RESUMO
OBJECTVES: Different surface preparation and treatment methods may have dissimilar effects on the microleakage of composite resin. This study was conducted to determine the deproteinizing effect of 10% bromelain enzyme, 10% papain enzyme, CO2 , and erbium-YAG laser in regard to decrease in the microleakage of composite restorations. MATERIALS AND METHODS: Thirty teeth were selected and 60 class V cavities were prepared on the lingual and buccal sides. They were divided into six groups (n = 10): Group 1, phosphoric acid gel; Group 2, bromelain enzyme 10%; Group 3, papain enzyme 10%; Group 4, mixed papain and bromelain enzymes 10%; Group 5, CO2 laser; and Group 6, erbium-YAG laser. They were stored in basic fuchsine and dye penetration was evaluated. Kruskal-Wallis and Mann-Whitney tests were used for statistical analysis, p < 0.05 RESULTS: In both occlusal and gingival margins, comparison of microleakage between groups 1, 2, 3, 4, and 5 showed no significant differences (p = 1) and group 6 had a significant difference with other groups (p Ë 0.001). CONCLUSIONS: Microleakage of composite resin in the dentin surface was not affected significantly using either bromelain or papain 10% enzymes or erbium laser. However, CO2 laser had a negative effect on the enamel and dentin margins and increased the microleakage. Erbium laser showed a better effect than enzymes on microleakage.
Assuntos
Cárie Dentária , Lasers de Estado Sólido , Humanos , Érbio , Dióxido de Carbono , Papaína , Bromelaínas , Preparo da Cavidade Dentária/métodos , Resinas Compostas , Lasers de Estado Sólido/uso terapêuticoRESUMO
OBJECTIVES: Bromelain is a potent proteolytic enzyme that has a unique functionality makes it valuable for various therapeutic purposes. This study aimed to develop three novel formulations based on bromelain to be used as chemomechanical caries removal agents. METHODS: The novel agents were prepared using different concentrations of bromelain (10-40 wt. %), with and without 0.1-0.3 wt. % chloramine T or 0.5-1.5 wt. % chlorhexidine (CHX). Based on the enzymatic activity test, three formulations were selected; 30 % bromelain (F1), 30 % bromelain-0.1 % chloramine (F2) and 30 % bromelain-1.5 % CHX (F3). The assessments included molecular docking, Fourier-transform infrared spectroscopy (FTIR), viscosity and pH measurements. The efficiency of caries removal was assessed by DIAGNOdent pen, measuring the excavation time and number of applications, followed by a morphological evaluation of the remaining dentine using scanning electron microscopy (SEM). The results were compared to Brix 3000 as a control. RESULTS: The chloramine and chlorhexidine were chemically compatible with bromelain without compromising the enzyme activity. All experimental formulations showed higher viscosity and pH in comparison to Brix 3000. The DIAGNOdent readings were <20 in all groups, and the lowest readings were observed in F2. The excavation time and number of applications were lowest in F2 and F1. Both F2 and F3 produced smooth dentine surfaces with less tissue debris, but more patent dentine tubules were observed in F1 and F2. CONCLUSIONS: The bromelain-contained formulations showed a potential to be used as chemomechanical caries removal agents in vitro. Further laboratory and clinical studies are needed to validate this claim. CLINICAL SIGNIFICANCE: The bromelain from pineapple stem has broad specificity for cleavage the peptide bonds in denatured protein to facilitate their removal. The study proved the efficiency of this enzyme to remove the dental caries chemomechanically when used alone or conjugated with chloramine and/or chlorhexidine to enhance the disinfecting and cleansing properties.
