Improving water quality and mitigating CH4 and N2O production in urban landscape water simultaneously by optimizing calcium peroxide dosage.

Recent studies show that greenhouse gas (GHG) emissions from urban landscape water are significant and cannot be overlooked, underscoring the need to develop effective strategies for mitigating GHG production from global freshwater systems. Calcium peroxide (CaO2) is commonly used as an eco-friendly reagent for controlling eutrophication in water bodies, but whether CaO2 can reduce GHG emissions remains unclear. This study investigated the effects of CaO2 dosage on the production of methane (CH4) and nitrous oxide (N2O) in urban landscape water under anoxic conditions during summer. The findings reveal that CaO2 addition not only improved the physicochemical and organoleptic properties of simulated urban landscape water but also reduced N2O production by inhibiting the activity of denitrifying bacteria across various dosages. Moreover, CaO2 exhibited selective effects on methanogens. Specifically, the abundance of acetoclastic methanogen Methanosaeta and methylotrophic methanogen Candidatus_Methanofastidiosum increased whereas the abundance of the hydrogenotrophic methanogen Methanoregula decreased at low, medium, and high dosages, leading to higher CH4 production at increased CaO2 dosage. A comprehensive multi-objective evaluation indicated that an optimal dosage of 60 g CaO2/m2 achieved 41.21 % and 84.40 % reductions in CH4 and N2O production, respectively, over a 50-day period compared to the control. This paper not only introduces a novel approach for controlling the production of GHGs, such as CH4 and N2O, from urban landscape water but also suggests a methodology for optimizing CaO2 dosage, providing valuable insights for its practical application.

Glutathione Supplementation Prevents Neonatal Parenteral Nutrition-Induced Short- and Long-Term Epigenetic and Transcriptional Disruptions of Hepatic H2O2 Metabolism in Guinea Pigs.

The parenteral nutrition (PN) received by premature newborns is contaminated with peroxides that induce global DNA hypermethylation via oxidative stress. Exposure to peroxides could be an important factor in the induction of chronic diseases such as those observed in adults who were born preterm. As endogenous H2O2 is a major regulator of glucose-lipid metabolism, our hypothesis was that early exposure to PN induces permanent epigenetic changes in H2O2 metabolism. Three-day-old guinea pigs were fed orally (ON), PN or glutathione-enriched PN (PN+GSSG). GSSG promotes endogenous peroxide detoxification. After 4 days, half the animals were sacrificed, and the other half were fed ON until 16 weeks of age. The liver was harvested. DNA methylation and mRNA levels were determined for the SOD2, GPx1, GCLC, GSase, Nrf2 and Keap1 genes. PN induced GPx1 hypermethylation and decreased GPx1, GCLC and GSase mRNA. These findings were not observed in PN+GSSG. PN+GSSG induced Nrf2 hypomethylation and increased Nrf2 and SOD2 mRNA. These observations were independent of age. In conclusion, in neonatal guinea pigs, PN induces epigenetic changes, affecting the expression of H2O2 metabolism genes. These changes persist for at least 15 weeks after PN. This disruption may signify a permanent reduction in the capacity to detoxify peroxides.

Peroxymonosulfate activation by nanocomposites towards the removal of sulfamethoxazole: Performance and mechanism.

Heterogeneous activation of peroxomonosulfate (PMS) has been extensively studied for the degradation of antibiotics. The cobalt ferrite spinel exhibits good activity in the PMS activation, but suffers from the disadvantage of low PMS utilization efficiency. Herein, the nanocomposites including FeS, CoS2, CoFe2O4 and Fe2O3 were synthesized by hydrothermal method and used for the first time to activate PMS for the removal of sulfamethoxazole (SMX). The nanocomposites showed superior catalytic activity in which the SMX could be completely removed at 40 min, 0.1 g L-1 nanocomposites and 0.4 mM PMS with the first order kinetic constant of 0.2739 min-1. The PMS utilization efficiency was increased by 29.4% compared to CoFe2O4. Both radicals and non-radicals contributed to the SMX degradation in which high-valent metal oxo dominated. The mechanism analysis indicated that sulfur modification, on one hand, enhanced the adsorption of nanocomposites for PMS, and promoted the redox cycles of Fe2+/Fe3+ and Co2+/Co3+ on the other hand. This study provides new way to enhance the catalytic activity and PMS utilization efficiency of spinel cobalt ferrite.

