RESUMEN
PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT
Asunto(s)
Peróxido de Carbamida , Quitosano , Esmalte Dental , Peróxido de Hidrógeno , Blanqueadores Dentales , Blanqueamiento de Dientes , Decoloración de Dientes , Pastas de Dientes , Quitosano/farmacología , Pastas de Dientes/farmacología , Animales , Bovinos , Blanqueamiento de Dientes/métodos , Esmalte Dental/efectos de los fármacos , Blanqueadores Dentales/farmacología , Peróxido de Hidrógeno/farmacología , Peróxido de Carbamida/farmacología , Propiedades de Superficie , Fluoruros/farmacología , Color , Urea/análogos & derivados , Urea/farmacología , Café , Peróxidos/farmacologíaRESUMEN
PURPOSE: To evaluate the influence of post type and mechanical aging on compression force resistance, fracture pattern, and stress distribution in weakened roots. MATERIALS AND METHODS: Bovine roots were endodontically treated and widened-and randomly divided into 8 groups (n = 10) according to post type (prefabricated glass fiber post and customized anatomic glass fiber post, milled glass fiber post-and-core, and milled polyetheretherketone post-and-core) and mechanical aging (without and with mechanical aging). Three hundred thousand cycles of mechanical fatigue were performed and compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α = 0.05). Fracture patterns were reported and stress distribution was analyzed by finite elements analysis. RESULTS: There was a significant effect of post type (p = 0.032) and mechanical aging (p = 0.009), but no double interaction (p = 0.879). Higher values were recorded in the milled glass fiber and polyetheretherketone post-and-core groups compared to the prefabricated glass fiber post groups, and no significant difference was found among anatomic glass fiber post groups and other groups. Reparable fractures were predominant in the milled glass fiber and polyetheretherketone post-and-core groups. Prefabricated glass fiber posts and milled polyetheretherketone post-and-cores showed similar stress distribution. CONCLUSIONS: Post type and mechanical aging influence the compression force resistance and fracture pattern of weakened roots. Milled glass fiber and polyetheretherketone post-and-cores exhibited higher compression force resistance and more reparable fractures compared to prefabricated glass fiber posts. Prefabricated glass fiber posts and milled polyetheretherketone post-and-cores showed similar stress distribution.
Asunto(s)
Técnica de Perno Muñón , Fracturas de los Dientes , Diente no Vital , Animales , Bovinos , Resinas Compuestas , Materiales Dentales , Análisis del Estrés Dental , Vidrio , Ensayo de Materiales , Diente no Vital/terapiaRESUMEN
OBJECTIVE: The use of resin cements in clinical practice entails photopolymerization through prosthetic devices, which precludes light penetration. The objective of this study was to modify experimental resin cements (ERCs) with diphenyliodonium hexafluorophosphate (DPI) in an attempt to improve chemical and mechanical properties of materials cured with reduced irradiance and final radiant exposure. METHODS: A co-monomer base containing a 1:1 mass ratio of 2.2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl]propane (bis-GMA) and triethyleneglycol dimethacrylate (TEGDMA) was prepared, with 1mol% of camphorquinone and 2mol% of ethyl 4-(dimethylamino)benzoate as initiator system. The resin was divided into 4 fractions according to the DPI concentrations (0, 0.5, 1 and 2mol%). The challenging polymerization condition was simulated performing the light activation (12, 23 and 46s) through a ceramic block (3mm thick). The irradiance was assessed with a calibrated spectrometer (1320mW/cm2), resulting in three levels of radiant exposure (0.58, 1.1 and 2.2J/cm2). The polymerization kinetics was evaluated in real-time using a spectrometer (Near-IR). Water sorption and solubility was analyzed and the cohesive strength of resins obtained through the microtensile test. Polymerization stress was assessed by Bioman method. RESULTS: Resins containing DPI had higher degree of conversion and rate of polymerization than the control (without DPI). The use of DPI reduced water sorption and solubility, and led to higher cohesive strength compared to resins without the iodonium salt. However, the stress of polymerization was higher for experimental resins with DPI. SIGNIFICANCE: Even under remarkably reduced irradiance, cements containing a ternary initiating system with an iodonium salt can present an optimal degree of conversion and chemical/mechanical properties.
