An iron oxide nanoworm hybrid on an interdigitated microelectrode silica surface to detect abdominal aortic aneurysms.

An abdominal aortic aneurysm (AAA) is abnormal swelling in the abdominal aorta and a prevalent life-threatening disease. This research introduces a new interdigitated microelectrode (IDME)-sensing surface modified by iron oxide nanoworms (IONWs) for detecting the AAA biomarker insulin-like growth factor-1 (IGF1). A sandwich pattern was formulated with the IGF1 aptamer and IGFBP1 (IGF binding protein-1) on the IONW-constructed IDME hybrid to identify IGF1. The surface morphology of the IONWs revealed a uniform distribution of worm-like structures (80-100 nm) as confirmed by FESEM and FETEM analyses. Further, the presence of the major elements, Fe and O, was confirmed by EDX and XPS studies. The crystal planes that appeared in the IONW reflect cubic magnetite. IONW-modified IDME attained a limit of detection for IGF1 of 1 fM (3σ) with an aptamer-IGF1-IGFBP1 sandwich. This sandwich with IGFBP1 enhanced the current level at all concentrations of IGF1 and displayed linearity in the range 1 fM to 100 pM with a determination coefficient of R2 = 0.9373 [y = 3.38221x - 4.79]. Control experiments with complementary aptamer sequences, IGF2 and IGFBP3 did not show notable signal changes, indicating the specific detection of IGF1. This IONW constructed electrode helps to achieve the detection of low amounts of IGF1 and diagnose AAA at the stage prior to rupture.

Electrochemical determination of hantavirus using gold nanoparticle-modified graphene as an electrode material and Cu-based metal-organic framework assisted signal generation.

An electrochemical biosensor was prepared for nucleic acid-based hantavirus detection using a Cu-based metal-organic framework (CuMOF) as a signal tag. The CuMOF was synthesized by the solvothermal method and then covalently bonded with signal DNA (sDNA) probes. The Au nanoparticles and reduced graphene oxide composite were deposited on the electrode surface by electroreduction as support substrate and was then functionalized with capture DNA (cDNA) probes by self-assembly. Through the complementary base pairing, the target DNA (tDNA) fragment of hantavirus hybridized with the cDNA and the sDNA in a sandwich-type format. The tDNA was detected according to the current signal of the CuMOF catalyzed reaction using o-phenylenediamine as redox substrate. The peak current of the biosensor at - 0.55 V increased linearly in proportion to the logarithmic value of the tDNA concentration from 10-15 to 10-9 mol/L, with a detection limit of 0.74 × 10-15 mol/L. Moreover, the proposed biosensor was successfully applied to detect hantavirus and was able to distinguish hantavirus from other arboviruses.

Microporous P-doped carbon spheres sensory electrode for voltammetry and amperometry adrenaline screening in human fluids.

An electrochemical sensor-based phosphorus-doped microporous carbon spheroidal structures (P-MCSs) has been designed for selective adrenaline (ADR) signaling in human blood serum. The P-MCS electrode sensor is built with heterogeneous surface alignments including multiple porous sizes with open holes and meso-/macro-grooves, rough surface curvatures, and integral morphology with interconnected and conjugated microspheres. In addition, the P atom-doped graphitic carbon forms highly active centers, increases charge mobility on the electrode surface, creates abundant active centers with facile functionalization, and induces binding to ADR molecules. The designed P-MCS electrode exhibits ultrasensitive monitoring of ADR with a low detection limit of 0.002 µM and high sensitivity of 4330 µA µM-1 cm-2. In addition, two electrochemical techniques, namely, square wave voltammetry (SWV) and chronoamperometry (CA), were used; these techniques achieve high stability, fast response, and a wide linear range from 0.01 to 6 µM. The sensing assays based on P-MCSs provide evidence of the formation of active interfacial surface-to-ADR binding sites, high electron diffusion, and heavy target loads along with/without a plane of spheroids. Thus, P-MCSs can be used for the routine monitoring of ADR in human blood serum, providing a fast response, and requiring highly economical materials at extremely low concentrations. Electrode surface modulation based on P-doped carbon spheres (P-MCS) exhibits high electrochemical activity with fast charge transport, multi-diffusible active centers, high loading of ADR, and facile molecular/electron diffusion at its surface. The P-MCS sensitively and selectively detects the ADR in human fluids and can be used for clinical investigation of some neuronal diseases such as Alzheimer diseases.

