Maximizing the extraction yield of plant gum exudate using response surface methodology and artificial neural networking and pharmacological characterization.

Prunus armeniaca gum is used as food additive and ethno medicinal purpose. Two empirical models response surface methodology and artificial neural network were used to search for optimized extraction parameters for gum extraction. A four-factor design was implemented for optimization of extraction process for maximum yield which was obtained under the optimized extraction parameter (temperature, pH, extraction time, and gum/water ratio). Micro and macro-elemental composition of gum was determined by using laser induced breakdown spectroscopy. Gum was evaluated for toxicological effect and pharmacological properties. The maximum predicted yield obtained by response surface methodology and artificial neural network was 30.44 and 30.70% which was very close to maximum experimental yield 30.23%. Laser induced breakdown spectroscopic spectra confirmed the presence Calcium, Potassium, Magnesium, Sodium, Lithium, Carbon, Hydrogen, Nitrogen and Oxygen. Acute oral toxicity study showed that gum is non-toxic up to 2000 mg/Kg body weight in rabbits, accompanied by high cytotoxic effects of gum against HepG2 and MCF-7cells by MTT assay. Overall, Aqueous solution of gum showed various pharmacological activities with significant value of antioxidant, antibacterial, anti-nociceptive, anti-cancer, anti-inflammatory and thrombolytic activities. Thus, optimization of parameters using mathematical models cans offer better prediction and estimations with enhanced pharmacological properties of extracted components.

Structure-function relationship of licorice (Glycyrrhiza glabra) root extract-xanthan/guar gum mixture in a high sugar content system.

BACKGROUND: Foam-gels are one of the most important multicomponent-model systems in aerated confectionery, and an investigation of their microstructure is desirable. In this research, the structure-function relationship of xanthan gum/guar gum (XG/GG) and licorice (Glycyrrhiza glabra) root extract powder (LEP) was investigated in a high-sugar medium. Foam-gel systems were prepared at 4:10% to 8:20% ratios of LEP to biopolymer. RESULTS: The results show that increasing the LEP content reduced both the melting point and enthalpy, probably due to higher overrun and weaker junctions. Boosting the XG/GG ratio led the enhancement of mechanical properties, whereas increasing the LEP concentration weakened all textural parameters, which could be due to the poor structure of the network in the presence of the foaming agent, increased moisture content and overrun. In the whipped mixture samples containing 10 g kg-1 XG/GG, higher foaming capacity was observed. By increasing the level of biopolymers, smaller and more uniform air cells were formed according to a scanning electron microscopical study. At higher concentration of LEP, smaller bubbles and increased porosity were seen, which could be attributed to the availability of surfactant in the interfacial layer. CONCLUSION: Maximum structural strength was achieved at a 4:20 ratio of LEP to XG/GG. In rheological experiments, pseudoplastic behavior was seen in all samples. Generally, this model system can be simulated for other herbal extracts containing natural surfactants such as saponins. Achieving a more detailed understanding of these structures and their interactions could help in formulating novel food products. © 2021 Society of Chemical Industry.

The Short-Term Effects and Tolerability of Low-Viscosity Soluble Fibre on Gastroparesis Patients: A Pilot Clinical Intervention Study.

Gastroparesis is a motility disorder that causes severe gastric symptoms and delayed gastric emptying, where the majority of sufferers are females (80%), with 29% of sufferers also diagnosed with Type-1 or Type-2 diabetes. Current clinical recommendations involve stringent dietary restriction and includes the avoidance and minimization of dietary fibre. Dietary fibre lowers the glycaemic index of food, reduces inflammation and provides laxation. Lack of dietary fibre in the diet can affect long-term gastrointestinal health. Our previously published rheological study demonstrated that "low-viscosity" soluble fibres could be a potentially tolerable source of fibre for the gastroparetic population. A randomised controlled crossover pilot clinical study was designed to compare Partially-hydrolysed guar gum or PHGG (test fibre 1), gum Arabic (test fibre 2), psyllium husk (positive control) and water (negative control) in mild-to-moderate symptomatic gastroparesis patients (requiring no enteral tube feeding). The principal aim of the study was to determine the short-term physiological effects and tolerability of the test fibres. In n = 10 female participants, post-prandial blood glucose, gastroparesis symptoms, and breath test measurements were recorded. Normalized clinical data revealed that test fibres PHGG and gum Arabic were able to regulate blood glucose comparable to psyllium husk, while causing far fewer symptoms, equivalent to negative control. The test fibres did not greatly delay mouth-to-caecum transit, though more data is needed. The study data looks promising, and a longer-term study investigating these test fibres is being planned.

