Polarization insensitive split square ring resonator based epsilon-negative and near zero refractive index metamaterial for S, C, and X frequency bands satellite and radar communications.

This study has investigated the impact of inverse G-like shape resonators that exhibited epsilon negative (ENG) and near-zero refractive index (NZI) properties for multi-band wireless communications applications. The electrical measurement of structure is 0.118λ × 0.118λ × 0.021 λ, which is calculated at 3.94 GHz. FR-4 is used as a substrate layer, and the resonator is designed on it. This structure is manifested in the ENG and NZI characteristics within the frequency range of 3.8-4.17, 7.68-8.54, 10.67-11.36 GHz, and 4.07-4.15 and 8.29-8.37 GHz, respectively. This study also manifests the polarization insensitivity nature of 0°-90°, and the incident angle is investigated up to 60° for both TE and TM modes. The proposed structure achieves triple resonance at 3.94 GHz, 8.08 GHz, and 11.17 GHz, respectively, included in the S, C, and X frequency bands. The CST Microwave Studio 2019 software is conducted to design, develop, perform analysis, investigate electromagnetic properties, and extract effective medium parameters. The Advanced Design Software (ADS) is used to model the equivalent circuit of the unit cell. The simulated, measured, and ADS results verified the scattering parameter performance. The EMR value of the structure is 8.47, indicating the structure's compactness. The compact design with simplicity, ENG, and NZI properties make the proposed structure significant for microwave application, mainly to enhance the antenna bandwidth and gain filter design. ENG and NZI properties the operation frequency stability and efficiency for low earth orbit nanosatellite communications.

Polarization Independent Metamaterial Absorber with Anti-Reflection Coating Nanoarchitectonics for Visible and Infrared Window Applications.

The visible and infrared wavelengths are the most frequently used electromagnetic (EM) waves in the frequency spectrum; able to penetrate the atmosphere and reach Earth's surface. These wavelengths have attracted much attention in solar energy harvesting; thermography; and infrared imaging applications for the detection of electrical failures; faults; or thermal leakage hot spots and inspection of tapped live energized components. This paper presents a numerical analysis of a compact cubic cross-shaped four-layer metamaterial absorber (MA) structure by using a simple metal-dielectric-metal-dielectric configuration for wideband visible and infrared applications. The proposed MA achieved above 80% absorption in both visible and near-infrared regions of the spectrum from 350 to 1250 nm wavelength with an overall unit cell size of 0.57λ × 0.57λ × 0.59λ. The SiO2 based anti-reflection coating of sandwiched tungsten facilitates to achieve the wide high absorption bandwidth. The perceptible novelty of the proposed metamaterial is to achieve an average absorptivity of 95.3% for both visible and infrared wavelengths with a maximum absorptivity of 98% from 400 nm to 900 nm. Furthermore, the proposed structure provides polarization insensitivity with a higher oblique incidence angle tolerance up to 45°.

Gap coupled symmetric split ring resonator based near zero index ENG metamaterial for gain improvement of monopole antenna.

In this article, a symmetric split ring resonator (SRR) based metamaterial (MTM) is presented that exhibits three resonances of transmission coefficient (S21) covering S, C, and X-bands with epsilon negative (ENG) and near zero index properties. The proposed MTM is designed on an FR4 substrate with the copper resonator at one side formed with two square rings and one circular split ring. The two square rings are coupled together around the split gap of the outer ring, whereas two split semicircles are also coupled together near the split gaps. Thus, gap coupled symmetric SRR is formed, which helps to obtain resonances at 2.78 GHz, 7.7 GHz and 10.16 GHz with desired properties of the MTM unit cell. The MTM unit cell's symmetric nature helps reduce the mutual coupling effect among the array elements. Thus, different array of unit cells provides a similar response to the unit cell compared with numerical simulation performed in CST microwave studio and validated by measurement. The equivalent circuit is modelled for the proposed MTM unit cell in Advanced Design System (ADS) software, and circuit validation is accomplished by comparing S21 obtained in ADS with the same of CST. The effective medium ratio (EMR) of 10.7 indicates the compactness of the proposed MTM. A test antenna is designed to observe the effect of the MTM over it. Numerical analysis shows that the proposed MTM have an impact on the antenna when it is used as the superstrate and helps to increase the gain of the antenna by 95% with increased directivity. Thus, compact size, high EMR, negative permittivity, near zero permeability and refractive index makes this MTM suitable for S, C and X band applications, especially for antenna gain with directivity enhancement.

