Luminescence chronology for the Paleolithic site of Xinmiaozhuang Locality 1 (XMZ1) in the Nihewan Basin, northern China, and its paleoenvironmental and archaeological implications.

In contrast to the prevailing view that the Chinese Paleolithic has been dominated by the Mode 1 technology-with a slow and conservative development from the Early to the Late Pleistocene-recent discoveries indicate that the lithic technology might have developed into an 'advanced' phase in some parts of China, at least since the early Late Pleistocene. The Xinmiaozhuang Locality 1 (XMZ1), located on the southern edge of the Nihewan Basin in northern China, is one of the examples belonging to such an 'advanced' phase. Although the stone artifacts at this site still belong to the long-existing 'small-tool' industry (core-and-flake) in this basin, some 'advanced' traits, including discoidal cores, elongated flakes, and 'Mousterian-like' triangular points and scrapers, are present. We provide a dating of the XMZ1 using the multiple elevated temperatures (MET) post infrared (pIR) infrared stimulated luminescence (IRSL) procedure (MET-pIRIR) on both multigrained single aliquots and 'individual' grains of potassium-rich feldspars (K-feldspars). The consistency between the single-aliquot and single-grain K-feldspar equivalent dose results mutually confirmed the reliability of the obtained ages. Our chronology indicates that the cultural layer falls within the period of ca. 63-75 ka, corresponding to the early stage of the Marine Isotope Stage (MIS) 4. Based on the correlation of the cultural age to the environmental proxies of loess and stalagmites from China, we suggest that the site might have witnessed dramatic fluctuations of paleoclimate during the site formation. Additionally, based on the discoidal cores distribution, a potential corridor along the Xuefeng-Wu-Tainhang-Great Khingan Mountains for ancient humans migrating between South and North China is suggested. However, more archaeological and chronological studies are required to figure out the origin and the dispersal patterns of the discoidal core associated with lithic assemblage and the tool-makers in East Asia.

Cultural mosaics, social structure, and identity: The Acheulean threshold in Europe.

The period between 600 and 400 ka is a critical phase for human evolution in Europe. The south and northwest saw a dramatic increase in sites, the spread of handaxe technology alongside bone and wooden tool manufacture, efficient hunting techniques, and the use of fire. Lithic assemblages show considerable variation, including the presence/absence of handaxes and tool morphology. To explain this variation, we propose the Cultural Mosaic Model, which suggests that there is a range of expressions of the Acheulean, with local resources being instrumental in creating distinct material cultures with or without handaxes. We argue that if typologically and technologically distinct assemblage types are regionally distributed, chronologically separated, and persistent over time, then they are unlikely to be caused purely by raw material constraints or functional variation but rather reflect populations with different material cultures. We initially assess the model using British data. Britain was a northwestern peninsula of Europe, and oscillations in climate led to episodic occupation. The terraces of the pre-MIS 12 Bytham River provide a framework for dating occupation to MIS 13 and 15, while during MIS 11, archaeological sites with rich environmental records can be dated to substage level. We suggest there are six chronologically and typologically distinct assemblage types that reflect a series of population incursions into Britain. We review the broader European lithic record, which is consistent with the Cultural Mosaic Model. In developing the model, we suggest that during stable climate, localized cultures developed, while climatic change led to shifts in population, with increased knowledge exchange and gene flow. We suggest that group expression through material culture was an important stage in social development by promoting group cohesion, larger group size, better cooperation, improved knowledge transfer, and enabling populations to survive in larger foraging territories in northern Europe.

Biocultural evidence of precise manual activities in an Early Holocene individual of the high-altitude Peruvian Andes.