Asunto(s)
Metacrilatos , Cementos de Resina , Bisfenol A Glicidil Metacrilato , Resinas Compuestas , Ensayo de Materiales , PolimerizacionRESUMEN
BACKGROUND: Oral microbiota is considered as the second most complex in the human body and its dysbiosis can be responsible for oral diseases. Interactions between the microorganism communities and the host allow establishing the microbiological proles. Identifying the core microbiome is essential to predicting diseases and changes in environmental behavior from microorganisms. METHODS: Projects containing the term "SALIVA", deposited between 2014 and 2019 were recovered on the MG-RAST portal. Quality (Failed), taxonomic prediction (Unknown and Predicted), species richness (Rarefaction), and species diversity (Alpha) were analyzed according to sequencing approaches (Amplicon sequencing and Shotgun metagenomics). All data were checked for normality and homoscedasticity. Metagenomic projects were compared using the Mann-Whitney U test and Spearman's correlation. Microbiome cores were inferred by Principal Component Analysis. For all statistical tests, p < 0.05 was used. RESULTS: The study was performed with 3 projects, involving 245 Amplicon and 164 Shotgun metagenome datasets. All comparisons of variables, according to the type of sequencing, showed significant differences, except for the Predicted. In Shotgun metagenomics datasets the highest correlation was between Rarefaction and Failed (r = - 0.78) and the lowest between Alpha and Unknown (r = - 0.12). In Amplicon sequencing datasets, the variables Rarefaction and Unknown (r = 0.63) had the highest correlation and the lowest was between Alpha and Predicted (r = - 0.03). Shotgun metagenomics datasets showed a greater number of genera than Amplicon. Propionibacterium, Lactobacillus, and Prevotella were the most representative genera in Amplicon sequencing. In Shotgun metagenomics, the most representative genera were Escherichia, Chitinophaga, and Acinetobacter. CONCLUSIONS: Core of the salivary microbiome and genera diversity are dependent on the sequencing approaches. Available data suggest that Shotgun metagenomics and Amplicon sequencing have similar sensitivities to detect the taxonomic level investigated, although Shotgun metagenomics allows a deeper analysis of the microorganism diversity. Microbiome studies must consider characteristics and limitations of the sequencing approaches. Were identified 20 genera in the core of saliva microbiome, regardless of the health condition of the host. Some bacteria of the core need further study to better understand their role in the oral cavity.
Asunto(s)
Microbiota , Saliva , Bacterias/genética , Humanos , Metagenoma , Metagenómica , Microbiota/genéticaRESUMEN
In this study, we sought to evaluate the influence of cigarette smoke and pH cycling on the chemical composition and surface/cross-sectional enamel microhardness. A total of 40 dental blocks obtained from bovine incisors were divided into four groups (n=10): no treatment (control); exposure to cigarette smoke (CS); exposure to pH cycling (PC); and exposure to cigarette smoke and pH cycling (CS-PC). The samples were analyzed by synchrotron radiation micro X-ray fluorescence, bench mode X-ray fluorescence, as well as surface microhardness (SMH) and cross-sectional microhardness (CSMH) testing. The SMH results were submitted to analysis of variance (ANOVA) and Tukey's test. The CSMH results were evaluated using split-plot ANOVA and Tukey's test. A high amount of Cd and Pb and traces of Ni and As were observed in enamel and dentin after exposure to cigarette smoke (CS and CS-PC). The SMH and CSMH of CS were statistically higher when compared with the control. The PC and CS-PC showed lower SMH and CSMH. We conclude that exposure to cigarette smoke promoted heavy metal deposition in enamel/dentin. In addition, it increased the enamel microhardness but did not promote a protective effect on the in vitro development of caries. The clinical significance of this work is that there is significant bioaccumulation of heavy metals from cigarette smoke on the surface and in the enamel and dentin.