Progresses in chitin, chitosan, starch, cellulose, pectin, alginate, gelatin and gum based (nano)catalysts for the Heck coupling reactions: A review.

Heck cross-coupling reaction (HCR) is one of the few transition metal catalyzed CC bond-forming reactions, which has been considered as the most effective, direct, and atom economical synthetic method using various catalytic systems. Heck reaction is widely employed in numerous syntheses including preparation of pharmaceutical and biologically active compounds, agrochemicals, natural products, fine chemicals, etc. Commonly, Pd-based catalysts have been used in HCR. In recent decades, the application of biopolymers as natural and effective supports has received attention due to their being cost effective, abundance, and non-toxicity. In fact, recent studies demonstrated that biopolymer-based catalysts had high sorption capacities, chelating activities, versatility, and stability, which make them potentially applicable as green materials (supports) in HCR. These catalytic systems present high stability and recyclability after several cycles of reaction. This review aims at providing an overview of the current progresses made towards the application of various polysaccharide and gelatin-supported metal catalysts in HCR in recent years. Natural polymers such as starch, gum, pectin, chitin, chitosan, cellulose, alginate and gelatin have been used as natural supports for metal-based catalysts in HCR. Diverse aspects of the reactions, different methods of preparation and application of polysaccharide and gelatin-based catalysts and their reusability have been reviewed.

Anti-inflammatory and hepatoprotective cembranoid alcohols from the Gum Resin of Boswellia carterii.

Five undescribed cembranoid alcohols, boscartinols A-E (1-5) were discovered from the gum resin of Boswellia carterii. Their structures were elucidated by analyzing the spectroscopic data. Notably, all these five compounds preserved an isopropyl type cembranoid skeleton, featured the same groups of one epoxy ring at C1-C12 and one hydroxy group at C-11, as well as two double bonds migrating from C3 to C9 and one hydroxy group from C3 to C8 within the cembranoid structure. These cembranoids were evaluated for the hepatoprotective and anti-inflammatory activities using two cell models of APAP-induced HepG2 and LPS-induced RAW 264.7. For hepatoprotective activity, compounds 1 and 5 showed remarkable hepatoprotective activity (inhibition rate of 51.6% and 39.8%, respectively) at 10 µM, with the other three compounds of 2-4 showing less potently hepatoprotective. For anti-inflammatory activity, compounds 2-4 showed significant inhibitory effects on NO produced by LPS-induced RAW 264.7 cell (IC50 values of 13.40 µM, 7.08 µM and 14.26 µM), with the other two compounds of 1 and 5 showing less potently anti-inflammatory activities.

Fabrication and characterization of novel antibacterial chitosan/dialdehyde guar gum hydrogels containing pomegranate peel extract for active food packaging application.

This study aimed to investigate synthesis and structural characteristics of the chitosan (CS) - modified dialdehyde guar gum (DAGG) hydrogel through the Schiff base reaction. The highest swelling capacity was achieved as about 12,000% of dry weight of the freeze-dried powder at CS: DAGG hydrogel with the mixing ratio of 30:70. The swelling ratio was not affected by changes in pH, which could be considered as an important property in the control of moisture in absorbent pad. The FTIR results indicated that the new amide groups have been formed at 1680 cm-1, which can be attributed to the covalent bond between the amide groups of CS and the aldehyde groups of GG. Based on a SEM image, the prepared hydrogel showed the porous structure so it verified the crosslinking formation between the two polymers. Rheological analyses confirmed that formation compact and porous structure led to some noteworthy improvements in the strength of hydrogel prepared with a high ratio of DAGG. The hydrogel loaded with 5% pomegranate peel extract (PPE) showed both good antioxidant (81.13%) and antimicrobial activities. The hydrogel was observed to have a good potential to be used as an antibacterial pad.

