Effectiveness of oolong tea and simethicone solution for lens cleansing during colonoscopy: A double-blinded randomized study.

BACKGROUND AND AIMS: water is an imperfect agent for lens cleansing during endoscopy due to its incompetence to clean hydrophobic dirt, whereas amphiphilic surfactants have the potential to overcome the limitation of water. The trial was aimed to evaluate the cleansing effectiveness of 2 typical surfactants (simethicone solution and oolong tea) for colonoscopic lens. METHODS: Oolong tea (O-), low concentration simethicone solution (S1-), high concentration simethicone solution (S2-) and distilled water (D-) were used as washing solutions for colonoscopic lens. Study I: The tip of the colonoscope was immersed in lard oil in order to simulate the blur, and photographs were taken toward a standard colonoscopy image in-vitro pre- and post- each cleansing procedure. The blurred areas of each image were quantified and compared. Study II: 395 consecutive patients who were due to colonoscopy examination were enrolled and randomized into O-, S2-, D-group. The volume of washing solution used and cleansing level during the examination procedure, adenoma and polyp detected per colonoscopy, insertion time and withdraw time were analyzed. RESULTS: Study I: There were no differences in 4 groups for the blurred areas on images before lens cleansing. The blurred areas after lens cleansing were significantly smaller in 3 groups (O- 8.47 ±â€Š20.91 vs S1- 13.06 ±â€Š10.71 vs S2- 6.76 ±â€Š8.49 vs D- 38.24 ±â€Š29.69, P < .05) than water. The decline range of blurred areas after lens cleansing in oolong tea, low concentration simethicone solution, high concentration simethicone solution groups were significantly higher than that in distilled water group (O- 87.35 ±â€Š20.81 vs S1- 78.12 ±â€Š19.24 vs S2- 89.57 ±â€Š8.50 vs D- 53.39 ±â€Š28.45, P < .05). Study II: The volume of washing solution used in S2-group was significantly smaller than that in O-group and D-group. The cleansing level of the colonoscopic lens of O-group was significantly superior than that of S2-group and D-group. CONCLUSIONS: The in-vitro test showed oolong tea and simethicone solution can effectively cleans the colonoscopic lens. The clinical trial demonstrated that oolong tea instead of water is effective to provide better visualization during colonoscopy.Registration: Chictr.org.cn No: ChiCTR1900025606.

Avaliação imunológica promovida pelo consumo de kombucha em camundongos diabéticos / Immunologic evaluation promoted by the consumption of kombucha in diabetic mice

O kombucha é uma bebida fermentada tradicional, originária da China, preparada pela fermentação de chá preto adoçado com cultura mista de bactérias e leveduras chamada Simbiotic Culture of Bacteria and Yeast (SCOBY). Tem sido alegado que o mesmo possui propriedades funcionais, tais como recuperação ou manutenção de peso corporal, atividade antihiperglicêmica, entre outras. Por não existirem estudos suficientes que as comprovem, este trabalho teve por objetivo avaliar a influência do consumo de kombucha como tratamento alternativo para amenizar e/ou retardar sintomas e complicações do Diabetes Mellitus e identificar as possíveis modificações metabólicas, morfológicas e imunológicas ocorridas em camundongos com diabetes tipo 1. De acordo com os resultados obtidos, observou-se que, apesar de ter havido recuperação de massa corpórea próxima daquela que se tinha antes da indução da diabetes, esse efeito não foi exclusivo do kombucha e, embora a influência no controle glicêmico tenha sido maior nos camundongos normoglicêmicos que diabéticos, acredita-se que a administração por um período prolongado pudesse indicar melhores resultados, uma vez que as avaliações histológicas e morfométricas do intestino demonstraram resultados satisfatórios quanto ao aumento da superfície de mucosa e diminuição do infiltrado inflamatório, favorecendo a modulação imunológica. Logo, considera-se necessária a realização de mais trabalhos para comprovação da capacidade funcional do kombucha e elucidação de sua eficácia enquanto tratamento exclusivo e/ou complementar do diabetes

