Structure characterization and protective effect against UVB irradiation of polysaccharides isolated from the plateau plant Gentiana dahurica Fisch.

Gentiana dahurica Fisch. (G. dahurica) is one of the legitimate sources of Qinjiao in Traditional Chinese Medicine (TCM) and grows on high-altitude plateaus. Plants develop unique biochemical accumulations to resist plateau conditions, especially the strong UV irradiation. Thus, this study aimed to investigate the polysaccharide of G. dahurica (GDP), its structure and its activity against UVB irradiation. Four GDPs were isolated and two of them were subjected to structural elucidation. The results suggested that GDP-1 has 53.5 % Ara and 30.8 % GalA as its main monosaccharides, with a molecular weight (Mw) of 23 kDa; the GDP-2 has 33.9 % Ara and 48.5 % GalA, with a Mw of 82 kDa. Methylation and NMR spectroscopy analysis revealed that GDP-1 contains →5)-α-Araf-(1 â†’ 5)-α-Araf-(1 â†’ 3,5)-α-Araf-(1 â†’ 3,4)-α-GalpA-(6-OMe)-(1→ as the main chain, the branches of GalA (with esterification), and the terminal Ara; the GDP-2 contains →4)-α-GalpA-(1 â†’ 4)-α-GalpA-(6-OMe)-(1 â†’ 5)-α-Araf-(1 â†’ 3,5)-α-Araf-(1→ as the main chain, the branches of →5)-α-Araf-(1-5)-α-Araf, and the terminal GalA. Both GDP-1 and GDP-2 exhibited concentration-dependent antioxidant activity against DPPH, ABTS and hydroxyl radicals. Moreover, GDPs significantly attenuated the decreases in viability and proliferation of HaCaT cells after UVB irradiation. They can scavenge reactive oxygen species (ROS) and improve the activities of endogenous antioxidant enzymes, including superoxide dismutase (SOD) and glutathione peroxidase (GSH). The potential mechanism explored by flow cytometry assays of cell apoptosis and cell cycle distribution suggested that GDPs exert protective effects against UVB irradiation by reducing ROS and attenuating S phase cell arrest. In brief, the GDP-1 and GDP-2 are α-1,3- and α-1,4- arabinogalacturonan, respectively. The high content of Ara could be attributed to biochemical accumulation in resisting to the plateau environment and to prevent UVB irradiation-related damage in cells. These findings provide insight into authentic medicinal herbs and the development of GDPs in the modern pharmaceutical and cosmetics industry.

[Analysis and prospect of correlation between relative molecular weight and efficacy of polysaccharides from medicinal plant resources].

Polysaccharides from medicinal plant resources are a kind of polymers extracted from medicinal plants. They are complex long chains formed by different monosaccharides connected via glucosidic bonds. These polysaccharides usually have straight chain and branched chain structures, and their relative molecular weight changes greatly. Modern studies have shown that the biological activi-ty of polysaccharides from medicinal plant resources is closely related to their relative molecular weight. This paper first reviewed the preparation and detection methods of polysaccharides from medicinal plant resources with different relative molecular weights. Then, the paper summarized and analyzed the general experience of the correlation between efficacy and relative molecular weight of polysaccharides from medicinal plant resources with different molecular weights. It was considered that polysaccharides with large relative molecular weights(>100 kDa) play a leading role in immune regulation. Polysaccharides with medium relative molecular weights(10-100 kDa) play a leading role in immune regulation and the protection of the liver. Polysaccharides with small relative molecular weights(<10 kDa) play a leading role in anti-oxidation, regulation of intestinal flora, regulation of blood glucose and lipids, anti-fatigue, and the protection of nerves. Therefore, precise development of polysaccharides from medicinal plant resources based on relative molecular weight is expected to improve their biological activity and application value.

Lactococcus cell envelope proteases enable lactococcal growth in minimal growth media supplemented with high molecular weight proteins of plant and animal origin.

Lactic acid bacteria (LAB) have evolved into fastidious microorganisms that require amino acids from environmental sources. Some LAB have cell envelope proteases (CEPs) that drive the proteolysis of high molecular weight proteins like casein in milk. CEP activity is typically studied using casein as the predominant substrate, even though CEPs can hydrolyze other protein sources. Plant protein hydrolysis by LAB has rarely been connected to the activity of specific CEPs. This study aims to show the activity of individual CEPs using LAB growth in a minimal growth medium supplemented with high molecular weight casein or potato proteins. Using Lactococcus cremoris MG1363 as isogenic background to express CEPs, we demonstrate that CEP activity is directly related to growth in the protein-supplemented minimal growth media. Proteolysis is analyzed based on the amino acid release, allowing a comparison of CEP activities and analysis of amino acid utilization by L. cremoris MG1363. This approach provides a basis to analyze CEP activity on plant-based protein substrates as casein alternatives and to compare activity of CEP homologs.