RESUMEN
The study aim was to investigate the effect of antierosive agents on enamel under normal and hyposalivatory conditions. This double-blind crossover in situ pilot study evaluated 4 toothpastes: placebo (0 ppm F), sodium fluoride (NaF, 1,450 ppm), stannous/sodium fluoride (SnF/NaF, 1,450 ppm F-, 1,090 ppm Sn2+), and sodium fluoride, stannous chloride and chitosan (NaF/Sn/Ch, 1,450 ppm F-, 3,500 ppm Sn2+, 0.5% Ch). Twenty participants were assigned to 2 groups (n = 10 each): normal and low salivary flow. Participants wore palatal appliances holding 4 bovine enamel specimens previously eroded in vitro (D1) for 20 min prior to an in situ phase after which they were eroded again (D2). Surface microhardness was determined at baseline (BL), after D1, in situ phase and D2 to assess hardness loss (%SMH), residual hardness loss (%RHL) and erosion resistance (%RER). Additional specimens were evaluated by scanning electron microscopy after the in situ phase. ANOVA and a factorial analysis for between-subject effects were performed. Sn-based toothpastes showed the best effects (p < 0.05). Under normal flow, SnF/NaF showed higher efficacy, with a significant difference compared to NaF/Sn/Ch, NaF, and placebo (p < 0.05). Under low flow, SnF/NaF and NaF/Sn/Ch were comparable (p > 0.05); NaF and placebo were statistically similar. Comparing salivary conditions, there were significant differences for SnF/NaF for %SMH after the in situ phase (%SMHtotal)), %RHL and for all toothpastes in case of %RER. Factorial analysis revealed interactions between toothpaste and saliva flow for %SMHtotal and %RHL. Salivary flow can influence the efficacy of the antierosive toothpastes; however, Sn2+ preparations show even under low salivary flow conditions the highest efficacy in the prevention of enamel erosion.
RESUMEN
In-office bleaching is a treatment based on products that contain hydrogen peroxide (HP) while demonstrating whitening effectiveness. HP could promote alterations to surface morphologies and properties of dental tissues. The objective was describe a toothpaste protocol associated to bleaching therapy to promote a safer approach. Patient 1 (male) and Patient 2 (female) were attended, and toothbrushing (twice a day) with a dentifrice containing bioactive glass (BG) (NovaMin™) and fluoride was indicated before and during the treatment. Three bleaching sessions were made in cases, at intervals of 7 days. The gels used were 35% HP (Patient 1) and 35% HP supplied with calcium (Patient 2). The effectiveness of bleaching treatment was observed in both cases (Vita scale), with an esthetic self-acceptance. Sensitivity associated with the procedure was not reported. The indication of BG-based toothpaste is relevant in relation to enamel properties and did not affect the whitening effectiveness of dental bleaching.
RESUMEN
PURPOSE: The objective of the in vitro study was to assess the effect accelerated artificial aging, bleaching agents and coffee staining on the color, gloss, roughness and microhardness of a nanocomposite. MATERIALS AND METHODS: 120 (7 × 2 mm) were prepared and randomly divided into 2 groups (n = 60) depending on the aging. Each group was further subdivided into 6 subgroups (n = 10) according to the bleaching and staining as follows: 10% carbamide peroxide (10% CP), 10% CP + staining, 35% hydrogen peroxide (35% HP), 35% HP + staining, without bleaching treatment (WB) and WB + staining. Scanning electron microscopy was performed for qualitative analysis of the resin surface. Data were submitted to 3-way analysis of variance (ANOVA) and Tukey's test for multiple comparisons. As for ∆E, multiple comparisons were performed by using Tukey's and Dunnett's tests (α = 0.05). RESULTS: The bleaching reduced significantly the microhardness of the nanocomposite in without aging groups. All physical properties were found to be negatively changed after the aging process, with bleaching treatment with 10% CP increasing significantly the roughness and loss of gloss compared to the 35% HP. Staining reduced microhardness of both with and without aging nanocomposite as well as the color of the former (E>25), a significantly different result compared to controls. CONCLUSIONS: The bleaching reduced the microhardness of the nanocomposite, whereas the aging process changed all the properties studied. The bleaching favored extrinsic staining of the with aging nanocomposite.
