A modular programmed biphasic dual-delivery system on 3D ceramic scaffolds for osteogenesis in vitro and in vivo.

Single-factor delivery is the most common characteristic of bone tissue engineering techniques. However, bone regeneration is a complex process requiring multiple factors and specialized release mechanisms. Therefore, the development of a dual-delivery system allowing for programmed release kinetics would be highly desirable. Improvement of the molarity and versatility of the delivery system has rarely been studied. Herein, we report the development of a novel, modular programmed biphasic dual-release system (SCB), carrying a BMP2 and an engineered collagen I-derived recognition motif (Stath-DGEA), with a self-remodification feature on hydroxyapatite (HA)-based materials. The SCB system was loaded onto an additive manufactured (AM) scaffold in order to evaluate its bifactor osteogenic potential and its biphasic release behavior. Further, the biomechanical properties of the scaffold were studied by using the fluid-structure interaction (FSI) method. Section fluorescent labeling revealed that the HA scaffold has a relatively higher density and efficiency. Additionally, the results of the release and inhibition experiment suggested that the SCB system could facilitate the sustained release of therapeutic levels of two factors during the initial stage of implantation, thereby exhibiting a rapid high-dose release pattern at a specific time point during the second stage. The FSI prediction model indicated that the scaffold provides an excellent biomimetic mechanical and fluid dynamic microenvironment to promote osteogenesis. Our results indicated that incorporation of BMP2 with Stath-DGEA in the biphasic SCB system could have a synergetic effect in promoting the adhesion, proliferation, and differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro, under staged stimulations. Further, in vivo studies in both ectopic and orthotopic rat models showed that the SCB system loaded onto an AM scaffold could enhance osteointegration and osteoinduction throughout the osteogenic process. Thus, the novel synthetic SCB system described herein used on an AM scaffold provides a biomimetic extracellular environment that enhances bone regeneration and is a promising multifunctional, dual-release platform.

A Bioactive Coating Enhances Bone Allografts in Rat Models of Bone Formation and Critical Defect Repair.

Bone allografts are inferior to autografts for the repair of critical-sized defects. Prior studies have suggested that bone morphogenetic protein-2 (BMP-2) can be combined with allografts to produce superior healing. We created a bioactive coating on bone allografts using polycondensed deoxyribose isobutyrate ester (PDIB) polymer to deliver BMP-2 ± the bisphosphonate zoledronic acid (ZA) and tested its ability to enhance the functional utility of allografts in preclinical Wistar rat models. One ex vivo and two in vivo proof-of-concept studies were performed. First, PDIB was shown to be able to coat bone grafts (BGs). Second, PDIB was used to coat structural allogenic corticocancellous BG with BMP-2 ± ZA ± hydroxyapatite (HA) microparticles and compared with PDIB-coated grafts in a rat muscle pouch model. Next, a rat critical defect model was performed with treatment groups including (i) empty defect, (ii) BG, (iii) collagen sponge + BMP-2, (iv) BG + PDIB/BMP-2, and (v) BG + PDIB/BMP-2/ZA. Key outcome measures included detection of fluorescent bone labels, microcomputed tomography (CT) quantification of bone, and radiographic healing. In the muscle pouch study, BMP-2 did not increase net bone volume measured by microCT, however, fluorescent labeling showed large amounts of new bone. Addition of ZA increased BV by sevenfold (p < 0.01). In the critical defect model, allografts were insufficient to promote reliable union, however, union was achieved in collagen/BMP-2 and all BG/BMP-2 groups. Statement of clinical significance: These data support the concept that PDIB is a viable delivery method for BMP-2 and ZA delivery to enhance the bone forming potential of allografts. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2278-2286, 2019.

Effects of BMP-2 dose and delivery of microvascular fragments on healing of bone defects with concomitant volumetric muscle loss.

