Mixed Pluronic/lecithin micelles formulation for oral bioavailability of candesartan cilexetil drug: in vitro characterization and in vivo pharmacokinetic investigations.

OBJECTIVE: This study aimed to develop a mixed polymeric micelle formulation incorporating candesartan cilexetil (CAND) drug to enhance its oral bioavailability for the better treatment of hypertension. METHODS: A Box-Behnken design was utilized to optimize the CAND-incorporated mixed polymeric micelles formulation (CAND-PFLC) consisting of Pluronics (P123 and F68) and lecithin (LC). The optimized CAND-PFLC micelles formulation was characterized for size, shape, zeta potential, polydispersity index (PDI), and entrapment efficiency (%EE). An in vitro release study, ex vivo permeability investigation, and an in vivo pharmacokinetic analysis were carried out to evaluate the performance of the formulation. RESULTS: The optimized CAND-PFLC micelles formulation demonstrated a spherical shape, a particle size of 44 ± 2.03 nm, a zeta potential of -7.07 ± 1.39 mV, a PDI of 0.326 ± 0.06, and an entrapment efficiency of 87 ± 3.12%. The formulation exhibited excellent compatibility, better stability, and a noncrystalline nature. An in vitro release study revealed a faster drug release of 7.98% at gastric pH in 2 hrs and 94.45% at intestinal pH within 24 hrs. The ex vivo investigation demonstrated a significantly enhanced permeability of CAND, with 94.86% in the micelle formulation compared to 9.03% of the pure drug. In vivo pharmacokinetic analysis showed a 4.11-fold increase in oral bioavailability of CAND compared to the marketed formulation. CONCLUSION: The CAND-PFLC mixed micelle formulation demonstrated improved performance compared to pure CAND, indicating its potential as a promising oral drug delivery system for the effective treatment of hypertension.

Thermosensitive gel based on cellulose derivative for topical delivery of propolis in acne treatment.

Thermosensitive bioadhesive formulations can display increased retention time, skin permeation, and improve the topical therapy of many drugs. Acne is an inflammatory process triggered by several factors like the proliferation of the bacteria Propionibacterium acnes. Aiming for a new alternative treatment with a natural source, propolis displays great potential due to its antibiotic, anti-inflammatory, and healing properties. This study describes the development of bioadhesive thermoresponsive platform with cellulose derivatives and poloxamer 407 for propolis skin delivery. Propolis ethanolic extract (PES) was added to the formulations with sodium carboxymethylcellulose (CMC) or hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (Polox). The formulations were characterized as rheology, bioadhesion, and mechanical analysis. The selected formulations were investigated as in vitro propolis release, cytotoxicity, ex vivo skin permeation by Fourier Transform Infrared Photoacoustic Spectroscopy, and the activity against P. acnes. Formulations showed suitable sol-gel transition temperature, shear-thinning behavior, and texture profile. CMC presence decreased the cohesiveness and adhesiveness of formulations. Polox/HPMC/PES system displayed less cytotoxicity, modified propolis release governed by anomalous transport, skin permeation, and activity against P. acnes. These results indicate important advantages in the topical treatment of acne and suggest a potential formulation for clinical evaluation.

An Innovative Customized Biomimetic Hydrogel for Drug Screening Application Potential: Biocompatibility and Cell Invasion Ability.

The ability of Pluronic F127 (PF127) conjugated with tetrapeptide Gly-Arg-Gly-Asp (GRGD) as a sequence of Arg-Gly-Asp (RGD) peptide to form the investigated potential hydrogel (hereafter referred to as 3DG bioformer (3BE)) to produce spheroid, biocompatibility, and cell invasion ability, was assessed in this study. The fibroblast cell line (NIH 3T3), osteoblast cell line (MG-63), and human breast cancer cell line (MCF-7) were cultured in the 3BE hydrogel and commercial product (Matrigel) for comparison. The morphology of spheroid formation was evaluated via optical microscopy. The cell viability was observed through cell counting Kit-8 assay, and cell invasion was investigated via Boyden chamber assay. Analytical results indicated that 3BE exhibited lower spheroid formation than Matrigel. However, the 3BE appeared biocompatible to NIH 3T3, MG-63, and MCF-7 cells. Moreover, cell invasion ability and cell survival rate after invasion through the 3BE was displayed to be comparable to Matrigel. Thus, these findings demonstrate that the 3BE hydrogel has a great potential as an alternative to a three-dimensional cell culture for drug screening applications.

