A novel method for tracking nitrogen kinetics in vivo under hyperbaric conditions using radioactive nitrogen-13 gas and positron emission tomography.

Decompression sickness (DCS) is caused by gaseous nitrogen dissolved in tissues forming bubbles during decompression. To date, no method exists to identify nitrogen within tissues, but with advances in positron-emission tomography (PET) technology, it may be possible to track gaseous radionuclides into tissues. We aimed to develop a method to track nitrogen movement in vivo and under hyperbaric pressure that could then be used to further our understanding of DCS using nitrogen-13 (13N2). A single anesthetized female Sprague-Dawley rat was exposed to 625 kPa, composed of air, isoflurane, and 13N2 for 10 min. The PET scanner recorded 13N2 during the hyperbaric exposure with energy windows of 250-750 keV. The PET showed an increase in 13N2 concentration in the lung, heart, and abdominal regions, which all reached a plateau after ∼4 min. This showed that it is possible to gain noninvasive in vivo measurements of nitrogen kinetics through the body while at hyperbaric pressures. Tissue samples showed radioactivity above background levels in the blood, brain, liver, femur, and thigh muscle when assessed using a γ counter. The method can be used to evaluate an array of challenges to our understanding of decompression physiology by quantifying nitrogen load through γ counts of 13N2, and signal intensity of the PET. Further development of the method will improve the specificity of the measured outcomes, and enable it to be used with larger mammals, including humans.NEW & NOTEWORTHY This article describes a method for the in vivo quantification and tracking of nitrogen through the mammalian body whilst exposed to hyperbaric pressure. The method has the potential to further our understanding of decompression sickness, and quantitatively evaluate the effectiveness of both the treatment and prevention of decompression sickness.

Sulfur assimilation using gaseous carbonyl sulfide by the soil fungus Trichoderma harzianum.

Fungi have the capacity to assimilate a diverse range of both inorganic and organic sulfur compounds. It has been recognized that all sulfur sources taken up by fungi are in soluble forms. In this study, we present evidence that fungi can utilize gaseous carbonyl sulfide (COS) for the assimilation of a sulfur compound. We found that the filamentous fungus Trichoderma harzianum strain THIF08, which has constitutively high COS-degrading activity, was able to grow with COS as the sole sulfur source. Cultivation with 34S-labeled COS revealed that sulfur atom from COS was incorporated into intracellular metabolites such as glutathione and ergothioneine. COS degradation by strain THIF08, in which as much of the moisture derived from the agar medium as possible was removed, indicated that gaseous COS was taken up directly into the cell. Escherichia coli transformed with a COS hydrolase (COSase) gene, which is clade D of the ß-class carbonic anhydrase subfamily enzyme with high specificity for COS but low activity for CO2 hydration, showed that the COSase is involved in COS assimilation. Comparison of sulfur metabolites of strain THIF08 revealed a higher relative abundance of reduced sulfur compounds under the COS-supplemented condition than the sulfate-supplemented condition, suggesting that sulfur assimilation is more energetically efficient with COS than with sulfate because there is no redox change of sulfur. Phylogenetic analysis of the genes encoding COSase, which are distributed in a wide range of fungal taxa, suggests that the common ancestor of Ascomycota, Basidiomycota, and Mucoromycota acquired COSase at about 790-670 Ma.IMPORTANCEThe biological assimilation of gaseous CO2 and N2 involves essential processes known as carbon fixation and nitrogen fixation, respectively. In this study, we found that the fungus Trichoderma harzianum strain THIF08 can grow with gaseous carbonyl sulfide (COS), the most abundant and ubiquitous gaseous sulfur compound, as a sulfur source. When the fungus grew in these conditions, COS was assimilated into sulfur metabolites, and the key enzyme of this assimilation process is COS hydrolase (COSase), which specifically degrades COS. Moreover, the pathway was more energy efficient than the typical sulfate assimilation pathway. COSase genes are widely distributed in Ascomycota, Basidiomycota, and Mucoromycota and also occur in some Chytridiomycota, indicating that COS assimilation is widespread in fungi. Phylogenetic analysis of these genes revealed that the acquisition of COSase in filamentous fungi was estimated to have occurred at about 790-670 Ma, around the time that filamentous fungi transitioned to a terrestrial environment.

