Multi-Step Enzymatic Production and Purification of 2-Keto-3-Deoxy-Galactonate from Red-Macroalgae-Derived Agarose.

2-keto-3-deoxy sugar acids, which have potential as precursors in medicinal compound production, have gained attention in various fields. Among these acids, 2-keto-3-deoxy-l-galactonate (KDGal) has been biologically produced from D-galacturonate originating from plant-derived pectin. KDGal is also found in the catabolic pathway of 3,6-anhydro-l-galactose (AHG), the main component of red-algae-derived agarose. AHG is converted to 3,6-anhydrogalactonate by AHG dehydrogenase and subsequently isomerized to KDGal by 3,6-anhydrogalactonate cycloisomerase. Therefore, we used the above-described pathway to produce KDGal from agarose. Agarose was depolymerized to AHG and to agarotriose (AgaDP3) and agaropentaose (AgaDP5), both of which have significantly higher molecular weights than AHG. When only AHG was converted to KDGal, AgaDP3 and AgaDP5 remained unreacted. Finally, KDGal was effectively purified from the enzymatic products by size-exclusion chromatography based on the differences in molecular weights. These results show that KDGal can be enzymatically produced and purified from agarose for use as a precursor to high-value products.

Selenium-agarose hybrid hydrogel as a recyclable natural substrate for selenium-enriched cultivation of mung bean sprouts.

Selenium (Se) is an essential trace element for human beings and animals. Traditional plant Se enrichment technology suffers from selenium pollution. Herein, environmentally friendly Se-agarose (Se-Agar) hybrid hydrogels are prepared by simply mixing agar with different Se species including selenocarrageenan (SeCA), selenite and Se yeast under heating and stirring for 0.5 h without any other reagent. Such Se-Agar hybrid hydrogels with excellent biocompatibility were used as natural substrates for the cultivation of Se-enriched mung bean sprouts. Compared with Se yeast, SeCA and selenite show a better Se enrichment effect on mung bean sprouts. Furthermore, the growth indices including plant weight and plant height of mung bean sprouts were investigated with different concentrations and sources of Se. Notably, the Se-Agar hybrid hydrogels could be easily regenerated and reused for multiple cycles. The results indicated that Se-Agar hybrid hydrogels as recyclable natural substrates offer a simple, sustainable and affordable strategy for plant Se enrichment.

Smart MXene/agarose hydrogel with photothermal property for controlled drug release.

Smart hydrogels responsive to minimally invasive near-infrared (NIR) light have great potential in localized drug delivery for cancer treatment, but they still show some limitations such as low photothermal conversion, poor photothermal stability, and improper temperature range in biomedical applications. In this paper, the two-dimensional MXene nanosheets with high photothermal conversion efficiency as well as photothermal stability was firstly prepared, then the MXene nanosheets and the therapeutic drug were embedded in the low-melting-point agarose hydrogel network to fabricate the drug-loaded MXene/agarose hydrogel (MXene@Hydrogel). With the addition of low concentration of MXene (20 ppm), the MXene@Hydrogel could quickly rise to 60 °C under NIR irradiation and melt to release the encapsulated drugs. Importantly, the drug on/off release and the kinetics could be easily controlled with varied agarose concentration, MXene concentration, light intensity, and exposure time. In addition, the drug doxorubicin retained the anticancer activity after released from the MXene@Hydrogel network under NIR irradiation. With the excellent biocompatibility, the newly fabricated NIR-responsive MXene@Hydrogel offers a novel way for the development of smart hydrogel-based drug delivery system for localized cancer treatment.

Agarose oligosaccharide- silver nanoparticle- antimicrobial peptide- composite for wound dressing.

Marine polysaccharides or oligosaccharides have potential to promote wound healing due to their biocompatibility and physicochemical properties. However, microbial infection delays wound healing process, and novel antimicrobial wound dressings are urgently needed. Here, agarose oligosaccharides (AGO) obtained from marine red algae were used as a reducing and stabilizer for green synthesis of silver nanoparticles (AgNPs), and further successfully connected with odorranain A (OA), one of antimicrobial peptides (AMPs), to obtain a novel composite nanomaterial (AGO-AgNPs-OA). Transmission electron microscopy (TEM) and Malvern particle size analyzer showed that AGO-AgNPs-OA was spherical or elliptic with average size of about 100 nm. Circular dichroism (CD) spectroscopy showed that AGO-AgNPs stabilized the α-helical structure of OA. AGO-AgNPs-OA showed stronger anti-bacterial activities than AGO-AgNPs, and had good biocompatibility and significant promoting effect on wound healing. Our data suggest that AMPs conjugated marine oligosaccharides and AgNPs may be effective and safe antibacterial materials for wound therapy.