Asunto(s)
Café/química , Peróxido de Hidrógeno/química , Nanocompuestos/química , Peróxidos/química , Urea/análogos & derivados , Peróxido de Carbamida , Nanocompuestos/ultraestructura , Propiedades de Superficie , Factores de Tiempo , Urea/químicaRESUMEN
BACKGROUND: Enamel microabrasion is an esthetic treatment for removing superficial stains or defects of enamel. AIM: This study evaluated the roughness after enamel microabrasion using experimental microabrasive systems. MATERIALS AND METHODS: One hundred and ten samples (5 × 5 mm) were obtained from bovine incisors and divided into 11 groups (n = 10) in accordance with the treatment: Microabrasion using 6.6% hydrochloric acid (HCl) or 35% phosphoric acid (H3PO4) associated with aluminum oxide (AlO3) or pumice (Pum) with active application (using rubber cup coupled with a micro-motor of low rotation) or passive application (just placing the mixture on the enamel surface); just the use of acids in a passive application (negative control), and a group without treatment (positive control). Roughness analysis was performed before and after treatments. The statistical analysis used analysis of variance (PROC MIXED), Tukey-Kramer and Dunnet tests (P < 0.05). Representative specimens were evaluated using scanning electron microscopy (SEM). RESULTS: There was no significant difference between the acids used (P = 0.0510) and the applications (P = 0.8989). All of the treated groups were statistically different from the positive control. When using passive application, the use of HCl + AlO3 resulted in higher roughness when compared with HCl + Pum. Additionally, this treatment was statistically different from the passive application of H3PO4 (negative control) (P < 0.05). However, SEM analysis showed that the treatment with AlO3 resulted in an enamel surface with a more polished aspect when compared with Pum. CONCLUSION: AlO3 may be a suitable particle for use in microabrasive systems.
RESUMEN
AIM: In the present study, we evaluated the efficacy of bleaching on enamel and opposite dentin surfaces using 35% hydrogen peroxide (HP) with the prior application of a desensitizing agent. METHODS: Thirty bovine dental fragments, with thicknesses of 1 mm enamel and 1.75 mm dentin, were stained in a solution of black tea. The fragments were randomly divided into three groups (n = 10) according to the following protocols: (a) 2% neutral fluoride + bleaching; (b) desensitizing agent + bleaching; and (c) without desensitizer + bleaching. The bleaching efficacy was evaluated four times: after staining with tea (baseline) and after each of the 3 weeks of bleaching, by means of the CIE Lab method using a reflectance spectrophotometer. The data coordinate L* was evaluated by an analysis of repeated measures with PROC MIXED and Tukey-Kramer's test. The ΔE values were subjected to anova and Tukey's test (α = 0.05). RESULTS: The 35% HP treatment showed greater efficacy on deep dentin after removal of the enamel stains, with increasing means during all times in all treatments. CONCLUSION: The use of a desensitizing agent prior to the bleaching session did not affect the mechanism of action of 35% HP with regard to tooth depth.
Asunto(s)
Esmalte Dental/efectos de los fármacos , Desensibilizantes Dentinarios/uso terapéutico , Dentina/efectos de los fármacos , Peróxido de Hidrógeno/uso terapéutico , Blanqueadores Dentales/uso terapéutico , Blanqueamiento de Dientes/métodos , Animales , Bovinos , Color , Esmalte Dental/ultraestructura , Fluoruros/uso terapéutico , Microscopía Electrónica de Rastreo , Nitratos/uso terapéutico , Compuestos de Potasio/uso terapéutico , Distribución Aleatoria , Fluoruro de Sodio/uso terapéutico , Espectrofotometría/métodos , Té , Factores de Tiempo , Decoloración de Dientes/tratamiento farmacológicoRESUMEN
AIM: In the present study, we evaluated the influence of the photo-curing delay time and energy density on the degree of conversion and the Knoop microhardness of a resin cement. METHODS: Seventy-eight samples were assigned to 13 groups (n = 6), one of which received no light curing (control). The samples were made of a dual-cured resin cement (RelyX ARC) with the aid of a Teflon matrix, submitted to one of the following energy densities (J/cm²): 7, 14, 20, and 28. Delay times were immediate (0), 1 min, or 2 min. After 24 h, the degree of conversion and microhardness were measured at three segments: cervical, medium, and apical. Data were submitted to three-way anova and Tukey's and Dunnett's tests, the latest of which was used to compare the control to the experimental groups. RESULTS: No interaction was observed between delay time and energy density regarding the degree of conversion. The cervical segment showed the highest values, while the apical showed the lowest. Microhardness values concerning the cervical segment in all groups were statistically different from that obtained for the control. CONCLUSION: A high-irradiance light-curing unit allows for a reduced irradiation exposure time with a short delay time, aimed at tooth restorations using a dual-cured resin cement.