Superabsorbent Hydrogels Based to Polyacrylamide/Cashew Tree Gum for the Controlled Release of Water and Plant Nutrients.

Agricultural production is influenced by the water content in the soil and availability of fertilizers. Thus, superabsorbent hydrogels, based on polyacrylamide, natural cashew tree gum (CG) and potassium hydrogen phosphate (PHP), as fertilizer and water releaser were developed. The structure, morphology, thermal stability and chemical composition of samples of polyacrylamide and cashew tree gum hydrogels with the presence of fertilizer (HCGP) and without fertilizer (HCG) were investigated, using X-ray diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA/DTG) and Energy Dispersive Spectroscopy (EDS). Swelling/reswelling tests, textural analysis, effect of pH, release of nutrients and kinetics were determined; the ecotoxicity of the hydrogels was investigated by the Artemia salina test. The results showed that PHP incorporation in the hydrogel favored the crosslinking of chains. This increased the thermal stability in HCGP but decreased the hardness and adhesion properties. The HCGP demonstrated good swelling capacity (~15,000 times) and an excellent potential for reuse after fifty-five consecutive cycles. The swelling was favored in an alkaline pH due to the ionization of hydrophilic groups. The sustained release of phosphorus in HCGP was described by the Korsmeyer-Peppas model, and Fickian diffusion is the main fertilizer release mechanism. Finally, the hydrogels do not demonstrate toxicity, and HCGP has potential for application in agriculture.

Comparative HPTLC fingerprinting profile and GC-MS analysis of raw and purified Guggulu (Commiphora wightii. Arn. Bhand) by Ayurvedic purification method.

BACKGROUND: Guggulu is an oleo gum resin obtained from the plant Commiphora wightii (Arn.) Bhand., used in Ayurved ic medicines for various ailments like anti-inflammatory conditions, hyperlipidemia, thyroid disorders etc. Guggulsterones E & Z are responsible for these broad ranges of pharmacological actions. It is recommended to do Shodhana (purification) before incorporating it into medicinal formulations. Sahasrayoga, an Ayurvedic text, emphasizes the purification of Guggulu in a particular media, which is a long run practice in Kerala. OBJECTIVES: To compare the physicochemical and phytochemical parameters, quantitative estimation of Guggulsterone E & Z using high performance thin layer chromatography (HPTLC) and qualitative gas chromatography-mass spectrometry (GC-MS) analysis of Guggulu before and after purification. METHODS: Shodhana of Guggulu was performed in Water boiled with crushed fresh leaves of Neem (Azadirachta indica) and fresh rhizome of turmeric (Curcuma longa) using a special equipment (Dolayantra). Preliminary physicochemical and phytochemical evaluation, quantification of Guggulsterones E & Z using HPTLC and GC-MS analysis of raw and purified Guggulu were performed. RESULTS: Phytochemical evaluation of metabolites revealed marked variations. The mean concentrations of Guggulsterone E & Z showed significant differences before and after purification (p<0.01). On GC-MS analysis, it was found that few new compounds were added in the purified Guggulu. CONCLUSIONS: Therapeutic efficacy of Guggulu might have enhanced after traditional purification.

Phosphorylation of Guar Gum/Magnetite/Chitosan Nanocomposites for Uranium (VI) Sorption and Antibacterial Applications.

The development of new materials is needed to address the environmental challenges of wastewater treatment. The phosphorylation of guar gum combined with its association to chitosan allows preparing an efficient sorbent for the removal of U(VI) from slightly acidic solutions. The incorporation of magnetite nanoparticles enhances solid/liquid. Functional groups are characterized by FTIR spectroscopy while textural properties are qualified by N2 adsorption. The optimum pH is close to 4 (deprotonation of amine and phosphonate groups). Uptake kinetics are fast (60 min of contact), fitted by a pseudo-first order rate equation. Maximum sorption capacities are close to 1.28 and 1.16 mmol U g-1 (non-magnetic and magnetic, respectively), while the sorption isotherms are fitted by Langmuir equation. Uranyl desorption (using 0.2 M HCl solutions) is achieved within 20-30 min; the sorbents can be recycled for at least five cycles (5-6% loss in sorption performance, complete desorption). In multi-component solutions, the sorbents show marked preference for U(VI) and Nd(III) over alkali-earth metals and Si(IV). The zone of exclusion method shows that magnetic sorbent has antibacterial effects against both Gram+ and Gram- bacteria, contrary to non-magnetic material (only Gram+ bacteria). The magnetic composite is highly promising as antimicrobial support and for recovery of valuable metals.

