Using a B-Phycoerythrin Extract as a Natural Colorant: Application in Milk-Based Products.

Nowadays, there is a growing interest in finding new coloring molecules of natural origin that can increase and diversify the offer of natural food dyes already present in the market. In the present work, a B-phycoerythrin extract from the microalgae Porphyridium cruentum was tested as a food colorant in milk-based products. Using spectroscopy and colorimetry, the extract was characterized and gave evidence of good properties and good stability in the pH range between 4.0 and 9.0. Coloring studies were conducted to demonstrate that samples carrying the pink extract could be used for simulating the pink color of marketed milk-based products. The staining factors, representing the amount of pink protein to be added to reproduce the color of strawberry commercial products, ranged between 1.6 mg/L and 49.5 mg/L, being sufficiently low in all samples. Additionally, color stability during a short period of cold storage was studied: it demonstrated that the three tested types of dairy products remained stable throughout the 11-day analysis period with no significant changes. These results prove the potential of the B-phycoerythrin extract as a natural colorant and alternative ingredient to synthetic coloring molecules.

Rheological characterization of Porphyridium sordidum and Porphyridium purpureum exopolysaccharides.

Porphyridium exopolysaccharides (EPSs), which contain sulfate and methyl groups, have a similar potential for use in multiple industrial applications as macroalgae counterparts but lack detailed characterization. For this reason, we produced 0.21 g L-1 of P. sordidum EPS and 0.17 g L-1P. purpureum EPS, followed by a thorough rheological characterization in respect to their differences in monomer composition, sulfate concentrations and methyl patterns. Furthermore, the effect of NaCl and CaCl2 was evaluated, and the effect of high salinity media on the rheological properties of the biopolymers was analyzed. Both Porphyridium EPSs show a remarkable stability at high temperature and under the effect of mono- and divalent cations, and high salinity cultivation medium, which was evidenced by the rheological properties of the EPS. This feature is not displayed by many carbohydrate polymers, making it possible to enrich current applications in which EPS are used.

Effects of Different Environmental Factors on the Growth and Bioactive Substance Accumulation of Porphyridium purpureum.

Genus Porphyridium is a primitive single-celled red algae widely distributed in seawater, freshwater, and moist soil. It can synthesize bioactive substances such as phycoerythrin, extracellular polysaccharides and polyunsaturated fatty acids during the growth process. In this paper, the culture and bioactive substance yield of Porphyridium purpureum were studied by setting salinity, nitrogen-to-phosphorus ratio, and pH at different gradient levels. The results showed that the optimal conditions for the growth of P. purpureum were salinity 34 ppt, nitrogen-to-phosphorus ratio 169:1, and pH 8; the optimal conditions for obtaining the polysaccharides were salinity 17 ppt, nitrogen-to-phosphorus ratio 14:1, and pH 8; the optimal conditions for obtaining phycoerythrin were salinity 17 ppt, nitrogen-to-phosphorus ratio 68:1, and pH 8; the optimal conditions for obtaining the lipids were salinity 34 ppt, nitrogen-to-phosphorus ratio 1:1, and pH 8. In actual production applications, culture conditions should be set according to different product accumulation purposes in order to achieve the optimal production efficiency.

Impact of different sequences of mechanical and thermal processing on the rheological properties of Porphyridium cruentum and Chlorella vulgaris as functional food ingredients.

Microalgae are a promising and sustainable source for enhancing the nutritional value of food products. Moreover, incorporation of the total biomass might contribute to the structural properties of the enriched food product. Our previous study demonstrated the potential of Porphyridium cruentum and Chlorella vulgaris as multifunctional food ingredients, as they displayed interesting rheological properties after applying a specific combination of mechanical and thermal processing. The aim of the current study was to investigate the impact of a different sequence of high pressure homogenization (HPH) and thermal processing on the thickening and gelling potential of these microalgal biomasses in aqueous suspensions. Thermal processing largely increased the gel strength and viscosity of both microalgae, which was ascribed to larger and stronger aggregates as a result of partial solubilization of polymers, while subsequent HPH generally reduced the rheological properties. Interestingly, large amounts of intact cells were still observed for both microalgae when HPH was performed after a thermal treatment, irrespective of the applied homogenization pressure, implying that cell disruption was hindered by the preceding thermal treatment. Although thermal processing was regarded as the most effective processing technique to obtain increased rheological properties, the combination with a preceding HPH treatment should still be considered when cell disruption is desired, for instance to increase the bioavailability of intracellular components. Finally, biomass of P. cruentum showed the largest potential for use as a structuring agent, as the gel strength and viscosity in thermally treated suspensions of this microalga were about 10 times higher than for C. vulgaris.

Influence of sulphate on the composition and antibacterial and antiviral properties of the exopolysaccharide from Porphyridium cruentum.

AIMS: The influence of two culture media and three different concentrations of sulphate in the medium on the growth of two strains of Porphyridium cruentum and on the production, composition and viscoelastic characteristics, and antimicrobial properties of the sulphated exopolysaccharide (EPS) were studied. MAIN METHODS: A Bohlin C50 rheometer was used to evaluate the viscosity and elasticity of the EPS solutions. HSV virus, types 1 and 2, Vaccinia virus and Vesicular stomatitis virus were used along with two Gram-negative (Escherichia coli and Salmonella enteritidis) and one Gram-positive (Staphylococcus aureus) bacteria, for testing the antimicrobial activity of EPS. KEY-FINDINGS: The growth of microalgae was higher in NTIP medium and the production of EPS was enhanced by sulphate 21mM. The protein content of the EPS was enhanced by the addition of sulphate 52mM and 104mM; this concentration also induced an increase in sulphate content of the EPS. However, neither the contents of EPS in carbohydrates and uronic acids were affected by the culture medium supplementation in sulphate. In general, the EPS from the Spanish strain presented a higher antiviral activity than the EPS from the Israeli strain. All EPS extracts revealed a strong activity against V. stomatitis virus, higher than the activity of all chemical compounds tested. The EPS from the Israeli strain also presented antibacterial activity against S. enteritidis. SIGNIFICANCE: Enrichment of the culture medium with sulphate improved protein and sulphate content of EPS. EPS extracts presented a relevant activity against V. stomatitis virus and S. enteritidis bacterium.

Effect of drying on the biological activities of a red microalgal polysaccharide.

The red microalga Porphyridium sp. produces a polysaccharide exhibiting a variety of biological activities with potential for medical and cosmetic uses. For this reason, it is important that the drying process, which is the end point of production, should not destroy the natural characteristics of the material. The objective of this study was to evaluate the effect of drying at temperatures ranging from 40 to 140 degrees C on the bioactivities of the polysaccharide. Drying the polysaccharide at temperatures above 90 degrees C caused a significant decline in its biological activities (antiviral and anti-cell proliferation) and reduced elasticity, viscosity, and intrinsic viscosity relative to lyophilized polysaccharide and to the starting product. The relationship between molecular weight and intrinsic viscosity indicated that the polysaccharide takes a rigid coil conformation, which stiffens as a result of drying. FTIR analysis revealed that drying caused both significant conformational alterations in the polymer chains and changes in the interaction between the polysaccharide and the glycoprotein to which it is noncovalently associated. Differential scanning calorimetry analysis of the water adsorbed on the charged groups of the polysaccharide showed that drying at higher temperatures increased the bound water content due to dissociation of the polymer chains. Thus, it is recommended that the polysaccharide be dried in a two-step process in which free water is removed by convection and bound freezing water is removed by lyphophilization.