Exposure risk to rural Residents: Insights into particulate and gas phase pesticides in the Indoor-Outdoor nexus.

Rural residents are exposed to both particulate and gaseous pesticides in the indoor-outdoor nexus in their daily routine. However, previous personal exposure assessment mostly focuses on single aspects of the exposure, such as indoor or gaseous exposure, leading to severe cognition bias to evaluate the exposure risks. In this study, residential dust and silicone wristbands (including stationary and personal wearing ones) were used to screen pesticides in different phases and unfold the hidden characteristics of personal exposure via indoor-outdoor nexus in intensive agricultural area. Mento-Carlo Simulation was performed to assess the probabilistic exposure risk by transforming adsorbed pesticides from wristbands into air concentration, which explores a new approach to integrate particulate (dust) and gaseous (silicone wristbands) pesticide exposures in indoor and outdoor environment. The results showed that particulate pesticides were more concentrated in indoor, whereas significantly higher concentrations were detected in stationary outdoor wristbands (p < 0.05). Carbendazim and chlorpyrifos were the most frequently detected pesticides in dust and stationary wristbands. Higher pesticide concentration was found in personal wristbands worn by farmers, with the maximum value of 2048 ng g-1 for difenoconazole. Based on the probabilistic risk assessment, around 7.1 % of farmers and 2.6 % of bystanders in local populations were potentially suffering from chronic health issues. One third of pesticide exposures originated mainly from occupational sources while the rest derived from remoting dissipation. Unexpectedly, 43 % of bystanders suffered the same levels of exposure as farmers under the co-existence of occupational and non-occupational exposures. Differed compositions of pesticides were found between environmental samples and personal pesticide exposure patterns, highlighting the need for holistic personal exposure measurements.

Current trends in gas-synergized phototherapy for improved antitumor theranostics.

Phototherapy, such as photothermal therapy (PTT) and photodynamic therapy (PDT), has been considered an elegant solution to eradicate tumors due to its minimal invasiveness and low systemic toxicity. Nevertheless, it is still challenging for phototherapy to achieve ideal outcomes and clinical translation due to its inherent drawbacks. Owing to the unique biological functions, diverse gases have attracted growing attention in combining with phototherapy to achieve super-additive therapeutic effects. Specifically, gases such as nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2S) have been proven to kill tumor cells by inducing mitochondrial damage in synergy with phototherapy. Additionally, several gases not only enhance the thermal damage in PTT and the reactive oxygen species (ROS) production in PDT but also improve the tumor accumulation of photoactive agents. The inflammatory responses triggered by hyperthermia in PTT are also suppressed by the combination of gases. Herein, we comprehensively review the latest studies on gas-synergized phototherapy for cancer therapy, including (1) synergistic mechanisms of combining gases with phototherapy; (2) design of nanoplatforms for gas-synergized phototherapy; (3) multimodal therapy based on gas-synergized phototherapy; (4) imaging-guided gas-synergized phototherapy. Finally, the current challenges and future opportunities of gas-synergized phototherapy for tumor treatment are discussed. STATEMENT OF SIGNIFICANCE: 1. The novelty and significance of the work with respect to the existing literature. (1) Strategies to design nanoplatforms for gas-synergized anti-tumor phototherapy have been summarized for the first time. Meanwhile, the integration of various imaging technologies and therapy modalities which endow these nanoplatforms with advanced theranostic capabilities has been summarized. (2) The mechanisms by which gases synergize with phototherapy to eradicate tumors are innovatively and comprehensively summarized. 2. The scientific impact and interest. This review elaborates current trends in gas-synergized anti-tumor phototherapy, with special emphases on synergistic anti-tumor mechanisms and rational design of therapeutic nanoplatforms to achieve this synergistic therapy. It aims to provide valuable guidance for researchers in this field.

Treatment of volatile organic compounds and other waste gases using membrane biofilm reactors: A review on recent advancements and challenges.