Bioactive Triterpenes of Protium heptaphyllum Gum Resin Extract Display Cholesterol-Lowering Potential.

Hypercholesterolemia is one of the major causes of cardiovascular disease, the risk of which is further increased if other forms of dyslipidemia occur. Current therapeutic strategies include changes in lifestyle coupled with drug administration. Statins represent the most common therapeutic approach, but they may be insufficient due to the onset of resistance mechanisms and side effects. Consequently, patients with mild hypercholesterolemia prefer the use of food supplements since these are perceived to be safer. Here, we investigate the phytochemical profile and cholesterol-lowering potential of Protium heptaphyllum gum resin extract (PHE). Chemical characterization via HPLC-APCI-HRMS2 and GC-FID/MS identified 13 compounds mainly belonging to ursane, oleanane, and tirucallane groups. Studies on human hepatocytes have revealed how PHE is able to reduce cholesterol production and regulate the expression of proteins involved in its metabolism. (HMGCR, PCSK9, LDLR, FXR, IDOL, and PPAR). Moreover, measuring the inhibitory activity of PHE against HMGR, moderate inhibition was recorded. Finally, molecular docking studies identified acidic tetra- and pentacyclic triterpenoids as the main compounds responsible for this action. In conclusion, our study demonstrates how PHE may be a useful alternative to contrast hypercholesterolemia, highlighting its potential as a sustainable multitarget natural extract for the nutraceutical industry that is rapidly gaining acceptance as a source of health-promoting compounds.

Plant-Based Gums and Mucilages Applications in Pharmacology and Nanomedicine: A Review.

Gums are carbohydrate biomolecules that have the potential to bind water and form gels. Gums are regularly linked with proteins and minerals in their construction. Gums have several forms, such as mucilage gums, seed gums, exudate gums, etc. Plant gums are one of the most important gums because of their bioavailability. Plant-derived gums have been used by humans since ancient times for numerous applications. The main features that make them appropriate for use in different applications are high stabilization, viscosity, adhesive property, emulsification action, and surface-active activity. In many pharmaceutical formulations, plant-based gums and mucilages are the key ingredients due to their bioavailability, widespread accessibility, non-toxicity, and reasonable prices. These compete with many polymeric materials for use as different pharmaceuticals in today's time and have created a significant achievement from being an excipient to innovative drug carriers. In particular, scientists and pharmacy industries around the world have been drawn to uncover the secret potential of plant-based gums and mucilages through a deeper understanding of their physicochemical characteristics and the development of safety profile information. This innovative unique class of drug products, useful in advanced drug delivery applications, gene therapy, and biosynthesis, has been developed by modification of plant-based gums and mucilages. In this review, both fundamental and novel medicinal aspects of plant-based gums and mucilages, along with their capacity for pharmacology and nanomedicine, were demonstrated.

Nanoemulsion and emulsion vitamin D3 fortified edible film based on quince seed gum.

In this research, emulsions and nanoemulsions containing two concentrations of vitamin D were added to quince seed gum film and its properties were examined. Incorporation of emulsified oil droplets to the films structure was confirmed by FTIR. It was observed that presence of emulsion and nanoemulsion in the films, increased their thickness, opacity, and hydrophobicity and interaction of the gum chains with water molecules was decreased and so, water vapor permeability, water solubility, and moisture content decreased. Due to the penetration of oil molecules to the chain, the resultant films had higher elongation at break and lower tensile strength. SEM micrographs of samples showed instability of the oil droplets within the matrix. Vitamin content during 14 days of storage showed that it was more stable at lower concentration and in the nanoemulsion compared to emulsion. So, quince seed gum films containing vitamin can be introduces as an ideal edible packaging.