Assuntos
Bromelaínas , Cárie Dentária , Humanos , Bromelaínas/farmacologia , Cloraminas , Cárie Dentária/tratamento farmacológico , Clorexidina/farmacologia , Suscetibilidade à Cárie Dentária , Simulação de Acoplamento Molecular , Dentina , Preparo da Cavidade Dentária/métodosRESUMO
La amelogénesis imperfecta (AI) es un grupo de tras-tornos hereditarios, clínica y etiológicamente hete-rogéneos, derivados de mutaciones genéticas, que se caracterizan por anomalías cualitativas y cuanti-tativas del desarrollo del esmalte, pudiendo afectar la dentición primaria y/o permanente. El tratamiento del paciente con AI es complejo y multidiscliplinario; supone un desafío para el odontólogo, ya que por lo general están involucradas todas las piezas dentarias y afecta no solo la salud buco dental sino el aspecto emocional y psicológico de los pacientes. Con el obje-tivo de describir el tratamiento integral y rehabilita-dor realizado en una paciente con diagnóstico de AI tipo III, se reporta el caso de un adolescente de sexo femenino de 13 años, que concurrió en demanda de atención a la Cátedra de Odontología Integral Niños de la Facultad de Odontología de la Universidad de Buenos Aires (FOUBA), cuyo motivo de consulta fue la apariencia estética y la hipersensibilidad de sus pie-zas dentarias. Durante el examen clínico intraoral, se observó que todas las piezas dentarias presentaban un esmalte rugoso, blando, con irregularidades y una coloración amarronada, compatible con diagnóstico de Amelogénesis Imperfecta tipo III hipomineralizada. Conclusión: El tratamiento rehabilitador de la AI en los pacientes en crecimiento y desarrollo estará diri-gido a intervenir de manera integral y temprana para resolver la apariencia estética y funcional, evitar las repercusiones sociales y emocionales, y acompañar a los pacientes y sus familias (AU)
Amelogenesis imperfecta (AI) is a group of clinically and etiologically heterogeneous hereditary disorders, derived from genetic mutations, characterized by qualitative and quantitative anomalies of enamel development, which can affect primary and/or permanent dentition. The treatment of patients with AI is complex and multidisciplinary, it is a challenge for the dentist, since in general all the teeth are involved and it affects not only oral health but also the emotional and psychological aspect of the patients. Objective: To describe the comprehensive and rehabilitative treatment carried out in an adolescent patient with a diagnosis of type III AI. Case report: The case of a 13-year-old female patient, who required dental attention at the Department of Dentistry for Children of the School of Dentistry of the University of Buenos Aires, whose reason for consultation was esthetic appearance and hypersensitivity of her teeth. In the intraoral clinical examination, it was observed that all the teeth had rough, soft enamel, with irregularities and a brownish color, compatible with the diagnosis of type III hypomineralized Amelogenesis Imperfecta. Conclusion: Rehabilitative treatment of AI in growing and developing patients will be aimed at early and comprehensive intervention to resolve esthetic and functional appearance, avoid social and emotional repercussions and accompany patients and their families (AU)
Assuntos
Humanos , Feminino , Adolescente , Assistência Odontológica para Crianças , Coroas , Amelogênese Imperfeita/terapia , Equipe de Assistência ao Paciente , Faculdades de Odontologia , Preparo da Cavidade Dentária/métodos , Esmalte Dentário/patologia , Hipoplasia do Esmalte Dentário/etiologia , Restauração Dentária Permanente/métodos , Estética Dentária , Amelogênese Imperfeita/classificaçãoRESUMO
AIMS: The aim of this study was to evaluation the treatment success of the short post technique (mushroom restoration) using a composite resin in severely decayed primary anterior teeth after 6, 12, and 18 months after treatment. METHODS: Eighteen children aged 3-5 years with severely decayed primary maxillary anterior teeth (60 anterior maxillary primary teeth in total) were included. Patients were treated under general anesthesia (GA). After pulpectomy, a "mushroom shape" was formed in the root canals for the purpose of retention, and the root canals were filled with zinc oxide-eugenol (ZOE), and the teeth were restored with composite resin. The status of treatment was evaluated clinically and radiographically for periapical radiolucency, pathological root resorption, marginal fracture, and loss of restoration for each treated tooth. All findings were recorded. RESULTS: As a result of the evaluation criteria, the success rates at 6, 12 and 18 months were 86%, 80%, and 71%, respectively. None of the teeth showed apical radiolucency or pathological root resorption at the end of the 18th month period. CONCLUSION: The short-post (mushroom restorations) technique is a clinically acceptable alternative method for restoration of severely decayed primary teeth. This study supports the feasibility of treatment with this technique for pediatric patients treated under GA.