Kombucha is a traditional Chinese fermented beverage prepared by fermenting sweetened black tea with mixed bacterial and yeast culture called Simbiotic Culture of Bacteria and Yeast (SCOBY). It has been claimed that it has functional properties such as body weight recovery or maintenance, antihyperglycemic activity, among others. Because there are not enough studies to prove them, this study aimed to evaluate the influence of kombucha consumption as an alternative treatment to alleviate and/or delay symptoms and complications of Diabetes Mellitus and to identify possible metabolic, morphological and immunological changes in mice with type 1 diabetes. According to the results obtained, it was observed that, although there was a recovery of body mass close to the one obtained before diabetes induction, this effect was not unique to kombucha, and although the influence on glycemic control was greater in normoglycemic rather than diabetic mice, it is believed that administration over a prolonged period could indicate better results, since histological and morphometric evaluations of the intestine showed satisfactory results in terms of mucosal surface enlargement and decreased inflammatory infiltrate, favoring immune modulation. . Therefore, further work is considered necessary to prove the functional capacity of kombucha and to elucidate its effectiveness as an exclusive and / or complementary treatment of diabetes

Identification of the human factors contributing to maintenance failures in a petroleum operation.

OBJECTIVE: This research aimed to identify the most frequently occurring human factors contributing to maintenance-related failures within a petroleum industry organization. Commonality between failures will assist in understanding reliability in maintenance processes, thereby preventing accidents in high-hazard domains. BACKGROUND: Methods exist for understanding the human factors contributing to accidents. Their application in a maintenance context mainly has been advanced in aviation and nuclear power. Maintenance in the petroleum industry provides a different context for investigating the role that human factors play in influencing outcomes. It is therefore worth investigating the contributing human factors to improve our understanding of both human factors in reliability and the factors specific to this domain. METHOD: Detailed analyses were conducted of maintenance-related failures (N = 38) in a petroleum company using structured interviews with maintenance technicians. The interview structure was based on the Human Factor Investigation Tool (HFIT), which in turn was based on Rasmussen's model of human malfunction. RESULTS: A mean of 9.5 factors per incident was identified across the cases investigated.The three most frequent human factors contributing to the maintenance failures were found to be assumption (79% of cases), design and maintenance (71%), and communication (66%). CONCLUSION: HFIT proved to be a useful instrument for identifying the pattern of human factors that recurred most frequently in maintenance-related failures. APPLICATION: The high frequency of failures attributed to assumptions and communication demonstrated the importance of problem-solving abilities and organizational communication in a domain where maintenance personnel have a high degree of autonomy and a wide geographical distribution.

[Security management and maintenance of medical hyperbaric oxygen chamber].

In this article, based on years of working experience, the author briefly analyzes eight issues for security management and maintenance of medical hyperbaric oxygen chamber, according to the relevant laws, regulations, standards and norms, which can be a reference in this area.

Ergonomics in designing process: dialogue between designers, executors and users in the maintenance activity of radars in an oil refinery.

This paper aims to discuss the role of ergonomics in design process using the dialogue developed by designers, implementers and users in an oil refinery. It was possible to identify the need of minimizing the postural constraints, risk of accidents, mechanical shocks and to enlarge safety perception in the access and permanency of the users at the workspace. It has been determined and validated by workers and managers to implement different deadlines depending on programming, viability and execution time for the improvements proposed. In a long-term: it was proposed the substitution of the ladders with time planning according to the maintenance program of the tanks; in a short-time: it was suggested the expansion of the existing platforms, implementation of a walkway connection provided with guardrails between the upper access of the side ladder and the repositioning of radar set and aerial aiming at the usage by workers at the workstation of the new platform. It was also elaborated eight typologies of intervention, according to the request, type of tank, material stored, and its setting place. The design process arises from ergonomics workplace analysis that presents concepts for solutions which was a mediator tool to be settled between users and implementers.