Electrosprayed cashew gum microparticles for the encapsulation of highly sensitive bioactive materials.

This study focuses on the production and characterization of electrosprayed cashew gum (CG) microparticles that encapsulate ß-carotene. CG is an inexpensive, non-toxic polysaccharide obtained from Anacardium occidentale trees. Encapsulation of ß-carotene in CG was performed by electrospraying from two emulsion formulations (water : oil ratios 80:20 and 90:10 (v/v)) in which the dispersed phase consisted of ß-carotene dissolved in castor oil, and the continuous phase was a CG aqueous solution. Spherical particles with smooth surface and medium size between 3 and 6 µm were obtained. The particles produced from the 90:10 (v/v) emulsion showed a loading capacity of 0.075 ± 0.006 % and a minor amount of extractable ß-carotene, 10.75 ± 2.42 %. ATR-FTIR confirmed the absence of interaction between the particles' components. CG demonstrated to offer thermoprotection, and photoprotection for short periods of time. These results make CG a viable candidate to encapsulate bioactive compounds via electrospraying for agricultural, food and pharmaceutical applications.

Effect of Octenyl Succinic Anhydride (OSA) Modified Starches on the Rheological Properties of Dough and Characteristic of the Gluten-Free Bread.

The study focused on the influence of starch modified by octenyl succinic anhydride (OSA) on the rheological and thermal properties of gluten-free dough containing corn and potato starch with the addition of pectin and guar gum as structure-forming substances. The starch blend used in the original dough recipe was partially (5% to 15%) replaced with OSA starch. The rheological properties of dough samples were determined, and the properties of the resulting bread were analyzed. It was found that the dough samples behaved as weak gels, and the values of storage and loss moduli (G' and G″, respectively) significantly depended on angular frequency. Various shares of OSA starch in recipes modified dough in different ways, causing changes in its rheological characteristics. The introduction of OSA starch preparations resulted in changes in the bread volume and physical characteristics of the crumb. All the applied preparations caused an increase in bread porosity and the number of pores larger than 5 mm, and there was a parallel decrease in pore density. The presence of OSA starch preparations modified bread texture depending on the amount and type of the applied preparation. The introduction of OSA starches in gluten-free bread formulation caused a significant drop in the enthalpy of retrograded amylopectin decomposition, indicating a beneficial influence of such type of additive on staling retardation in gluten-free bread.

Development and characterization of active and pH-sensitive films based on psyllium seed gum incorporated with free and microencapsulated mulberry pomace extracts.

Intelligent packaging with a pH indicator has been a hot research topic due to its extra active role compared with traditional ones. Considering the possible toxicity of synthetic pH sensitive pigments, natural pigments are promising alternative indicators. This work aimed to develop and characterize active and pH sensitive films based on psyllium seed gum (PSG) incorporated with free and microencapsulated mulberry pomace extracts (MPE). Compared with PSG control film, PSG-MPE films showed an increase in total phenolic content and DPPH scavenging activity, and decrease in surface hydrophobicity, lightness, and tensile strength. The molecular interactions between PSG and MPE were confirmed by thermal and microstructure analysis. Moreover, PSG-MPE films displayed wide color differences from red to blue at pH 2.0 - 12.0. PSG-based films containing 10% free and microencapsulated MPE demonstrated better overall performance and economy in packaging applications, which could be used as promising active and pH-sensitive food packaging materials.

Tea polyphenols encapsulated in W/O/W emulsions with xanthan gum-locust bean gum mixture: Evaluation of their stability and protection.

Herein, improvement of the stability of the water-in-oil-in-water (W/O/W) emulsions by addition of xanthan gum (XG)/locust bean gum (LBG) mixture in the inner water phase was aimed. The impact of XG/LBG mixture on the physical stability, microstructure and rheological properties of W/O/W emulsions was investigated. It was found that, compared with the control emulsions, the presence of XG/LBG mixture could improve the stability of W/O/W emulsions against coalescence. The tea polyphenols (TPPs) and XG/LBG mixture were simultaneously included in the internal aqueous phase of the double emulsion and stored at 25 and 40 °C in the dark for 28 d. The results showed that XG/LBG mixture not only had a protective role for TPPs encapsulated in the internal water phase, but also maintained more than 50% of the antioxidant capacity of TPPs.