Traumatic composite bone-muscle injuries, such as open fractures, often require multiple surgical interventions and still typically result in long-term disability. Clinically, a critical indicator of composite injury severity is vascular integrity; vascular damage alone is sufficient to assign an open fracture to the most severe category. Challenging bone injuries are often treated with bone morphogenetic protein 2 (BMP-2), an osteoinductive growth factor, delivered on collagen sponge. Previous studies in a composite defect model found that a minimally bridging dose in the segmental defect model was unable to overcome concomitant muscle damage, but the effect of BMP dose on composite injuries has not yet been studied. Here, we test the hypotheses that BMP-2-mediated functional regeneration of composite extremity injuries is dose dependent and can be further enhanced via co-delivery of adipose-derived microvascular fragments (MVF), which have been previously shown to increase tissue vascular volume. Although MVF did not improve healing outcomes, we observed a significant BMP-2 dose-dependent increase in regenerated bone volume and biomechanical properties. This is the first known report of an increased BMP-2 dose improving bone healing with concomitant muscle damage. While high dose BMP-2 delivery can induce heterotopic ossification (HO) and increased inflammation, the maximum 10 µg dose used in this study did not result in HO and was associated with a lower circulating inflammatory cytokine profile than the low dose (2.5 µg) group. These data support the potential benefits of an increased, though still moderate, BMP-2 dose for treatment of bone defects with concomitant muscle damage. Published 2019. This article is a U.S. Government work and is in the public domain in the USA. J Orthop Res.

Bone Tissue Engineering Strategies in Co-Delivery of Bone Morphogenetic Protein-2 and Biochemical Signaling Factors.

Administration of bone morphogenetic protein-2 (BMP-2), which is commercially approved by the food and drug administration to damaged bone sites has been investigated for the purpose of bone tissue regeneration. BMP-2 can promote osteoblastic differentiation of mesenchymal stem cells as well as regeneration of bone formation in early phase. This review highlights various factors such as vitamin D, dexamethasone, platelet-derived growth factor, placental growth factor, BMP-7, and NEL-like protein-1 that enhance and stimulate angiogenesis, cell differentiation, and bone regeneration. These biochemical signals and growth factors (GFs) accelerate bone repair and remodeling either synergistically or individually. Delivery systems and scaffolds are used for sustained release of these cargo molecules and support at damaged bone sites. Compared with direct administration of BMP-2, current studies have demonstrated that a combination of multiple GFs and/or therapeutic chemical factors with delivery platforms synergistically facilitates bone regeneration. Therefore, in the future, multiple combinations of various GFs, chemicals, and materials could provide patients and surgeons with non-invasive treatment options without secondary surgery and pain. To the end, this review summarizes the biological functions and synergistic effects of dual administration modalities involving BMP-2 as well as recent developments in bone tissue engineering applications.

Dual non-viral gene delivery from microparticles within 3D high-density stem cell constructs for enhanced bone tissue engineering.

High-density mesenchymal stem cell (MSC) aggregates can be guided to form bone-like tissue via endochondral ossification in vitro when culture media is supplemented with proteins, such as growth factors (GFs), to first guide the formation of a cartilage template, followed by culture with hypertrophic factors. Recent reports have recapitulated these results through the controlled spatiotemporal delivery of chondrogenic transforming growth factor-ß1 (TGF-ß1) and chondrogenic and osteogenic bone morphogenetic protein-2 (BMP-2) from microparticles embedded within human MSC aggregates to avoid diffusion limitations and the lengthy, costly in vitro culture necessary with repeat exogenous supplementation. However, since GFs have limited stability, localized gene delivery is a promising alternative to the use of proteins. Here, mineral-coated hydroxyapatite microparticles (MCM) capable of localized delivery of Lipofectamine-plasmid DNA (pDNA) nanocomplexes encoding for TGF-ß1 (pTGF-ß1) and BMP-2 (pBMP-2) were incorporated, alone or in combination, within MSC aggregates from three healthy porcine donors to induce sustained production of these transgenes. Three donor populations were investigated in this work due to the noted MSC donor-to-donor variability in differentiation capacity documented in the literature. Delivery of pBMP-2 within Donor 1 aggregates promoted chondrogenesis at week 2, followed by an enhanced osteogenic phenotype at week 4. Donor 2 and 3 aggregates did not promote robust glycosaminoglycan (GAG) production at week 2, but by week 4, Donor 2 aggregates with pTGF-ß1/pBMP-2 and Donor 3 aggregates with both unloaded MCM and pBMP-2 enhanced osteogenesis compared to controls. These results demonstrate the ability to promote osteogenesis in stem cell aggregates through controlled, non-viral gene delivery within the cell masses. These findings also indicate the need to screen donor MSC regenerative potential in response to gene transfer prior to clinical application. Taken together, this work demonstrates a promising gene therapy approach to control stem cell fate in biomimetic 3D condensations for treatment of bone defects.