Recent trends in natural polysaccharide based bioinks for multiscale 3D printing in tissue regeneration: A review.

Biofabrication by three-dimensional (3D) printing has been an attractive technology in harnessing the possibility to print anatomical shaped native tissues with controlled architecture and resolution. 3D printing offers the possibility to reproduce complex microarchitecture of native tissues by printing live cells in a layer by layer deposition to provide a biomimetic structural environment for tissue formation and host tissue integration. Plant based biomaterials derived from green and sustainable sources have represented to emulate native physicochemical and biological cues in order to direct specific cellular response and formation of new tissues through biomolecular recognition patterns. This comprehensive review aims to analyze and identify the most commonly used plant based bioinks for 3D printing applications. An overview on the role of different plant based biomaterial of terrestrial origin (Starch, Nanocellulose and Pectin) and marine origin (Ulvan, Alginate, Fucoidan, Agarose and Carrageenan) used for 3D printing applications are discussed elaborately. Furthermore, this review will also emphasis in the functional aspects of different 3D printers, appropriate printing material, merits and demerits of numerous plant based bioinks in developing 3D printed tissue-like constructs. Additionally, the underlying potential benefits, limitations and future perspectives of plant based bioinks for tissue engineering (TE) applications are also discussed.

Agarose/κ-carrageenan-based hydrogel film enriched with natural plant extracts for the treatment of cutaneous wounds.

Hydrogels for complex and chronic wound dressings must be conformable, absorb and retain wound exudates and maintain hydration. They can incorporate and release bioactive molecules that can accelerate the healing process. Wound dressings have to be in contact with the wound and epidermis, even for long periods, without causing adverse effects. Hydrogel dressing formulations based on biopolymers derived from terrestrial or marine flora can be relatively inexpensive and well tolerated. In the present article hydrogel films composed by agarose (1.0 wt%), κ-carrageenan at three different concentrations (0.5, 1.0 and 1.5 wt%) and glycerol (3.0 wt%) were prepared without recourse to crosslinking agents, and characterized for their mechanical properties, morphology, swelling and erosion behavior. The films resulted highly elastic and able to absorb and retain large amounts of fluids without losing their integrity. One of the films was loaded with the aqueous extract from Cryphaea heteromalla (Hedw.) D. Mohr for its antioxidant properties. Absence of cytotoxicity and ability to reduce the oxidative stress were demonstrated on NIH-3T3 fibroblast cell cultures. These results encourage further biological evaluations to assess their impact on the healing process.

Purification of GNA-Related Lectins from Natural Sources.

The Galanthus nivalis lectin, abbreviated as GNA, is the model protein for a large group of mannose-binding lectins. Here, we describe the purification of GNA starting from dry bulbs. Using a combination of ion exchange chromatography and affinity chromatography on mannose-Sepharose, a highly pure preparation of GNA can be obtained.

Polysaccharide-based recoverable double-network hydrogel with high strength and self-healing properties.

Polysaccharide-based hydrogels (PSBHs) have received significant attention for numerous bio-applications due to their biocompatibility and non-immunogenic performance. However, the construction of PSBH with superior mechanical properties by a simple method is rarely adequately researched. This study focuses on the construction of a novel PSBH with superior mechanical and recoverable properties by integrating the synergistic and complementary interactions of covalent bond-associated oxidized sodium alginate (SA-CHO) gel and hydrogen bond-associated agarose (Aga) gel. With the synergy and complementarity of the SA-CHO and Aga networks, the hydrogel exhibited 17 and 15 times (20 and 9 times) greater compressive stress and modulus, respectively, compared with the SA-CHO gel (Aga gel). The hydrogel also displayed excellent fatigue resistance, recurrent shapeability, acid resistance and recovery ability, as well as self-healing ability. This study provides a unique perspective for enhancing the mechanical properties of PSBH through the synergy and complementarity of different kinds of polysaccharides without sacrificing the functionality of the PSBH.