Antioxidant-containing monoolein aqueous dispersions: a preliminary study.

The present study describes a preliminary study on the use of monoolein aqueous dispersions (MADs) as delivery systems for antioxidant molecules, namely, ascorbyl palmitate (AP) and alpha-tocopherol (AT). MAD, produced by emulsifying monoolein (4.5% w/w) in water and poloxamer 407 (0.5% w/w) as emulsifier, was characterized in terms of size, morphology, and antioxidant activity by mean of PCS, cryo-TEM, and (2,2-diphenyl-1-picrylhydrazyl) assay. MAD-AP or MAD-AT gave rise to a bimodal size distribution with mean size around 200 nm. All the preparations stored at 25 °C showed quite stable size at least up to 90 days. Cryo-TEM images confirmed MAD size distribution and indicated different MAD morphologies as a function of the loaded antioxidant molecule. Indeed, in the case of MAD-AP, vesicles and cubosomes with the typical inner cubic structure were observed, while vesicles and hexosomes were shown for MAD-AT. The encapsulation efficiency of both antioxidants reached more than 90% with respect to the total amount of drug used for MAD preparation. Moreover, AP and AT antioxidant activity was retained after encapsulation, and in vitro Franz cell experiments showed that the MAD enabled to better control the drug release. These preliminary results suggest that MAD formulations could be further investigated as a potential delivery system for antioxidant supplementation in dietary or cosmetic fields.

Design and Optimization of Stimuli-responsive Emulsion-filled Gel for Topical Delivery of Copaiba Oil-resin.

This study presents a phytotherapeutic emulsion-filled gel design composed of Pluronic® F127, Carbopol® C934P, and high level of copaiba oil-resin (PHY-ECO). Mathematical modeling and response surface methodology (RSM) were employed to access the optimal ratio between the oil and the polymer gel-matrix constituents. The chemometric approach showed robust mechanical and thermoresponsive properties for emulsion gel. The model predicts viscosity parameters at 35.0°C (skin temperature) from PHY-ECOs. Optimized PHY-ECOs were described by 18-20% (w/w) F127, 0.25% (w/w) C934P, and 15% (w/w) copaiba oil-resin, and showed interfacial layers properties that led to high physicochemical stability. Besides, it had thermal stimuli-responsive that led large viscosity range before and after skin administration, observed by oscillatory rheology. These behaviors give the optimized smart PHY-ECO high design potential to be used as a pharmaceutical platform for CO delivery, focusing on the anti-inflammatory therapy and skin wound care.

The Influence of Tea Tree Oil on Antifungal Activity and Pharmaceutical Characteristics of Pluronic® F-127 Gel Formulations with Ketoconazole.

Fungal skin infections are currently a major clinical problem due to their increased occurrence and drug resistance. The treatment of fungal skin infections is based on monotherapy or polytherapy using the synergy of the therapeutic substances. Tea tree oil (TTO) may be a valuable addition to the traditional antifungal drugs due to its antifungal and anti-inflammatory activity. Ketoconazole (KTZ) is an imidazole antifungal agent commonly used as a treatment for dermatological fungal infections. The use of hydrogels and organogel-based formulations has been increasing for the past few years, due to the easy method of preparation and long-term stability of the product. Therefore, the purpose of this study was to design and characterize different types of Pluronic® F-127 gel formulations containing KTZ and TTO as local delivery systems that can be applied in cases of skin fungal infections. The influence of TTO addition on the textural, rheological, and bioadhesive properties of the designed formulations was examined. Moreover, the in vitro release of KTZ, its permeation through artificial skin, and antifungal activity by the agar diffusion method were performed. It was found that obtained gel formulations were non-Newtonian systems, showing a shear-thinning behaviour and thixotropic properties with adequate textural features such as hardness, compressibility, and adhesiveness. Furthermore, the designed preparations with TTO were characterized by beneficial bioadhesive properties. The presence of TTO improved the penetration and retention of KTZ through the artificial skin membrane and this effect was particularly visible in hydrogel formulation. The developed gels containing TTO can be considered as favourable formulations in terms of drug release and antifungal activity.

