RESUMEN
The application of numeric modelling for determining the impact of landfills needs for reliable emission source data. In this study, a methodology for the characterization of the emission profiles of the different sources present in landfills for emission factors determination, applying an indirect methodology, is presented. Ambient air concentrations of volatile organic compounds (VOCs), hydrogen sulphide (H2S) and ammonia (NH3) were determined in three potentially emission sources in Can Mata landfill (Hostalets de Pierola, Catalonia, Spain): dumping areas, pre-closed zone and leachate reservoir as well as in biogas, for the determination of emission factors. Multi-sorbent bed and Tenax TA tubes were used for a wide range of VOCs sampling, and analysis was conducted through TD-GC/MS. H2S and NH3 were sampled and analysed using Radiello passive samplers. The highest total VOC (TVOC) concentrations were found in dumping areas (0.7-3.5 mg m-3), followed by leachate reservoir (0.3-0.6 mg m-3) and pre-closed area (77-165 µg m-3). On the other hand, the highest H2S and NH3 concentrations were found in leachate reservoir, presenting values of 0.8-1.1 mg m-3 and 1.7-1.8 mg m-3, respectively. With the application of odour thresholds to the concentrations obtained, the most critical compounds regarding odour annoyances were determined. The highest odour units (O.U.) were found in leachate reservoir due to H2S concentrations, whereas VOCs contributed mainly to O.U. in the dumping areas. The obtained ambient air concentrations were used for the indirect determination of the emission factors through numerical modelling using a Eulerian dispersion model. The emission factors obtained for the landfill for TVOC, H2S and NH3 were in the range of 0.44-10.9 g s-1, 0.16-1.02 g s-1 and 0.23-1.82 g s-1, respectively, depending on the emission source. Reliable emission factors are crucial to obtain landfill impact maps, which are essential for the correct management of these facilities.