Magnetic molecularly imprinting polymers, reduced graphene oxide, and zeolitic imidazolate frameworks modified electrochemical sensor for the selective and sensitive detection of catechin.

A glassy carbon electrode (GCE) was modified with magnetic molecularly imprinted polymers (mMIPs) using catechin as a template, reduced graphene oxide (rGO), and zeolitic imidazolate frameworks-8 (ZIF-8) for the sensitive detection of catechin (mMIPs/rGO-ZIF-8/GCE). The prepared rGO, ZIF-8, and mMIPs exhibited typical structures and properties determined by various characterizations. The mMIPs showed good selectivity for catechin among several structural analogs. The mMIPs/rGO-ZIF-8/GCE showed a higher maximum peak current for catechin than that of a single component modified GCE. After the optimization of the material ratio, coating amounts, pH, and scan rate, the mMIPs/rGO-ZIF-8/GCE exhibited good selectivity, good linearity, and a low detection limit (LOD) for catechin. The linear range was 0.01 nmol/L-10 µmol/L and the LOD was 0.003 nmol/L (S/N = 3). The relative standard deviations for reproducibility and stability tests (n = 6) were 5.2% and 6.1%, respectively. A recovery between 99.1 and 101.3% was obtained in the detection of catechin in spiked samples. Based on these findings, the proposed mMIPs/rGO-ZIF-8/GCE could be developed further, and future research could be conducted on alternate fabrication strategies and methods to create more portable and practical electrochemical sensors. Graphical Abstract.

Green synthesis of silver nanoparticles using pollen extract: Characterization, assessment of their electrochemical and antioxidant activities.

In the present study, a simple, cheaply and environmental friendly method was evaluated for the synthesis of silver nanoparticle via Cupressus sempervirens L. (CSPE) pollen extract as reducing and stabilizing agent. Various parameters such as volume of CSPE, temperature and reaction time on AgNPs formation were investigated spectrophotometrically to optimize reaction conditions. The electrochemical behavior of the biosynthesized AgNPs were investigated by cyclic voltammetry and square wave voltammetry techniques. An electrosensor based on AgNPs modified glassy carbon electrode were constructed and tested on electro reduction of hydrogen peroxide in phosphate buffer medium. The prepared electrosensor could detect the H2O2 in the range of 5.0 µM - 2.5 mM with a detection limit of 0.23 µM. In addition, the antioxidant activity of biosynthesized AgNPs were evaluated against DPPH free radical. Results obtained from the antioxidant study suggested that CSPE mediated AgNPs exhibit a good antioxidant effect.

Electrochemical sensing platform based on covalent organic framework materials and gold nanoparticles for high sensitivity determination of theophylline and caffeine.

A new covalent organic framework (COF) has been prepared with 1,3,6,8-tetra(4-formyl phenyl) pyrene (TFPPy) and 2,6-diaminopyridine (DP) as building units through a Schiff base reaction by a simple tube oven heating procedure and the structure of the COF has been characterized in detail. The obtained DP-Py COF is employed to fabricate a novel electrochemical sensing platform for sensitive and selective determination of theophylline (TP) and caffeine (CAF) simultaneously through compounding with AuNPs; the peak positions of TP and CAF are 0.95 V and 1.28 V, respectively. The synergistic effect between DP-Py COF and AuNPs effectively enhances the analytical sensitivity for the target analytes. Under the optimized experimental conditions, the electrochemical sensing platform shows a sensitive voltammetric response and wide linear range to both TP and CAF, and the detection limits are 0.19 µM and 0.076 µM (S/N = 3), respectively. This method has been successfully used for the determination of TP and CAF in compound paracetamol capsules and black tea samples. The recovery and relative standard deviations (RSD) of TP are 99.3~101% and 97.6~101% and 1.3~2.0% and 1.3~2.1%, respectively, and the recovery and RSD of CAF are 96.1~102% and 99.4~104% and 2.8~3.9% and 1.7~3.2%, respectively. Compared with traditional detection methods, the constructed sensing platform has better performance and is expected to be widely used also in other real sample analyses.

Electrochemical flow injection analysis for the rapid determination of reducing sugars in potatoes.