Preparation and Antibacterial Activity of Thermo-Responsive Nanohydrogels from Qiai Essential Oil and Pluronic F108.

Essential oils (EOs) have been used in cosmetics and food due to their antimicrobial and antiviral effects. However, the applications of EOs are compromised because of their poor aqueous solubility and high volatility. Qiai (Artemisia argyi Levl. et Van. var. argyi cv. Qiai) is a traditional Chinese herb and possesses strong antibacterial activity. Herein, we report an innovative formulation of EO as nanohydrogels, which were prepared through co-assembly of Qiai EO (QEO) and Pluronic F108 (PEG-b-PPG-b-PEG, or PF108) in aqueous solution. QEO was efficiently loaded in the PF108 micelles and formed nanohydrogels by heating the QEO/PF108 mixture solution to 37 °C, by the innate thermo-responsive property of PF108. The encapsulation efficiency and loading capacity of QEO reached 80.2% and 6.8%, respectively. QEO nanohydrogels were more stable than the free QEO with respect to volatilization. Sustained QEO release was achieved at body temperature using the QEO nanohydrogels, with the cumulative release rate reaching 95% in 35 h. In vitro antibacterial test indicated that the QEO nanohydrogels showed stronger antimicrobial activity against S. aureus and E. coli than the free QEO due to the enhanced stability and sustained-release characteristics. It has been attested that thermo-responsive QEO nanohydrogels have good potential as antibacterial cosmetics.

Ropivacaine-Loaded Poloxamer Binary Hydrogels for Prolonged Regional Anesthesia: Structural Aspects, Biocompatibility, and Pharmacological Evaluation.

This study reports the development of thermosensitive hydrogels for delivering ropivacaine (RVC), a wide clinically used local anesthetic. For this purpose, poloxamer- (PL-) based hydrogels were synthesized for evaluating the influence of polymer concentration, hydrophilic-lipophilic balances, and binary system formation on biopharmaceutical properties and pharmacological performance. Transition temperatures were shifted, and rheological analysis revealed a viscoelastic behavior with enhanced elastic/viscous modulus relationship (G'/G " = 1.8 to 22 times), according to hydrogel composition and RVC incorporation. The RVC release from PL407 and PL407/338 systems followed the Higuchi model (R 2 = 0.923-0.989), indicating the drug diffusion from hydrogels to the medium. RVC-PL hydrogels were potentially biocompatible evoking low cytotoxic effects (in fibroblasts and Schwann cells) and mild/moderate inflammation signs on sciatic nerve nearby histological evaluation. In vivo pharmacological assays demonstrated that PL407 and PL407/338 evoked differential analgesic effects, by prolonging the sensory blockade duration up to ~340 and 250 min., respectively. All those results highlighted PL407 and PL407/338 as promising new strategies for sustaining analgesic effects during the postoperative period.

Repurposing of nifedipine loaded in situ ophthalmic gel as a novel approach for glaucoma treatment.