OBJECTIVES: Cuncaicha, a rockshelter site in the southern Peruvian Andes, has yielded archaeological evidence for human occupation at high elevation (4,480 masl) during the Terminal Pleistocene (12,500-11,200 cal BP), Early Holocene (9,500-9,000 cal BP), and later periods. One of the excavated human burials (Feature 15-06), corresponding to a middle-aged female dated to ~8,500 cal BP, exhibits skeletal osteoarthritic lesions previously proposed to reflect habitual loading and specialized crafting labor. Three small tools found in association with this burial are hypothesized to be associated with precise manual dexterity. MATERIALS AND METHODS: Here, we tested this functional hypothesis through the application of a novel multivariate methodology for the three-dimensional analysis of muscle attachment surfaces (entheses). This original approach has been recently validated on both lifelong-documented anthropological samples as well as experimental studies in nonhuman laboratory samples. Additionally, we analyzed the three-dimensional entheseal shape and resulting moment arms for muscle opponens pollicis. RESULTS: Results show that Cuncaicha individual 15-06 shows a distinctive entheseal pattern associated with habitual precision grasping via thumb-index finger coordination, which is shared exclusively with documented long-term precision workers from recent historical collections. The separate geometric morphometric analysis revealed that the individual's opponens pollicis enthesis presents a highly projecting morphology, which was found to strongly correlate with long joint moment arms (a fundamental component of force-producing capacity), closely resembling the form of Paleolithic hunter-gatherers from diverse geo-chronological contexts of Eurasia and North Africa. DISCUSSION: Overall, our findings provide the first biocultural evidence to confirm that the lifestyle of some of the earliest Andean inhabitants relied on habitual and forceful precision grasping tasks.

Breaking through the Aquitaine frame: A re-evaluation on the significance of regional variants during the Aurignacian as seen from a key record in southern Europe

The cultural dynamics that led to the appearance of the Aurignacian have intrigued archaeologists since the start of Paleolithic research. However, cultural reconstructions have often focused on a restricted region of Europe, namely the northern Aquitaine Basin. The Mediterranean Basin, though, is also a region worthy of consideration when testing if the Protoaurignacian was followed by the Early Aurignacian adaptive system. Fumane Cave is a pivotal site for tackling this issue because it contains evidence of repeated human occupations during the time span of the European Aurignacian. Here we investigate the diachronic variability of the lithic assemblages from five cultural units at Fumane Cave using a combination of reduction sequence and attribute analyses. This paper also reassesses the presence and stratigraphic reliability of the organic artifacts recovered at Fumane Cave. Our results show that the features of the Protoaurignacian techno-typology are present throughout the stratigraphic sequence, and by extension, to the onset of Heinrich Event 4. Additionally, the appearance of split-based points in the youngest phase is evidence of extensive networks that allowed this technological innovation to spread across different Aurignacian regions.

Fluted-point technology in Neolithic Arabia: An independent invention far from the Americas.

New World archaeologists have amply demonstrated that fluted point technology is specific to Terminal Pleistocene American cultures. Base-fluted, and rarer tip-fluted, projectile points from the Americas have been well-documented by archaeologists for nearly a century. Fluting is an iconic stone tool manufacturing method and a specific action that involves the extraction of a channel flake along the longitudinal axis of a bifacial piece. Here we report and synthesize information from Neolithic sites in southern Arabia, demonstrating the presence of fluting on a variety of stone tool types including projectile points. Fluted projectile points are known from both surface sites and stratified contexts in southern Arabia. Fluting technology has been clearly identified at the Manayzah site (Yemen) dating to 8000-7700 cal. BP. Examination of fluted points and channel flakes from southern Arabia enable a reconstruction of stone tool manufacturing techniques and reduction sequences (chaines opératoires). To illustrate the technological similarities and contrasts of fluting methods in Arabia and the Americas, comparative studies and experiments were conducted. Similarities in manufacturing approaches were observed on the fluting scars of bifacial pieces, whereas technological differences are apparent in the nature and localization of the flute and, most probably, the functional objective of fluting in economic, social and cultural contexts. Arabian and American fluted point technologies provide an excellent example of convergence of highly specialized stone tool production methods. Our description of Arabian and American fluting technology demonstrates that similar innovations and inventions were developed under different circumstances, and that highly-skilled and convergent production methods can have different anthropological implications.

Migration, adaptation, innovation: The spread of Neolithic harvesting technologies in the Mediterranean.