Polarization insensitive dual band metamaterial with absorptance for 5G sub-6 GHz applications.

A couple ring enclosed circular geometric resonator (CRECGR) based dual-band polarization insensitive metamaterial (MM) with high effective medium ratio (EMR), and excellent absorptance is proposed in this study, which can be utilized as a sensor and absorber in the 5G sub-6 GHz frequency range. A circular geometry-based unique patch has been introduced in the proposed unit cell to achieve high polarization insensitive properties with excellent absorption for the 5G sub-6 GHz spectrum. The distinctive feature of this proposed CRECGR unit cell is its simple and unique structure with a high EMR of 11.13, polarization insensitive up to 180°, and epsilon negative (ENG) properties, including a negative refractive index and near-zero permeability for 5G sub-6 GHz applications. Furthermore, this designed unit cell yields excellent absorption properties with high quality factor. The designed MM unit cell is fabricated on low loss Rogers RT5880 printed media with an electrical dimension of 0.089λ × 0.089λ × 0.017λ. The performance of the designed CRECGR metamaterial is determined using Computer Simulation Technology (CST), Advanced Design Software (ADS), and measurements. The CRECGR unit cell offers dual resonances at 3.37 GHz and 5.8 GHz, covering the 5G sub-6 GHz band with ENG, near-zero permeability and negative index. The polarization insensitive properties of the unit cell were also investigated for maximum angle of incidence, which confirmed the identical response. The simulated outcome is verified by experiment with excellent accordance. Moreover, the unit cell performance with a complete backplane is explored, noting a maximum absorption of 99.9% for all normal and oblique incidence waves, suitable for sensing and antenna systems. In addition, the suggested unit cell sensing performance is evaluated using the permittivity-based sensing model. The proposed MM outperforms recent related studies in terms of polarization insensitivity up to 180°, high insensitive absorptivity, high EMR, and sensing applications. These features prove that the proposed CRECGR metamaterial is perfect for 5G Applications.

Metamaterial sensor based on rectangular enclosed adjacent triple circle split ring resonator with good quality factor for microwave sensing application.

In this article, a novel shaped metamaterial sensor is presented for the recognition of various oils, fluids, and chemicals using microwave frequency. The performance of the designed sensor structure has been studied both theoretically and experimentally, and it works well. A new sample holder for convenient operation is created and located just behind the designed structure. The results of this study performed better than those of prior liquids sensing studies. Various designs were explored using the Genetic Algorithm (GA), and it is embedded in the Computer Simulation Technology (CST) microwave studio, to optimize the optimal dimensions of the resonator. The suggested metamaterial sensor has a good-quality factor and sensitivity in both frequency shifting and amplitude changing. The resonance frequency shifted to 100 MHz between olive and corn oils, 70 MHz between sunflower and palm oils, 80 MHz between clean and waste brake fluids, and 90 MHz between benzene and carbon-tetrachloride chemicals. The quality factor of the sensor is 135, sensitivity is 0.56, and the figure of merit is 76 which expresses its efficient performance. Furthermore, the proposed sensor can sensitively distinguish different liquids by using the frequency shifting property. The study was carried out in three stages: dielectric constant (DK) measurement with the N1500A dielectric measurement kit, simulation of the structure, and experimental test study with the vector network analyzer. Since the recommended sensor has high sensitivity, good quality factor, and excellent performance, hence it can be used in chemical, oil, and microfluidic industries for detecting various liquid samples.

Rotational symmetry engineered, polarization and incident angle-insensitive, perfect metamaterial absorber for X and Ku band wireless applications.