Effect of PVP Molecular Weights on the Synthesis of Ultrasmall Cus Nanoflakes: Synthesis, Properties, and Potential Application for Phototheranostics.

Copper sulfide nanoparticles (CuS) hold tremendous potential for applications in photothermal therapy (PTT) and photoacoustic imaging (PAI). However, the conventional chemical coprecipitation method often leads to particle agglomeration issues. To overcome this challenge, we utilized polyvinylpyrrolidone (PVP) as a stabilizing agent, resulting in the synthesis of small PVP-CuS nanoparticles named PC10, PCK30, and PC40. Our study aimed to investigate how different molecular weights of PVP influence the nanoparticles' crystalline characteristics and essential properties, especially their photoacoustic and photothermal responses. While prior research on PVP-assisted CuS nanoparticles has been conducted, our study delves deeper into this area, providing insights into optical properties. Remarkably, all synthesized nanoparticles exhibited a crystalline structure, were smaller than 10 nm, and featured an absorbance peak at 1020 nm, indicating their robust photoacoustic and photothermal capabilities. Among these nanoparticles, PC10 emerged as the standout performer, displaying superior photoacoustic properties. Our photothermal experiments demonstrated significant temperature increases in all cases, with PC10 achieving an impressive efficiency of 51%. Moreover, cytotoxicity assays revealed the nanoparticles' compatibility with cells, coupled with an enhanced incidence of apoptosis compared to necrosis. These findings underscore the promising potential of PVP-stabilized CuS nanoparticles for advanced cancer theranostics.

Complete genome sequence of a novel mitovirus isolated from the fungus Fusarium oxysporum f. sp. ginseng causing ginseng root rot.

A novel mitovirus, tentatively designated as "Fusarium oxysporum mitovirus 2" (FoMV2), was isolated from the pathogenic Fusarium oxysporum f. sp. ginseng strain 0414 infecting Panax ginseng. The complete genome of FoMV2 is 2388 nt in length with a GC content of 30.57%. It contains a large open reading frame (ORF) encoding a putative RNA-dependent RNA polymerase (RdRp) of 713 amino acids with a molecular weight of 83.05 kDa. The sequence identity between FoMV2 and Botrytis cinerea mitovirus 8 and Fusarium verticillioides mitovirus 1 was 87.94% and 77.85%, respectively. Phylogenetic analysis showed that FoMV2 belongs to the genus Unuamitovirus in the family Mitoviridae. To the best of our knowledge, this is the first report of an unuamitovirus isolated from F. oxysporum f. sp. ginseng causing ginseng root rot.

Structural characterization, molecular dynamic simulation, and conformational visualization of a water-soluble glucan with high molecular weight from Gastrodia elata Blume.

Polysaccharides have been widely used in the development of natural drugs and health food. However, polysaccharide characterization lags due to inherently complicated features and the limitations of existing detection approaches. We aimed to provide new insight into the fine structure and conformational visualization of polysaccharides from Gastrodia elata Blume, a medicinal and edible plant. A water-soluble polysaccharide (GEP2-6) with the high molecular weight of 2.7 × 106 Da was first obtained, and its purity reached 99.2 %. Chemical and spectroscopic analyses jointly revealed that GEP2-6 was a glucan linked by α-(1 â†’ 4) and α-(1 â†’ 6) glycosidic bonds. After enzymolysis, the local structure of GEP2-6 included α-1,4-Glcp, α-1,6-Glcp, α-1,4,6-Glcp, and α-1-Glcp at a molar ratio of 31.27∶1.32∶1.08∶0.93. The glycosidic linkage pattern of repeating units was further simulated by a glycan database and spatial examination software. The good dissolution performance was interpreted by dynamics simulation and practical molecular characteristics. Spherical flexible chains and the porous stable conformation were corroborated using atomic force microscopy. In addition, GEP2-6 could effectively scavenge DPPH and hydroxyl radicals as a promising natural antioxidant. These efforts will contribute to the expansion of clinical applications of this G. elata polysaccharide and the structural elucidation for macromolecular polysaccharides combined with traditional and modern analysis techniques.

The multi-scale structures and in vitro digestibility of starches with different crystalline types induced by dielectric barrier discharge plasma.