This article explores the changes that occurred in harvesting technology during the dispersal of the Neolithic in the Mediterranean basin. It does so through technological and use-wear analysis of flaked stone tools from archaeological sites dated between ca. 7000 and 5000 cal BCE, from the Aegean Sea to the westernmost coasts of Portugal. The main goal is to analyse the transformations that occurred in the harvesting toolkit. Our study reveals dynamics of continuity and change in sickles at a Mediterranean scale, resulting from adaptations of the migrant groups to the newly occupied territories and from processes of technological innovation. Adaptations in the production system of the inserts and in their use-pattern occurred in relation to lithic raw material availability and knappers' skills, but also in relation to the scale of production and farming techniques. A major shift took place in the north-western Mediterranean arc with the diffusion of parallel-hafted inserts, probably as a result of heterogeneous phenomena including the diffusion of new groups, technical transfers, establishment of new interaction networks and new systems of lithic production.

A chronological model for the Late Paleolithic at Shuidonggou Locality 2, North China.

The site of Shuidonggou Locality 2 offers important evidence for the Late Paleolithic sequence of north China. The site not only contains one of the earliest instances of ornamental freshwater shell and ostrich eggshell beads in the region, but also stone artifacts with features arguably resembling the Initial Upper Paleolithic (IUP) blade technology found farther north. The appearance of these innovative archaeological forms have been attributed to the arrival of hominin populations, possibly modern humans, into the region during Marine Isotope Stage 3. Yet, the chronology of the site remains debated due to ambiguities in the existing dates. In this study, we conduct a systematical radiocarbon analysis of charcoal and ostrich eggshell samples obtained throughout the site sequence. Both acid-base-acid and the more stringent acid-base-oxidation pretreatment methods were applied to the charcoal samples. The resulting ages follow an age-depth relationship that is consistent with the stratigraphic profile. In line with previous stratigraphic assessments, Bayesian age modeling suggests that site formation history can be split into two phases: an early phase 43-35 cal kBP associated with a lacustrine depositional environment, and a later phase 35-28 cal kBP associated with rapid terrestrial silt accumulation. The chronology of the archaeological layers containing IUP-like artifacts are placed at 43-39 cal kBP and 35-34 cal kBP respectively. This finding supports the interpretation that an IUP-like blade technology appeared in the SDG region by at least ~41 ka.

Direct evidence of Neanderthal fibre technology and its cognitive and behavioral implications.

Neanderthals are often considered as less technologically advanced than modern humans. However, we typically only find faunal remains or stone tools at Paleolithic sites. Perishable materials, comprising the vast majority of material culture items, are typically missing. Individual twisted fibres on stone tools from the Abri du Maras led to the hypothesis of Neanderthal string production in the past, but conclusive evidence was lacking. Here we show direct evidence of fibre technology in the form of a 3-ply cord fragment made from inner bark fibres on a stone tool recovered in situ from the same site. Twisted fibres provide the basis for clothing, rope, bags, nets, mats, boats, etc. which, once discovered, would have become an indispensable part of daily life. Understanding and use of twisted fibres implies the use of complex multi-component technology as well as a mathematical understanding of pairs, sets, and numbers. Added to recent evidence of birch bark tar, art, and shell beads, the idea that Neanderthals were cognitively inferior to modern humans is becoming increasingly untenable.

Learning to stand tall: Idiopathic scoliosis, behavioral electronics, and technologically-assisted patient participation in treatment, c. 1969-1992.

Drawing on the archives of American learning psychologist Neal E. Miller, this article investigates the role of instrumentation in the expansion and diversification of the behavior therapy domain from the late 1960s to the early 1990s. Through the case of Miller's research on the use of biofeedback to treat idiopathic scoliosis, it argues that the post-World War II adoption of electronic technology by behavioral psychologists contributed to extending their subject matter to include physiological processes and somatic conditions. It also enabled a technologically-instrumented move outside the laboratory through the development of portable ambulatory treatment devices. Using the example of the Posture-Training Device that Miller and his collaborators invented for the behavioral treatment of idiopathic scoliosis, this paper considers how electromechanical psychological instrumentation illustrated a larger and ambiguous strategic shift in behavior therapy from an orientation toward external control to one of self-control.