Assuntos
Restauração Dentária Permanente/métodos , Técnica para Retentor Intrarradicular , Pulpectomia/métodos , Materiais Restauradores do Canal Radicular/uso terapêutico , Dente Decíduo/cirurgia , Cimento de Óxido de Zinco e Eugenol/uso terapêutico , Anestesia Geral , Pré-Escolar , Resinas Compostas/química , Cárie Dentária/complicações , Preparo da Cavidade Dentária , Extravasamento de Materiais Terapêuticos e Diagnósticos/complicações , Feminino , Humanos , Masculino , Maxila , Pulpectomia/efeitos adversos , Reabsorção da Raiz , Traumatismos Dentários/complicações , Resultado do TratamentoRESUMO
Objective: This study was conducted to (1) evaluate a new method for accurately and automatically preparing dental implant cavities; (2) investigate the quantitative relationships between the number of focal-plane additive pulse layers (n) in two-dimensional ablation, the Z-axis feed rate, and the ablation depth (d) during cortical-bone ablation using a numerically controlled three-axis picosecond laser; and (3) establish appropriate methods for precise ablation control. Materials and methods: Two-dimensional ablation was performed on swine-rib blocks in the focal plane on a preset circular path using a picosecond laser device and an in-house-developed three-axis numerically controlled micro-laser galvanometer scanner. The maximum two-dimensional d and the quantitative relationship between n and d within the maximum d were consequently obtained. The measured and theoretical values of the ablated cavities were then compared to obtain n and d values corresponding to the minimum difference, and to evaluate the error in d, resulting in a higher-accuracy d value (i.e., single-step ablation depth) being obtained. Results: The diameter and deep errors between the measured and design data for 24 cavities were 2.76 ± 1.51 and 10.23 ± 4.82 µm, respectively. Thus, high-quality cortical-bone cavities preparation was achieved using a picosecond laser with the parameters employed in this study. Conclusions: Precise control of cortical-bone ablation using a picosecond laser can be attained by optimizing the single-step ablation parameters.
Assuntos
Osso Cortical/efeitos da radiação , Preparo da Cavidade Dentária/métodos , Terapia com Luz de Baixa Intensidade , Animais , Modelos Animais , Suínos , Técnicas de Cultura de TecidosRESUMO
Intraoral air abrasion is a technique in which abrasive particles are used to remove or alter tooth structure. Intraoral air-abrasion devices are available as standalone units that offer a variety of customization, such as modifications to air pressure, particle flow rate, and water flow rate, or as attachments to a dental unit, allowing for a smaller footprint in the operatory. Some devices used for intraoral air abrasion are able to limit excess particle spray through utilization of a shroud of water. Aluminum oxide, or alumina, is the most commonly used and most abrasive type of air-abrasion medium; it is used mostly to roughen or remove tooth structure. Other types of particles are intended for cleaning tooth surfaces. Previous research has reported negative and positive effects, as well as no effect, of air abrasion on the bond to dentin and enamel. The results of a study performed for this review show that air abrasion to both dentin and enamel with alumina at 60-psi pressure produced a visible roughening texture but did not negatively affect bond strength. Clinical applications for intraoral air abrasion in restorative dentistry include cavity preparation, cleaning of preparations, and removal of plaque and stain prior to restoring a tooth.
Assuntos
Abrasão Dental por Ar , Preparo da Cavidade Dentária , Óxido de Alumínio , Esmalte Dentário , Dentina , Teste de Materiais , Propriedades de SuperfícieRESUMO
AIM: The aim of the study was to evaluate and compare bromelain with papain as the chemomechanical caries removal agent in relation to their efficacy. MATERIALS AND METHODS: Thirty extracted primary molars with active carious lesion extending into dentin were selected. The samples were randomly divided into groups by sectioning the samples into two halves. Group I-cavity prepared using papain gel; group II-cavity prepared using bromelain gel. Time taken for caries removal in both the groups (I and II) was recorded with the help of a stopwatch. Following caries removal, the amount of remaining demineralized dentin was measured with the help of stereomicroscope and weld check (biological image analysis) software. RESULTS: t test is used to evaluate the significance of study parameters on continuous scale between two groups on metric parameters. The mean of residual carious dentin thickness obtained from the group II (bromelain) was 36.74 µm, which was much lower than that obtained from group I (papain) with a mean of 73.84 µm. The mean time taken in the group II (bromelain) was 335.30 seconds which was nearly equal to the mean time of group I (papain) of 352.33 seconds. CONCLUSION: The amount of remaining demineralized dentin was found to be lower in bromelain group than the papain group and time taken for the carious dentin removal was almost found similar in both bromelain and papain groups. It may be concluded that bromelain was more effective in amount of caries removal than papain. CLINICAL SIGNIFICANCE: Chemomechanical caries removal with the organic gels pose a great benefit as they are less invasive and has low side effects and cost-effective. How to cite this article: Reddy VK, Nagar P, Reddy S, et al. Bromelain vs Papain Gel for Caries Removal in Primary Teeth. J Contemp Dent Pract 2019;20(11):1345-1349.