Rapid and sensitive identification of ricin in environmental samples based on lactamyl agarose beads using LC-MS/MS (MRM).

Ricin, a plant-derived toxin extracted from the seeds of Ricinus communis (castor bean plant), is one of the most toxic proteins known. Ricin's high toxicity, widespread availability, and ease of its extraction make it a potential agent for bioterrorist attacks. Most ricin detection methods are based on immunoassays. These methods may suffer from low efficiency in matrices containing interfering substances, or from false positive results due to antibody cross reactivity, with highly homologous proteins. In this study, we have developed a simple, rapid, sensitive, and selective mass spectrometry assay, for the identification of ricin in complex environmental samples. This assay involves three main stages: (a) Ricin affinity capture by commercial lactamyl-agarose (LA) beads. (b) Tryptic digestion. (c) LC-MS/MS (MRM) analysis of tryptic fragments. The assay was validated using 60 diverse environmental samples such as soil, asphalt, and vegetation, taken from various geographic regions. The assay's selectivity was established in the presence of high concentrations of competing lectin interferences. Based on our findings, we have defined strict criteria for unambiguous identification of ricin. Our novel method, which combines affinity capture beads followed by MRM-based analysis, enabled the identification of 1 ppb ricin spiked into complex environmental matrices. This methodology has the potential to be extended for the identification of ricin in body fluids from individuals exposed (deliberately or accidentally) to the toxin, contaminated food or for the detection of the entire family of RIP-II toxins, by applying multiplex format.

Purification and Product Characterization of Lipoxygenase from Opium Poppy Cultures (Papaver somniferum L.).

Opium poppy (Papaver somniferum L.) is an ancient medicinal plant producing pharmaceutically important benzylisoquinoline alkaloids. In the present work we focused on the study of enzyme lipoxygenase (LOX, EC 1.13.11.12) from opium poppy cultures. LOX is involved in lipid peroxidation and lipoxygenase oxidation products of polyunsaturated fatty acids have a significant role in regulation of growth, development and plant defense responses to biotic or abiotic stress. The purpose of this study was to isolate and characterize LOX enzyme from opium poppy callus cultures. LOX was purified by ammonium sulfate precipitation and then followed by hydrophobic chromatography using Phenyl-Sepharose CL-4B and hydroxyapatite chromatography using HA Ultrogel sorbent. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis and immunoblotting revealed that LOX from opium poppy cultures was a single monomeric protein showing the relative molecular weight of 83 kDa. To investigate the positional specificity of the LOX reaction, purified LOX was incubated with linoleic acid and the products were analyzed by high-performance liquid chromatography in two steps, firstly with reverse phase (120-5 Nucleosil C18 column) and secondly with normal phase (Zorbax Rx-SIL column). LOX converted linoleic acid primarily to 13-hydroperoxy-(9Z,11E)-octadecadienoic acids (78%) and to a lesser extent 9-hydroperoxy-(10E,12Z)-octadecadienoic acids (22%). Characterization of LOX from opium poppy cultures provided valuable information in understanding LOX involvement in regulation of signaling pathways leading to biosynthesis of secondary metabolites with significant biological activity.

Quantitative analysis of the phase volume of agarose-canola oil gels in comparison to blending law predictions using 3D imaging based on confocal laser scanning microscopy.

Studying the phase behaviour of composite gels facilitates understanding of their structural and textural properties at low and intermediate levels of solids. In this work, the phase behaviour of a model system of agarose including various concentrations of canola oil was studied. This was pursued using a variety of techniques including SEM, FTIR, microDSC and dynamic oscillation in-shear. The structural studies recorded strong, continuous agarose networks supporting soft, discontinuous canola oil inclusions, with increasing levels of canola oil strengthening the composite system. A novel confocal laser scanning microscopy (CLSM) method for quantitative in situ examination of the oil phase volume was developed using three-dimensional (3D) imaging and image analysis software - FIJI and Imaris. Microscopic observations were assessed in relation to theoretical predictions from rheology-based blending-law analysis. Quantitative outcomes from the combined 3D imaging and image analysis are in close agreement with the volume predictions for the oil phase obtained from the isostrain blending law indicating the suitability of this approach in quantifying the phase behaviour of composite materials. The results of this work indicate that the developed microscopic method shows promise and could be used in the determination of phase volume in more complex and industrially relevant systems.

