The effectiveness of Moringa oleifera in the preservation of periodontium after radiation therapy: An experimental animal study.

Background: Radiation therapy produces reactive oxygen species, which have been linked to various degenerative conditions in periodontal attachment. This study aimed to assess the beneficial effects of aqueous Moringa oleifera leaf extract on the periodontium of albino rats exposed to fractionated gamma radiation. Materials and methods: This experimental study involved 24 adult male albino rats divided into three groups: Group M received M. oleifera leaf extract (300 mg/kg) intraperitoneally for 14 days; Group R received 20 Gy fractionated gamma irradiation; and Group MR received the same M. oleifera regimen as Group M and then fractionated gamma irradiation dose as Group R. On the first and seventh days post-radiation, bone, cementum, and periodontal ligament samples were histologically and histomorphometrically examined. Results: The periodontal ligament, alveolar bone, and cementum showed structural damage in Group R. A relative persistence of normal periodontal tissue structures was seen in Group MR, showing less disruption of the periodontal ligament and greater trabecular bone thickness than Group R. The histomorphometric analysis showed that the mean periodontal ligament width was highest in Group R7 (245.20 µm) and lowest in Group M7 (54.55 µm). In addition, the mean cementum width was highest in Group R1 (88.99 µm) and lowest in Group M1R1 (17.87 µm) and differed significantly between groups. Conclusion: Within the limitations of this study, Moringa oleifera leaf aqueous extract showed the potential to reduce the adverse effects of radiation, control inflammation, and support tissue healing in a rat model.

Efficient photocatalytic remediation of lerui acid brilliant blue dye using radiation- prepared carboxymethyl cellulose/acrylic acid hydrogel supported by ZnO@Ag.

Organic dye pollution from textiles and other industries presents a substantial risk to people and aquatic life. The use of photocatalysis to decolorize water using the strength of UV light is one of the most important remediation techniques. In the present study, a novel nanocomposites hydrogel including carboxymethyl cellulose (CMC), acrylic acid (AAc), Zinc oxide (ZnO), and silver (Ag) nanoparticles was produced using an eco-friendly γ-irradiation technique for photocatalytic decolorization applications. ZnO and Ag nanoparticles were distributed in the CMC/AAc hydrogel matrix without significant aggregation. SEM, XRD, EDX, TEM, and FTIR analyses were used to assess the physicochemical characteristics of the nanocomposite samples. Carboxymethyl cellulose/acrylic acid/Zinc oxide doped silver (CMC/PAAc/ZnO@Ag) nanocomposite hydrogels were developed and utilized in the photocatalytic decolorization of the lerui acid brilliant blue dye (LABB) when exposed to ultraviolet (UV) radiation. UV- Vis spectrophotometry was utilized to analyze the optical properties of the produced nanostructure. Regarding the decolorization of the LABB, the impacts of operational variables were investigated. The optimum conditions for decolorization (93 %) were an initial concentration of 50 mg/L, pH = 4, catalyst dosage of 50 g/L, and exposure time of 90 min. The results illustrated that the LABB acidic dye from wastewater was remarkably decolored.

E-beam irradiation-induced synthesis of hydroxyethyl cellulose/(Cu2O-rGO)/BiVO4-based nanocomposite for photocatalytic remediation of wastewater under visible light.

Using E-beam irradiation as an eco-friendly technique for initiation and crosslinking, a series of Hydroxyethyl Cellulose-poly vinyl alcohol copolymer hydrogels were synthesized as templates for cuprous oxide (Cu2O), reduced graphene oxide (rGO) and bismuth vanadate (BiVO4) nanoparticles to be used as nanocomposites photocatalysts for methylene blue (MB) dye decolorization using visible light. Preparation conditions were optimized to ensure the construction of a good network architecture and therefore the highest gelation degree. For the preparation of (Cu2O@rGO)/BiVO4 nanocomposites, a series of rGO was decorated by Cu2O using the precipitation method, followed by mixing with BiVO4 which was synthesized hydrothermally. (EDX), (XRD), (TEM), and (SEM) were used for nanoparticle characterization. The thermal characteristics of the fabricated nanocomposites were evaluated using thermal gravimetric analysis. The presence of rGO enhanced the decolorization efficiency of MB about 20 % higher than that of (HEC-PVA)/Cu2O which achieves only (59 %) decolorization efficiency. After the addition of BiVO4 NPs, the decolorization efficiency increased to reach 90 % after 150 min at pH 11 using a 10 ppm MB solution. The developed (HEC-PVA)/(Cu2O@rGO)/BiVO4 photocatalyst exhibits efficient reusability for 5 cycles. Treated dyed water shows a germination index (GI) of 82 % suggesting its suitability for irrigation of playgrounds and gardens.

Radiation synthesis and photocatalytic performance of floated graphene oxide decorated ZnO/ alginate-based beads for methylene blue degradation under visible light irradiation.

Organic dye contamination, emanating from pharmaceutical, paper, and textile industries into water resources, severely threatens marine and human life even at low concentrations. Photocatalysis is one of the most important remediation techniques that decolorize water by employing the power of light. In this work, the development of floated beads of Sodium Alginate/hydroxyethyl methacrylate (Alg-g-HEMA) encompass graphene oxide (GO) decorated Zinc oxide (ZnO) utilizing ionizing radiation was designed to function as a photocatalyst when exposed to visible light. Floatability was induced using calcium carbonate. GO was sonochemically decorated with ZnO nanoparticles and the yield was characterized using XRD, FTIR, TEM, SEM, and EDX techniques. Optical characteristics of the developed nanostructure were performed using UV-Vis spectrophotometry. The photocatalytic activity of the floated (Alg-g-HEMA)-ZnO@GO beads was assessed for the photo decolorization of methylene blue dye (MB) under visible light. The upshot of operational factors such as photocatalyst dose, pH, initial dye concentration, and irradiation time on the decolorization of MB was examined. It was observed that 1 g of the developed (Alg-g-HEMA)-ZnO@GO photocatalyst was able to decolorize 1000 ml of 20 ppm of MB within 150 min at pH 9. In terms of kinetics, photo-decolorization follows Langmuir Hinshelwood pseudo-first order.