Applications of emerging botanical hydrocolloids for edible films: A review.

In recent years, many studies have been conducted on the production of edible films from emerging gums, which are mostly made from botanical sources. However, each one interacts differently with the film compounds, producing films with different properties that may improve or hinder their utilization in food packaging. Therefore, the aim of this review was to investigate and compare the physical, mechanical, thermal and structural properties of edible films produced with these emerging gums. The results of this review showed that it is possible to produce edible films with desirable physical, mechanical and thermal properties by optimizing the amounts and type of compounds in film formulations such as plasticizers, nanoparticles, lipid compounds, crosslinkers and combination of gums with other biopolymers. The future trends of this research include the deepening of knowledge to understand the molecular structures of emerging gums and to address the shortcomings of films based on these gums for their industrial-scale application in food packaging.

The stabilizing and prebiotic potential of water-soluble phase of bitter almond gum exudate in probiotic yogurt drink.

Yogurt drinks can potentially be an appropriate medium for delivering probiotics to consumers. This study investigated the influences of the water-soluble fraction of bitter almond gum (SBAG) and its conjugate with sodium caseinate (SBAG-SC) compared to carboxymethylcellulose (CMC) and inulin, respectively, on the physical stability of casein micelles and the viability of the probiotic culture (Lactobacillus acidophilus La-5) in probiotic yogurt drink during cold storage. The addition of SBAG-SC conjugate to the drinks successfully prevented phase separation for a longer time than CMC. CMC-based drinks exhibited a strong shear-thinning response. Adding SBAG helped keep Lactobacillus acidophilus La-5 viable above the recommended level for probiotic products. However, the SBAG showed relatively less prebiotic property than inulin. This study demonstrated that SBAG-SC conjugate has a high potential for stabilizing applications in yogurt and yogurt products.

Spectroscopic, mineral, and antioxidant characteristics of blue colored powders prepared from cornflower aqueous extracts.

The present study aimed to prepare blue colored powders from an aqueous extract of cornflower petals. Low temperature (4 °C) aqueous extraction (1:20) and microencapsulation by freeze-drying were performed. A mixture of stabilizers (maltodextrin, guar gum, and lecithin) in a proportion of 10% to the amount of extract was used. The results indicated that the addition of 2% and 4% guar gum to maltodextrin (8-6%) significantly increased the efficiency of the process, but 4% guar gum caused the formation of amorphous particles; therefore, 2% guar gum addition was found to be the most optimal. The FT-IR and FT-Raman band characteristics for guar gum, lecithin, and maltodextrin dominated over those for anthocyanins contained in the powders made from cornflower petals. The blue powders had total phenolic content of 19.5-26.6 mg GAE/g DW. The antioxidant activity of the prepared powders measured by ABTS, CHEL, OH, and RED was high.

Chemical composition and biological effects of three different types (tear, paste, and mass) of bitter Ferula assa-foetida Linn. gum.

Ferula assa-foetida gum oleoresin (FAGO) is traditionally used for treatment of different ailments. The subject of this article was to evaluate the chemical composition and antibacterial effects of the different types of bitter FAGO essential oils in the natural habitat of Southwest Iran. α-pinene (38.2%), and (Z)-propenyl sec-butyl disulfide (12.4%) were the main components of F. assa-foetida tear type essential oil, with high antibacterial, anti-biofilm and cytotoxic activities, followed by paste and mass types, respectively. α-pinene (27.8%), and (Z)-propenyl-sec-butyl disulfide (24.2%) were identified as main components of paste type. α-pinene (33.4%), ß-pinene (16.3%), and (Z)-propenyl sec-butyl disulfide (16.1%) were the main components of asafoetida mass type gum oleoresin essential oil. FAGO essential oil specially tear one could serve as suitable candidate for further studies.