Activated Cross-linked Agarose for the Rapid Development of Affinity Chromatography Resins - Antibody Capture as a Case Study.

The purification of monoclonal antibodies (mAbs) is commonly achieved by Protein A affinity chromatography, which can account for up to 25% of the overall process costs. Alternative, cost-effective capture steps are therefore valuable for industrial-scale manufacturing, where large quantities of a single mAb are produced. Here we present a method for the immobilization of a DsRed-based epitope ligand to a cross-linked agarose resin allowing the selective capture of the HIV-neutralizing antibody 2F5 from crude plant extracts without using Protein A. The linear epitope ELDKWA was first genetically fused to the fluorescent protein DsRed and the fusion protein was expressed in transgenic tobacco (Nicotiana tabacum) plants before purification by immobilized metal-ion affinity chromatography. Furthermore, a method based on activated cross-linked agarose was optimized for high ligand density, efficient coupling and low costs. The pH and buffer composition and the soluble ligand concentration were the most important parameters during the coupling procedure, which was improved using a design-of-experiments approach. The resulting affinity resin was tested for its ability to selectively bind the target mAb in a crude plant extract and the elution buffer was optimized for high mAb recovery, product activity and affinity resin stability. The method can easily be adapted to other antibodies with linear epitopes. The new resins allow gentler elution conditions than Protein A and could also reduce the costs of an initial capture step for mAb production.

Optimized immobilization of polygalacturonase from Aspergillus niger following different protocols: Improved stability and activity under drastic conditions.

Polygalacturonase (PG) from Aspergillus niger was immobilized using glyoxyl, vinylsulfone or glutaraldehyde-activated supports. The use of supports pre-activated with glutaraldehyde presented the best results. The immobilization of PG on glutaraldehyde-supports was studied under different conditions: at pH 5 for 24 h; at pH 5, 6.5 or 8 for 3 h and then incubated at pH 8 for 24 h; at pH 8 in the presence of 300 mM NaCl for 24 h, to prevent ion exchange. The immobilization under all conditions showed a significant increase in the enzyme thermal stability under inactivation conditions at pH 4-10. As a result, at temperatures over 70 °C or pH values over 7, the immobilized PG maintained significant levels of activity while the free PG was fully inactivated. The immobilization conditions presented a clear effect on enzyme activity, thermostability and operational stability, suggesting that the different conditions permitted to get immobilized PG having different orientations. Varying the immobilization protocol it is possible to achieve high activity or stability, and the optimal biocatalyst depends on the conditions where it will be utilized. The immobilized PG biocatalysts could be reused 10 times without a significant decrease in enzyme activity and offered very linear reaction courses.

Structure and Bioactivities of Porphyrans and Oligoporphyrans.

BACKGROUND: Pyropia (Porphyra), commonly known as nori or laver, is an important food source in many parts of the world. Edible dried Pyropia contains numerous nutrients and biofunctional components, including proteins, vitamins, eicosapentaenoic acid, minerals, carotenoids, mycosporine-like amino acids, and carbohydrate, and one of the compounds which we are interested in is porphyran, a sulfated polysaccharide comprising the hot-water-soluble portion of Pyropia cell walls. Researchers have performed a large number of in-depth studies on the biological activity and potential therapeutic applications of porphyrans and oligoporphyrans. METHODS: This mini review aims to provide comprehensive and update overview on the source, extraction, structure, biological activities and structure-activity relationships of porphyrans and oligoporphyrans based on the studies in the past 30 years which were included in Web of Science. RESULTS: The structure of porphyran has been basically determined given that its straight chain is relatively simple, and the skeleton structure has been described. The extraction methods were simplified continuously, but different extraction methods and post- processing methods still had great influence on the structure and composition of porphyran, so there was no standardized extraction process which can achieve quality control until now. In order to obtain oligoporphyrans, there are a variety of degradation methods, including chemical method, physical method and enzymatic method, but it is worth mentioning that specific degradation enzyme is still unavailable. Studies on the biological and pharmacology properties include antioxidant, anti-tumor, anti-inflammatory, immunomodulation, anti-cardiovascular and cerebrovascular diseases and drug delivery. CONCLUSION: Owing to the therapeutic potential and drug delivery applications, porphyran and oligoporphyrans are expected to be further developed as a medicine against human diseases, as well as a supplement in cosmetics and health products.

