy and apoptosis. To summarize, fluoride can activate bone mitophagy through the PINK1/Parkin pathway and mitochondrial apoptosis. Parkin-/- and 1% calcium provide protection against fluoride-induced bone damage. Notably, this study provides theoretical bases for the prevention and therapy of animal and human health and safety caused by environmental fluoride contamination.

Effect of nanometric ß-calcium glycerophosphate supplementation in conventional toothpaste on enamel demineralization: An in vitro study.

The aim of this study was to evaluate the effects of supplementing toothpastes containing 1100 ppm F with micrometric or nanometric [beta]-calcium glycerophosphate (ß-CaGPm/ß-CaGPn) on artificial enamel demineralization, using a pH cycling model. Bovine enamel blocks (4 mm × 4 mm, n = 120) selected using initial surface hardness were randomly allocated to ten toothpaste groups (n = 12): without fluoride or ß-CaGPm or ß-CaGPn (Negative control), 1100 ppm F (1100 F), and 1100 ppm F plus 0.125%, 0.25%, 0.5%, and 1.0% of ß-CaGPm or ß-CaGPn. Blocks were treated two times per day with toothpaste slurry and subjected to five pH cycles (demineralizing and remineralizing solutions) at 37 °C. The final surface hardness, percentage of surface hardness loss (%SH), cross-sectional hardness (ΔKHN), and profile analysis and lesion depth subsurface were analysed using polarized light microscopy (PLM). Fluoride (F), calcium (Ca), and phosphorus (P) concentrations were also measured. Data were analysed using ANOVA and Student-Newman-Keuls tests ([alpha] = 0.001). Blocks treated with 1100 F toothpaste containing 0.5%ß-CaGPm or 0.25%ß-CaGPn showed with reduced %SH values when compared with those treated with 1100 F alone (p < 0.001). Reduced lesion depths (ΔKHN and PLM) were observed for the slurry made up of 1100 F and 0.25%ß-CaGPn (p < 0.001). The addition of ß-CaGPm and ß-CaGPn did not influence the enamel F concentration, with the 1100 F/0.25%ß-CaGPn group exhibiting the highest Ca and P enamel concentrations (p < 0.001). Based on the findings of this in vitro study, we can conclude that the fluoride toothpaste produced a superior effect when combined at an appropriate ß-CaGP molar ratio. This effect was achieved with a lower proportion of ß-CaGP in the form of nanometric particles.

Association between polymorphism and haplotype of ATP2B1 gene and skeletal fluorosis in Han population.

To evaluate the association between ATP2B1 gene polymorphisms and skeletal fluorosis, a cross-sectional study was conducted. In China, 962 individuals were recruited, including 342 cases of skeletal fluorosis. Four TP2BA1 polymorphisms (rs2070759, rs12817819, rs17249754, and rs7136259) were analysed. The results suggested that rs17249754 and rs7136259 were associated with skeletal fluorosis. After controlling confounders, the protective effect of GG genotype in rs17249754 was apparent in individuals over 45 years old, female, with urine fluoride concentration below 1.6 mg/L, serum calcium above 2.25 mmol/L or serum phosphorus between 1.1 and 1.3. Heterozygote TC in rs7136259 increased the risk of skeletal fluorosis in subjects who are elderly, female, with urinary fluoride more than 1.6 mg/L, serum calcium more than 2.25 mmol/L and blood phosphorus between 1.1 and 1.3 mmol/L. Four loci were found to be tightly related by linkage disequilibrium analysis, and the frequency of distribution of haplotype GCGT was lower in the skeletal fluorosis group.

Periploca forrestii Schltr. ameliorate liver injury caused by fluorosis in rat.