Glaucoma is a chronic eye disease characterized by elevated intraocular pressure (IOP) which causes severe complications to the eyes and may lead to vision loss. The effective treatment of such diseases motivated the search for novel and unique drugs and delivery systems. It has been reported that, nifedipine (NF) is effective in reducing the elevated IOP due to vasodilatation of eye vascular smooth muscles. NF loaded thermo-sensitive in situ gels were prepared by the cold method using poloxamer 407 (P407) and hydroxypropyl methyl cellulose (HPMC) polymers adopting Box-Behnken experimental design. All the prepared formulae were tested for homogeneity, clarity, pH, isotonicity, gelling capacity, rheological behavior, in vitro drug release and were tested in vivo on rabbits. The prepared in situ gels were homogenous, transparent, having a pH ranged from 5 to 5.5 and undergo sol-gel transition within few seconds physiological temperature. The in situ gels showed sustained in vitro release of NF where about 76% of the loaded drug was released over 12 h. NF loaded in situ gels showed a 45.83 ± 2.91% reduction in the IOP, with no sign of toxicity or irritation to the eye in rabbits. The current investigations clarified the efficiency of this novel and unique NF loaded in situ gel for the control of the IOP compared to the conventional ophthalmic dosage forms.

Optimization, and in vitro and in vivo evaluation of etomidate intravenous lipid emulsion.

The aim of this investigation was to develop an etomidate intravenous lipid emulsion (ETM-ILE) and evaluate its properties in vitro and in vivo. Etomidate (ETM) is a hydrophobic drug, and organic solvents must be added to an etomidate injectable solution (ETM-SOL) to aid dissolution, that causes various adverse reactions on injection. Lipid emulsions are a novel drug formulation that can improve drug loading and reduce adverse reactions. ETM-ILE was prepared using high-pressure homogenization. Univariate experiments were performed to select key conditions and variables. The proportion of oil, egg lecithin, and poloxamer 188 (F68) served as variables for the optimization of the ETM-ILE formulation by central composite design response surface methodology. The optimized formulation had the following characteristics: particle size, 168.0 ± 0.3 nm; polydispersity index, 0.108 ± 0.028; zeta potential, -36.4 ± 0.2 mV; drug loading, 2.00 ± 0.01 mg/mL; encapsulation efficiency, 97.65% ± 0.16%; osmotic pressure, 292 ± 2 mOsmol/kg and pH value, 7.63 ± 0.07. Transmission electron microscopy images showed that the particles were spherical or spheroidal, with a diameter of approximately 200 nm. The stability study suggested that ETM-ILE could store at 4 ± 2 °C or 25 ± 2 °C for 12 months. Safety tests showed that ETM-ILE did not cause hemolysis or serious vascular irritation. The results of the pharmacokinetic study found that ETM-ILE was bioequivalent to ETM-SOL. However, a higher concentration of ETM was attained in the liver, spleen, and lungs after administration of ETM-ILE than after administration of ETM-SOL. This study found that ETM-ILE had great potential for clinical applications.

Synthesis and characterization of osmotic pump capsules containing polyoxyethylene and pH modifier to control the release of nifedipine.

The aim of this study was to formulate osmotic pump capsules (OPCs) to control the release of nifedipine (NP). NP solid dispersion was prepared by solvent evaporation method. The prepared mixture of NP solid dispersion and various excipients were filled into the commercial HPMC hard capsule shells and then coated with cellulose acetate (CA) solution to form NP-OPC. The CA coating solution consisted of CA as semi-permeable membrane, and Poloxamer 188 as pore formers. The impact of addition agents, citric acid and pore formers on in vitro drug release were investigated. Furthermore, the study has highlighted the impact of paddle speed and the pH value of release media, on the release and compared the release with the commercial controlled release tablets. The in vitro drug release study indicated that drug release could reach 95% in 24 h with optimal formulation, and interestingly model fitting showed that the drug release behavior was closely followed to zero-order release kinetics. The pharmacokinetic studies were performed in rabbits with commercial controlled release tablets as reference, both preparations showed a sustained release effect. Compared with traditional preparation methods of OPCs, the new preparation process was simplified without the operation of laser drilling and the sealing process of capsule body and cap, which improved the feasibility of industrial production.

Antibiotic Cross-linked Micelles with Reduced Toxicity for Multidrug-Resistant Bacterial Sepsis Treatment.