Targeting intracellular Staphylococcus aureus to lower recurrence of orthopaedic infection.

Staphylococcus aureus is often found in orthopaedic infections and may be protected from commonly prescribed antibiotics by forming biofilms or growing intracellularly within osteoblasts. To investigate the effect of non-antibiotic compounds in conjunction with antibiotics to clear intracellular and biofilm forming S. aureus causing osteomyelitis. SAOS-2 osteoblast-like cell lines were infected with S. aureus BB1279. Antibiotics (vancomycin, VAN; and dicloxacillin, DICLOX), bacterial efflux pump inhibitors (piperine, PIP; carbonyl cyanide m-chlorophenyl hydrazone, CCCP), and bone morphogenetic protein (BMP-2) were evaluated individually and in combination to kill intracellular bacteria. We present direct evidence that after gentamicin killed extracellular planktonic bacteria and antibiotics had been stopped, seeding from the infected osteoblasts grew as biofilms. VAN was ineffective in treating the intracellular bacteria even at 10× MIC; however in presence of PIP or CCCP the intracellular S. aureus was significantly reduced. Bacterial efflux pump inhibitors (PIP and CCCP) were effective in enhancing permeability of antibiotics within the osteoblasts and facilitated killing of intracellular S. aureus. Confocal laser scanning microscopy (CLSM) showed increased uptake of propidium iodide within osteoblasts in presence of PIP and CCCP. BMP-2 had no effect on growth of S. aureus either alone or in combination with antibiotics. Combined application of antibiotics and natural agents could help in the treatment of osteoblast infected intracellular bacteria and biofilms associated with osteomyelitis. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1086-1092, 2018.

Evaluation of synergistic osteogenesis between icariin and BMP2 through a micro/meso hierarchical porous delivery system.

BMP2 is well known as an outstanding growth factor for inducing new bone formation. However, improvements are still required to use BMP2 effectively and expand its clinical application due to the potential side effects at high doses. In this study, icariin (IC), a type of traditional Chinese medicine, was originally proposed to be a cooperative factor for BMP2. An alkaline phosphatase (ALP) activity assay showed that IC promoted BMP2 osteogenesis in a concentration-dependent manner with significant enhancement at 38.4 µM versus that for BMP2 at 0.8 µg/mL. Furthermore, we developed a composite hierarchical porous scaffold (SF/SBA15; composed of micropores of silk fibroin [SF] scaffold and mesopores of SBA15) for the controlled delivery of BMP2 and IC. This composite scaffold was investigated by a series of physical characterizations and displayed good in vitro cell biocompatibility. In addition, the composite scaffold also showed the degradation rate of 12% dry weight loss and a slight change in the microstructures within 10 days. Moreover, BMP2 and IC were loaded into the SF and SBA15 structures, respectively, of the SF/SBA15 scaffold. This protein/drug loading system (SFBMP2/SBA15IC) provided delivery of BMP2 with an initial burst release of 60.9%±0.9% in the first 24 hours and a gradual release over the subsequent 6 days to 97.9%±0.8%, whereas IC exhibited a burst release of 64.2%±0.7% in the first 24 hours, followed by a sustained release to 92.4%±0.8% over 10 days. With the prolonged local retention and interaction duration of BMP2 and IC, the SFBMP2/SBA15IC scaffold provided better osteogenic differentiation than other groups with different loading modes of BMP2 or IC, as determined by ALP staining and quantitation and Alizarin red staining. Finally, the results of quantitative real-time polymerase chain reaction analysis indicated that the SFBMP2/SBA15IC scaffold induced a significantly higher increase in the RUNX2, ALP, COL I, and OCN expression levels of cocultured bone marrow mesenchymal stem cells than other payload composite scaffolds. This study suggests that a micro/meso hierarchical porous delivery system of BMP2 and IC ensures osteogenic synergy and demonstrates promise for bone tissue engineering.