Wet peroxide oxidation process catalyzed by Cu/Al2O3: phenol degradation and Cu2+ dissolution behavior.

Catalytic wet peroxide oxidation (CWPO) has become an important deep oxidation technology for organics removal in wastewater treatments. Supported Cu-based catalysts belong to an important type of CWPO catalyst. In this paper, two Cu catalysts, namely, Cu/Al2O3-air and Cu/Al2O3-H2 were prepared and evaluated through catalytic degradation of phenol. It was found that Cu/Al2O3-H2 had an excellent catalytic performance (TOC removal rate reaching 96%) and less metal dissolution than the Cu/Al2O3-air case. Moreover, when the organic removal rate was promoted at a higher temperature, the metal dissolution amounts was decreased. Combined with hydroxyl radical quenching experiments, a catalytic oxidation mechanism was proposed to explain the above-mentioned interesting behaviors of the Cu/Al2O3-H2 catalyst for CWPO. The catalytic test results as well as the proposed mechanism can provide better guide for design and synthesis of good CWPO catalysts.

Magnetically Controlled Photothermal, Colorimetric, and Fluorescence Trimode Assay for Gastric Cancer Exosomes Based on Acid-Induced Decomposition of CP/Mn-PBA DSNBs.

The accurate quantification of cancer-derived exosomes, which are emerging as promising noninvasive biomarkers for liquid biopsies in the early diagnosis of cancer, is becoming increasingly imperative. In our work, we developed a magnetically controlled photothermal, colorimetric, and fluorescence trimode aptasensor for human gastric cancer cell (SGC-7901)-derived exosomes. This sensor relied on CP/Mn-PBA DSNBs nanocomposites, created by decorating copper peroxide (CP) nanodots on polyethyleneimine-modified manganese-containing Prussian blue analogues double-shelled nanoboxes (PEI-Mn-PBA DSNBs). Through self-assembly, we attached CD63 aptamer-labeled CP/Mn-PBA DSNBs (Apt-CP/Mn-PBA DSNBs) to complementary DNA-labeled magnetic beads (cDNA-MB). During exosome incubation, these aptamers preferentially formed complexes with exosomes, and we efficiently removed the released CP/Mn-PBA DSNBs by using magnetic separation. The CP/Mn-PBA DSNBs exhibited high photoreactivity and photothermal conversion efficiency under near-infrared (NIR) light, leading to temperature variations under 808 nm irradiation, correlating with different exosome concentrations. Additionally, colorimetric detection was achieved by monitoring the color change in a 3,3',5,5'-tetramethylbenzidine (TMB) system, facilitated by PEI modification, NIR-enhanced peroxidase-like activity of CP/Mn-PBA DSNBs and their capacity to generate Cu2+ and H2O2 under acidic conditions. Moreover, in the presence of Cu2+ and ascorbic acid (AA), DNA sequences could form dsDNA-templated copper nanoparticles (CuNPs), which emitted strong fluorescence at around 575 nm. Increasing exosome concentrations correlated with decreases in temperature, absorbance, and fluorescence intensity. This trimode biosensor demonstrated satisfactory ability in differentiating gastric cancer patients from healthy individuals using human serum samples.

Investigating the Quality and Purity Profiles of Olive Oils from Diverse Regions in Selçuk, Izmir.