One potential approach to address the rising threat of antibiotic resistance is through novel formulations of established drugs. We designed antibiotic cross-linked micelles (ABC-micelles) by cross-linking the Pluronic F127 block copolymers with an antibiotic itself, via a novel one-pot synthesis in aqueous solution. ABC-micelles enhanced antibiotic encapsulation while also reducing systemic toxicity in mice. Using colistin, a hydrophilic, potent ″last-resort" antibiotic, ABC-micelle encapsulation yield was 80%, with good storage stability. ABC-micelles exhibited an improved safety profile, with a maximum tolerated dose of over 100 mg/kg colistin in mice, at least 16 times higher than the free drug. Colistin-induced nephrotoxicity and neurotoxicity were reduced in ABC-micelles by 10-50-fold. Despite reduced toxicity, ABC-micelles preserved bactericidal activity, and the clinically relevant combination of colistin and rifampicin (co-loaded in the micelles) showed a synergistic antimicrobial effect against antibiotic-resistant strains of Escherichia coli, Pseudomonas aeruginosa, and Acinetobacter baumannii. In a mouse model of sepsis, colistin ABC-micelles showed equivalent efficacy as free colistin but with a substantially higher therapeutic index. Microscopic single-cell imaging of bacteria revealed that ABC-micelles could kill bacteria in a more rapid manner with distinct cell membrane disruption, possibly reflecting a different antimicrobial mechanism from free colistin. This work shows the potential of drug cross-linked micelles as a new class of biomaterials formed from existing antibiotics and represents a new and generalized approach for formulating amine-containing drugs.

Lidocaine-loaded reduced graphene oxide hydrogel for prolongation of effects of local anesthesia: In vitro and in vivo analyses.

Lidocaine is widely used as a local anesthetic for alleviation of post-operative pain and for management of acute and chronic painful conditions. Although several approaches are currently used to prolong the duration of action, an effective strategy to achieve neural blockage for several hours remains to be identified. In this study, a lidocaine-loaded Pluronic® F68-reduced graphene oxide hydrogel was developed to achieve sustained release of lidocaine. Fourier transform infrared spectroscopy, X-ray diffraction, and Raman spectroscopy confirmed the synthesis of Pluronic® F68-reduced graphene oxide. Transmission electron microscopy showed wrinkled, flat nanosheets with micelles attached. The developed hydrogel showed desirable pH, viscosity, adhesiveness, hardness, and cohesiveness for topical application. The ex vivo release study demonstrated the ability of the Pluronic® F68-reduced graphene oxide hydrogel to prolong release up to 10 h, owing to the strong π-π interactions between the graphene oxide and the lidocaine. In comparison with a commercial lidocaine ointment, the developed graphene oxide hydrogel showed sustained anesthetic effect in the radiant heat tail flick test and sciatic nerve block model. Thus, this study demonstrates the potential of using Pluronic® F68-reduced graphene oxide nanocarriers to realize prolonged effects of local anesthesia for effective pain management.

Preparation and Evaluation of Pluronic Lecithin Organogels in Cosmetics.

This study was performed to investigate the application of pluronic lecithin organogel (PLO gel) in cosmetics as a topical drug delivery system. PLO gel was known as transdermal drug delivery systems. It has a very interesting system, owing to their biocompatibility; their amphiphilic nature, facilitating dissolution of various drug classes; and their permeation enhancement properties. We realized that PLO gel has a critical shortcoming of flowability at low temperatures to be used as a cosmetic ingredient. To improve this drawback, this study aimed to find an appropriate quantity of three main compositions of PLO gel, including aqueous phase (poloxamer 407 and water), polyol phase (PEG-400), and oil phase (lecithin and oil), and applied an experimental design using the response surface methodology (RSM). We assessed the elapsed time change by temperature in each PLO gel formulation, observed the morphology of PLO gel using field emission scanning electron microscope (FE-SEM), and determined the gelation point by using differential scanning calorimetry (DSC). Rheology measurements to assess viscoelastic properties were determined by using a rheometer, and skin permeation efficiency was assessed by diffusion system. It was confirmed that three main factors (hydrogenated lecithin, PEG-400, and poloxamer 407) of PLO gel should be balanced without flowability even in cold temperature. Through the RSM, it was assumed that the most effective ingredient was PEG-400 at PLO gel formulation and physical properties. The PLO gel formulation (hydrogenated lecithin 5.0%, PEG-400 20.0%, and poloxamer 407 15.0%) was evaluated as the most suitable formulation for use in cosmetics due to its viscosity and elasticity results. The shape was observed through FE-SEM, and it was confirmed that the PLO gel forms a polymeric bicontinuous microemulsion structure. Regarding the applicability of PLO gel in cosmetics, we verified that PLO gel can be used in a delivery system for active substances. The study findings suggest that PLO gel can be used as one of the ingredients in cosmetic formulations.