Assuntos
Cárie Dentária , Papaína , Bromelaínas , Preparo da Cavidade Dentária , Dentina , Géis , Humanos , Dente DecíduoRESUMO
PURPOSE: To evaluate the effectiveness of low-level laser therapy (LLLT) on dental pain felt during cavity preparation of carious lesions in permanent teeth of adults. METHODS: The study was carried out on 88 teeth with dental caries requiring class I restorations in 24 subjects with a pain score ≥ 7 but < 10 measured using a 0-10 visual analogue scale (VAS) in a preliminary test of pain threshold (PTPT) for each subject receiving a class I cavity preparation on another tooth without local anesthesia. The 88 teeth included were randomly allocated to test and control groups, each with 44 teeth. All teeth were treated with LLLT prior to the mechanical preparation of the cavity without local anesthesia, except that the laser device was kept in idle mode in the control group. After cavity preparation, subjects scored pain intensity using the VAS. The Wilcoxon test was used to analyze data and the values with P< 0.05 were considered significant. RESULTS: All subjects scored a pain reduction in the test group compared with the control group (P< 0.0001), with a reduction of 42% and 16%, respectively, compared to pain felt during the PTPT. The use of LLLT prior to mechanical preparation of a cavity by lowering pain intensity might reduce the quantity of drugs used for pain control required during restorative procedures. CLINICAL SIGNIFICANCE: Dental treatments could be more comfortable by using a preliminary phase of low-power lasers, limiting or eliminating pharmacological agents for pain control.
Assuntos
Cárie Dentária , Preparo da Cavidade Dentária , Terapia a Laser , Terapia com Luz de Baixa Intensidade , Adulto , Restauração Dentária Permanente , Humanos , Dor , Distribuição AleatóriaRESUMO
OBJECTIVE: The aim of this study was to evaluate the influence of cavity preparation with different Er,Cr:YSGG laser handpieces on microleakage of different posterior composite restorations. METHODS: Fifty-four extracted intact human premolars were randomly assigned to three groups according to cavity preparation method: Bur Group: high-speed diamond bur (Diatech), MD Group: Er,Cr:YSGG laser Waterlase MD handpiece (Biolase Millennium II), and Turbo Group: Er,Cr:YSGG laser Waterlase MD TURBO handpiece (Biolase Millennium II). One hundred eight Class II slot cavities were prepared on the mesial and distal proximal surfaces of each tooth, and the cavity preparation times required were determined. The groups were then subdivided according to the restorative systems used (n = 12): a conventional methacrylate-based microhybrid composite (Filtek P60+Adper Single Bond 2/3M); a silorane-based resin composite (Filtek Silorane+Silorane System Adhesive/3M); and a nanohybrid methacrylate-based composite (Kalore+G-Bond/GC). The restorative systems were applied according to the manufacturers' recommendations. Following thermocycling (X5000; 5°C-55°C), the teeth were coated with nail varnish except the restoration margins, immersed in 0.5% basic fuchsin dye solution, and sectioned in a mesiodistal direction. Dye penetration was evaluated under a light microscope for occlusal and cervical margins. Data were analyzed with one-way ANOVA and chi-square tests (p < 0.05). RESULTS: The cavity preparation time (mean ± SD) required for Bur, MD, and Turbo group was 31.25 ± 3.82, 222.94 ± 15.85, and 92.5 ± 7.42 sec, respectively, and the differences among the groups were statistically significant (p < 0.05). Comparing the occlusal and cervical microleakage scores, no statistically significant differences were found among the groups and subgroups (p > 0.05). CONCLUSIONS: Er;Cr:YSGG laser cavity preparation with the Turbo handpiece needed shorter time than the MD handpiece, although it needed longer time than the conventional diamond bur. The use of different handpieces of Er,Cr:YSGG laser did not differ from conventional preparation with diamond bur in terms of microleakage with the tested methacrylate- and silorane-based posterior composite restorative systems.