This article provides a comprehensive review of membrane biofilm reactors for waste gas (MBRWG) treatment, focusing on studies conducted since 2000. The first section discusses the membrane materials, structure, and mass transfer mechanism employed in MBRWG. The concept of a partial counter-diffusion biofilm in MBRWG is introduced, with identification of the most metabolically active region. Subsequently, the effectiveness of these biofilm reactors in treating single and mixed pollutants is examined. The phenomenon of membrane fouling in MBRWG is characterized, alongside an analysis of contributory factors. Furthermore, a comparison is made between membrane biofilm reactors and conventional biological treatment technologies, highlighting their respective advantages and disadvantages. It is evident that the treatment of hydrophobic gases and their resistance to volatility warrant further investigation. In addition, the emergence of the smart industry and its integration with other processes have opened up new opportunities for the utilization of MBRWG. Overcoming membrane fouling and developing stable and cost-effective membrane materials are essential factors for successful engineering applications of MBRWG. Moreover, it is worth exploring the mechanisms of co-metabolism in MBRWG and the potential for altering biofilm community structures.

Optimization of syngas production from co-gasification of palm oil decanter cake and alum sludge: An RSM approach with char characterization.

The study explores co-gasification of palm oil decanter cake and alum sludge, investigating the correlation between input variables and syngas production. Operating variables, including temperature (700-900 °C), air flow rate (10-30 mL/min), and particle size (0.25-2 mm), were optimized to maximize syngas production using air as the gasification agent in a fixed bed horizontal tube furnace reactor. Response Surface Methodology with the Box-Behnken design was used employed for optimization. Fourier Transformed Infra-Red (FTIR) and Field Emission Scanning Electron Microscopic (FESEM) analyses were used to analyze the char residue. The results showed that temperature and particle size have positive effects, while air flow rate has a negative effect on the syngas yield. The optimal CO + H2 composition of 39.48 vol% was achieved at 900 °C, 10 mL/min air flow rate, and 2 mm particle size. FTIR analysis confirmed the absence of C─Cl bonds and the emergence of Si─O bonds in the optimized char residue, distinguishing it from the raw sample. FESEM analysis revealed a rich porous structure in the optimized char residue, with the presence of calcium carbonate (CaCO3) and aluminosilicates. These findings provide valuable insights for sustainable energy production from biomass wastes.

Engineering Atomically Dispersed Cu-N1S2 Sites via Chemical Vapor Deposition to Boost Enzyme-Like Activity for Efficient Tumor Therapy.

Single-atom nanozymes (SAzymes), with well-defined and uniform atomic structures, are an emerging type of natural enzyme mimics. Currently, it is important but challenging to rationally design high-performance SAzymes and deeply reveal the interaction mechanism between SAzymes and substrate molecules. Herein, this work reports the controllable fabrication of a unique Cu-N1S2-centred SAzyme (Cu-N/S-C) via a chemical vapor deposition-based sulfur-engineering strategy. Benefiting from the optimized geometric and electronic structures of single-atom sites, Cu-N/S-C SAzyme shows boosted enzyme-like activity, especially in catalase-like activity, with a 13.8-fold increase in the affinity to hydrogen peroxide (H2O2) substrate and a 65.2-fold increase in the catalytic efficiency when compared to Cu-N-C SAzyme with Cu-N3 sites. Further theoretical studies reveal that the increased electron density around single-atom Cu is achieved through electron redistribution, and the efficient charge transfer between Cu-N/S-C and H2O2 is demonstrated to be more beneficial for the adsorption and activation of H2O2. The as-designed Cu-N/S-C SAzyme possesses an excellent antitumor effect through the synergy of catalytic therapy and oxygen-dependent phototherapy. This study provides a strategy for the rational design of SAzymes, and the proposed electron redistribution and charge transfer mechanism will help to understand the coordination environment effect of single-atom metal sites on H2O2-mediated enzyme-like catalytic processes.

Composition analysis and health risk assessment of the hazardous compounds in cooking fumes emitted from heated soybean oils with different refining levels.

