Effect of Ozonated Water on the Color Stability of Denture Teeth and Heat Polymerized Acrylic Base Resin

Abstract Objective: To determine the effect of ozonated water on the color stability of denture tooth and denture bases. Material and Methods: Thirty denture base discs consisting of 15 Acropars and 15 ProBase Hot specimens with the dimensions of 40 × 5 mm were prepared. Fifteen denture teeth in shade A1 (Ivoclar Vivadent, Schaan, Liechtenstein) were mounted in a specific acrylic jig. All specimens were immersed in three solutions (1% sodium hypochlorite, ozonated water, and distilled water) for four months (one year of clinical use). Color measurements were done with a spectrophotometer and assessed using the CIE L*a*b* colorimetric system (0, 4, 8, 12, and 16 weeks). Data were analyzed using the three-way ANOVA and Tukey test (α=0.05). Results: Tukey's post hoc test revealed a significant change in color in the Acropars denture base for the distilled water group compared to the ozonated water and 1% hypochlorite (p<0.05). Regarding the ProBase Hot denture base, significantly less color change was observed in the 1% hypochlorite group compared to the ozonated water and distilled water (p≤0.001). For the denture teeth, significantly less color change was seen in the distilled water group than in the ozonated water (p=0.015) and 1% hypochlorite (p<0.05) groups. Conclusion: The color change of denture bases and denture tooth in ozonated water are acceptable. Ozonated water can be considered a good disinfectant for cleaning dentures.

Effect of staining and denture cleaning on color stability of differently polymerized denture base acrylic resins.

BACKGROUND: Denture hygiene is an important factor to remove dental plaque and discoloration, to provide optimal oral health, and to prevent denture stomatitis. AIM: The purpose of this study was to evaluate the effect of coffee staining and denture cleaner on the color stability of two differently polymerized (heat and microwave) denture acrylic resin in vitro. MATERIALS AND METHODS: Two commonly used denture base acrylic resins and effervesecnt tablet form denture cleaner were used in this study. Disc-shaped specimens from each acrylic resin were polymerized according to the manufacturer's instructions (n = 7). Color values were recorded before and after immersion in distilled water (I), denture cleaner (II), coffee (III), and coffee + denture cleaner (IV) with a tristimulus colorimeter using CIEDE2000 color difference formula. Two-way analysis of variance (ANOVA) and Fisher's least significant difference tests were used for multiple comparisons at a 95% confidence level (P < 0.05). Surface topography of the acrylic resin denture base specimens before and after immersion were taken under 500 × magnification. RESULTS: The two-way ANOVA revealed significant interactions between denture base resins and solutions (P < 0.001). Immersion in denture cleaner and coffee solution caused significant color changes in acrylic resin denture bases. CONCLUSION: Heat- and microwave-polymerized acrylic denture base resins can show different color stability. Immersion in coffee and denture cleaner solutions can cause noticeable color changes.