"My Momma don tol me/When I was in knee pants": Why genetic arguments for Acheulean handaxes are more like singing the blues.

The Acheulean handaxe has always been considered a social phenomenon. Corbey et al.35 provide a major challenge to this argument, arguing quite rightly, that it has never been independently established that handaxe temporal depth is a product of intergenerational social learning. They take a number of assumptions integral to the social argument and suggest, using parsimony, that a genetic explanation is equally as plausible for each of them. Complex structures, in hierarchically nested routines of action, can be built in the natural world by organisms following predetermined genetic sequences of actions triggered by external circumstances. However, there are some important points that the genetic argument dismisses that demonstrate an unequivocal social origin for the Acheulean handaxe. This article identifies those points and restores them to the debate. Parsimony affirms a social basis for handaxes and does not require a theoretical genetic predisposition.

Late Upper Paleolithic occupation at Cooper's Ferry, Idaho, USA, ~16,000 years ago.

Radiocarbon dating of the earliest occupational phases at the Cooper's Ferry site in western Idaho indicates that people repeatedly occupied the Columbia River basin, starting between 16,560 and 15,280 calibrated years before the present (cal yr B.P.). Artifacts from these early occupations indicate the use of unfluted stemmed projectile point technologies before the appearance of the Clovis Paleoindian tradition and support early cultural connections with northeastern Asian Upper Paleolithic archaeological traditions. The Cooper's Ferry site was initially occupied during a time that predates the opening of an ice-free corridor (≤14,800 cal yr B.P.), which supports the hypothesis that initial human migration into the Americas occurred via a Pacific coastal route.

Provenance, modification and use of manganese-rich rocks at Le Moustier (Dordogne, France).

The use of colouring materials by Neanderthals has attracted a great deal of attention in recent years. Here we present a taphonomic, technological, chemical-mineralogical and functional analysis of fifty-four manganese rich lumps recovered during past and on-going excavations at the lower rockshelter of Le Moustier (Dordogne, France). We compare compositional data for archaeological specimens with the same information for twelve potential geological sources. Morphometric analysis shows that material from Peyrony's excavations before the First World War provides a highly biased picture of the importance of these materials for Mousterian groups. These early excavations almost exclusively recovered large modified pieces, while Mn-rich lumps from the on-going excavations predominantly consist of small pieces, only half of which bear traces of modification. We estimate that at least 168 pieces were not recovered during early work at the site. Neanderthals developed a dedicated technology for processing Mn-rich fragments, which involved a variety of tools and motions. Processing techniques were adapted to the size and density of the raw material, and evidence exists for the successive or alternating use of different techniques. Morphological, textural and chemical differences between geological and archaeological samples suggest that Neanderthals did not collect Mn-rich lumps at the outcrops we sampled. The association and variability in Mn, Ni, As, Ba content, compared to that observed at the sampled outcrops, suggests that either the Le Moustier lumps come from a unique source with a broad variation in composition, associating Mn, Ni, As, Ba, or that they were collected at different sources, characterized either by Mn-Ni-As or Mn-Ba. In the latter case, changes in raw material composition across the stratigraphy support the idea that Neanderthal populations bearing different stone tool technologies collected Mn fragments from different outcrops. Our results favour a use of these materials for multiple utilitarian and symbolic purposes.

Re-thinking the evolution of microblade technology in East Asia: Techno-functional understanding of the lithic assemblage from Shizitan 29 (Shanxi, China).

The lithic assemblage from Shizitan 29, a late Upper Paleolithic open-air site in Shanxi, China, provides evidence for the earliest, well-dated microblade production in East Asia, ca. 26/24 Ka cal BP. To pursue a behavioral rather than traditional typological understanding of this key adaptive technology, we apply a techno-functional approach that enables us to reconstruct the entire operational sequence in behavioral terms through the derivation of technical objectives. This methodology can serve as a model to be applied to other assemblages for greater understanding of the origins and spread of the broadly distributed eastern Asian Late Pleistocene microblade industries. Within the eight cultural layers at Shizitan 29, microblade production abruptly appears at the top of Layer 7 following earlier core-and-flake production, supporting hypotheses of microblade technology arising within adaptive strategies to worsening Late Glacial Maximum environments. Significantly, reconstruction of the operational sequence supports microblade technology being introduced into the North China Loess Plateau from regions further north. It also allows us to re-think microblades' relationship in behavioral terms with earlier limited examples of East Asian blade production and the evolution and spread of microblade technology, providing new insights into the adaptive relationships between subsequent microblade productions.