Asunto(s)
Cementos de Resina/química , Bisfenol A Glicidil Metacrilato/química , Luces de Curación Dental , Dureza , Humanos , Curación por Luz de Adhesivos Dentales/métodos , Ensayo de Materiales , Polietilenglicoles/química , Polimerizacion , Ácidos Polimetacrílicos/química , Dosis de Radiación , Auto-Curación de Resinas Dentales/métodos , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Factores de TiempoRESUMEN
The aim of this study was to evaluate the degree of conversion (DC) and to identify the viscoelastic properties: storage modulus (E'), loss modulus (E"), tangent delta (tan δ), and glass transition temperature (T g ) of a microhybrid resin-composite light-activated by three different protocols. A Filtek Z250 (3 M ESPE) shade A3 was inserted in a Teflon mold (21 mm × 5 mm × 1 mm for viscoelastic properties; and 5 mm × 1 mm for DC) and light-activated according to the following light-activation protocols: (S) 1,000 mW/cm(2) × 19 s, (HP) 1,400 mW/cm(2) × 14 s, and (PE) 3,200 mW/cm(2) × 6 s, all set up to deliver 19 J/cm(2). Viscoelastic properties was assessed by dynamic mechanical analysis (DMA) (n = 3), performed in single cantilever clamped mode. DC (n = 5) was measured by FTIR on top (T) and bottom (B) surfaces, and the data was submitted to a split-plot one-way ANOVA. For DC, there was a significant effect for surface factor and light-activation protocols factor. Top surface showed higher DC than B in all experimental conditions. Light-activation protocols S and HP resulted in higher DC than PE and were similar between them. Viscoelastic properties (E', E", tan δ, T g ) were not affected by light-activation protocols. It could be concluded that light-activation protocols influenced DC but not influenced the viscoelastic properties.
Asunto(s)
Resinas Compuestas/química , Ácidos Polimetacrílicos/química , Módulo de Elasticidad , Luz , Ensayo de Materiales , Procesos Fotoquímicos , Temperatura de Transición , ViscosidadRESUMEN
AIM: The aim of the present study was to evaluate the microleakage in class II cavities restored with dental composite by varying the thickness of two flowable composite resins and the restorative technique. METHODS: A total of 130 cavities were prepared on proximal surfaces of bovine teeth and randomly divided in 13 groups. Twelve experimental groups were performed using flowable composite resin as the liner, and they were divided according to the type of flowable composite resin (Filtek Z350 Flow-Z350F and SureFil SDR Flow-SUR), the thickness of the flowable composite (0.5, 1, or 2 mm), and the restorative technique (flowable composite applied at the cavosurface angle or amelodentinal junction) (n = 10). A control group was performed without using a flowable composite. Following restorative procedures and thermocycling, the samples were immersed in Methylene Blue for 2 h, and prepared for analysis in an absorbance spectrophotometer. All results were statistically analyzed (α = 0.05). RESULTS: There was no significant difference between the flowable composites (P > 0.05). The restorative techniques influenced microleakage and were flowable composite dependent (P ≤ 0.05). The lower thickness of the flowable composite provided less microleakage (P ≤ 0.05). CONCLUSION: The use a lower thickness of a flowable composite resin provided less microleakage, suggesting a better sealing tooth-restoration interface.