To investigate the impact of the ethanoic fractions of Periploca forrestii Schltr. (P. forrestii) in ameliorating the liver injury caused by fluoride ingestion and to explore the potential mechanisms. Initially, an in vitro fluorosis cell model was constructed using the human normal liver cell line (L-02) induced by fluoride. Cell viability was assessed using the CCK-8 assay kit. The lactate dehydrogenase (LDH) assay kit was utilized to measure LDH content in the cell supernatant, while the malonic dialdehyde (MDA) assay kit was employed to determine MDA levels within the cells. Subsequently, a fluorosis rat model was established, and LDH content in the cell supernatant was measured using the LDH assay kit. Various parameters, including MDA, superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), catalase (CAT), and reactive oxygen species (ROS) content within the cells, were detected using appropriate assay kits. Additionally, cell apoptosis rate was determined using the Annexin V-FITC/PI cell apoptosis assay kit. The protein expression levels of B-cell lymphoma-2 (Bcl-2), Bcl-2-associated X protein (Bax), Caspase-3, Cleaved Caspase-3, Caspase-9, and Cleaved Caspase-9 were analyzed through Western blotting. Compared to the model group, the ethanolic fraction D of P.forrestii (Fr.D) increased cell viability (P < 0.01) and decreased LDH and MDA levels (P < 0.01). In the high-dose Fr.D treatment group of fluoride-poisoned rats, serum ALT, AST, LDH and MDA levels significantly decreased (P < 0.01). Results from rat primary cells exhibited that the Fr.D administration group exhibited significantly higher cell survival rates than the fluoride group (P < 0.01). Similarly, primary rat cells treated with Fr.D showed enhanced cell viability (P < 0.05) and reduced apoptosis rate, LDH, MDA, SOD, GSH-Px, CAT, and ROS levels (P < 0.05) compared to the model group. Western blot analysis indicated that the Fr.D treatment group elevated the Bcl-2/Bax protein expression ratio and reduced Caspase-3 and Caspase-9 activation levels (P < 0.01) compared to the model group. The results suggest that components within the Fr.D from Periploca forrestii may alleviate fluoride-induced liver injury by potentially counteracting oxidative stress and cell apoptosis.

Synthesis and application of lanthanum-doped magnetic biochar composite adsorbent for removal of fluoride from water.

Fluoride levels greater than 1.5 mg/L in drinking water are a global environmental issue that can seriously harm the health of humans. One of the most effective techniques for defluoridating water is adsorption. The main drawbacks of many adsorbent materials include their poor adsorption capabilities, prolonged contact times, excessively low or high pH levels, and high dosages. The biochar-based magnetic nanocomposite adsorbent was synthesized in the current study and used as an adsorbent for water defluoridation. Through slow pyrolysis, coffee husk waste was converted to biochar. The composite was created by chemically co-precipitating iron and lanthanum oxide nanoparticles onto the surface of biochar. By using X-ray diffraction analysis (XRD), Fourier transform infrared spectrometry (FTIR), Brunauer-Emmett-Teller (BET), and pHPZC values, researchers were able to describe the magnetic biochar nanocomposite material. The Central Composite Design (CCD), which uses four input variables including dosage (2-5 g/L), solution pH (4-8), contact time (30-70 min), and initial concentration (10-20 mg/L), was used to design the experiments. The quadratic model indicated that the ideal conditions for removing 98.994% of the fluoride from water (adsorbent dosage of 5 g L-1, pH 5.74, contact period of 60 min, and initial concentration of 12.245 mg/L) would be attained. The average triplicate value in ideal circumstances produced a removal effectiveness of 98.51%, demonstrating the proposed response surface's capacity for prediction. The findings of this investigation showed that the magnetic biochar nanocomposite that was created is an effective fluoride adsorbent.

Effect of Plant-Based Mouthwash (Morinda citrifolia and Ocimum sanctum) on TNF-α, IL-α, IL-ß, IL-2, and IL-6 in Gingival Crevicular Fluid and Plaque Scores of Patients Undergoing Fixed Orthodontic Treatment.