Security management and maintenance of medical hyperbaric oxygen chamber / 中国医疗器械杂志

In this article, based on years of working experience, the author briefly analyzes eight issues for security management and maintenance of medical hyperbaric oxygen chamber, according to the relevant laws, regulations, standards and norms, which can be a reference in this area.

[Multimag chronomagnetotherapy system life cycle maintenance].

Seven stages of high-technology medical equipment life cycle are described. The Multimag chronomagnetotherapy system is used as an example to trace the implementation of the seven stages of the system life cycle by a collaboration team from Ryazan State Radio Engineering University and Kasimov Instrument-Making Plant.

[Risk assessment in preparation for production of POLIMAG-01 device].

The procedure used by medical equipment developer for assessing the risks involved in operation and maintenance of medical equipment is described. Methods for risk assessment and management are delineated. An example of the procedure implementation is given.

Variation in calibration of hand-held ultraviolet (UV) meters for psoralen plus UVA and narrow-band UVB phototherapy.

BACKGROUND: Phototherapy units should regularly use hand-held ultraviolet (UV) meters to assess the output of treatment lamps, and these meters should be accurately calibrated. Several medical physics departments in the U.K. can calibrate UV meters traceable to national standards, but there is concern that there may be disagreement among departments. In particular, there may be difficulty in calibration for narrow-band UVB phototherapy lamps (TL-01). OBJECTIVES: To ascertain the level of agreement in UV meter calibration at expert centres in the U.K., and to survey methodology at these centres, consider sources of errors and to make recommendations on calibration methods. METHODS: The same UV meter with two detectors (for UVA and UVB) was calibrated by seven medical physics departments. A questionnaire on methods was also distributed and measured spectral outputs from each centre were examined. RESULTS: The calibration factors for the meter varied by +/- 18% for the UVA detector and by +/- 60% for the UVB detector (2 standard deviations). Six centres performed calibration using a spectroradiometer and one centre used a reference meter method. The spectra of lamps used for calibration were similar. For the spectroradiometric methods there were some differences in methodology and instrumentation that may account for the differences in calibration factors. CONCLUSIONS: UV meter calibration in the U.K. shows unacceptable variability, particularly for TL-01 lamps. An accuracy of around of +/- 10% would be clinically acceptable and should be technically achievable.

Here we go again!

New CPT procedure codes are added annually (quarterly for Category II and Category III codes), definitions of existing codes are changed, and codes we have memorized are often deleted and replaced. In addition, guidelines for code assignment are constantly revised and may be altered based upon individual insurance payer interpretation. Remember, a code must accurately represent the service performed, and a code that is "close" to the procedure performed cannot be assigned. If the service performed is not defined by an existing procedure code (CPT Category I, II, III or HCPCS Level II), then an unlisted procedure code must be used. The forms and guidelines to request new codes or changes to procedure code descriptors are currently located on the American Medical Association website in the "CPT Process" section (www.ama-assn.org/ama/ pub/category/3112.html).

Instrument for scanning the angular variation of irradiance in ultraviolet phototherapy cabinets.

An instrument is described that measures irradiance and the angular distribution of the intensity of ultraviolet radiation sources inside phototherapy cabinets. Failed lamps and lamps with higher or lower outputs are readily identified. The measurements are controlled from outside the cabinet, thus reducing the risk to staff from exposure to ultraviolet radiation.

Analysis of ultraviolet phototherapy and photochemotherapy resources in Ireland.