Asunto(s)
Resinas Compuestas/química , Filtración Dental/clasificación , Materiales Dentales/química , Restauración Dental Permanente/métodos , Grabado Ácido Dental/métodos , Animales , Bovinos , Colorantes , Recubrimiento de la Cavidad Dental/métodos , Preparación de la Cavidad Dental/clasificación , Esmalte Dental/ultraestructura , Restauración Dental Permanente/clasificación , Dentina/ultraestructura , Ensayo de Materiales , Azul de Metileno , Distribución Aleatoria , Espectrofotometría/instrumentación , Propiedades de Superficie , Temperatura , Factores de Tiempo , ViscosidadRESUMEN
AIM: To quantify the microleakage on restorations carried out with a two-step etch-and-rise adhesive system and nanofilled composite resin after thermal and mechanical loading cycling. METHODS: Ninety cavities were prepared on proximal surfaces of incisive teeth, and were randomly divided according to the photoactivation time (10, 20, or 30 s) and light-curing mode (Quartz Tungsten Halogen (QTH) lamps, 450 mW/cm(2); Light Emitting Diode (LED) second generation, 1100 mW/cm(2); or LED third generation, 700 mW/cm(2)) of an adhesive system (n = 10). Following restorative procedures and thermal and mechanical loading cycling, the samples were immersed in Methylene Blue for 2 h. The samples were ground, and the powder was prepared for analysis in an absorbance spectrophotometer. All results were statistically analyzed by anova and Tukey's test at the 5% level of significance. RESULTS: There were no significant statistical difference in microleakage between the light-curing mode (P = 0.1212) and light-curing time (P = 0.2043). CONCLUSION: Different curing modes and increasing the curing time were not factors that influenced the process of microleakage.
Asunto(s)
Resinas Compuestas/química , Cementos Dentales/química , Filtración Dental/clasificación , Materiales Dentales/química , Restauración Dental Permanente/métodos , Grabado Ácido Dental/métodos , Animales , Bovinos , Colorantes , Luces de Curación Dental/clasificación , Preparación de la Cavidad Dental/clasificación , Restauración Dental Permanente/clasificación , Ensayo de Materiales , Azul de Metileno , Nanocompuestos/química , Ácidos Fosfóricos/química , Polimerizacion , Distribución Aleatoria , Espectrofotometría/instrumentación , Estrés Mecánico , Temperatura , Factores de Tiempo , Agua/químicaRESUMEN
OBJECTIVES: This study evaluated the effectiveness of low- and high-concentration bleaching agents on enamel and deep dentin. STUDY DESIGN: Stained bovine incisors fragments were randomized placed into 10 groups (n=5), according to the sample thicknesses (2.0 mm or 3.5 mm) and bleaching agent: 10% carbamide peroxide (CP) (4 h a day/21 days); 6% hydrogen peroxide (HP) with calcium (1:30 h a day/21 days); HP 20% with calcium (50 min a day/3 sessions with a 7-day interval); HP 35% (3 x 15 min a day/3 sessions with a 7-day interval); HP 35% with calcium (40 min a day/3 sessions with a 7-day interval). The samples were stored in artificial saliva during the experiment. The color change was evaluated using a spectrophotometer at the initial analysis, after artificially staining with black tea and after each of the bleaching weeks, and data was expressed in CIE Lab System values. The L* coordinate data was submitted to analysis of variance and Tukey-Kramer test and the ?E values data was submitted for analysis of variance in a split-plot ANOVA and Tukey's test (?=0.05). RESULTS: None of the bleaching agents tested differed from the reflectance values on the enamel surface. For deep dentin HP 20% and HP 35%, both with calcium, showed the lowest reflectance values, which differed from CP 10%. CONCLUSION: It is concluded that high concentration hydrogen peroxide with calcium was less effective in deep dentin than 10% carbamide peroxide. Key words:Dental bleaching; hydrogen peroxide; carbamide peroxide; dental staining.