Assuntos
Resinas Compostas , Preparo da Cavidade Dentária/instrumentação , Infiltração Dentária/prevenção & controle , Lasers de Estado Sólido/uso terapêutico , Terapia com Luz de Baixa Intensidade/instrumentação , Metacrilatos , Resinas de Silorano , Dente Pré-Molar , Humanos , Técnicas de Cultura de TecidosRESUMO
Objectives No recent study has addressed the effect of diving conditions (pressure increase) on adhesive restorations. We evaluated the impact of a simulated hyperbaric environment on microleakage of the dentine-composite resin interface. The ultimate aim was to propose recommendations for restorative dentistry for patients who are divers to limit barodontalgia (dental pain caused by pressure variations of the environment) and may lead to dangerous sequelae.Methods We bonded 20 dentine disks by using an adhesive system (Scothbond Universal) to ten intact composite cylinders and ten composite cylinders with porosity (Ceram X mono). For each group, the samples were divided into two subgroups, one submitted to a simulated hyperbaric environment and the other to an ambient environment. All samples were immersed in a silver nitrate solution to evaluate microleakage at the interface after analysis with a camera.Results Dye percolation for groups in the hyperbaric environment was greater than groups in ambient environment. For each subgroup, dye percolation was greater for samples with than without porosity.Conclusions High percolation percentages demonstrate that our simulated hyperbaric condition led to loss of sealing at the dentine-composite resin interface, especially with porous composites.Clinical significance Respect of the protocol and the quality of condensation for adhesive restorations are important in all clinical situations, especially for patients who are divers. A more interventionist approach must be adopted with these patients.
Assuntos
Restauração Dentária Permanente , Oxigenoterapia Hiperbárica , Cimentos de Resina , Resinas Compostas , Colagem Dentária , Preparo da Cavidade Dentária , Cimentos Dentários , Infiltração Dentária , HumanosRESUMO
OBJECTIVES: To compare the effectiveness of different oral analgesics for relieving pain and distress in adults following the extraction of teeth and deep cavity preparations under local anesthesia. Methods: This randomized controlled study was conducted between November 2015 and May 2016. One hundred and twenty patients were randomly allocated to 3 groups. Forty patients were in the paracetamol (1 gram) group, 40 in the ibuprofen (400 mg) group and 40 in the diclofenac potassium (50 mg) group. Evaluation of the post extraction and deep cavity preparations pain was made by patients immediately postoperatively, 2, 4 and 6 hours postoperatively on standard 100 mm visual analogue scales (VAS). Furthermore, each patient was observed preoperatively and immediately postoperatively for signs of distress by using a 5 point face scale. Results: There were significant decreases in mean pain VAS scores for diclofenac potassium group compared to paracetamol and ibuprofen groups at 4 hours postoperatively (one-way Analysis of Variance: p=0.0001, p=0.001) and 6 hours postoperatively (p=0.04, p=0.005). Changes in distress scores from the preoperative score to the postoperative score were made using the paired sample t-test. There were significant decreases in distress scores between the preoperative and postoperative scores (p=0.0001). Conclusions: Diclofenac potassium was more effective than paracetamol or ibuprofen for reducing postoperative pain associated with tooth extraction and deep cavity preparation. Patients' distress levels can be alleviated by using preemptive analgesics.
Assuntos
Acetaminofen/uso terapêutico , Anti-Inflamatórios não Esteroides/uso terapêutico , Preparo da Cavidade Dentária/métodos , Diclofenaco/uso terapêutico , Ibuprofeno/uso terapêutico , Dor Pós-Operatória/prevenção & controle , Extração Dentária/métodos , Adulto , Anestesia Local , Feminino , Humanos , Masculino , Medição da DorRESUMO
BACKGROUND AND OBJECTIVES: Conservative caries removal has become an integral part of minimally invasive dentistry (MID). Polymer burs and chemomechanical caries removal are two feasible methods of MID. The objective of this study was to assess and compare the efficacy of polymer bur and chemomechanical caries removal agent clinically and microbiologically for selective removal of infected dentin. METHODS: A total of fifty primary second molars with occlusal decay involving dentin were selected from 25 patients aged between 5 and 9 years. They were randomly allocated to Group A (polymer bur group) and Group B (Carie-Care group) for caries removal. Completeness of caries excavation was assessed clinically with the application of caries detector dye. Dentinal samples were collected before and after caries removal and cultured in Luria-Bertani Agar, and total viable count was assessed. All the teeth after caries excavation were restored with Type 2 glass ionomer cement. The data obtained was tabulated and statistically analyzed using paired t-test and Chi-square test. RESULTS: There was a statistically significant reduction in the mean microbial count before and after treatment in polymer bur group and Carie-Care group. The reduction in mean microbial count was found significantly higher in polymer bur group compared to Carie-Care group. There was no significant association was observed between the two groups when efficacy was assessed clinically. CONCLUSIONS: Both polymer bur and Carie-Care were efficient caries removal agents when assessed clinically and microbiologically. Polymer bur was found to be more effective than Carie-Care when assessed microbiologically.