Evaluation of Prebiotic Potential of Three Marine Algae Oligosaccharides from Enzymatic Hydrolysis.

Alginate oligosaccharides (AlgO), agarose oligosaccharides (AO), and κ-carrageenan oligosaccharides (KCO) were obtained by specific enzymatic hydrolysis method. The molecular weight distributions of the three oligosaccharides were 1.0⁻5.0 kDa, 0.4⁻1.4 kDa, and 1.0⁻7.0 kDa, respectively. The culture medium was supplemented with the three oligosaccharides and fermented by pig fecal microbiota in vitro, for 24 h. Each oligosaccharide was capable of increasing the concentration of short-chain fatty acids (SCFAs), especially butyric acid, and altering the microbiota composition. Linear discriminant analysis effect size (LEfSe) analysis results showed that the opportunistic pathogenic bacteria Escherichia, Shigella, and Peptoniphilus, were significantly decreased in AlgO supplemented medium. AO could improve the gut microbiota composition by enriching the abundance of Ruminococcaceae, Coprococcus, Roseburia, and Faecalibacterium. Besides, KCO could increase the abundance of SCFA microbial producers and opportunistic pathogenic flora. Therefore, these results indicate that AlgO and AO can be used as gut microbial regulators and can potentially improve animal/human gastrointestinal health and prevent gut disease, whereas the physiological function of KCO needs further evaluation.

Nanoclusters of crystallographically aligned nanoparticles for magnetic thermotherapy: aqueous ferrofluid, agarose phantoms and ex vivo melanoma tumour assessment.

Magnetic hyperthermia is an oncological therapy where magnetic nanostructures, under a radiofrequency field, act as heat transducers increasing tumour temperature and killing cancerous cells. Nanostructure heating efficiency depends both on the field conditions and on the nanostructure properties and mobility inside the tumour. Such nanostructures are often incorrectly bench-marketed in the colloidal state and using field settings far off from the recommended therapeutic values. Here, we prepared nanoclusters composed of iron oxide magnetite nanoparticles crystallographically aligned and their specific absorption rate (SAR) values were calorimetrically determined in physiological fluids, agarose-gel-phantoms and ex vivo tumours extracted from mice challenged with B16-F0 melanoma cells. A portable, multipurpose applicator using medical field settings; 100 kHz and 9.3 kA m-1, was developed and the results were fully analysed in terms of nanoclusters' structural and magnetic properties. A careful evaluation of the nanoclusters' heating capacity in the three milieus clearly indicates that the SAR values of fluid suspensions or agarose-gel-phantoms are not adequate to predict the real tissue temperature increase or the dosage needed to heat a tumour. Our results show that besides nanostructure mobility, perfusion and local thermoregulation, the nanostructure distribution inside the tumour plays a key role in effective heating. A suppression of the magnetic material effective heating efficiency appears in tumour tissue. In fact, dosage had to be increased considerably, from the SAR values predicted from fluid or agarose, to achieve the desired temperature increase. These results represent an important contribution towards the design of more efficient nanostructures and towards the clinical translation of hyperthermia.

Novel Two-Step Process Utilizing a Single Enzyme for the Production of High-Titer 3,6-Anhydro-l-galactose from Agarose Derived from Red Macroalgae.

3,6-Anhydro-l-galactose (l-AHG), a major component of agarose derived from red macroalgae, has excellent potential for industrial applications based on its physiological activities such as skin whitening, moisturizing, anticariogenicity, and anti-inflammation. However, l-AHG is not yet commercially available due to the complexity, inefficiency, and high cost of the current processes for producing l-AHG. Currently, l-AHG production depends on a multistep process requiring several enzymes. Here, we designed and tested a novel two-step process for obtaining high-titer l-AHG by using a single enzyme. First, to depolymerize agarose preferentially into agarobiose (AB) at a high titer, the agarose prehydrolysis using phosphoric acid as a catalyst was optimized at a 30.7% (w/v) agarose loading, which is the highest agarose or agar loading reported so far. Then AB produced by the prehydrolysis was hydrolyzed into l-AHG and d-galactose (d-Gal) by using a recently discovered enzyme, Bgl1B. We suggest that this simple and efficient process could be a feasible solution for the commercialization and mass production of l-AHG.