The Selçuk district of Izmir is one of the most essential regions in terms of olive oil production. In this study, 60 olive oil samples were obtained from five different locations (ES: Eski Sirince Yolu, KK: Kinali Köprü, AU: Abu Hayat Üst, AA: Abu Hayat Alt, and DB: Degirmen Bogazi) in the Selçuk region of Izmir during two (2019-2020 and 2020-2021) consecutive cropping seasons. Quality indices (free acidity, peroxide value, p-Anisidine value, TOTOX, and spectral absorption at 232 and 270 nm) and the fatty acid, phenolic, and sterol profiles of the samples were determined to analyze the changes in the composition of Selcuk olive oils according to their growing areas. When the quality criteria were analyzed, it was observed that KK had the lowest FFA (0.11% oleic acid, PV (6.66 meq O2/kg), p-ANV (11.95 mmol/kg), TOTOX (25.28), and K232 (1.99) values and K270 had the highest value. During the assessment of phenolic profiles, the ES group exhibited the highest concentration of the phenolic compound p-HPEA-EDA (oleocanthal), with a content of 93.58 mg/kg, equivalent to tyrosol. Upon analyzing the fatty acid and sterol composition, it was noted that AU displayed the highest concentration of oleic acid (71.98%) and ß-sitosterol (87.65%). PCA analysis illustrated the distinct separation of the samples, revealing significant variations in both sterol and fatty acid methyl ester distributions among oils from different regions. Consequently, it was determined that VOOs originating from the Selçuk region exhibit distinct characteristics based on their geographical locations. Hence, this study holds great promise for the region to realize geographically labeled VOOs.

Fenton-like membrane reactor assembled by electron polarization and defect engineering modifying Co3O4 spinel for flow-through removal of organic contaminants.

The application of Fenton-like membrane reactors for water purification offers a promising solution to overcome technical challenges associated with catalyst recovery, reaction efficiency, and mass transfer typically encountered in heterogeneous batch reaction modes. This study presents a dual-modification strategy encompassing electron polarization and defect engineering to synthesize Al-doped and oxygen vacancies (OV)-enriched Co3O4 spinel catalysts (ACO-OV). This modification empowered ACO-OV with exceptional performance in activating peroxymonosulfate (PMS) for the removal of organic contaminants. Moreover, the ACO-OV@polyethersulfone (PES) membrane/PMS system achieved organic contaminant removal through filtration (with a reaction kinetic constant of 0.085 ms-1), demonstrating outstanding resistance to environmental interference and high operational stability. Mechanistic investigations revealed that the exceptional catalytic performance of this Fenton-like membrane reactor stemmed from the enrichment of reactants, exposure of reactive sites, and enhanced mass transfer within the confined space, leading to a higher availability of reactive species. Theoretical calculations were conducted to validate the beneficial intrinsic effects of electron polarization, defect engineering, and the confined space within the membrane reactor on PMS activation and organic contaminant removal. Notably, the ACO-OV@PES membrane/PMS system not only mineralized the targeted organic contaminants but also effectively mitigated their potential environmental risks. Overall, this work underscores the significant potential of the dual-modification strategy in designing spinel catalysts and Fenton-like membrane reactors for efficient organic contaminant removal.

Gas chromatography ion mobility spectroscopy: A rapid and effective tool for monitoring oil oxidation.

Oil autoxidation is an early process of food deterioration, monitoring oil oxidation is therefore of great significance to ensure food quality and safety. In this study, a detection method of the primary and secondary oxidative products was developed by gas chromatography ion mobility spectrometry (GC-IMS).The secondary oxidative products was analyzed by GC-IMS. Then, the relationships between peroxide values and the contents of secondary oxidative products were investigated by constructing a prediction model of peroxide value of rapeseed oil with the help of secondary oxidative products and chemometrics. The coefficient of determination Q2 of the model validation set is 0.96, and the RMSECV is 0.1570 g/100 g. These validation results indicated that secondary oxidative products could also reflect the content of the primary oxidative products. Moreover, 10 characteristic markers related to oxidative rancidity were identified for monitoring edible oil rancidity and oxidative stability.

Combining lanthanum-modified bentonite and calcium peroxide to enhance phosphorus removal from lake sediments.

Lanthanum-modified bentonite (LMB) and calcium peroxide (CP) are known for their effective removal phosphorus (P) capacities. The present study aims to investigate the effects of the combined use of LMB and CP（LMB + CP）on the sediment P, dissolved organic matter (DOM) and iron (Fe) concentrations through a 90-day incubation experiment. The combined treatment showed strong removal effects on sediment P and DOM. Indeed, the SRP and DOM concentrations in the 0-10 cm sediment layer decreased following the combined application of LMB and CP by 40.67 and 28.95%, respectively, compared to those of the control group (CK). In contrast, the HCl-P in the 0-5 cm sediment layer increased following the combined treatment by 13.28%. In addition, compared with the single application of LMB, the LMB + CP treatment significantly reduced the soluble Fe (Ⅱ) in the sediment pore water and promoted the oxidation of Fe. Therefore, LMB + CP can enhance the removal of internal P from sediments. The DOM removal and Fe oxidation in sediment pore waters are beneficial for enhancing the adsorption of P by LMB. On the other hand, the single and combined applications of LMB and CP increased the richness of the sediment microbial communities while exhibiting slight effects on their diversity. According to the results of this study, the combined use of LMB and oxidizing materials represents a novel method for treating lakes with high internal phosphorus and DOM loads in sediments.