The cooking fumes generated from thermal cooking oils contains various of hazardous components and shows deleterious health effects. The edible oil refining is designed to improve the oil quality and safety. While, there remains unknown about the connections between the characteristics and health risks of the cooking fumes and oils with different refining levels. In this study, the hazardous compounds, including aldehydes, ketones, polycyclic aromatic hydrocarbons (PAHs), and particulate matter (PM) in the fumes emitted from heated soybean oils with different refining levels were characterized, and their health risks were assessed. Results demonstrated that the concentration range of aldehydes and ketones (from 328.06 ± 24.64 to 796.52 ± 29.67 µg/m3), PAHs (from 4.39 ± 0.19 to 7.86 ± 0.51 µg/m3), and PM (from 0.36 ± 0.14 to 5.08 ± 0.15 mg/m3) varied among soybean oil with different refining levels, respectively. The neutralized oil showed the highest concentration of aldehydes and ketones, whereas the refined oil showed the lowest. The highest concentration levels of PAHs and PM were observed in fumes emitted from crude oil. A highly significant (p < 0.001) positive correlation between the acid value of cooking oil and the concentrations of PM was found, suggesting that removing free fatty acids is critical for mitigating PM concentration in cooking fumes. Additionally, the incremental lifetime cancer risk (ILCR) values of PAHs and aldehydes were 5.60 × 10-4 to 8.66 × 10-5 and 5.60 × 10-4 to 8.66 × 10-5, respectively, which were substantially higher than the acceptable levels (1.0 × 10-6) established by US EPA. The present study quantifies the impact of edible oil refining on hazardous compound emissions and provides a theoretical basis for controlling the health risks of cooking fumes via precise edible oil processing.

An Artificial Olfactory System Based on a Memristor Can Simulate Organ Injury and Functions in Air Purification.

Artificial olfactory systems are receiving increasing attention because of their potential applications in humanoid robots, artificial noses, and the next generation of human-computer interactions. However, simulating the human olfactory system, which recognizes, remembers, and automatically takes protective measures against gases, remains a challenge. In this paper, a WO3-TiO2@Ag NPs (silver nanoparticle) gas sensor was prepared by the sol-gel method, and an Al/pectin:AgNP/ITO memristor was prepared by spin coating and vacuum evaporation. The gas sensor has been combined with the memristor to simulate physical damage to humans in a dangerous gas environment for a long time, and an artificial olfactory system is constructed by field-programmable gate array external control. The WO3-TiO2@Ag NPs gas sensor can sense and identify ethanol vapor through changes in resistance, and the signal transmitted to the pectin-based memristor can switch the resistance state of the memristor to store gas information. Furthermore, the activation of the memristor can also trigger rotation of the fan to purify the gas and reduce damage caused by excessive exposure to dangerous gases. This artificial olfactory system provides a promising strategy for the development of artificial intelligence and human-computer interaction systems.

Assessment of a 50:50 mixture of two Bacillus subtilis strains as growth promoters for finishing pigs: productivity improvement and noxious gas reduction.

In this study, we aimed to assess the potential of a 50:50 mixture of two Bacillus subtilis strains in improving the productivity and health of finishing pigs and reducing noxious gases in their feces. These strains were found to abundantly secrete surfactin which has been shown to alleviate the effects of lipopolysaccharides in vitro. For the 10-wk experiment, 200 finishing pigs ([Landrace × Yorkshire] × Duroc) with an average body weight of 54.15 ±â€…1.70 kg were divided into four groups. Each group was fed with a basal diet supplemented with an equal amount of spores from the two B. subtilis strains at different levels: control group, no addition; treatment group 1, 0.5 × 109; treatment group 2, 1.0 × 109; treatment group 3, 1.5 × 109 cfu·kg-1 addition. During the 10-wk feeding period, dietary supplementation of 0.5 × 109, 1.0 × 109, and 1.5 × 109 cfu·kg-1 of the spore cells from these two strains resulted in a 0.9%, 1.9%, and 2.5% increase in body weight, respectively (linear P < 0.095). During the final 5 wk, the average daily gain (ADG) in weight was increased by the strains at amounts of 0.5 × 109, 1.0 × 109, and 1.5 × 109 cfu·kg-1 with a clear dosage effect (linear P < 0.05). However, neither the gain-to-feed ratio, the average daily feed intake, nor nutrient digestibility was affected by the supplementation. In blood, the endotoxin lipopolysaccharides, and two liver toxicity indicator enzymes; aspartate aminotransferase and lactate dehydrogenase were decreased (P < 0.05) in the 1.0 × 109 cfu·kg-1 spores-feeding group. Furthermore, four noxious gases were reduced by 8 to 20% in feces excreted by pigs fed with 1.5 × 109 cfu·kg-1 spores with a linear dosage effect (linear P < 0.001 to 0.05) during the final 5 wk. Our findings suggest that the mixture of B. subtilis strains may enhance the productivity of finishing pigs by reducing the risk of mild endotoxemia, rather than increasing digestibility or daily feed intake. Therefore, these Bacillus strains have the potential to act as growth promoters for pigs, leading to improved animal health and productivity. These results have significant implications for pig farmers seeking to optimize the health and growth of their animals.