Background and Objectives: To investigate the antiplaque properties of two plant-based mouthwashes, Morinda citrifolia (MC) and Ocimum sanctum (OS), and their effect on TNF-α, IL-α, IL-ß, IL-2, and IL-6 in gingival crevicular fluid (GCF) of patients undergoing fixed orthodontic treatment. Materials and Methods: Seventy-five individuals were recruited according to defined inclusion and exclusion criteria. This study was structured into two distinct phases. Phase I was a combination of toothbrushing using toothpaste containing fluoride (Protocol A), while Phase II toothbrushing included fluoride toothpaste and use of a mouthwash (Protocol B). For Phase II, individuals participating in this study were allocated into different groups through a randomization process: Group 1-0.12% CHX, Group 2-5% MC, and Group 3-4% OS. Each individual's Phase I and Phase II scores were assessed. GCF was measured in three phases to determine the level of inflammatory biomarkers. The paired t-test evaluated the disparities between the pre- and post-plaque index. Categorical data were subjected to crosstab analysis to assess qualitative variables. The mean values of cytokine levels were presented. An unpaired t-test was employed to assess the levels of cytokines between individuals in Phase I and Phase II. Results: Toothbrushing, fluoride toothpaste, and the supplementary use of mouthwash (Phase II) resulted in mean plaque scores significantly lower than group A (p < 0.001). Cytokines TNF-α, IL-α, and IL-ß demonstrated a significant downward trend in herbal mouthwash users. Conclusions: In conjunction with fluoridated toothpaste and brushing, OS and MC can serve as a viable alternative to conventional synthetic mouthwash CHX. This combination demonstrates reducing mean plaque scores and diminishing the levels of cytokines TNF-α, IL-α, and IL-ß.

Hydrochemistry, quality, and integrated health risk assessments of groundwater in the Huaibei Plain, China.

Groundwater is an essential freshwater resource utilized in industry, agriculture, and daily life. In the Huaibei Plain (HBP), where groundwater significantly influences socio-economic development, information about its quality, hydrochemistry, and related health risks remains limited. We conducted a comprehensive groundwater sampling in the HBP and examined its rock characteristics, water quality index (WQI), and potential health risks. The results revealed that the primary factors shaping groundwater hydrochemistry were rock dissolution and weathering, cation exchange, and anthropogenic activities. WQI assessment indicated that only 73% of the groundwaters is potable, as Fe2+, Mn2+, NO3-, and F- contents in the water could pose non-carcinogenic hazards to humans. Children were more susceptible to these health risks through oral ingestion than adults. Uncertainty analysis indicated that the probabilities of non-carcinogenic risk were approximately 57% and 31% for children and adults, respectively. Sensitivity analysis further identified fluoride as the primary factor influencing non-carcinogenic risks, indicating that reducing fluoride contamination should be prioritized in future groundwater management in the HBP.

Fluorides immobilization through calcium aluminate cement-based backfill: Accessing the detailed leaching characterization under torrential rainfall.

Urbanization and economic development have increased the demand for fertilizers to sustain food crop yields. Huge amounts of by-products, especially phosphogypsum (PG), are generated during the wet processing of rock phosphate to produce fertilizers. Chronic exposure to fluoride in phosphogypsum in groundwater as a result of the weathering of fluoride-containing waste poses a significant health risk to millions of people. We propose a method for using calcium aluminate cement (CAC) to remediate high fluoride contents in solid waste. Column leaching tests under harsh rainfall conditions confirmed the efficient fluoride immobilization capacity of a CAC binder. Although the fluoride concentrations in leachates during the first 1-2 days (1.25 mg/L) slightly exceeded the threshold of 1.00 mg/L, the concentrations over 3-28 days (ranging from 0.98 to 0.83 mg/L) consistently remained well within the acceptable range. Furthermore, our characterization and geochemical modeling revealed the fluoride retention mechanisms of CAC-stabilized PG under laboratory-simulated conditions of torrential rainfall. During leaching, physical encapsulation prevents fluoride from contacting leachate. However, an unfavorable pH value can cause the release of fluoride from the cement matrix, which is subsequently captured by aluminate hydrate through adsorption or co-precipitation. We quantified the carbon footprint of CAC for immobilizing 1 mg of fluoride in PG, obtaining a remarkably low value of 4.4 kg of CO2, in contrast to the emissions associated with the use of ordinary Portland cement (OPC). The findings suggest a unique opportunity for extensive PG remediation. This opportunity extends the horizons of achieving zero-waste emissions in the phosphorus industry and has practical significance in the context of reducing carbon emissions.