A novel method for determination of peroxide value and acid value of extra-virgin olive oil based on fluorescence internal filtering effect correction.

Peroxide value (PV) and acid value (AV) are widely used indicators for evaluating oxidation degree of olive oils. Fluorescence spectroscopy has been extensively studied on the detection of oil oxidation, however, the detection accuracy is limited due to internal filtering effect (IFE). Due to the primary and secondary IFE, at least two wavelengths of absorption information are required. Least squares support vector regression (LSSVR) models for PV and AV were established based on two absorption coefficients (µa) at 375 nm and emission wavelength and one fluorescence intensity at corresponding wavelength. The regression results proved that the model based on 375 and 475 nm could reach the best performance, with the highest correlation coefficient for prediction (rp) of 0.889 and 0.960 for PV and AV respectively. Finally, the explicit formulations for PV and AV were determined by nonlinear least squares fitting, and the rp could reach above 0.94 for two indicators.

Effect of enzymatic Maillard reaction conditions on physicochemical properties, nutrition, fatty acids composition and key aroma compounds of fragrant rapeseed oil.

BACKGROUND: A new enzymatic hydrolysis-based process inspired by the Maillard reaction can produce strong flavored, high-value rapeseed oil that meets safety requirements. In the present study, the effect of reaction time (10-30 min) and temperature (130-160 °C) on the physicochemical properties, nutritional status, fatty acids composition and key aroma compounds of fragrant rapeseed oil (FRO) was investigated. RESULTS: An increasing reaction time and temperature substantially decreased the total tocopherol, polyphenol and sterol contents of FRO, but increased benzo[a]pyrene content, as well as the acid and peroxide values, which did not exceed the European Union legislation limit. Among the volatile components, 2,5-dimethyl was the main substance contributing to the barbecue flavor of FRO. The 150 °C for 30 min reaction conditions produced a FRO with a strong, fragrant flavor, with high total tocopherol (560.15 mg kg-1 ), polyphenol (6.82 mg kg-1 ) and sterol (790.65 mg kg-1 ) contents; acceptable acid (1.60 mg g-1 ) and peroxide values (4.78 mg g-1 ); and low benzo[a]pyrene (1.39 mg g-1 ) content. These were the optimal conditions for the enzymatic Maillard reaction, according to the principal component analysis. Furthermore, hierarchical cluster analysis showed that reaction temperature had a stronger effect on FRO than reaction time. CONCLUSION: The optimal enzymatic Maillard reaction conditions for the production of FRO are heating at 150 °C for 30 min. These findings provide new foundations for better understanding the composition and flavor profile of FRO, toward guiding its industrial production. © 2023 Society of Chemical Industry.

Contribution of 1O2 in the efficient degradation of organic pollutants with Cu0/Cu2O/CuO@N-C activated peroxymonosulfate: A Case study with tetracycline.

Peroxymonosulfate-mediated advanced oxidation processes (PMS-AOPs) degrading organic pollutants (Tetracycline (TC) as an example) in water with singlet oxygen (1O2) as the main reactive oxygen has received more and more attention. However, the generation mechanism of 1O2 is still unclear. Consequently, this study investigates the 1O2 formation mechanism during the activated PMS process using a nitrogen-copper-loaded carbon-based material (Cu0/Cu2O/CuO@N-C), synthesized by thermally decomposing organobase-modified HKUST-1 via a one-pot method. It was discovered that incorporating an organobase (Benzylamine) into the metal organic framework (MOF) precursor directs the MOF's self-assembly process and supplements its nitrogen content. This modification modulates the Nx-Cu-Oy active site formation in the material, selectively producing 1O2. Additionally, 1O2 was identified as the dominant reactive oxygen species in the Cu0/Cu2O/CuO@N-C-PMS system, contributing to TC degradation with a rate of 70.82%. The TC degradation efficiency remained high in the pH range of 3-11 and sustained its efficacy after five consecutive uses. Finally, based on the intermediates of TC degradation, three possible degradation pathways were postulated, and a reduction in the ecotoxicity of the degradation products was predicted. This work presents a novel and general strategy for constructing nitrogen-copper-loaded carbon-based materials for use in PMS-AOPs.