In a previous study, we discovered two new strains of Bacillus subtilis that showed high surfactin secretion during growth in culture media. This surfactin proved effective in reducing endotoxin effects, particularly lipopolysaccharides, in vitro. To explore their potential as pig growth promoters, we administered 50:50 bacteria blend to 200 finishing pigs, dividing them into four groups for a 10-wk trial. Results showed that supplementing the pigs' diet with 0.5, 1.0, or 1.5 billion bacteria per kilogram led to weight gains of 0.9%, 1.9%, and 2.5%, respectively, with a dosage effect. The weight gain was notably higher during the final 5 wk. However, there were no significant differences in feed intake or nutrient digestibility. Blood analysis revealed reduced lipopolysaccharides and liver toxicity indicators, suggesting improved animal health. Moreover, the pigs that received the bacterial mixture showed reduced noxious gas levels in their feces with a dosage effect. These findings suggest that these new B. subtilis strains could serve as effective growth promoters for pigs by minimizing the risk of mild endotoxemia, leading to enhanced animal health and productivity. These results could have valuable implications for pig farmers seeking to optimize the health and growth of their animals.

Tailoring the porosity of chemically activated carbons derived from the HTC treatment of sewage sludge for the removal of pollutants from gaseous and aqueous phases.

The management of sewage sludge is currently an open issue due to the large volume of waste to be treated and the necessity to avoid incineration or landfill disposal. Hydrothermal carbonization (HTC) has been recognized as a promising thermochemical technique to convert sewage sludge into value-added products. The hydrochar (HC) obtained can be suitable for environmental application as fuel, fertilizer, and sorbent. In this study, activated hydrochars (AHs) were prepared from sewage sludge through HTC followed by chemical activation with potassium hydroxide (KOH) and tested for the removal of pollutants in gaseous and aqueous environments, investigating carbon dioxide (CO2) and ciprofloxacin (CIP) adsorption capacity. The effects of activation temperature (550-750 °C) and KOH/HC impregnation ratio (1-3) on the produced AHs morphology and adsorption capacity were studied by Response Surface Methodology (RSM). The results of RSM analysis evidenced a maximum CO2 uptake of 71.47 mg/g for mild activation conditions (600-650 °C and KOH/HC = 1 ÷ 2), whereas the best CIP uptake of 628.61 mg/g was reached for the most severe conditions (750 °C, KOH/HC = 3). The prepared AHs were also applied for the removal of methylene blue (MB) from aqueous solutions, and the MB uptake results were used for estimating the specific surface area of AHs. High surface areas up to 1902.49 m2/g were obtained for the highest activation temperature and impregnation ratio investigated. Predictive models of CO2 and CIP uptake were developed by RSM analysis, and the optimum activation conditions for maximizing the adsorption performance together with high AH yield were identified: 586 °C and KOH/HC ratio = 1.34 for maximum yield (26.33 %) and CO2 uptake (67.31 mg/g); 715 °C and KOH/HC ratio = 1.78 for maximum yield (18.75 %) and CIP uptake (370.77 mg/g). The obtained results evidenced that chemical activation of previously HTC-treated sewage sludge is a promising way to convert waste into valuable low-cost adsorbents.

Influence of diluent on antimicrobial activity of cinnamon bark essential oil vapor against Staphylococcus aureus and Salmonella enterica on a laboratory medium and beef jerky.

The influence of chemical diluents on the antimicrobial activity of plant essential oil (EO) vapors was evaluated. We first determined if vapors generated from 22 chemical diluents not containing EO had antimicrobial activities. Ethyl ether vapor retarded the growth of S. aureus. The minimal inhibitory concentrations (MICs) and the minimal lethal concentrations (MLCs) of cinnamon bark EO vapor, which was diluted in and generated from 21 diluents, against S. aureus and S. enterica were determined. Cinnamon bark EO vapor showed significantly (P ≤ 0.05) lower MICs against S. aureus when diluted in dimethyl sulfoxide (DMSO), ethanol, ethyl acetate, or jojoba oil, and against S. enterica when diluted in DMSO, ethanol, or jojoba oil, compared to those in other diluents. We compared antimicrobial activities of cinnamon bark EO vapor diluted in DMSO, ethanol, ethyl acetate, or jojoba oil against S. aureus and S. enterica on beef jerky as a food model. Antimicrobial activity was significantly (P ≤ 0.05) higher when vaporized from DMSO. These results indicate that antimicrobial activity of cinnamon bark EO vapor may vary significantly (P ≤ 0.05) depending on the type of diluent from which it is vaporized. These observations provide basic information when developing food and food-contact surface decontamination strategies using EO vapors.