Influence of pH-responsive compounds synthesized from chitosan and hyaluronic acid on dual-responsive (pH/temperature) hydrogel drug delivery systems of Cortex Moutan.

The polysaccharide-based pH-responsive compounds, namely, N,N,N-trimethyl chitosan (TMC), polyethylene glycolated hyaluronic acid (PEG-HA), and polysaccharide-based nano-conjugate of hyaluronic acid, chitosan oligosaccharide and alanine [HA-Ala-Chito(oligo)] were chemically synthesized using biopolymers chitosan and hyaluronic acid, and applied here to observe the changes in morphology, pH-stability, mechanical and drug-release behavior, and cytotoxicity of thermo-responsive polymer: Poloxamer 407 (PF127)-based drug delivery systems for traditional Chinese medicine Cortex Moutan (CM). The thermo-responsive hydrogel of PF127 loaded with CM (GelC) was used as control. The dual-responsive (pH/temperature) hydrogels: PF127/TMC/PEG-HA (Gel1) and PF127/HA-Ala-Chito(oligo) (Gel2) showed improved mechanical behavior as obtained by rheology and mechanical agitation study, and pH-stability under various external pH conditions, and those improvements occurred due to the addition of polysaccharide-based pH-responsive compounds in the systems. Both, Gel1 and Gel2 showed better morphology than GelC as obtained by SEM or TEM suggesting that interaction of polysaccharide-based pH-responsive compounds with PF127 in either gel or sol state gave better porous network structure in the hydrogels or more dispersed micellar arrangements in sol-state, respectively. Gel1 showed the highest cumulative drug release (86.5%) after 5 days under mild acidic condition (pH 6.4) suggesting that release behavior of a hydrogel drug carrier was dependent on morphology, mechanical behavior, and pH-stability. The transdermal release (ex-vivo) results indicated that gallic acid, the active marker of CM passed through porcine ear skin and all the formulations showed more or less similar transdermal release properties. The hydrogels loaded with CM showed no cytotoxicity (cell viability >90.0%) on human HaCaT keratinocytes within concentration range of 0.0-20.0 µg/ml as obtained by MTT assay, and cell viability was more than 100% at a concentration of 20.0 µg/ml for Gel2. The formulations without loaded drug namely, Gel1-CM and Gel2-CM exhibited strong anti-bacterial action against gram positive bacteria Staphylococcus aureus.

New Formulation of a Methylseleno-Aspirin Analog with Anticancer Activity towards Colon Cancer.

Aspirin (ASA) has attracted wide interest of numerous scientists worldwide thanks to its chemopreventive and chemotherapeutic effects, particularly in colorectal cancer (CRC). Incorporation of selenium (Se) atom into ASA has greatly increased their anti-tumoral efficacy in CRC compared with the organic counterparts without the Se functionality, such as the promising antitumoral methylseleno-ASA analog (1a). Nevertheless, the efficacy of compound 1a in cancer cells is compromised due to its poor solubility and volatile nature. Thus, 1a has been formulated with native α-, ß- and γ-cyclodextrin (CD), a modified ß-CD (hydroxypropyl ß-CD, HP-ß-CD) and Pluronic F127, all of them non-toxic, biodegradable and FDA approved. Water solubility of 1a is enhanced with ß- and HP- ß-CDs and Pluronic F127. Compound 1a forms inclusion complexes with the CDs and was incorporated in the hydrophobic core of the F127 micelles. Herein, we evaluated the cytotoxic potential of 1a, alone or formulated with ß- and HP- ß-CDs or Pluronic F127, against CRC cells. Remarkably, 1a formulations demonstrated more sustained antitumoral activity toward CRC cells. Hence, ß-CD, HP-ß-CD and Pluronic F127 might be excellent vehicles to improve pharmacological properties of organoselenium compounds with solubility issues and volatile nature.