Low-dose BMP-2 and MSC dual delivery onto coral scaffold for critical-size bone defect regeneration in sheep.

Tissue-engineered constructs (TECs) combining resorbable calcium-based scaffolds and mesenchymal stem cells (MSCs) have the capability to regenerate large bone defects. Inconsistent results have, however, been observed, with a lack of osteoinductivity as a possible cause of failure. This study aimed to evaluate the impact of the addition of low-dose bone morphogenetic protein-2 (BMP-2) to MSC-coral-TECs on the healing of clinically relevant segmental bone defects in sheep. Coral granules were either seeded with autologous MSCs (bone marrow-derived) or loaded with BMP-2. A 25-mm-long metatarsal bone defect was created and stabilized with a plate in 18 sheep. Defects were filled with one of the following TECs: (i) BMP (n = 5); (ii) MSC (n = 7); or (iii) MSC-BMP (n = 6). Radiographic follow-up was performed until animal sacrifice at 4 months. Bone formation and scaffold resorption were assessed by micro-CT and histological analysis. Bone union with nearly complete scaffold resorption was observed in 1/5, 2/7, and 3/6 animals, when BMP-, MSC-, and MSC-BMP-TECs were implanted, respectively. The amount of newly formed bone was not statistically different between groups: 1074 mm3 [970-2478 mm3 ], 1155 mm3 [970-2595 mm3 ], and 2343 mm3 [931-3276 mm3 ] for BMP-, MSC-, and MSC-BMP-TECs, respectively. Increased scaffold resorption rate using BMP-TECs was the only potential side effect observed. In conclusion, although the dual delivery of MSCs and BMP-2 onto a coral scaffold further increased bone formation and bone union when compared to single treatment, results were non-significant. Only 50% of the defects healed, demonstrating the need for further refinement of this strategy before clinical use. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2637-2645, 2017.

Dual growth factor delivery from biofunctionalized allografts: Sequential VEGF and BMP-2 release to stimulate allograft remodeling.

Autografts have been shown to stimulate osteogenesis, osteoclastogenesis, and angiogenesis, and subsequent rapid graft incorporation. Large structural allografts, however, suffer from limited new bone formation and remodeling, both of which are directly associated with clinical failure due to non-unions, late graft fractures, and infections, making it a priority to improve large structural allograft healing. We have previously shown the osteogenic ability of a polymer-coated allograft that delivers bone morphogenetic protein-2 both in vitro and in vivo through both burst release and sustained release kinetics. In this study, we have demonstrated largely sequential delivery of bone morphogenetic protein-2 and vascular endothelial growth factor from the same coated allograft. Release data showed that loading both growth factors onto a polymeric coating with two different techniques resulted in short-term (95% release within 2 weeks) and long-term (95% release within 5 weeks) delivery kinetics. We have also demonstrated how released VEGF, traditionally associated with angiogenesis, can also provide a stimulus for allograft remodeling via resorption. Bone marrow derived mononuclear cells were co-cultured with VEGF released from the coated allograft and showed a statistically significant (p < 0.05) and dose dependent increase in the number of tartrate-resistant acid phosphatase-positive multinucleated osteoclasts. Functionality of these osteoclasts was assessed quantitatively and qualitatively by evaluating resorption pit area from both osteo-assay plates and harvested bone. Data indicated a statistically significant higher resorption area from the cells exposed to VEGF released from the allografts over controls (p < 0.05). These results indicate that by using different loading protocols temporal control can be achieved when delivering multiple growth factors from a polymer-coated allograft. Further, released VEGF can also stimulate osteoclastogenesis that may enhance allograft incorporation, and thus mitigate long-term clinical complications. © 2017 Orthopedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1086-1095, 2017.