The effects of plasma treatment on multi-scale structures and in vitro digestibility of starches isolated from Tartary buckwheat (TBS), potato (PTS), and pea (PS), were investigated. The results from SEM and CLSM showed that plasma treatment resulted in the extension of pores from the starch hilum to the surface. The XRD and 13C CP/MAS NMR spectra demonstrated that the crystalline type of three starches was not changed by plasma treatment, while the RC and double helix content of TBS increased. Besides, the single helix content and the proportion of amorphous phase decreased following the treatment, which was consistent with the result of SAXS. However, the PTS and PS showed the opposite results by plasma treatment. In addition, the modification significantly changed the molecular weight (Mw) and chain length distribution of all the starches, among which the Mw of PTS fell drastically from 2.45 × 107 g/mol to 1.74 × 107 g/mol. The in vitro digestibility of starches increased significantly when treated with plasma, in which TBS exhibited the biggest increase for its inside-out and side-by-side digestion manners. Therefore, plasma treatment led to different alteration trends for multi-scale structures with quite various change extent for in vitro digestibility about different crystalline starches.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods.

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Insights into the impact of modification methods on the structural characteristics and health functions of pectin: A comprehensive review.

Pectin is a complex polysaccharide that is widely present in plant cells and has multiple physiological functions. However, most pectin exists in the form of protopectin, which has a large molecular weight and cannot be fully absorbed and utilized in the human gut to exert its effects. The significant differences in the structure of different sources of pectin also limited their application in the food and medical fields. In order to achieve greater development and utilization of pectin functions, this paper reviewed several commonly used methods for pectin modification from physical, chemical, and biological perspectives, and elaborated on the relationship between these modification methods and the structure and functional properties of pectin. At the same time, the functional characteristics of modified pectin and its application in medical health, such as regulating intestinal health, anticancer, anti-inflammatory, and drug transport, were reviewed, so as to provide a theoretical basis for targeted modification of pectin and the development of new modified pectin products.

Plum blossom low molecular weight polypeptide protects HaCaT cells against UVB-induced oxidative damage in vitro and underlying mechanism.

BACKGROUND: Increasing amounts of ultraviolet radiation occur as ozone depletion causes the earth's ozone layer to be destroyed, making antioxidant efficacy a research hotspot. Previous studies on plum blossom have mostly focused on Volatile Oils, Flavonoids, Phenylpropanoids, and other compounds, whereas few studies have focused on low molecular weight polypeptide (LMWP) of plum blossom. This research provides a reference for the deep processing and utilization of plum blossom. OBJECTIVES: (a) Plum blossom low molecular weight polypeptides protect HaCaT cells against UVB-induced oxidative damage in vitro and the underlying mechanism. (b) Improve the theoretical basis for the intense processing and utilization of plum blossom. METHODS: The safe concentration of LMWP and the survival rate of HaCaT cells were determined using the CCK-8 experiment. The fluorescence intensity of reactive oxygen species (ROS) was identified using the dichlorofluorescin diacetate (DCFH-DA) method; Superoxide dismutase (SOD) and malondialdehyde (MDA) concentrations were measured in ruptured cells; Western blot analysis was used to examine the expression levels of three proteins: nuclear factor E2-related factor 2 (Nrf2), heme oxygenase 1 (HO-1), and benzoquinone oxidoreductase 1 (NQO-1). RESULTS: It was noted that a certain concentration of LMWP could promote cell proliferation. In oxidatively damaged HaCaT cells, SOD levels and survival rates were markedly reduced, but ROS and MDA levels were elevated. However, after treatment with LMWP, the survival rate of the cells and SOD levels were markedly increased, and the levels of ROS and MDA were markedly decreased. As shown by Western blotting, the model group exhibited lower levels of Nrf2, HO-1, and NQO-1 expression than the control group, whereas LMWP-treated cells had significantly higher levels of Nrf2, HO-1, and NQO-1 expression than their model-treated counterparts. CONCLUSIONS: LMMP can effectively protect HaCaT cells against oxidative damage in vitro induced by UVB, and the underlying mechanism is linked to the activation of the transcription factor Nrf2.

Specific molecular weight of Lycium barbarum polysaccharide for robust breast cancer regression by repolarizing tumor-associated macrophages.