Assuntos
Carica , Cárie Dentária/terapia , Preparo da Cavidade Dentária/métodos , Instrumentos Odontológicos , Extratos Vegetais/uso terapêutico , Criança , Pré-Escolar , Preparo da Cavidade Dentária/instrumentação , Terapia Enzimática , Cimentos de Ionômeros de Vidro , Humanos , Dente Molar , Polímeros , Dente DecíduoRESUMO
OBJECTIVES: The objective of this study was to evaluate longitudinally the composite restorations, performed in cavities prepared by Er:YAG or conventional bur, and dentin re-wetting with water or chlorhexidine. MATERIALS AND METHODS: Twenty individuals with four active caries with cavitation reaching the dentin located on the occlusal surface of molars counterparts are selected. The teeth of each individual were randomly assigned into four groups: (I) Er:YAG laser (260 mJ/4 Hz) re-wetting with chlorhexidine, (II) Er:YAG laser (260 mJ/4 Hz) re-wetting with deionized water, (III) conventional method re-wetting with chlorhexidine, and (IV) conventional method re-wetting with deionized water. The teeth were isolated, prepared cavities, phosphoric acid etching, and re-wetting according to previously assigned method. Restoration was performed employing the Single Bond 2 and Z350XT resin. Clinical follow-up was held after the polishing of the restoration (baseline) and 6 and 12 months of the making of the restoration using the modified USPHS criteria. The restorations were qualitatively analyzed by means of photographs. In the evaluation period, replicas of the restorations were analyzed by SEM. Data were analyzed by statistics using chi-square test (p < 0.05). RESULTS: After 12 months of clinical evaluation, groups prepared with laser and re-wetting with chlorhexidine and water showed the lowest marginal staining value. There was no statistical difference between the groups for other factors. SEM analysis revealed that a non-expressive amount of restorations showed gaps and irregularities of tooth-restoration interface after 6 and 12 months compared to the baseline. CONCLUSION: The restorations performed in laser-prepared cavities, regardless of the re-wetting, presented the best clinical performance over the evaluated period. CLINICAL RELEVANCE: Laser-prepared teeth, regardless of re-wetting, showed greater resistance to marginal discoloration.
Assuntos
Resinas Compostas/química , Cárie Dentária/terapia , Preparo da Cavidade Dentária/métodos , Lasers de Estado Sólido/uso terapêutico , Condicionamento Ácido do Dente , Criança , Clorexidina/uso terapêutico , Cimentos Dentários , Feminino , Humanos , Cura Luminosa de Adesivos Dentários , Masculino , Microscopia Eletrônica de Varredura , Resultado do Tratamento , Água , MolhabilidadeRESUMO
INTRODUCTION: Chemomechanical caries removal (CMCR) is an effective method of caries removal especially for primary teeth as they cause less discomfort when compared with conventional caries removal. The most significant thing about caries removal is the elimination of cariogenic bacteria. This study compares the antibacterial activity of two CMCR gels. MATERIALS AND METHODS: A total of 40 primary molar teeth with carious dentin were split along the long axis in a laboratory. Total viable count (TVC) was taken for the teeth before splitting as a measure of colony-forming units per milliliter (CFU/mL). Each half was treated with either Carisolv or Carie-Care CMCR gels. Clean dentin samples were evaluated for Streptococcus mutans (SM) and Lactobacillus acidophilus (LB) after removal of carious tissue using the caries removal gels using serial dilutions and incubating on specific agar plates. RESULTS: The results showed significant reduction in mean TVC after use of both the CMCR gels. Both gels reduced the CFU/mL of SM and LB to a significant level (p < 0.05). However, there was no significant difference between the antibacterial activities of the two CMCR gels. CONCLUSION: The CMCR gels (Carisolv and Carie-Care) significantly reduced the residual TVC as well as SM and LB in carious primary dentin. Both CMCR gels had a similar antibacterial activity on the carious dentin of primary teeth. CLINICAL SIGNIFICANCE: The CMCR gels tested have a significant antibacterial activity and can be effectively used for elimination of caries-causing bacteria in primary teeth.