Interaction between living bone particles and rhBMP-2 in large segmental defect healing in the rat femur.

Orthopedic surgeons sometimes combine recombinant, human BMP-2 with autograft bone when dealing with problematic osseous fractures. Although some case reports indicate success with this off-label strategy, there have been no randomized controlled trials. Moreover, a literature search revealed only one pre-clinical study and this was in a cranial defect model. The present project examined the consequences of combining BMP-2 with particles of living bone in a rat femoral defect model. Human bone particles were recovered with a reamer-irrigator-aspirator (RIA). To allow acceptance of the xenograft as surrogate autograft, rats were administered an immunosuppressive cocktail that does not interfere with bone healing. Implantation of 200 µg living bone particles generated a small amount of new bone and defects did not heal. Graded amounts of BMP-2 that alone provoked no healing (1.1 µg), borderline healing (5.5 µg), or full healing (11 µg) were added to this amount of bone particles. Addition of BMP-2 (1.1 µg) increased osteogenesis, and produced bridging in 2 of 7 defects. The combination of BMP-2 (5.5 µg) and bone particles made healing more reliable and advanced the maturation of the regenerate. Bone formation with BMP-2 (11 µg) and bone particles showed improved maturation. Thus, the combination of autograft and BMP-2 may be helpful clinically under conditions where the healing response is suboptimal. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:2137-2145, 2016. Clinical significance These data support the clinical use of recombinant, human BMP-2 with autograft bone when treating large segmental osseous defects. The combination leads to greater bone formation and accelerates the maturation of the regenerate.

BMP-2 delivered via sucrose acetate isobutyrate (SAIB) improves bone repair in a rat open fracture model.

Human bone morphogenetic proteins (BMPs) are an alternative to bone graft for the treatment of high-energy open fractures. The standard delivery system for BMP-2 is a porous collagen sponge, but we have previously found that the biocompatible, high viscosity carrier, Sucrose acetate isobutyrate (SAIB) is an effective and potentially less invasive alternative. The efficacy of SAIB as a BMP-2 delivery system was examined in an open fracture model featuring a femoral osteotomy with periosteal stripping in 9-week-old male Sprague Dawley rats. SAIB containing BMP-2 (SAIB/BMP-2) was delivered into the fracture site during surgery and an additional group was further co-treated with zoledronic acid and hydroxyapatite nanoparticles (SAIB/BMP-2/HA/ZA). These were compared to untreated fractures and SAIB carrier alone (negative controls), and BMP-2 loaded collagen sponge (positive control). The rate of radiographic union and the biomechanical properties of the healed fractures were compared after 6-week. Untreated and SAIB-treated fractures showed poor repair, with 53% and 64%, respectively, not bridged at 6 week. In contrast, collagen/BMP-2, SAIB/BMP-2, and SAIB/BMP-2/HA/ZA showed significantly increased union (100%, 100%, and 94%, respectively, p < 0.05). Four-point bend testing revealed that collagen/BMP-2 and SAIB/BMP-2/HA/ZA restored the strength of fractured femora to that of intact femora by 6 week, whereas untreated and SAIB remained less than intact controls by 60% and 67%, respectively (p < 0.05). Overall, the SAIB/BMP-2/HA/ZA formulation was comparable to BMP-2 infused collagen sponge in terms of promoting open fractures repair, but with the additional potential for less invasive delivery. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1168-1176, 2016.