Thermosensitive hydrogels for local delivery of 5-fluorouracil as neoadjuvant or adjuvant therapy in colorectal cancer.

Spurred by high risk for local tumor recurrence and non-specific toxicity of systemic chemotherapy, clinicians have recently granted a growing interest to locoregional therapeutic strategies. In this perspective, we recently developed a multipurpose thermosensitive hydrogel based on reversible thermogelling properties of poloxamers P407 and P188, a bioadhesive excipient and antineoplastic effect of 5-fluorouracil (5-FU) for the local treatment of colorectal cancer (CRC) in ectopic CT26 murine models. Antitumor efficacy was assessed in mice following intratumoral (IT) injection mimicking neoadjuvant therapy and subcutaneous (SC) application after tumor excision simulating adjuvant therapy. Rheological characterization disclosed that P407/P188/alginate 20/2/1% w/v thermosensitive hydrogel is an injectable free-flowing solution at ambient temperature that undergoes a SOL-GEL transition at 26.0 °C ± 0.6 °C and thereby forms in situ a non-flowing gel at physiological temperature. The generated gel presented an elastic behavior and responded according to a shear-thinning fluid upon shear rate. Although delayed by the addition of alginate 1% w/v, 5-FU is released mainly by diffusion mechanism. The local delivery of 5-FU from P407/P188/alginate/5-FU 20/2/1/0.5% w/v hydrogel in the preclinical tumor models led to a significant tumor growth delay. These results demonstrated that poloxamer-based thermosensitive hydrogels provide a simple and efficient means for local chemotherapeutics delivery.

AT101-Loaded Cubosomes as an Alternative for Improved Glioblastoma Therapy.

INTRODUCTION: AT101, the R-(-)-enantiomer of the cottonseed-derived polyphenol gossypol, is a promising drug in glioblastoma multiforme (GBM) therapy due to its ability to trigger autophagic cell death but also to facilitate apoptosis in tumor cells. It does have some limitations such as poor solubility in water-based media and consequent low bioavailability, which affect its response rate during treatment. To overcome this drawback and to improve the anti-cancer potential of AT101, the use of cubosome-based formulation for AT101 drug delivery has been proposed. This is the first report on the use of cubosomes as AT101 drug carriers in GBM cells. MATERIALS AND METHODS: Cubosomes loaded with AT101 were prepared from glyceryl monooleate (GMO) and the surfactant Pluronic F-127 using the top-down approach. The drug was introduced into the lipid prior to dispersion. Prepared formulations were then subjected to complex physicochemical and biological characterization. RESULTS: Formulations of AT101-loaded cubosomes were highly stable colloids with a high drug entrapment efficiency (97.7%) and a continuous, sustained drug release approaching 35% over 72 h. Using selective and sensitive NMR diffusometry, the drug was shown to be efficiently bound to the lipid-based cubosomes. In vitro imaging studies showed the high efficiency of cubosomal nanoparticles uptake into GBM cells, as well as their marked ability to penetrate into tumor spheroids. Treatment of GBM cells with the AT101-loaded cubosomes, but not with the free drug, induced cytoskeletal rearrangement and shortening of actin fibers. The prepared nanoparticles revealed stronger in vitro cytotoxic effects against GBM cells (A172 and LN229 cell lines), than against normal brain cells (SVGA and HMC3 cell lines). CONCLUSION: The results indicate that GMO-AT101 cubosome formulations are a promising basic tool for alternative approaches to GBM treatment.

Development, characterization and photobiological activity of nanoemulsion containing zinc phthalocyanine for oral infections treatment.