Enrichment of a fruit-based smoothie beverage with omega-3 fatty acids from microencapsulated chia seed oil.

BACKGROUND: Omega-3 fatty acids are known for their various health benefits. Chia is the richest vegetable source of omega-3 fatty acids. However, its oil is highly susceptible to oxidative deterioration and should be protected for incorporation into food matrices. This work aimed to study the incorporation of different chia oil microcapsules in a powdered beverage, analyzing the effect on the physicochemical characteristics and stability during storage. RESULTS: Different types of microcapsules were obtained: monolayer microcapsules using sodium caseinate and lactose as wall material, and multilayer microcapsules produced through electrostatic deposition using lecithins, chitosan, and chia mucilage as the first, second, and third layers, respectively. The results demonstrated an efficient enrichment of smoothies, with omega-3 fatty acid values ranging from 24.09% to 42.73%, while the original food matrix powder lacked this component. These powder beverages exhibited low moisture content (≤ 2.91%) and low water activity (≤ 0.39). The aerated, packed density and compressibility assays indicated that adding microcapsules made the powders less dense and compressible. The color of the original powdered beverage was not modified. The dispersibility reflected an acceptable instantaneity, reaching the maximum obscuration after 30 s of stirring. The solubility of all the enriched products was higher than 70%, whereas the pH was ~6.8. The contact angle between the powder and liquid indicated an excellent ability to be reconstituted in water. The analysis of the glass transition temperature showed that the storage temperature (25 °C) was adequate. The peroxide value of all the products was low throughout the storage (≤ 1.63 meq peroxide kg-1 of oil at 90 days at 25 ± 2 °C), thus maintaining the quality of the microencapsulated chia oil. CONCLUSIONS: The results suggest that incorporating the monolayer and multilayer chia oil microcapsules that were studied could be a viable strategy for enriching smoothies with the omega-3 fatty acids present in chia seed oil. © 2023 Society of Chemical Industry.

Effects of different toothpastes on the color and whiteness of stained anterior composite resin.

PURPOSE: To evaluate changes in the color of an anterior nanohybrid composite resin and differences in its whitening index after 30 days of brushing with six brands of whitening toothpaste in vitro to simulate the situation in individuals with high coffee consumption. METHODS: Eighty-four disk-shaped resin specimens were prepared (shade A2). For initial staining, the samples were immersed in coffee solution for 14 days and then divided into eight groups for treatment with various toothpastes. Color was assessed at the baseline, after initial staining, and on days 7, 14, and 30 of the staining-and-brushing cycle. Color stability was evaluated based on the CIEDE2000 color difference (ΔE00), and differences in whiteness were determined using the whitening index for dentistry (WID). RESULTS: The highest ΔE00 and ΔWID values were obtained with Colgate Herbal, followed by Opalescence Whitening and Crest Baking Soda and Peroxide, whereas the lowest values were obtained with distilled water, followed by Yotuel Pharma B5, on day 30 of the staining-and-brushing cycle. CONCLUSION: In terms of improving the color and whiteness of coffee-stained anterior nanohybrid composite resin, Colgate Herbal, Opalescence Whitening, and Crest Baking Soda and Peroxide yielded promising results after 30 days of continuous use.

FT-MIR-ATR Associated with Chemometrics Methods: A Preliminary Analysis of Deterioration State of Brazil Nut Oil.