Tyrosine-derived polycarbonate scaffolds for bone regeneration in a rabbit radius critical-size defect model.

The aim of the study was to determine bone regeneration in a rabbit radius critical-size defect (CSD) model using a specific polymer composition (E1001(1k)) from a library of tyrosine-derived polycarbonate scaffolds coated with a calcium phosphate (CP) formulation (E1001(1k) + CP) supplemented with recombinant human bone morphogenetic protein-2 (rhBMP-2). Specific doses of rhBMP-2 (0, 17, and 35 µg/scaffold) were used. E1001(1k) + CP scaffolds were implanted in unilateral segmental defects (15 mm length) in the radial diaphyses of New Zealand White rabbits. At 4 and 8 weeks post-implantation, bone regeneration was determined using micro-computed tomography (µCT), histology, and histomorphometry. The quantitative outcome data suggest that E1001(1k) + CP scaffolds with rhBMP-2 were biocompatible and promoted bone regeneration in segmental bone defects. Histological examination of the implant sites showed that scaffolds made of E1001(1k) + CP did not elicit adverse cellular or tissue responses throughout test periods up to 8 weeks. Noteworthy is that the incorporation of a very small amount of rhBMP-2 into the scaffolds (as low as 17 µg/defect site) promoted significant bone regeneration compared to scaffolds consisting of E1001(1k) + CP alone. This finding indicates that E1001(1k) + CP may be an effective platform for bone regeneration in a critical size rabbit radius segmental defect model, requiring only a minimal dose of rhBMP-2.

A novel library screen identifies immunosuppressors that promote osteoblast differentiation.

Bone homeostasis can be compromised by an increase in osteoclast-mediated resorption and/or a decrease in osteoblast-mediated bone deposition. While many efforts have focused on treating osteoclast resorption, there has been less emphasis on identifying strategies for promoting osteoblast function. Herein, we describe a high-throughput screening assay to select for small molecules that augment bone morphogenetic protein-2 (BMP-2)-mediated osteoblast lineage commitment. After an initial screen of 5405 compounds; consisting of FDA-approved drugs, known bioactives, and compounds with novel chemical makeup, we identified 45 small molecules that promoted osteoblast commitment. Of the 45 candidates, there was a broad array of classes that included nine retinoid analogs/derivatives and four immunosuppressants, notably rapamycin and FK-506, which were chosen for further study. Treatment of osteoblast precursor cells with rapamycin or FK-506, either alone, or synergistically with BMP-2, increased levels of phospho-Smad 1/5/8 protein and transcription of Runx-2, Osx and Smad-7, consistent with a role in promoting osteoblast differentiation. Only FK-506 was able to enhance osteocalcin transcripts and Alizarin Red staining, both late markers for differentiation. When osteoblast differentiation was suppressed with exogenous TGF-ß1 treatment, rapamycin (but not FK-506) was able to rescue expression of differentiation markers, indicating distinct but overlapping activity of these compounds. Collectively, these data add to an understanding of pathways engaged in osteoblastogenesis, support a role for non-redundant immunosuppressant signaling, and provide a novel approach for the discovery of potentially therapeutic compounds that affect bone remodeling.

The calvarial injection assay.

This chapter describes the calvarial injection method, whereby the effect of a substance on bone is tested by subcutaneous injection over the calvarium of a mouse. This assay allows testing of the effect of substances on both bone resorption and bone formation in a relatively simple in vivo model. The analysis is carried out by histological means, usually in glycolmethacrylate-embedded tissue, allowing for histochemical analysis and for a variety of different histological staining methods which are also described in detail.

Effects of the combination of low-level laser irradiation and recombinant human bone morphogenetic protein-2 in bone repair.