Assuntos
Antibacterianos/farmacologia , Cárie Dentária/terapia , Preparo da Cavidade Dentária/métodos , Ácido Glutâmico/farmacologia , Lactobacillus acidophilus/efeitos dos fármacos , Leucina/farmacologia , Lisina/farmacologia , Extratos Vegetais/farmacologia , Streptococcus mutans/efeitos dos fármacos , Carica , Cárie Dentária/microbiologia , Dentina/microbiologia , Géis , Humanos , Técnicas In Vitro , Lactobacillus acidophilus/isolamento & purificação , Dente Molar , Streptococcus mutans/isolamento & purificação , Dente DecíduoRESUMO
AIM: Study the topographic features of dentin after caries removal with a chemomechanical agent (Papacarie) compared with the conventional drilling method. STUDY DESIGN: The sample included 7 exfoliated and extracted primary teeth with carious dentin lesions, not reaching the pulp. Each tooth was sectioned longitudinally through the center of the carious lesions into two halves. The teeth were then divided into two groups according to the method of caries removal. Following caries removal, dentin topography and the cut section were examined using the scanning electron microscope. RESULTS: Papacarie produced an irregular, porous, rough and globular dentin appearance. The dentin surfaces were generally free of smear layer, visible bacteria and the dentinal tubules were opened. The dentin cut surfaces showed patent dentinal tubules with open orifices. The drilling method created a smooth and amorphous surface with a continuous smear layer occluding the dentinal tubules. Numerous bacteria were also observed. The cut dentin surfaces showed patent dentinal tubules with their orifices plugged with smear layer. CONCLUSIONS: Papacarie produced a rough and porous surface with partial or complete removal of the smear layer and opened dentinal tubules, while the drill produced a smooth surface with uniform smear layer occluding the dentinal tubules.
Assuntos
Preparo da Cavidade Dentária/métodos , Dentina/ultraestrutura , Papaína/uso terapêutico , Dente Decíduo/ultraestrutura , Bactérias/ultraestrutura , Colágeno/ultraestrutura , Cárie Dentária/microbiologia , Cárie Dentária/patologia , Cárie Dentária/terapia , Preparo da Cavidade Dentária/instrumentação , Equipamentos Odontológicos de Alta Rotação , Dentina/efeitos dos fármacos , Dentina/microbiologia , Humanos , Microscopia Eletrônica de Varredura , Porosidade , Camada de Esfregaço/patologia , Dente Decíduo/efeitos dos fármacos , Dente Decíduo/microbiologiaRESUMO
The degree of success in the elimination of bacteria during cavity preparation and prior to the insertion of a restoration may increase the longevity of the restoration and therefore the success of the restorative procedure. The complete eradication of bacteria in a caries-affected tooth, during cavity preparation, is considered a difficult clinical task. In addition to weakening the tooth structure, attempts to excavate extensive carious tissue completely, by only mechanical procedures, may affect the vitality of the pulp. Therefore, disinfection of the cavity preparation after caries excavation can aid in the elimination of bacterial remnants that can be responsible for recurrent caries, postoperative sensitivity, and failure of the restoration. However, the effects of disinfectants on the restorative treatment have been a major concern for dental clinicians and researchers. This review aims to explore existing literature and provide information about different materials and techniques that have been used for disinfecting cavity preparations and their effects and effectiveness in operative dentistry and, therefore, helps dental practitioners with clinical decision to use cavity disinfectants during restorative procedures. Antimicrobial effectiveness and effects on the pulp and dental restorations, in addition to possible side effects, were all reviewed in this paper.