A comprehensive assessment of mechanical and environmental properties of green concretes produced using recycled concrete aggregates and supplementary cementitious material.

This study aims to present a multi-perspective evaluation of green concretes produced using supplementary cementitious material and recycled concrete aggregates and to balance the reduction in compressive strength values caused by using recycled concrete aggregates with silica fume. For these purposes, statistical analyses were performed on the response surface method using the data of 9 reference and 27 green concrete series mixtures, and mathematical models were developed to predict the compressive strength with high accuracy. Then, energy consumption, global warming potential, and waste generation were taken into account from the environmental impact categories, and the environmental impact scores obtained were compared in detail to examine the impact of the use of silica fume and recycled concrete aggregates on sustainable development. Significant reductions in energy consumption and global warming potential values with the use of silica fume and waste generation values with the use of recycled concrete aggregates were achieved, and it was seen that supplementary cementitious material and recycled concrete aggregates are of great importance in terms of sustainable development. It was seen that these waste materials could be utilized, especially in regions with high earthquake risk, and that these waste materials are of great importance.

Synthesis of ZnO Nanoflower Arrays on a Protrusion Sapphire Substrate and Application of Al-Decorated ZnO Nanoflower Matrix in Gas Sensors.

In this study, we utilized a sapphire substrate with a matrix protrusion structure as a template. We employed a ZnO gel as a precursor and deposited it onto the substrate using the spin coating method. After undergoing six cycles of deposition and baking, a ZnO seed layer with a thickness of 170 nm was formed. Subsequently, we used a hydrothermal method to grow ZnO nanorods (NRs) on the aforementioned ZnO seed layer for different durations. ZnO NRs exhibited a uniform outward growth rate in various directions, resulting in a hexagonal and floral morphology when observed from above. This morphology was particularly evident in ZnO NRs synthesized for 30 and 45 min. Due to the protrusion structure of ZnO seed layer, the resulting ZnO nanorods (NRs) displayed a floral and matrix morphology on the protrusion ZnO seed layer. To further enhance their properties, we utilized Al nanomaterial to decorate the ZnO nanoflower matrix (NFM) using a deposition method. Subsequently, we fabricated devices using both undecorated and Al-decorated ZnO NFMs and deposited an upper electrode using an interdigital mask. We then compared the gas-sensing performance of these two types of sensors towards CO and H2 gases. The research findings indicate that sensors based on Al-decorated ZnO NFM exhibit superior gas-sensing properties compared to undecorated ZnO NFM for both CO and H2 gases. These Al-decorated sensors demonstrate faster response times and higher response rates during the sensing processes.

Development of a Long-Term Sampling Method for Determination of NMHCs in Indoor Air.

Vapor intrusion is detrimental for indoor air quality. One of the most common sources of vapor intrusion is soil contaminated with petroleum hydrocarbons. To evaluate the long-term risk from individual exposure to hydrocarbons it is necessary to measure quantitively and reliably an average concentration level of individual pollutants on a monthly or yearly basis. Temporal variability of vapor intrusion from hydrocarbons poses a significant challenge to determination of average exposure and there is a need for reliable long-term integrative sampling. To this end, an analytical method for determination of 10 selected nonmethane hydrocarbons (NMHCs), including hexane, heptane, octane, decane, benzene, toluene, ethyl-benzene, m,p-xylene, o-xylene, and naphthalene, sampled on active triple-bed tubes filled with Carbograph 2, Carbograph 1, and Carboxen 1003 adsorbents was developed and validated. Extensive laboratory studies proved the absence of breakthrough at 50% HR and ambient temperature for experiments lasting up to 28 days and established a safe sampling time/volume of 20 days/114 L when sampling at a low flow rate of around 4 mL min-1. In addition, the developed method includes detailed uncertainty calculations for determination of concentrations. Finally, the method was tested by measuring NMHC concentrations in indoor air at a former industrial site during a 2-month-long field campaign in Lyon. The results of the field campaign suggest that 4-week integrated concentration measurements can be achieved by using active sampling on triple-bed tubes at 4.5 mL min-1.