Low-level laser irradiation (LLLI) and recombinant human bone morphogenetic protein type 2 (rhBMP-2) have been used to stimulate bone formation. LLLI stimulates proliferation of osteoblast precursor cells and cell differentiation and rhBMP-2 recruits osteoprogenitor cells to the bone healing area. This in vivo study evaluated the effects of LLLI and rhBMP-2 on the bone healing process in rats. Critical bone defects were created in the parietal bone in 42 animals, and the animals were divided into six treatment groups: (1) laser, (2) 7 µg of rhBMP-2, (3) laser and 7 µg of rhBMP-2, (4) 7 µg of rhBMP-2/monoolein gel, (5) laser and 7 µg rhBMP-2/monoolein gel, and (6) critical bone defect controls. A gallium-aluminum-arsenide diode laser was used (wavelength 780 nm, output power 60 mW, beam area 0.04 cm(2), irradiation time 80 s, energy density 120 J/cm(2), irradiance 1.5 W/cm(2)). After 15 days, the calvarial tissues were removed for histomorphometric analysis. Group 3 defects showed higher amounts of newly formed bone (37.89%) than the defects of all the other groups (P < 0.05). The amounts of new bone in defects of groups 1 and 4 were not significantly different from each other (24.00% and 24.75%, respectively), but were significantly different from the amounts in the other groups (P < 0.05). The amounts of new bone in the defects of groups 2 and 5 were not significantly different from each other (31.42% and 31.96%, respectively), but were significantly different from the amounts in the other groups (P < 0.05). Group 6 defects had 14.10% new bone formation, and this was significantly different from the amounts in the other groups (P < 0.05). It can be concluded that LLLI administered during surgery effectively accelerated healing of critical bone defects filled with pure rhBMP-2, achieving a better result than LLLI alone or the use of rhBMP-2 alone.

Administration of BMP2/7 in utero partially reverses Rubinstein-Taybi syndrome-like skeletal defects induced by Pdk1 or Cbp mutations in mice.

Mutations in the coactivator CREB-binding protein (CBP) are a major cause of the human skeletal dysplasia Rubinstein-Taybi syndrome (RTS); however, the mechanism by which these mutations affect skeletal mineralization and patterning is unknown. Here, we report the identification of 3-phosphoinositide-dependent kinase 1 (PDK1) as a key regulator of CBP activity and demonstrate that its functions map to both osteoprogenitor cells and mature osteoblasts. In osteoblasts, PDK1 activated the CREB/CBP complex, which in turn controlled runt-related transcription factor 2 (RUNX2) activation and expression of bone morphogenetic protein 2 (BMP2). These pathways also operated in vivo, as evidenced by recapitulation of RTS spectrum phenotypes with osteoblast-specific Pdk1 deletion in mice (Pdk1osx mice) and by the genetic interactions observed in mice heterozygous for both osteoblast-specific Pdk1 deletion and either Runx2 or Creb deletion. Finally, treatment of Pdk1osx and Cbp+/- embryos with BMPs in utero partially reversed their skeletal anomalies at birth. These findings illustrate the in vivo function of the PDK1-AKT-CREB/CBP pathway in bone formation and provide proof of principle for in utero growth factor supplementation as a potential therapy for skeletal dysplasias.

Influence of low-level laser associated with osteogenic proteins recombinant human BMP-2 and Hevea brasiliensis on bone repair in Wistar rats.