Grotta del Cavallo (Apulia-Southern Italy). The Uluzzian in the mirror.

The Uluzzian techno-complex is commonly considered to be a "transitional industry" mostly on the basis of some inferred characteristics such as a chiefly flake-based production, a small amount of Upper Palaeolithic-like tools and a combination of Middle and Upper Palaeolithic elements both in the toolkit and in the technical systems. Following its discovery, the Uluzzian was identified as the Italian counterpart of the French Châtelperronian and attributed to Neandertals. However, a study issued in 2011 has established the modern character of the two deciduous teeth found in 1964 in the Uluzzian deposit of Grotta del Cavallo, fostering renewed interests to the Uluzzian culture, which real nature is almost unknown to the international scientific community. Here we provide preliminary results of the study on the lithic assemblage from the earliest Uluzzian layer and on backed pieces from the whole Uluzzian sequence of Grotta del Cavallo (Apulia, Italy), the type site of the Uluzzian. Moreover, besides a thorough review on the stratigraphy of Grotta del Cavallo (Supplementary Materials), we provide updated information on the human remains by presenting two unpublished teeth from the reworked deposit of the same cave. We conclude that the early Uluzzians demonstrate original technological behavior and innovations devoid of any features deriving or directly linked with the late Mousterian of Southern Italy. Therefore, the novelty nature of the Uluzzian techno-complex (with respect to the preceding Mousterian) complies with the recent reassessment of the two deciduous teeth from Grotta del Cavallo in suggesting an earliest migration of modern humans in southern Europe around 45,000 years ago.

Neandertal fire-making technology inferred from microwear analysis.

Fire use appears to have been relatively common among Neandertals in the Middle Palaeolithic. However, the means by which Neandertals procured their fire-either through the collection of natural fire, or by producing it themselves using tools-is still a matter of debate. We present here the first direct artefactual evidence for regular, systematic fire production by Neandertals. From archaeological layers attributed to late Mousterian industries at multiple sites throughout France, primarily to the Mousterian of Acheulean Tradition (MTA) technoculture (ca. 50,000 years BP), we identify using microwear analysis dozens of late Middle Palaeolithic bifacial tools that exhibit macroscopic and microscopic traces suggesting repeated percussion and/or forceful abrasion with a hard mineral material. Both the locations and nature of the polish and associated striations are comparable to those obtained experimentally by obliquely percussing fragments of pyrite (FeS2) against the flat/convex sides of a biface to make fire. The striations within these discrete use zones are always oriented roughly parallel to the longitudinal axis of the tool, allowing us to rule out taphonomic origins for these traces. We therefore suggest that the occasional use of bifaces as 'strike-a-lights' was a technocultural feature shared among the late Neandertals in France.

Early Middle Palaeolithic culture in India around 385-172 ka reframes Out of Africa models.

Luminescence dating at the stratified prehistoric site of Attirampakkam, India, has shown that processes signifying the end of the Acheulian culture and the emergence of a Middle Palaeolithic culture occurred at 385 ± 64 thousand years ago (ka), much earlier than conventionally presumed for South Asia. The Middle Palaeolithic continued at Attirampakkam until 172 ± 41 ka. Chronologies of Middle Palaeolithic technologies in regions distant from Africa and Europe are crucial for testing theories about the origins and early evolution of these cultures, and for understanding their association with modern humans or archaic hominins, their links with preceding Acheulian cultures and the spread of Levallois lithic technologies. The geographic location of India and its rich Middle Palaeolithic record are ideally suited to addressing these issues, but progress has been limited by the paucity of excavated sites and hominin fossils as well as by geochronological constraints. At Attirampakkam, the gradual disuse of bifaces, the predominance of small tools, the appearance of distinctive and diverse Levallois flake and point strategies, and the blade component all highlight a notable shift away from the preceding Acheulian large-flake technologies. These findings document a process of substantial behavioural change that occurred in India at 385 ± 64 ka and establish its contemporaneity with similar processes recorded in Africa and Europe. This suggests complex interactions between local developments and ongoing global transformations. Together, these observations call for a re-evaluation of models that restrict the origins of Indian Middle Palaeolithic culture to the incidence of modern human dispersals after approximately 125 ka.