Brazil nut oil is highly valued in the food, cosmetic, chemical, and pharmaceutical industries, as well as other sectors of the economy. This work aims to use the Fourier transform infrared (FTIR) technique associated with partial least squares regression (PLSR) and principal component analysis (PCA) to demonstrate that these methods can be used in a prior and rapid analysis in quality control. Natural oils were extracted and stored for chemical analysis. PCA presented two groups regarding the state of degradation, subdivided into super-degraded and partially degraded groups in 99.88% of the explained variance. The applied PLS reported an acidity index (AI) prediction model with root mean square error of calibration (RMSEC) = 1.8564, root mean square error of cross-validation (REMSECV) = 4.2641, root mean square error of prediction (RMSEP) = 2.1491, R2cal (calibration correlation coefficient) equal to 0.9679, R2val (validation correlation coefficient) equal to 0.8474, and R2pred (prediction correlation coefficient) equal to 0, 8468. The peroxide index (PI) prediction model showed RMSEC = 0.0005, REMSECV = 0.0016, RMSEP = 0.00079, calibration R2 equal to 0.9670, cross-validation R2 equal to 0.7149, and R2 of prediction equal to 0.9099. The physical-chemical analyses identified that five samples fit in the food sector and the others fit in other sectors of the economy. In this way, the preliminary monitoring of the state of degradation was reported, and the prediction models of the peroxide and acidity indexes in Brazil nut oil for quality control were determined.

Cobalt-aluminum spinel supported on modified γ-alumina for peroxymonosulfate activation: Si-Al ratio of support to optimize performance and reusability.

The development of cobalt-based supported catalysts with high PMS catalytic activity and stability by adjusting the composition of the support is highly desirable yet remains scarce. In the work, a series of catalysts (Co2AlO4/Al2O3-xSiO2) were prepared by impregnation and high-temperature calcination using Al2O3-xSiO2 with a low Si-Al ratio as the support. Measurement techniques such as XRD, XPS, UV-DRS, FTIR, BET, SEM and HRTEM were used to characterize textural and chemical properties (ratio of Co3+/Co2+, specific surface area, pore size, pore volume, etc.). The ratio of Co3+/Co2+ and pore volume of Co2AlO4/Al2O3-xSiO2 can be turned by controlling the ratio of Si to Al, which are closely related to the catalytic performance and reusability of the catalysts. The optimized catalyst (Co2AlO4/Al2O3-0.25SiO2) can completely degrade 10 mg/L p-nitrophenol (PNP) in 40 min in the pH range of 3-9 with excellent reusability. The effects of several reaction parameters (i.e., PMS dosage, Co2AlO4/Al2O3-0.25SiO2 dosage, reaction temperature, initial pH value, and inorganic ions) on PNP removal were comprehensively investigated. Sulfate radical (SO4•-) and singlet oxygen (1O2) are making a major contribution to the degradation of PNP. Moreover, a millimeter-scale catalyst (CoSiAl-0.25/Al2O3 pellet) was prepared by sol adsorption and high-temperature calcination method, which maintained high oxidation activity after treatment of 18 L wastewater (PNP of 10 mg/L) in a continuous flow process. The method is simple and easy to operate on a large scale, providing a new perspective on the design and preparation of cobalt-aluminum spinel catalysts for activated PMS.

Materials Based on Co, Cu, and Cr as Activators of PMS for Degrading a Representative Antibiotic-The Strategy for Utilization in Water Treatment and Warnings on Metal Leaching.

A chromate of copper and cobalt (Φy) was synthesized and characterized. Φy activated peroxymonosulfate (PMS) to degrade ciprofloxacin (CIP) in water. The Φy/PMS combination showed a high degrading capability toward CIP (~100% elimination in 15 min). However, Φy leached cobalt (1.6 mg L-1), limiting its use for water treatment. To avoid leaching, Φy was calcinated, forming a mixed metal oxide (MMO). In the combination of MMO/PMS, no metals leached, the CIP adsorption was low (<20%), and the action of SO4•- dominated, leading to a synergistic effect on pollutant elimination (>95% after 15 min of treatment). MMO/PMS promoted the opening and oxidation of the piperazyl ring, plus the hydroxylation of the quinolone moiety on CIP, which potentially decreased the biological activity. After three reuse cycles, the MMO still presented with a high activation of PMS toward CIP degradation (90% in 15 min of action). Additionally, the CIP degradation by the MMO/PMS system in simulated hospital wastewater was close to that obtained in distilled water. This work provides relevant information on the stability of Co-, Cu-, and Cr-based materials under interaction with PMS and the strategies to obtain a proper catalyst to degrade CIP.

