Study on preparation of Qixian decoction pellets in tangential spray fluid bed / 中国中药杂志

ABSTRACT

<p><b>OBJECTIVE</b>To prepare Qixian decoction pellets.</p><p><b>METHOD</b>The formulation and technological factors influencing the preparation of Qixian decoction were investigated in tangential spray fluid bed choosing the yield of pellets, particle diameter distribution, repose angle, bulk density as inspecting indexes.</p><p><b>RESULT</b>the technological parameters for the preparation of blank pellets were as follows: the ratio of starch and dextrin was 2:1, the adhesive agent was 70% syrup, the rotating speed was 200 r x min(-1), the air blow flow was 15 x 20 L x min(-1), the rate of air flow was 15 L x min(-1), the spay air pressure was 0.15 MPa, and the rotating rate of spray solution pump was 20-50 r x min(-1); The optimized technological parameters for the preparation of Qixian decoction were as follows: the relative density of the extract was 1.12-1.15 g x min(-1), the diluent was MCC and its quantity was 8%, the rotating rate of spray solution pump was 10-12 mL x min(-1), the frequency of the rotor disc was 18-20 Hz, the atomizing pressure was 0.2 MPa, the frequency of the fan was 22 Hz, and the spheronisation and drying time was 30 mins.</p><p><b>CONCLUSION</b>the appearance of the Qixian decoction pellets prepared in tangential spray fluid bed are smoothing and round, the yield of pellets are high, and pellets of the particle size between 500-700 microm is 90.6%.</p>