Non-enzymatic electrochemical sensors for the monitoring of reducing sugars in foods has great potential as a rapid in-situ detection method. This development involved the assembly of a nanoporous platinum structure on a screen-printed carbon electrode (SPCE). The modified electrode was then employed as an amperometric sensing element in a flow injection analysis (FIA) manifold. The system was successfully applied to the rapid detection of reducing sugars in potatoes, without the need for sample preparation. Optimal signals were achieved in phosphate buffer (pH 7.4) at a flow rate of 0.5 mL min-1 and an applied potential of 0.6 V. Experimental results demonstrated the sensor's long-term stability and high selectivity for reducing sugars. This method provides high sample throughput due to a rapid response time of less than five seconds. Reducing sugar values determined were in good agreement with those recorded using a commercially available enzymatic assay kit.

Ultrasensitive photoelectrochemical aptasensor for diclofenac sodium based on surface-modified TiO2-FeVO4 composite.

Herein, a photoelectrochemical (PEC) aptasensing platform was designed by integrating surface oxygen vacancy (OV) defects, Ti3+ self-doping, the heterojunction, and resonance energy transfer (RET) effect into one platform for the detection of diclofenac sodium (DCF). Briefly, OV defects were introduced on TiO2 nanospheres with simultaneous Ti3+ self-doping, followed by a well-separated deposition of FeVO4 nanoparticles on TiO2 to obtain a Ti3+-O-TiO2/FeVO4 heterojunction. The surface modification of OVs, Ti3+ doping, and deposition of FeVO4 were confirmed by SEM, XPS, EPR, DRS, and PEC measurements. The surface OVs and doping of Ti3+ species created a new donor (defect) energy level under the conduction band of TiO2, which minimized the bandgap and thereby improved the visible light absorption of TiO2. Moreover, the capture of photo-excited electrons by surface OVs could hinder the electron-hole recombination. Due to the intimate surface contact and perfect energy matching between TiO2 and FeVO4, the formation of heterojunction decreased the bandgap and facilitated the electron-hole separation of TiO2. All these above events contributed to the enhancement of the PEC signals, which were then quenched by the RET effect between Ti3+-O-TiO2/FeVO4 and Au nanoparticle (AuNP)-labeled cDNA that had been attached to its complementary DCF aptamer on Ti3+-O-TiO2/FeVO4|ITO. The addition of target-DCF detached AuNP-labeled cDNA from the electrode to recover the photocurrent, resulting in a "signal-on" PEC aptasensor that exhibited a 0.1-500-nM linear range and a detection limit of 0.069 nM for DCF, attributed to the excellent amplification of the proposed aptasensing platform.

Molybdenum disulfide-gold nanoparticle nanocomposite in field-effect transistor back-gate for enhanced C-reactive protein detection.

Nanofabricated gold nanoparticles (Au-NPs) on MoS2 nanosheets (Au-NPs/MoS2) in back-gated field-effect transistor (BG-FET) are presented, which acts as an efficient semiconductor device for detecting a low concentration of C-reactive protein (C-RP). The decorated nanomaterials lead to an enhanced electron conduction layer on a 100-µm-sized transducing channel. The sensing surface was characterized by Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), atomic force microscopy (AFM), scanning electron microscopy (SEM), and high-power microscopy (HPM). The BG-FET device exhibits an excellent limit of detection of 8.38 fg/mL and a sensitivity of 176 nA/g·mL-1. The current study with Au-NPs/MoS2 BG-FET displays a new potential biosensing technology; especially for integration into complementary metal oxide (CMOS) technology for hand-held future device application.

Novel plant flavonoid electrochemical sensor based on in-situ and controllable double-layered membranes modified electrode.

Identification and quantification of plant flavonoids are critical to pharmacokinetic study and pharmaceutical quality control due to their distinct pharmacological functions. Here we report on a novel plant flavonoid electrochemical sensor for sensitive and selective detection of dihydromyricetin (DMY) based on double- layered membranes consisting of gold nanoparticles (Au) anchored on reduced graphene oxide (rGO) and molecularly imprinted polymers (MIPs) modified glassy carbon electrode (GCE). Both rGO-Au and MIPs membranes were directly formed on GCE via in-situ electrochemical reduction and polymerization processes step by step. The compositions, morphologies, and electrochemical properties of membranes were investigated with X-ray powder diffractometry (XRD), Fourier transform infrared spectrum (FTIR), Field emission scanning electron microscopy (FESEM) combined with various electrochemical methods. The fabricated electrochemical sensor labeled as GCE│rGO-Au/MIPs exhibited excellent performance in determining of DMY under optimal experimental conditions. A wide linear detection range (LDR) ranges from 2.0×10-8 to 1.0×10-4 M together with a low limit of detection (LOD) of 1.2×10-8 M (S/N = 3) were achieved. Moreover, the electrochemical sensor was employed to determine DMY in real samples with satisfactory results.