Remediation and resource utilization of petroleum-contaminated soil by pyrite-assisted pyrolysis as bifunctional materials to adsorb heavy metal and activate peroxymonosulfate oxidation.

Petroleum-contaminated soil (PCS) requires not only efficient remediation technology but also economically viable reuse strategy of remediated soil with vast volume. This study developed a pyrite-assisted pyrolysis to convert PCS into a bifunctional material for the adsorption of heavy metal and the activation of peroxymonosulfate (PMS) oxidation. Adsorption isotherm and kinetic model fitting by Langmuir and pseudo-second-order well clarified the adsorption capacity and behavior of carbonized soil (CS) loaded with sulfur and iron (FeS@CS) for heavy metals. The theoretic maximum adsorption capacities of Pb2+, Cu2+, Cd2+, and Zn2+ by Langmuir model were 415.40, 80.25, 61.55, and 30.90 mg/g, respectively. The main adsorption mechanism includes sulfide precipitation, co-precipitation and surface complexation by iron oxides, and complexation by oxygen-containing functional groups. When the dosage of FeS@CS and PMS were both 3 g/L, the removal rate of aniline reached 99.64 % in 6 h. After five cycles of reuse, the aniline degradation rate was still as high as 93.14 %. The non-free radical pathway dominated in CS/PMS and FeS@CS/PMS systems. The electron hole was the primary active species in the CS/PMS system, which promoted aniline degradation by accelerating direct electron transfer. In comparison with CS, the surface of FeS@CS contained more iron oxides, oxygen-containing functional groups, and oxygen vacancies, making 1O2 the primary active species in the FeS@CS/PMS system. This study proposed a new integrated strategy for the efficient remediation of PCS and value-added reutilization of remediated soil.

Hydrogen peroxide oxidation modifies the structural properties and allergenicity of the bee pollen allergen profilin.

Bee pollen is a byproduct of pollination, which is a necessary process to produce foods. However, bee pollen can induce significant food-borne allergies. We previously identified a bee pollen-derived pan-allergen in the profilin family, Bra c p. Herein, we aimed to reduce Bra c p allergenicity via protein oxidation with hydrogen peroxide and explore the changes induced. Ion-mobility mass spectrometry revealed aggregation of the oxidized product; we also found irreversible sulfonation of the free sulfhydryl group of the Bra c p Cys98 residue to a more stable cysteine derivative. A significant proportion of the α-helices in Bra c p were transformed into ß-sheets after oxidation, masking the antigenic epitopes. An immunoassay demonstrated that the IgE-binding affinity of Bra c p was decreased in vitro after oxidation. To our knowledge, this is the first report describing the application of protein oxidation to reduce the allergenicity of profilin family member in foods.

Field-Deployable Determinations of Peroxide Index and Total Phenolic Content in Olive Oil Using a Promising Portable Sensor System.

Useful information about the oxidative stability of a virgin olive oil in terms of oxidation products and antioxidant compounds can be obtained by analyzing the peroxide index (PI) and total phenolic content (TPC), respectively. These quality parameters are usually determined in a chemical laboratory using expensive equipment, toxic solvents, and well-trained personnel. This paper presents a novel portable sensor system for in the field and rapid determination of PI and TPC that is particularly suited in the case of small production environments that cannot afford an internal laboratory for quality control analysis. The system is small, can be powered by both USB ports and batteries, is easy to operate, and integrates a Bluetooth module for wireless data transmission. It estimates the PI and TPC in olive oil from the measurement of the optical attenuation of an emulsion between a reagent and the sample under test. The system has been tested on a set of 12 olive oil samples (eight for calibration and four for validation), and the results have shown how the considered parameters can be estimated with good accuracy. The maximum deviation from the results obtained with the reference analytical techniques is 4.7 meq O2/kg in the case of PI and 45.3 ppm in the case of TPC for the calibration set, while it is 14.8 meq O2/kg in the case of PI and 55 ppm in the case of TPC for the validation set.