Less of a bird's song than a hard rock ensemble.

Corbey et al. (2016) propose that the Acheulean handaxe was, at least in part, under genetic control. An alternative perspective is offered here, focusing on the nature of the Acheulean handaxe and the archaeological record, and re-emphasizing their status as cultural artefacts. This is based on four main arguments challenging the proposals of Corbey et al. Firstly, handaxes do not have to track environmental variation to be a cultural artefact, given their role as a hand-held butchery knife or multi-purpose tool. Secondly, while handaxe shapes do cluster around a basic bauplan, there is also significant variability in the Acheulean handaxe record, characterized by site-specific modal forms and locally expressed, short-lived, idiosyncratic traits. Critically, this variability occurs in both time and space, is multi-scalar, and does not appear to be under genetic control. Thirdly, handaxes were produced in social contexts, within which their makers grew up exposed to the sights and sounds of artefact manufacture. Finally, the localized absences of handaxes at different times and places in the Lower Paleolithic world is suggestive of active behavioral choices and population dynamics rather than genetic controls.

Shedding light on the Early Pleistocene of TD6 (Gran Dolina, Atapuerca, Spain): The technological sequence and occupational inferences.

This paper aims to update the information available on the lithic assemblage from the entire sequence of TD6 now that the most recent excavations have been completed, and to explore possible changes in both occupational patterns and technological strategies evidenced in the unit. This is the first study to analyse the entire TD6 sequence, including subunits TD6.3 and TD6.1, which have never been studied, along with the better-known TD6.2 Homo antecessor-bearing subunit. We also present an analysis of several lithic refits found in TD6, as well as certain technical features that may help characterise the hominin occupations. The archaeo-palaeontological record from TD6 consists of 9,452 faunal remains, 443 coprolites, 1,046 lithic pieces, 170 hominin remains and 91 Celtis seeds. The characteristics of this record seem to indicate two main stages of occupation. In the oldest subunit, TD6.3, the lithic assemblage points to the light and limited hominin occupation of the cave, which does, however, grow over the course of the level. In contrast, the lithic assemblages from TD6.2 and TD6.1 are rich and varied, which may reflect Gran Dolina cave's establishment as a landmark in the region. Despite the occupational differences between the lowermost subunit and the rest of the deposit, technologically the TD6 lithic assemblage is extremely homogeneous throughout. In addition, the composition and spatial distribution of the 12 groups of lithic refits found in unit TD6, as well as the in situ nature of the assemblage demonstrate the high degree of preservation at the site. This may help clarify the nature of the Early Pleistocene hominin occupations of TD6, and raise reasonable doubt about the latest interpretations that support the ex situ character of the assemblage as a whole.

Cultural learning and the Clovis colonization of North America.

The timing of the earliest colonization of North America is debatable, but what is not at issue is the point of origin of the early colonists: Humans entered the continent from Beringia and then made their way south along or near the Pacific Coast and/or through a corridor that ran between the Cordilleran and Laurentide ice sheets in western North America. At some point, they abandoned their Arctic-based tool complex for one more adapted to an entirely different environment. That new techno-complex is termed "Clovis"; its dispersal allows us to examine, at a fine scale, how colonization processes played out across a vast continent that at the time had, at best, a very small resident population. Clovis has figured prominently in American archeology since the first Clovis points were identified in eastern New Mexico in the 1930s. However, the successful marriage of learning models grounded in evolutionary theory and modern analytical methods that began roughly a decade ago has begun to pay significant dividends in terms of what we know about the rapid spread of human groups across the last sizable landmass to witness human occupation.