A novel SWCNT-amplified "signal-on" electrochemical aptasensor for the determination of trace level of bisphenol A in human serum and lake water.

A novel "signal-on" electrochemical aptasensor was developed for ultrasensitive and specific detection of BPA, using single-walled carbon nanotubes (SWCNT) as the electro-catalytic probe for further signal amplification. The multi-walled carbon nanotubes (MWCNT), amino-functionalized magnetite, and gold nanoparticles (NH2-Fe3O4/Au NPs) were applied first to modify the glassy carbon electrode (GCE) surface and to form a nanomaterial film with satisfactory conductive properties, stability, and biocompatibility. The BPA aptamer was then loaded onto the sensing platform by hybridization with complementary DNA (CDNA). In the presence of BPA it combines with the aptamer and the BPA-aptamer conjugate was released from the electrode;subsequently the added SWCNT and CDNA assembled quickly. Thus, the dual-amplification of the "signal-on" electrochemical aptasensor takes effect. The [Fe (CN)6]3-/4- redox probe signal (∆I) detected by DPV (differential pulse voltammetry) is proportional to the negative logarithm of BPA concentration between 10-19 M and 10-14 M. The detection limit is 0.08 aM. Importantly, the proposed biosensor represents a successful application for determination of BPA in human serum and lake water. Schematic representation of SWCNT-amplified "signal-on" electrochemical aptasensor for the detection of trace level of bisphenol A in human serum and lake water.

Highly efficient electrochemical gas reduction on a three-dimensional foam electrode: mechanism and application for the determination of hazardous mercury in complex matrix.

For the first time a nickel foam electrode (NFE) is applied in the field of electrochemical vapor generation (EVG) to carry out the electrochemical vapor phase conversion of mercury. Systematical electrochemical and morphological research has demonstrated that the specific surface area of the NFE was several times larger than that of the metal/non-metal electrode with the same geometric size. At the same time, the 3D porous channel composed of multi-layer nickel wire ensures the full contact between reactant and interface. The evident enhancement of spectral signals on a Ni electrode (283%), compared with Pt (27%) and graphite (109%), confirmed that the NFE effectively enhances the yield of mercury reduction. The NFE exhibits low limit of detection (0.017 µg L-1) and a wide linear range (0.2-20 µg L-1) with recoveries of actual samples in the range 87.8-117% towards Hg2+. Although the NFE has no advantage in electronic transmission and catalytic performance, its excellent stability, especially anti-interference and other characteristics, is sufficient for the analysis of hazardous mercury in complex matrix including certified reference materials and real samples.

Multiscale real time and high sensitivity ion detection with complementary organic electrochemical transistors amplifier.

Ions are ubiquitous biological regulators playing a key role for vital processes in animals and plants. The combined detection of ion concentration and real-time monitoring of small variations with respect to the resting conditions is a multiscale functionality providing important information on health states. This multiscale functionality is still an open challenge for current ion sensing approaches. Here we show multiscale real-time and high-sensitivity ion detection with complementary organic electrochemical transistors amplifiers. The ion-sensing amplifier integrates in the same device both selective ion-to-electron transduction and local signal amplification demonstrating a sensitivity larger than 2300 mV V-1 dec-1, which overcomes the fundamental limit. It provides both ion detection over a range of five orders of magnitude and real-time monitoring of variations two orders of magnitude lower than the detected concentration, viz. multiscale ion detection. The approach is generally applicable to several transistor technologies and opens opportunities for multifunctional enhanced bioelectronics.

Specific recognition of ion channel blocker by high-content cardiomyocyte electromechanical integrated correlation.