This study analyzed the newly formed bone tissue after application of recombinant human BMP-2 (rhBMP-2) and P-1 (extracted from Hevea brasiliensis) proteins, 2 weeks after the creation of a critical bone defect in male Wistar rats treated or not with a low-intensity laser (GaAlAs 780 nm, 60 mW of power, and energy density dose of 30 J/cm(2)). The animals were divided into two major groups: (1) bone defect plus low-intensity laser treatment and (2) bone defect without laser irradiation. The following subgroups were also analyzed: (a) 5 µg of pure rhBMP-2; (b) 5 µg of pure P-1 fraction; (c) 5 µg of rhBMP-2/monoolein gel; (d) 5 µg of P-1 fraction/monoolein gel; (e) pure monoolein gel. Comparisons of the groups receiving laser treatment with those that did not receive laser irradiation show differences in the areas of new bone tissue. The group treated with 5 µg of rhBMP-2 and laser irradiation was not significantly different (P >0.05) than the nonirradiated group that received the same treatment. The irradiated, rhBMP-2/monoolein gel treatment group showed a lower area of bone formation than the nonirradiated, rhBMP-2/gel monoolein treatment group (P < 0.001). The area of new bone tissue in the other nonirradiated and irradiated groups was not significantly different (P > 0.05). Furthermore, the group that received the 5 µg of rhBMP-2 application showed the greatest bone formation. We conclude that the laser treatment did not interfere with the area of new bone tissue growth and that the greatest stimulus for bone formation involved application of the rhBMP-2 protein.

Comparison of bone morphogenetic protein-2 and osteoactivin for mesenchymal cell differentiation: effects of bolus and continuous administration.

Current osteoinductive protein therapy utilizes bolus administration of large doses of bone morphogenetic proteins (BMPs), which is costly, and may not replicate normal bone healing. The limited in vivo biologic activity of BMPs requires the investigation of growth factors that may enhance this activity. In this study, we utilized the C3H10T1/2 murine mesenchymal stem cell line to test the hypotheses that osteoactivin (OA) has comparable osteoinductive effects to bone morphogenetic protein-2 (BMP-2), and that sustained administration of either growth factor would result in increased osteoblastic differentiation as compared to bolus administration. Sustained release biodegradable hydrogels were designed, and C3H10T1/2 cells were grown on hydrogels loaded with BMP-2 or OA. Controls were grown on unloaded hydrogels, and positive controls were exposed to bolus growth factor administration. Cells were harvested at several time points to assess osteoblastic differentiation. Alkaline phosphatase (ALP) staining and activity, and gene expression of ALP and osteocalcin were assessed. Treatment with OA or BMP-2 resulted in comparable effects on osteoblastic marker expression. However, cells grown on hydrogels demonstrated osteoblastic differentiation that was not as robust as cells treated with bolus administration. This study shows that OA has comparable effects to BMP-2 on osteoblastic differentiation using both bolus administration and continuous release, and that bolus administration of OA has a more profound effect than administration using hydrogels for sustained release. This study will lead to a better understanding of appropriate delivery methods of osteogenic growth factors like OA for repair of fractures and segmental bone defects.

The kinetic and biological activity of different loaded rhBMP-2 calcium phosphate cement implants in rats.

The healing of large bone defects can be improved by osteogenic bone graft substitutes, due to growth factor inclusion. A sustained release of these growth factors provides more efficient bioactivity when compared with burst release and might reduce the dose required for bone regeneration, which is desirable for socioeconomical and safety reasons. In this study, we compared different rhBMP-2 loadings in a sustained release system of CaP cement and PLGA-microparticles and were able to couple kinetic to biological activity data. Fifty-two rats received a critical-size cranial defect, which was left open or filled with the cement composites. The implants consisted of plain, high, and five-fold lower dose rhBMP-2 groups. Implantation time was 4 and 12 weeks. Longitudinal in vivo release was monitored by scintigraphic imaging of (131)I-labeled rhBMP-2. Quantitative analysis of the scintigraphic images revealed a sustained release of (131)I-rhBMP-2 for both doses, with different release profiles between the two loadings. However, around 70% of the initial dose was retained in both implant formulations. Although low amounts of rhBMP-2 were released (2.4 +/- 0.8 mug in 5 weeks), histology showed defect bridging in the high-dose implants. Release out of the low-dose implants was not sufficient to enhance bone formation. Implant degradation was limited in all formulations, but was mainly seen in the high-dose group. Low amounts of sustained released rhBMP-2 were sufficient to bridge critically sized defects. A substantial amount of rhBMP-2 was retained in the implants because of the slow release rate and the limited degradation.