The pro-tumorigenic M2-type tumor-associated macrophages (TAMs) in the immunosuppressive tumor microenvironment (TME) promote the progression, angiogenesis, and metastasis of breast cancer. The repolarization of TAMs from an M2-type toward an M1-type holds great potential for the inhibition of breast cancer. Here, we report that Lycium barbarum polysaccharides (LBPs) can significantly reconstruct the TME by modulating the function of TAMs. Specifically, we separated four distinct molecular weight segments of LBPs and compared their repolarization effects on TAMs in TME. The results showed that LBP segments within 50-100 kDa molecular weight range exhibited the prime effect on the macrophage repolarization, augmented phagocytosis effect of the repolarized macrophages on breast cancer cells, and regression of breast tumor in a tumor-bearing mouse model. In addition, RNA-sequencing confirms that this segment of LBP displays an enhanced anti-breast cancer effect through innate immune responses. This study highlights the therapeutic potential of LBP segments within the 50-100 kDa molecular weight range for macrophage repolarization, paving ways to offer new strategies for the treatment of breast cancer.

Physicochemical, structural, and functional characterization of pectin extracted from quince and pomegranate peel: A comparative study.

Pectin's physicochemical, structural, and functional characteristics vary widely depending on the source of extraction. In this study, pectins were extracted from seedless quince and pomegranate peel, and their physicochemical, structural, and functional properties were investigated. A Box-Behnken Design with three factors and three levels was applied to optimize the pectin extraction yield from each matrix. As a result, the best extraction yields for quince pectin (QP) and pomegranate peel pectin (PPP) were 11.44 and 12.08 % (w/w), respectively. Both extracted pectins exhibit a linear structure, with the homogalacturonan domain dominating the rhamnogalacturonan I. Both pectins are highly methyl-esterified (DM > 69 %) with a higher degree of acetylation for PPP than QP, with 12 and 8 %, respectively. Unlike QP, PPP has a narrow, homogenous distribution and greater molecular weight (120 kDa). Regarding functionality, 1 g of QP could retain 4.92 g of water, and both pectin emulsions were more stable at room temperature than at 4 °C. When the concentration of QP is increased, rheological measurements demonstrate that it exhibits pseudoplastic behavior. Finally, QP can be used as a thickener, whereas PPP can be utilized as starting material for chemical changes to create multifunctional pectins.

Therapeutic potential of low-molecular weight lignin model polymer fractions for treating skin lesions in animals: a pilot study.

Bacterial infections and resistance to antibiotics are increasingly severe problems. In recent years, Staphylococcus species have emerged as important pathogens in animals and humans. Current therapeutic methods against these species have serious disadvantages; therefore new agents with antibacterial potential, such as plant-based substances, are very important in therapy. We report a pilot study with new method of fractioning the dehydrogenate polymer DHP obtained from coniferyl alcohol and application of the low-MW fractions of 200-3000 Da for antibacterial activity in healing animal lesions. In vivo experiments were conducted on the dogs having a skin lesion. Dogs were treated with the suspension containing the low-MW DHP fractions as the active ingredient, in combination with alginate for 7 days. Cytological smears and microbiological analyses of the affected area were performed. Staphylococcus spp. was isolated from lesions in all dogs from our research. The results show that the low-MW DHP suspension in alginate promotes skin healing and reduction of the infection of the lesions in the affected animals. Pharmaceutical composition containing the low-MW DHP fractions exerts a soothing effect on the subject in wound treatment. Reduction in the number of bacteria by 30% and more were noticed in 6 dogs, while in 4 dogs this percentage is above 50%. No side effects were noticed. Synthesized lignin oligomers may have a significant place as antimicrobial and skin healing agents, especially since an increasing number of multidrug-resistant staphylococci are found on the skin lesions in animals.

Molecular weight-dependent antitumor effects of prunes-derived type I arabinogalactan on human and murine triple wild-type melanomas.

The regulation of metastasis-related cellular aspects of two structurally similar AGIs from prunes tea infusion, with different molar masses, was studied in vitro against Triple Wild-Type metastatic melanoma (TWM) from murine and human origin. The higher molar mass AGI (AGI-78KDa) induced TWMs cells death and, in murine cell line, it decreased some metastasis-related cellular processes: invasiveness capacity, cell-extracellular matrix interaction, and colonies sizes. The lower molar mass AGI (AGI-12KDa) did not induce cell death but decreased TWMs proliferation rate and, in murine cell line, it decreased cell adhesion and colonies sizes. Both AGIs alter the clonogenic capacity of human cell line. In spite to understand why we saw so many differences between AGIs effects on murine and human cell lines we performed in silico analysis that demonstrated differential gene expression profiles between them. Complementary network topological predictions suggested that AGIs can modulate multiple pathways in a specie-dependent manner, which explain differential results obtained in vitro between cell lines. Our results pointed to therapeutic potential of AGIs from prunes tea against TWMs and showed that molecular weight of AGIs may influence their antitumor effects.