BACKGROUND: Ultraviolet (UV) phototherapy is widely used and very successful in the treatment of skin conditions. As such a safe and efficient service is essential. At present, there are no standard Irish guidelines regarding the operation, calibration or inspection of UV equipment nor is there an Irish policy on staff/patient safety or training issues. AIM: To survey all known phototherapy centres in Ireland. METHODS: A postal questionnaire was sent to all known phototherapy centres in Ireland addressed to the consultant dermatologist or the physiotherapist-in-charge. It was divided into six sections: Instrumentation, Quality Assurance, UV meters, equipment maintenance, patient/staff safety and training. Comments on current practice were invited. Non-respondents were contacted by telephone, in some cases the survey was mailed a second time. RESULTS: This study demonstrated a substantial quantity of suboptimal equipment in use and a lack of consensus regarding quality assurance inspection and UV meter calibration frequency. CONCLUSIONS: Guidelines must be established for calibration of UV equipment and standardisation of phototherapy protocols in Ireland.

[To be effective and not harmful, ragweed-trimming methods should be rigorous]. / Pour être efficaces et non nocives, les modalités de tonte de l'Ambroisie doivent être rigoureuses.

We decided to undertake the experiments dedicated to the height of Ragweed cutting. The experiment was focused on transplanted plants of Ragweed two months earlier to study the growth of male spikes. It took place near Lyon, on the second part of July 2000. We proved with the experiment that the number of male spikes produced is, to a significant extent, much more important when the height of cutting back is 10 cm instead of 5 cm. Moreover, to inhale or to be in contact with airborne matters because of Ragweed was at the origin of allergic symptoms for the author that was not atopic. It explains that Ragweed is a pollutant agent when inhaled in large quantities. Therefore, during the eradication campaign--last two weeks of July--it results better to cut back Ragweed close as possible to the ground. From spring to mid-July it is imperative not to abrade ground whereas after this period it is not really an essential point. Moreover, Ragweed has not enough grown to be cut with a mower or an edge so cutting back deals with other types of vegetal cover.

Monitoring of lead exposure among mechanics in Bangkok.

Lead is an important heavy metal used in many industrial processes. It plays an important role in the pathogenesis of both acute and chronic toxicity. Mechanics have a high risk of benzene exposure but tend to be a forgotten occupational group in Thailand. In this study, monitoring of lead exposure by anodic stripping voltammetry (ASV) determination of blood lead levels was conducted for 69 subjects (29 control subjects and 40 mechanics). The mean blood lead level in the control group was 6.59 +/- 1.98 microg/dl. The mean blood lead level in the mechanics was 11.24 +/- 5.82 microg/dl. There was a significant difference between the two groups (p < 0.05). Based on this study, consideration of the prevention of exposure to lead among mechanics as a public health strategy is recommended.

Cerebral arterial gas embolism in air force ground maintenance crew--a report of two cases.

Two cases of cerebral arterial gas embolism (CAGE) occurred after a decompression incident involving five maintenance crew during a cabin leakage system test of a Hercules C-130 aircraft. During the incident, the cabin pressure increased to 8 in Hg (203.2 mm Hg, 27 kPa) above atmospheric pressure causing intense pain in the ears of all the crew inside. The system was rapidly depressurized to ground level. After the incident, one of the crew reported chest discomfort and fatigue. The next morning, he developed a sensation of numbness in the left hand, with persistence of the earlier symptoms. A second crewmember, who only experienced earache and heaviness in the head after the incident, developed retrosternal chest discomfort, restlessness, fatigue and numbness in his left hand the next morning. Both were subsequently referred to a recompression facility 4 d after the incident. Examination by the Diving Medical Officer on duty recorded left-sided hemianesthesia and Grade II middle ear barotrauma as the only abnormalities in both cases. Chest X-rays did not reveal any extra-alveolar gas. Diagnoses of Static Neurological Decompression Illness were made and both patients recompressed on a RN 62 table. The first case recovered fully after two treatments, and the second case after one treatment. Magnetic resonance imaging (MRI) of the brain and bubble contrast echocardiography performed on the first case 6 mo after the incident were reported to be normal. The second case was lost to follow-up. Decompression illness (DCI) generally occurs in occupational groups such as compressed air workers, divers, aviators, and astronauts. This is believed to be the first report of DCI occurring among aircraft's ground maintenance crew.