Cardiac arrhythmia and drug-induced cardiotoxicity seriously threaten the human life. To develop antiarrhythmic agents and prevent the drug-induced cardiotoxicity, it is demanded to explore the high-specificity and high-efficiency drug screening platforms for preclinical investigations. Here, a specific electromechanical integrated correlation (EMIC) model was established based on the synchronized signal recording of cardiomyocyte-based biosensing system. The cardiomyocyte-based biosensing system consists of an integrated electromechanical device and a synchronized recording instrument. By extracting the feature points and correlation information of both electrical and mechanical signals, the multi-parameters of EMIC are applied for the drug recognition, showing the good specificity to analyze the typical Na+, K+, Ca2+ channel blockers. Further, visualized analysis of EMIC parameters was performed using the extracted parameters of synchronized recording signals to present the drug specific recognition functions. By heat map, radar map, and principal component analysis (PCA), the specific features and patterns were intuitively displayed to achieve the drug recognition. We believe this high-content and high-specific drug recognition strategy will be a promising and alternative method for the preclinical screening of cardiac safety and drug development in biomedical fields.

Increasing the Sensitivity of Electrochemical DNA Detection by a Micropillar-Structured Biosensing Surface.

The available active surface area and the density of probes immobilized on this surface are responsible for achieving high specificity and sensitivity in electrochemical biosensors that detect biologically relevant molecules, including DNA. Here, we report the design of gold-coated, silicon micropillar-structured electrodes functionalized with modified poly-l-lysine (PLL) as an adhesion layer to concomitantly assess the increase in sensitivity with the increase of the electrochemical area and control over the probe density. By systematically reducing the center-to-center distance between the pillars (pitch), denser micropillar arrays were formed at the electrode, resulting in a larger sensing area. Azido-modified peptide nucleic acid (PNA) probes were click-reacted onto the electrode interface, exploiting PLL with appended oligo(ethylene glycol) (OEG) and dibenzocyclooctyne (DBCO) moieties (PLL-OEG-DBCO) for antifouling and probe binding properties, respectively. The selective electrochemical sandwich assay formation, composed of consecutive hybridization steps of the target complementary DNA (cDNA) and reporter DNA modified with the electroactive ferrocene functionality (rDNA-Fc), was monitored by quartz crystal microbalance. The DNA detection performance of micropillared electrodes with different pitches was evaluated by quantifying the cyclic voltammetric response of the surface-confined rDNA-Fc. By decrease of the pitch of the pillar array, the area of the electrode was enhanced by up to a factor 10.6. A comparison of the electrochemical data with the geometrical area of the pillared electrodes confirmed the validity of the increased sensitivity of the DNA detection by the design of the micropillar array.

Sensitive and reliable electrochemical detection of nitrite and H2O2 embellish-CoPc coupled with appliance of composite MWCNTs.

The electrocatalytic properties of tetra L-Methionine cobalt (II) phthalocyanine (CoTL-MethPc) and functionalized MWCNTs, decorated on glassy carbon electrode (GCE) was investigated. The synthesis of the CoTL-MethPc was confirmed using UV-Vis, FT-IR, XRD, TGA and MASS techniques. Successful modification of GCE with the CoTL-MethPc and their composite was also confirmed using cyclic voltammetry (CVs), differential pulse voltammetry (DPV) and chrono-amperometry (CA) techniques. CoTL-MethPc/MWCNTs/GCE was the best electrode towards nitrite and hydrogen peroxide (H2O2) detection with a very low detection limit (30 and 10 nmol L-1) by CVs method, which compared favorably with literature, good sensitivity, electrocatalytic oxidation of nitrite and hydrogen peroxide on CoTL-MethPc/MWCNTs/GCE electrode was diffusion controlled but characterized with some adsorption of electro-oxidation-reduction reaction intermediates products. The fabricated sensors are easy to prepare, cost-effective and can be applied for real sample analysis of nitrite in beetroot vegetable. The excellent electrocatalytic property of CoTL-MethPc/MWCNTs is high reproducibility, repeatability, selectivity.

Kinetic modeling for high voltage electrical discharge extraction based on discharge energy input.

In this work, a kinetic model for protein extraction from Camellia oleifera seed cake using high voltage electrical discharge extraction (HVED) was built with discharge energy inputs as primary variables. The results showed that both the equilibrium yields and the mass transfer coefficient of HVED were highly dependent on the HVED specific energy input per pulse (kJ/kg). After linear and nonlinear fitting with five different basic functions, the best model satisfied the power function relationship through optimizing the influence of specific energy input per pulse on the equilibrium yields and the mass transfer coefficients. Based on the observations, a predictive model that correlates the energy input, mass of raw material and kinetics of HVED extraction was proposed. The validity of the predictive model was verified, and the observed deviation was found to be less than 10%. This could provide a model basis for optimization of HVED at different processing capacities.