Guar gum blended alginate/agarose hydrogel as a promising support for the entrapment of peroxidase: Stability and reusability studies for the treatment of textile effluent.

Ginger peroxidase (GP) was entrapped into the hydrogels of guar gum (GG)-alginate/agarose and these immobilized GP preparations were employed for the treatment of textile effluent. GG is a natural hydrophilic polysaccharide, the average size of which increases in its hydrated form that helps in retaining the enzyme inside the entrapping support. Therefore, the activity retention by alginate-guar gum (ANGG) and agarose-guar gum (AGG) was higher than that of alginate and agarose alone. ANGG-GP and AGG-GP were highly stable against various physical and chemical denaturants during the decolorization of textile effluent. As compared to free GP, both the immobilized preparations were more efficient in the decolorization of textile effluent in batch processes. After 10th repeated use in batch processes, ANGG-GP and AGG-GP was quite effective in removing up to 68% and 55% of the color from textile effluent, respectively. Continuous packed bed reactors containing ANGG-GP and AGG-GP were able to decolorize around 80% and 69% of the effluent color, respectively, even after 30 days of their continuous operation at room temperature (30 °C). Genotoxicity of textile effluent was significantly reduced after GP mediated decolorization.

Increase in anti-inflammatory activities of radical-degraded porphyrans isolated from discolored nori (Pyropia yezoensis).

The anti-inflammatory properties of porphyrans (D1-D4) obtained from four discolored nori (Pyropia yezoensis) with different growth backgrounds were studied to examine possible variations in their bioactivities. Elution profiles of the porphyrans on Sepharose 4B indicated that D2-porphyran had relatively lower-molecular-size porphyrans than the other porphyrans. Inhibitory activities of the four porphyrans against nitric oxide (NO) and tumor necrosis factor-α (TNF-α) secretion by lipopolysaccharide (LPS)-stimulated RAW264.7 cells were different, whereas no significant differences were observed in the sulfate and anhydrogalactose levels. D2-porphyran showed the highest inhibitory activity against NO and TNF-α secretion by LPS-stimulated RAW264.7 cells, whereas D3- and D4-porphyrans had almost no activity. All porphyrans were efficiently degraded by free radical generated with ascorbate and hydrogen peroxide. The free-radical degradation resulted in a significant increase in the inhibitory activities of the four porphyrans against NO and TNF-α secretion, with varying rates depending on the porphyrans. The ability of D2-porphyran to suppress the receptor activator of nuclear factor κB ligand (RANKL)-induced osteoclastogenesis in RAW264.7 cells was also significantly enhanced after degradation. Our results suggest that molecular size is an important factor affecting the anti-inflammatory activity of porphyrans, and radical degradation might be a promising procedure to obtain active low-molecular-size porphyrans.

A Novel Assay for Screening Inhibitors Targeting HIV Integrase LEDGF/p75 Interaction Based on Ni(2+) Coated Magnetic Agarose Beads.

HIV-1 integrase (IN) plays an essential role in viral replication and thus serves as an important target for chemotherapeutic intervention against HIV-1 infection. However, the current three clinical IN inhibitors, raltegravir, elvitegravir and dolutegravir share the same inhibitory mechanism, resulting in a common clinical resistance profile which have emerged in infected patients receiving treatment. Therefore, it is important to develop small molecule inhibitors that impair IN function with distinct mechanisms of action. In this work, a magnetic-beads based biochemical assay targeting the protein-protein interaction (PPI) between HIV IN and the cellular cofactor LEDGF/p75 was developed for identification of HIV-1 IN inhibitors. Furthermore, a library containing 1000 US. Food and Drug Administration (FDA)-approved drugs currently used for human medication was screened to identify inhibitors targeting the PPI. The assay was proved to be quite robust and with the novel assay we successfully identified dexlansoprazole (IC50 of 4.8 µM), a FDA-approved proton pump inhibitor, as a potential inhibitor for the PPI between IN and LEDGF/p75, which bound to the LEDGF/p75 partner with a kinetic dissociation (Kd) constant of 330 nM ± 2.6 nM.