Peptide composition analysis, structural characterization, and prediction of iron binding modes of small molecular weight peptides from mung bean.

Iron supplementation is a proactive approach to limit instances of iron deficiency anemia. This study is based on the enzymatic hydrolysis and fractionation of mung bean proteins (MBPs) followed by the determination of the Fe2+ chelating activities of these peptide-containing fractions. MBP-Fe complex was generated using a chemical chelation method and subsequently characterized. Following Sephadex G15 separation of MBPs, one of the fractions containing 10 different peptides, demonstrated maximum Fe2+ chelating activity of 39.97 ± 0.07 µg/mg. The sequences of these peptides were determined using liquid chromatography-tandem mass spectrometry. The Fe2+ ion content of the MBP-Fe complex was determined using X-ray photoelectron spectroscopy and 80% of the iron was found to be in Fe2+ oxidation state. After iron chelation, there was an increase in the peptide's particle size, with an average value of 550.67 ± 0.70 nm. This increase in size was attributed to the contributions of the amino proline and glycine, which extended the peptides to form the MBP-Fe complex. Finally, molecular docking studies revealed that Fe2+ mainly bound to carboxy-oxygen of glutamate and aspartate residues of mung bean peptides to form MBP-Fe complex. This research could serve as a scientific foundation for the development of dietary iron supplements using plant-derived peptides.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure.

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

Optimization of Three Extraction Methods and Their Effect on the Structure and Antioxidant Activity of Polysaccharides in Dendrobium huoshanense.

Dendrobium huoshanense is a famous edible and medicinal herb, and polysaccharides are the main bioactive component in it. In this study, response surface methodology (RSM) combined with a Box-Behnken design (BBD) was used to optimize the enzyme-assisted extraction (EAE), ultrasound-microwave-assisted extraction (UMAE), and hot water extraction (HWE) conditions and obtain the polysaccharides named DHP-E, DHP-UM, and DHP-H. The effects of different extraction methods on the physicochemical properties, structure characteristics, and bioactivity of polysaccharides were compared. The differential thermogravimetric curves indicated that DHP-E showed a broader temperature range during thermal degradation compared with DHP-UM and DHP-H. The SEM results showed that DHP-E displayed an irregular granular structure, but DHP-UM and DHP-H were sponge-like. The results of absolute molecular weight indicated that polysaccharides with higher molecular weight detected in DHP-H and DHP-UM did not appear in DHP-E due to enzymatic degradation. The monosaccharide composition showed that DHPs were all composed of Man, Glc, and Gal but with different proportions. Finally, the glycosidic bond types, which have a significant effect on bioactivity, were decoded with methylation analysis. The results showed that DHPs contained four glycosidic bond types, including Glcp-(1→, →4)-Manp-(1→, →4)-Glcp-(1→, and →4,6)-Manp-(1→ with different ratios. Furthermore, DHP-E exhibited better DPPH and ABTS radical scavenging activities. These findings could provide scientific foundations for selecting appropriate extraction methods to obtain desired bioactivities for applications in the pharmaceutical and functional food industries.

Valorization of walnut green husk (Juglans regia L.) through sequential electrohydrodynamic extraction of pectin and phenolics: Process optimization and multidimensional analysis.

This study aimed to optimize the extraction of pectin and phenolics from walnut green husk using the electrohydrodynamic method (EHD) and assess its impact on the chemical structure and properties of pectin. A comparative analysis was conducted with acidified water as the conventional extraction method. The results revealed significant improvements under the optimal EHD conditions (36.8 min, 17.5 kV, 90 °C), leading to a remarkable increase of over 64 % in pectin yield and >20 % in total phenolic content in half the extraction time. Chemical analysis showed that pectin samples contain 1.4-1.7 % ash, 3.6-4.6 % protein, over 90 % carbohydrates, and a galacturonic acid content ranging from 67.7 to 68.2 g/g. Both extraction methods yielded pectin with a high methoxyl degree, comparable thermal stability, and amorphous structure. EHD treatment resulted in reduced molecular weight, degree of esterification, water-holding capacity, and emulsion stability of pectin while enhancing its solubility and emulsion capacity. In summary, EHD treatment significantly improved extraction yield and changed the functionality of pectin, particularly in terms of emulsion activity. This alteration should be considered when utilizing pectin for specific applications.