Biological effects of inhaled crude oil vapor. III. Pulmonary inflammation, cytotoxicity, and gene expression profile.

OBJECTIVE: Workers may be exposed to vapors emitted from crude oil in upstream operations in the oil and gas industry. Although the toxicity of crude oil constituents has been studied, there are very few in vivo investigations designed to mimic crude oil vapor (COV) exposures that occur in these operations. The goal of the current investigation was to examine lung injury, inflammation, oxidant generation, and effects on the lung global gene expression profile following a whole-body acute or sub-chronic inhalation exposure to COV. MATERIALS AND METHODS: To conduct this investigation, rats were subjected to either a whole-body acute (6 hr) or a sub-chronic (28 d) inhalation exposure (6 hr/d × 4 d/wk × 4 wk) to COV (300 ppm; Macondo well surrogate oil). Control rats were exposed to filtered air. One and 28 d after acute exposure, and 1, 28, and 90 d following sub-chronic exposure, bronchoalveolar lavage was performed on the left lung to collect cells and fluid for analyses, the apical right lobe was preserved for histopathology, and the right cardiac and diaphragmatic lobes were processed for gene expression analyses. RESULTS: No exposure-related changes were identified in histopathology, cytotoxicity, or lavage cell profiles. Changes in lavage fluid cytokines indicative of inflammation, immune function, and endothelial function after sub-chronic exposure were limited and varied over time. Minimal gene expression changes were detected only at the 28 d post-exposure time interval in both the exposure groups. CONCLUSION: Taken together, the results from this exposure paradigm, including concentration, duration, and exposure chamber parameters, did not indicate significant and toxicologically relevant changes in markers of injury, oxidant generation, inflammation, and gene expression profile in the lung.

Vapor-phase biodegradation and natural attenuation of petroleum VOCs in the unsaturated zone: A microcosm study.

Traditional natural attenuation studies focus on aqueous process in the saturated zone while vapor-phase biodegradation and natural attenuation in the unsaturated zone received much less attention. This study used microcosm experiments to explore the vapor-phase biodegradation and natural attenuation of 23 petroleum VOCs in the unsaturated zone including 7 monoaromatic hydrocarbons, 6 n-alkanes, 4 cycloalkanes, 3 alkylcycloalkanes and 3 fuel ethers. We found that monoaromatic hydrocarbon vapors were easily attenuated with significantly high first-order attenuation rates (9.48 d-1-43.20 d-1) in live yellow earth, of which toluene and benzene had the highest rates (43.20 d-1 and 28.32 d-1, respectively). The 13 aliphatic hydrocarbons and 3 fuel ethers all have relatively low attenuation rates (<0.54 d-1) in live soil and negligible biodegradation contribution. We explored the effects of soil types (black soil, yellow earth, lateritic red earth and quartz sand), soil moisture (2, 5, 10, and 17 wt%) contents and temperatures (4, 15, 25, 35 and 45 °C) on the vapor attenuation. Results showed that increasing soil organic matter (SOM) content, silt content, porosity and soil microorganism numbers enhanced contaminant attenuation and remediation efficiency. Increasing moisture content reduced the apparent first-order biodegradation rates of monoaromatic hydrocarbon vapors. The vapor-phase biodegradation had optimal temperature (∼25 °C in yellow earth) and increasing or decreasing temperature slowed down biodegradation rate. Overall, this study enhanced our understanding of vapor-phase biodegradation and natural attenuation of petroleum VOCs in the unsaturated zone, which is critical for the long-term management and remediation of petroleum contaminated site.

A review of hydrogen chloride removal from calcium- and sodium-based sorbents.