Cooperation Mode of Outer Surface and Inner Space of Nanochannel: Separation-Detection System Based on Integrated Nanochannel Electrode for Rapid and Facile Detection of Salmonella.

Nanochannels hold great prospects in intelligent systems; however, current research focuses on the inner space of the nanochannel while the outer surface is rarely explored. Here, we report on a cooperation mode of the outer surface and inner space of the nanochannel using an integrated nanochannel-electrode (INCE) and its application as a separation-detection system for rapid and facile detection of foodborne bacteria. Unlike conventional nanochannel systems, the INCE integrates two electrodes as a sensitive electrochemical interface and the nanochannel itself as nanofilter, generating a novel separation-detection system. The system is examined in a biosensing strategy based on magnetic nanoparticles (MNPs). Salmonella typhimurium (St) is taken as the target due to its severe threat to human health and food safety. By electrochemically probing the MNPs-St complex themselves on the surface of INCE, this method eliminates the requirement on additional signal labels. The biosensor presents a linear detection range from 102 to 107 CFU mL-1 and a limit of detection of 50 CFU mL-1, being comparable or even better than those of analogues with complicated signal amplification designs. Moreover, the biosensor exhibits good specificity against four types of interfering bacteria. This concept may bring new insight into the development of nanochannel research and contribute a new way to the fields of separation and detection.

A novel zinc finger protein-based amperometric biosensor for miRNA determination.

This paper reports a simple electrochemical strategy for the determination of microRNAs (miRNAs) using a commercial His-Tag-Zinc finger protein (His-Tag-ZFP) that binds preferably (but non-sequence specifically) RNA hybrids over ssRNAs, ssDNAs, and dsDNAs. The strategy involves the use of magnetic beads (His-Tag-Isolation-MBs) as solid support to capture the conjugate formed in homogenous solution between His-Tag-ZFP and the dsRNA homohybrid formed between the target miRNA (miR-21 selected as a model) and a biotinylated synthetic complementary RNA detector probe (b-RNA-Dp) further conjugated with a streptavidin-horseradish peroxidase (Strep-HRP) conjugate. The electrochemical detection is carried out by amperometry at disposable screen-printed carbon electrodes (SPCEs) (- 0.20 V vs Ag pseudo-reference electrode) upon magnetic capture of the resultant magnetic bioconjugates and H2O2 addition in the presence of hydroquinone (HQ). The as-prepared biosensor exhibits a dynamic concentration range from 3.0 to 100 nM and a detection limit (LOD) of 0.91 nM for miR-21 in just ~ 2 h. An acceptable discrimination was achieved between the target miRNA and other non-target nucleic acids (ssDNA, dsDNA, ssRNA, DNA-RNA, miR-122, miR-205, and single central- or terminal-base mismatched sequences). The biosensor was applied to the analysis of miR-21 from total RNA (RNAt) extracted from epithelial non-tumorigenic and adenocarcinoma breast cells without target amplification, pre-concentration, or reverse transcription steps. The versatility of the methodology due to the ZFP's non-sequence-specific binding behavior makes it easily extendable to determine any target RNA only by modifying the biotinylated detector probe.

A label-free electrochemical aptasensor based on 3D porous CS/rGO/GCE for acetamiprid residue detection.

A novel label-free electrochemical aptasensor was fabricated based on a three-dimensional porous electrode (3D-CS/rGO/GCE) for the detection of acetamiprid residues. The sensing signal was generated by the DNA itself. The porous electrode was prepared by electrodeposition in situ and characterized by scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). These results indicated that the porous electrode has a uniform nanoporous structure, high active area, and excellent conductivity, leading to improve the transmission efficiency of current signals. The 3D-CS/rGO/GCE was used to increase a load of acetamiprid aptamer on the electrode. Meanwhile, DNA self-assembly strategy was used to further increase the DNA amounts. Thus the electrochemical current was amplified significantly due to increased phosphate group amounts by the above synergistic effect. The determination of acetamiprid residues using square wave voltammetry (SWV) showed good sensitivity, with the linear range from 0.1 pM to 0.1 µM and the detection limit was 71.2 fM. The label-free electrochemical aptasensor was also used to detect acetamiprid residues in tea samples with satisfactory results.