Anticancer effect of zinc oxide nanoparticles prepared by varying entry time of ion carriers against A431 skin cancer cells in vitro.

Although, zinc oxide nanoparticles (ZRTs) as an anti-cancer agent have been the subject of numerous studies, none of the reports has investigated the impact of the reaction entry time of ion-carriers on the preparation of ZRTs. Therefore, we synthesized variants of ZRTs by extending the entry time of NaOH (that acts as a carrier of hydroxyl ions) in the reaction mixture. The anti-proliferative action, morphological changes, reactive oxygen species (ROS) production, and nuclear apoptosis of ZRTs on human A431 skin carcinoma cells were observed. The samples revealed crystallinity and purity by X-ray diffraction (XRD). Scanning electron microscopy (SEM) images of ZRT-1 (5 min ion carrier entry) and ZRT-2 (10 min ion carrier entry) revealed microtubule like morphology. On prolonging the entry time for ion carrier (NaOH) introduction in the reaction mixture, a relative ascent in the aspect ratio was seen. The typical ZnO band with a slight shift in the absorption maxima was evident with UV-visible spectroscopy. Both ZRT-1 and ZRT-2 exhibited non-toxic behavior as evident by RBC lysis assay. Additionally, ZRT-2 showed better anti-cancer potential against A431 cells as seen by MTT assay, ROS generation and chromatin condensation analyses. At 25 µM of ZRT-2, 5.56% cells were viable in MTT test, ROS production was enhanced to 166.71%, while 33.0% of apoptotic cells were observed. The IC50 for ZRT-2 was slightly lower (6 µM) than that for ZRT-1 (8 µM) against A431 cells. In conclusion, this paper presents a modest, economical procedure to generate ZRT nano-structures exhibiting strong cytotoxicity against the A431 cell line, indicating that ZRTs may have application in combating cancer.

ZnS Quantum Dots Decorated on One-Dimensional Scaffold of MWCNT/PANI Conducting Nanocomposite as an Anode for Enzymatic Biofuel Cell.

This study aims to design a new nanocomposite as a supporting material for wiring the enzyme to develop a bioanode in the enzymatic biofuel cell (EBFC). In this work, polyaniline-based nanocomposite was synthesized by in situ polymerization of aniline monomer. The zeta potential study of the nanofillers was carried out, which reveals the interaction between the nanofillers. The synthesized nanocomposite (MWCNT/ZnS/AgNWs/PANI) was characterized by analytical techniques, such as Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction spectroscopy (XRD). Furthermore, the surface morphology and the in-depth information of the synthesized nanocomposite were displayed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. In addition, the as-synthesized nanocomposite and the designed bioanode underwent the electrochemical assessment using different electrochemical techniques such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV) for evaluating the electrochemical behavior of the fabricated anodes. The electrochemically regulated bioanode (MWCNT/ZnS/AgNWs/PANI/Frt/GOx) obtained an open-circuit voltage of 0.55 V and produced a maximal current density of 7.6 mA cm-2 at a glucose concentration of 50 mM prepared in phosphate buffer solution (PBS) (pH 7.0) as a supporting electrolyte at a scan rate of 100 mV s-1.

Anti-quorum Sensing and Anti-biofilm Activity of Zinc Oxide Nanospikes.

This study evaluates the impact of two separate incubation periods (4 and 6 weeks) on the morphology of sol-gel-fabricated ZnO nanospikes (ZNs), that is, ZN1 and ZN2, respectively. We further analyzed the inhibitory effects of ZN1 and ZN2 on quorum sensing (QS) and biofilm formation in Pseudomonas aeruginosa (PAO1) and Chromobacterium violaceum (strains 12472 and CVO26). The size of the synthesized ZNs was in the range of 40-130 nm, and finer nanoparticles were synthesized after an incubation period of 6 weeks. Treatment with ZNs decreased the production of violacein in the pathogen without affecting the bacterial growth, which indicated that ZNs inhibited the QS signaling regulated by N-acyl homoserine lactone. ZN2 had a higher inhibitory action on the virulence factor productivity than ZN1. Furthermore, ZN2-treated cells displayed a substantial decrease in azocasein-degrading protease activity (80%), elastase activity (83%), and pyocyanin production (85%) relative to untreated P. aeruginosa PAO1 cells. Treatment with ZN2 decreased swarming motility and exopolysaccharide production by 89 and 85%, respectively. ZN2 was effective against both the las & pqs systems of P. aeruginosa and exhibited broad-spectrum activity. Additionally, ZN2 was more efficient in inhibiting the biofilm formation at the attachment stage than ZN1. These findings revealed that in P. aeruginosa, ZN2 demonstrated inhibitory effects on QS as well as on the development of biofilms. Thus, ZN2 can be potentially used to treat drug-resistant P. aeruginosa infections.

A Mini Review on Organic Chemosensors for Cation Recognition (2013-19).

Colorimetric and ratiometric fluorescent probe for cations gain very well attention by the chemist, biologist and environmentalist. Metals has two sides, first is biolgical active for living creature and toxic nature for the ecosystem. From last three decades the scientists are contiously trying to find out the best solution for the detection of cations at micro as well as nanomolar levels. In the present review we discussed the colorimetric and ratiometric fluorescent probe synthesized by the authors in almost half decade.

Kraton based polymeric nanocomposite bioanode for the application in a biofuel cell.

The objective of this work is to introduce a nanocomposite based bioanode for biofuel cell application. The as-prepared Kraton/MWCNTs nanocomposite was used as a current enhancer and ferritin (Frt) as a mediator between glucose oxidase (GOx) and the electrode surface. The hybrid anode achieved enzymatic oxidation of glucose by the nanocomposite reflecting an efficient energy conversion from glucose. The resulting Kraton/MWCNTs/Frt/GOx bioande exhibited good catalytic activity towards glucose oxidation along with excellent stability. The maximum current density attained by the bioanode is 1.14 mA cm-2 at the optimum glucose concentration of 60 mM. This enzymatic strategy can be employed to develop other polysaccharide or oligosaccharide fuel cells in which glucose oxidation is involved.

Synthesis and characterization of polylactide/rice husk hydrochar composite.

Polymer composites are fabricated by incorporating fillers into a polymer matrix. The intent for addition of fillers is to improve the physical, mechanical, chemical and rheological properties of the composite. This study reports on a unique polymer composite using hydrochar, synthesised by microwave-assisted hydrothermal carbonization of rice husk, as filler in polylactide matrix. The polylactide/hydrochar composites were fabricated by incorporating hydrochar in polylactide at 5%, 10%, 15% and 20 wt% by melt processing in a Haake rheomix at 170 °C. Both the neat polylactide and polylactide/hydrochar composite were characterized for mechanical, structural, thermal and rheological properties. The tensile modulus of polylactide/hydrochar composites was improved from 2.63 GPa (neat polylactide) to 3.16 GPa, 3.33 GPa, 3.54 GPa, and 4.24 GPa after blending with hydrochar at 5%, 10%, 15%, and 20%, respectively. Further, the incorporation of hydrochar had little effect on storage modulus (G') and loss modulus (G″). The findings of this study reported that addition of hydrochar improves some characteristics of polylactide composites suggesting the potential of hydrochar as filler for polymer/hydrochar composites.