With the steady progress of ultra-low emissions in various industries, the management of unconventional pollutants is gradually attracting attention. A such unconventional pollutant that negatively affects many different processes and pieces of equipment is hydrogen chloride (HCl). Although it has strong advantages and potential in the treatment of industrial waste gas and synthesis gas, the process technology of removing HCl by calcium- and sodium-based alkaline powder has not yet been thoroughly studied. The impact of reaction factors on the dechlorination of calcium- and sodium-based sorbents is reviewed, including temperature, particle size, and water form. The most recent developments in sodium- and calcium-based sorbents for capturing hydrogen chloride were presented, and the dechlorination capabilities of various sorbents were contrasted. In the low-temperature range, sodium-based sorbents had a stronger dechlorination impact than calcium-based sorbents. Surface chemical reactions and product layer diffusion between solid sorbents and gases are crucial mechanisms. Meanwhile, the effect of the competitive behavior of SO2 and CO2 with HCl on the dechlorination performance has been taken into account. The mechanism and necessity of selective hydrogen chloride removal are also provided and discussed, and future research directions are pointed out to provide the theoretical basis and technical reference for future industrial practical applications.

Phase partitioning of mercury, arsenic, selenium, and cadmium in Chlamydomonas reinhardtii and Arthrospira maxima microcosms.

As the global human population increases, demand for protein will surpass our current production ability without an increase in land use or intensification. Microalgae cultivation offers a high yield of protein, and utilization of wastewater from municipal or agricultural sources in place of freshwater for microalgae aquaculture may increase the sustainability of this practice. However, wastewater from municipal and agricultural sources may contain contaminants, such as mercury (Hg), cadmium (Cd), selenium (Se), and arsenic (As). Association of these elements with algal biomass may present an exposure risk to product consumers, while volatilization may present an exposure hazard to industry workers. Thus, the partitioning of these elements should be evaluated before wastewater can be confidently used in an aquaculture setting. This study explored the potential for exposure associated with Arthrospira maxima and Chlamydomonas reinhardtii aquaculture in medium contaminated with 0.33 µg Hg L-1, 60 µg As L-1, 554 µg Se L-1, and 30 µg Cd L-1. Gaseous effluent from microalgae aquaculture was analyzed for Hg, As, Se, and Cd to quantify volatilization. A mass balance approach was used to describe the partitioning of elements between the biomass, medium, and gas phases at the end of exponential growth. Contaminants were recovered predominantly in medium and biomass, regardless of microalgae strain. In the case of Hg, 48 ± 2% was associated with A. maxima biomass and 55 ± 8% with C. reinhardtii when Hg was present as the only contaminant, but this increased to 85 ± 11% in C. reinhardtii biomass when As, Se, and Cd were also present. A small and highly variable abiotic volatilization of Hg was observed in the gas phase of both A. maxima and C. reinhardtii cultures. Evidence presented herein suggests that utilizing wastewater containing Hg, Cd, Se, and As for microalgae cultivation may present health hazards to consumers.

Effect of high volume enema in children with abdominal pain: Pediatric emergency department experience.

BACKGROUND: Abdominal pain is one of the most common reasons for admission to the pediatric emergency clinic. The appropriate evaluation of clinical and laboratory clues to make the correct diagnosis is of great importance in terms of directing the treatment medically or surgically and preventing unnecessary investigations. The aim of our study was to evaluate the contribution of high-volume enema application among pediatric patients with abdominal pain in terms of clinical and radiological findings. METHODS: Among the pediatric patients who applied to the pediatric emergency clinic of our hospital between January 2020 and July 2021 with abdominal pain, those who had intense gas stool image on abdominal X-ray and abdominal distension on physical examination and who underwent high-volume enema treatment were included in the study. The physical examination and radiological findings of these patients were evaluated. RESULTS: During the study period, 7819 patients were admitted to the pediatric emergency outpatient clinic with abdominal pain. Classic enema was performed in 3817 of these patients who had a dense gaseous stool image and abdominal distention on abdominal X-ray graphy. Defecation occurred in 3498 (91.6%) of 3817 patients who underwent classical enema, and the complaints regressed after enema. High-volume enema was applied to 319 (8.4%) patients who did not find relief with classical enema. Complaints of 278 (87.1%) patients regressed after the high-volume enema. Control ultrasonography (US) was performed in the remaining 41 (12.9%) patients, 14 (34.1%) patients were diagnosed with appendicitis. US results of 27 (65.9%) patients who had repeated US were evaluated as normal. CONCLUSION: High volume enema treatment is an effective and safe method in children with abdominal pain who are unresponsive to classical enema application in the pediatric emergency department.