Nanotechnology, when applied to PDT's, allows the encapsulation of ZnPc in nanocarriers, producing thus nanoemulsions that permit the use of ZnPc as photosensitizers. The Enterococcus faecalis and methicillin-resistant Staphylococcus aureus (MRSA) are microorganisms present in biofilms which can cause resistant endodontic infections. The objective of this work is the development and characterization of clove essential oil nanoemulsions containing ZnPc. The formulations were developed according to factorial experimental planning and characterized by the determination of the mean drop size, Polydispersity Index (PdI), content, organoleptic characteristics, stability, morphology, cytotoxicity in the dark and evaluation of the photobiological activity. The experimental planning was able to indicate the maximum amount of ZnPc that could be encapsulated in the nanoemulsion while maintaining droplet size <50 nm and PdI < 0.2. The surface plots for the response variables indicated a robust region for the combination of Pluronic® F-127 and clove oil factors. The result of this study was the choice of the nanoemulsion containing ZnPc solution at 5%, clove oil at 5%, Pluronic® F-127 at 10% and will be codified as ZnPc-NE. The nanoemulsion presented a mean diameter of 30.52 nm, PDI < 0.2 and a concentration of 17.5 µg/mL, as well as stability at room temperature for 180 days. TEM showed that the drops are spherical with nanometric size, which corroborates the results of dynamic light scattering. Concerning the photobiological activity, the ZnPc-NE exhibited MIC 1.09 µg/mL for Enterococcus faecalis and 0.065 µg/mL for MRSA (Methicillin-resistant Staphylococcus aureus). ZnPc-NE showed higher photobiological activity than free ZnPc. Besides, cytotoxicity studies showed that blank-NE (nanoemulsions without PS) showed good antimicrobial activity. Thus, clove oil nanoemulsion is an excellent nanocarrier to promote the photobiological activity of the ZnPc against pathogenic microorganisms.

In Silico Factorial Screening and Optimization of Chitosan Based Gel for Urapidil Loaded Microparticle using Reduced Factorial Design.

OBJECTIVE: Literature study revealed the poor mechanical strength of chitosan-based microparticles. Our research aimed at developing sufficient strength of microparticle with a suitable concentration of chitosan and non-ionic surfactants such as poloxamer-188 (pluronic). It also aimed to develop and study the effect of variables for prepared microparticles utilizing insilico screening methodology, such as reduced factorial design, followed by optimization. METHODS: Preliminary trial batches were prepared with variable concentration of chitosan and poloxamer-188 utilizing cross-linked ion-gelation technique. A 20% w/v sodium citrate solution was used as a cross-linking solution. The resolution-IV of 24-1 reduced factorial design was selected to screen the possible and significant independent variables or factors in the dosage form design. A total number of eight runs were suggested by statistical software and responses were recorded. The responses such as spreadability, pH, viscosity and percentage of drug released at 12 h were considered in the screening study. Based on the result, selected factors were included in the optimization technique, including graphical and numerical methods. RESULTS: The signified factors based on reduced two-level factorial screening design with randomized subtype, were identified by Half-normal and Pareto chart. Mathematical fitting and analysis were performed by the factorial equation during the optimization process. The validation and fitting of models were suggested and evaluated by p-value, adjusted R2, and predicted R2 values. The significant and non-significant terms were evaluated, followed by finding the optimal concentration and region with yellow color highlighted in an overlay plot. Based on the data obtained by the overlay study, the final formulation batch was prepared and the observed value was found to be pretty much nearer as compared to predicted values. Drug-polymer interaction study included attenuated total reflectance, differential scanning calorimetry, and X-Ray diffraction study. CONCLUSION: The principal of the study design was based on finding the prefixed set parameter values utilizing the concept of in-silico screening technique and optimization with a minimal number of trials and study expenses. It concluded that Poloxamer-188 (0.94%), chitosan (2.38%), swelling time (1.81 h), and parts of chitosan (78.51%) in a formulation batch would fulfill the predetermined parameter with specific values.