RESUMEN
This study evaluated the effect of adhesive application only to enamel on the marginal microleakage of composite resin restorations performed with different adhesive systems. Standardized cylinder-shaped cavities were prepared on the buccal surface of eighty bovine incisors. Two etch-and-rinse (Adper Scotchbond Multi-purpose [3M ESPE, St. Paul, MN USA] and Adper Single Bond 2 [3M ESPE]) and two self-etching (Clearfil SE Bond [Kuraray, Osaka, Japan] and Adper Prompt [3M ESPE]) adhesive systems were evaluated. The adhesives were applied only to enamel or to both dentin and enamel. After adhesive light-activation, the cavities were restored with composite resin. The samples were coated with two layers of nail polish, except an area of 1-mm wide around of the restoration, and immersed in a methylene blue solution. Afterwards, the specimens were ground in order to obtain powder which was immersed in absolute alcohol. The solutions were centrifuged and the supernatant was analyzed using an absorbance spectrophotometer. Linear regression was used to estimate the dye concentration. Data were analyzed using ANOVA and Tukey's tests (alpha = 0.05). The etch-and-rinse adhesives showed lower microleakage means compared to those of the self-etching adhesives. Adper Prompt presented higher microleakage means. There was no difference between the modes of application of the adhesive on the cavity for all adhesive systems, except for Clearfil SE Bond. This showed lower microleakage when applied to the whole cavity. Bonding to dentin may not reduce microleakage of composite restorations.
Asunto(s)
Resinas Compuestas , Recubrimiento Dental Adhesivo , Filtración Dental/prevención & control , Restauración Dental Permanente , Recubrimientos Dentinarios , Animales , Bovinos , Técnicas In VitroRESUMEN
Physical properties such as surface hardness of dental materials are directly linked to their clinical behavior. The aim of this study was to investigate the influence of extended curing time on the polymerization depth offluoride-containing materials used as pit and fissure sealants. Conventional and extended exposure times (20 and 60 seconds) were used to photoactivate a gold-standard pit and fissure sealant (Fluroshield, Dentsply) and a flowable composite (PermaFlo, Ultradent). Twenty square-shaped samples (n=5) were prepared using a LED device (Bluephase 16i, Ivoclar). The Knoop Hardness Number (KHN) was calculated for the top and bottom surface of each sample 24 hours after polymerization. Bottom/top hardness ratio (B/T KHN) was than calculated. Averages were analyzed by two-way ANOVA and Tukey test (alpha=0.05). The flowable composite had higher KHN than conventional pit and fissure sealant for all experimental conditions (p<0.05). The 60-second photoactivation time increased KHN at the bottom surface and B/T KHN only of composite specimens. The flowable composite had better physical properties than the pit and fissure sealant, and they were improved by extended curing time.
Asunto(s)
Selladores de Fosas y Fisuras/efectos de la radiación , Polimerizacion/efectos de la radiación , Fluoruros , Pruebas de Dureza , Ensayo de Materiales , Factores de TiempoRESUMEN
OBJECTIVES: The aim of this in vitro study was to evaluate the microhardness and diametral tensile strength of a hybrid composite resin (Z250, 3M ESPE) polymerized with four different modes of light exposure and immersed in two different media. METHODS: Composite resin specimens were randomly polymerized according to the experimental groups (conventional, 550 mW/cm(2)/30 s; soft start, 300 mW/cm(2)/10 s + 550 mW/cm(2)/20 s; high intensity, 1060 mW/cm(2)/10 s; pulse delay, 550 mW/cm(2)/1 s + 60 s of waiting time + 550 mW/cm(2)/20 s) and immersed in one of two media (distilled water or absolute ethanol) for 24 h. After that, microhardness (M) and diametral tensile strength (DTS) tests were performed. RESULTS: For DTS, there were no statistical differences among the polymerization modes, however, ethanol medium groups presented statistically lower DTS (p < 0.05) than water medium. For the M test, samples immersed in ethanol medium presented lower M for almost all groups. Conventional mode presented higher M values for the groups immersed in water medium. In ethanol medium, conventional and pulse delay groups presented higher M values, statistically different (p < 0.05) from the high intensity group. For all experimental conditions, the top surface showed higher M than the bottom surface. SIGNIFICANCE: Different polymerization modes can be related to the different polymer structures formed, and consequently with different physical properties of resin composite. The immersion media can alter the physical properties of resin composites of different polymer structures.