Assuntos
Preparo da Cavidade Dentária , Dentística Operatória , Desinfetantes/farmacologia , Procedimentos Cirúrgicos Bucais , Compostos de Benzalcônio/farmacologia , Clorexidina/análogos & derivados , Clorexidina/farmacologia , Polpa Dentária/efeitos dos fármacos , Compostos de Iodo/farmacologia , Lasers , Morinda , Oxidantes Fotoquímicos/farmacologia , Ozônio/farmacologia , Extratos Vegetais/farmacologia , Própole , Salvadoraceae , Hipoclorito de Sódio/farmacologiaRESUMO
OBJECTIVE: To evaluate the effect of ethanolic extracts of propolis (EEP) addition in different proportions to glass ionomer cement (GIC) on microleakage and microhardness of GIC. STUDY DESIGN: The cement was divided into four groups: one using the original composition and three with 10%, 25%, and 50% EEP added to the liquid and then manipulated. For microleakage assessment, sixty primary molars were randomly divided into four groups (n=15). Standard Class II cavities were prepared and then filled with EEP in different proportions added to GICs. Microleakage test was performed using a dye penetration method. The data were analyzed using one-way ANOVA and Mann-Whitney U tests (α = 0.05). Disc shaped specimens were prepared from the tested GIC to determine Vickers hardness (VHN). The data were analyzed using one-way ANOVA and post hoc Tukey test (α = 0.05). RESULTS: There were no statistically significant differences between the groups in terms of microleakage (p > 0.05). There were statistically significant differences between the VHN values of groups (p < 0.05). Increasing addition of EEP to GIC statistically significantly increased VHN value of GIC (p < 0.05). CONCLUSIONS: The addition of EEP to GIC increased the microhardness of the GIC and did not adversely affect the microleakage. Thus, it might be used during routine dental practice due to its antibacterial properties.
Assuntos
Infiltração Dentária/classificação , Etanol/química , Cimentos de Ionômeros de Vidro/química , Extratos Vegetais/química , Própole/química , Solventes/química , Corantes , Preparo da Cavidade Dentária/classificação , Esmalte Dentário/ultraestrutura , Polpa Dentária/ultraestrutura , Restauração Dentária Permanente/classificação , Dentina/ultraestrutura , Dureza , Humanos , Umidade , Teste de Materiais , Dente Molar/ultraestrutura , Distribuição Aleatória , Corantes de Rosanilina , Propriedades de Superfície , Temperatura , Fatores de Tempo , Dente Decíduo/ultraestruturaRESUMO
OBJECTIVE: To evaluate the effect of air-abrasion using three abrasive powders, on the susceptibility of sound enamel to an acid challenge. METHODS: 40 human enamel samples were flattened, polished and assigned to 4 experimental groups (n=10); a: alumina air-abrasion, b: sodium bicarbonate air-abrasion, c: bioactive glass (BAG) air-abrasion and d: no surface treatment (control). White light confocal profilometry was used to measure the step height enamel loss of the abraded area within each sample at three stages; after sample preparation (baseline), after air-abrasion and finally after exposing the samples to pH-cycling for 10 days. Data was analysed statistically using one-way ANOVA with Tukey's HSD post-hoc tests (p<0.05). Unique prismatic structures generated by abrasion and subsequent pH cycling were imaged using multiphoton excitation microscopy, exploiting strong autofluorescence properties of the enamel without labelling. Z-stacks of treated and equivalent control surfaces were used to generate non-destructively 3-dimensional surface profiles similar to those produced by scanning electron microscopy. RESULTS: There was no significant difference in the step height enamel loss after initial surface air-abrasion compared to the negative control group. However, a significant increase in the step height enamel loss was observed in the alumina air-abraded samples after pH-cycling compared to the negative control (p<0.05). Sodium bicarbonate as well as BAG air-abrasion exhibited similar enamel surface loss to that detected in the negative control group (p>0.05). Surface profile examination revealed a deposition effect across sodium bicarbonate and BAG-abraded groups. CONCLUSION: This study demonstrates the importance of powder selection when using air abrasion technology in clinical dentistry. Pre-treating the enamel surface with alumina air-abrasion significantly increased its susceptibility to acid challenge. Therefore, when using alumina air-abrasion clinically, clinicians must be aware that abrading sound enamel excessively renders that surface more susceptible to the effects of acid erosion. BAG and sodium bicarbonate powders were less invasive when compared to the alumina powder, supporting their use for controlled surface stain removal from enamel where indicated clinically.