In this paper, a square enclosed split-maze shaped metamaterial absorber is proposed for X and Ku band wireless applications. Two square metal enclosures were introduced around the split-maze structure to make it rotational symmetric and thus insensitive to cross-polarization. The proposed absorber has shown maximum absorptions at 9.33 GHz, 12.83 GHz, 13.86 GHz, and 15.61 GHz with single negative value of permittivity. The absorber is insensitive to the incident angle of applied EM waves for normal and oblique incidence up to 180 degrees. In addition, it was proved co- & cross-polarization insensitive due to the symmetric structure of the patch. A comprehensive equivalent circuit analysis was done to explain the fundamental EM behaviour of the metamaterial structure, and the circuit outputs coincided with the simulation results. Finally, the metamaterial was measured for both unit cell, and the array after fabrication and simulation results were validated. The proposed MMA is suitable for wireless applications in devices, especially for sensing, EM energy harvesting, EM coupling reduction, and antenna gain enhancement purposes.

Polarization and angular insensitive bendable metamaterial absorber for UV to NIR range.

Broadband absorbers are required for solar energy harvesting because they efficiently absorb the incident photon in the wide-ranging solar spectrum. To ensure high absorption of photons, metamaterial absorbers (MMAs) have been a growing area of interest in recent years. In this article, an MMA is proposed using a metal-insulator-metal (MIM) structure (Ni-SiO2-Ni) that shows a near-unity broadband absorption of wavelengths from 300 to 1600 nm, with a 95.77% average absorption and a peak absorption of 99.999% at 772.82 nm. The MMA is polarization insensitive as well as wide incident angle stable. Analysis of the effects of mechanical bending on the absorption of the proposed structure shows that absorption holds satisfactory values at different degrees of mechanical loading. The suggested MMA unit cell structure was computationally simulated using the Finite Integration Technique (FIT) and verified using the Finite Element Method (FEM). To analyze the feasibility of the proposed MMA as a solar cell, it is investigated with the universal AM 1.5 solar spectrum characteristics. Besides solar energy harvesting, the proposed MMA unit cell may be employed in a variety of diverse optical applications, including sensors, detectors, and imaging.

Wide-Oblique-Incident-Angle Stable Polarization-Insensitive Ultra-Wideband Metamaterial Perfect Absorber for Visible Optical Wavelength Applications.

Metamaterial absorbers are very attractive due to their significant absorption behavior at optical wavelengths, which can be implemented for energy harvesting, plasmonic sensors, imaging, optical modulators, photovoltaic detectors, etc. This paper presents a numerical study of an ultra-wide-band double square ring (DSR) metamaterial absorber (MMA) for the complete visible optical wavelength region, which is designed with a three-layer (tungsten-silicon dioxide-tungsten) substrate material. Due to the symmetricity, a polarization-insensitive absorption is obtained for both transverse electric (TE) and transverse magnetic (TM) modes by simulation. An absorption above 92.2% and an average absorption of 97% are achieved in the visible optical wavelength region. A peak absorption of 99.99% is achieved at 521.83 nm. A wide range of oblique incident angle stabilities is found for stable absorption properties. A similar absorption is found for different banding angles, which may occur due to external forces during the installation of the absorber. The absorption is calculated by the interference theory (IT) model, and the polarization conversion ratio (PCR) is also validated to verify the perfect MMA. The electric field and magnetic field of the structure analysis are performed to understand the absorption property of the MMA. The presented MMA may be used in various applications such as solar cells, light detection, the biomedical field, sensors, and imaging.

Polarization insensitive symmetrical structured double negative (DNG) metamaterial absorber for Ku-band sensing applications.

Metamaterial absorber (MMA) is now attracting significant interest due to its attractive applications, such as thermal detection, sound absorption, detection for explosive, military radar, wavelength detector, underwater sound absorption, and various sensor applications that are the vital part of the internet of things. This article proposes a modified square split ring resonator MMA for Ku-band sensing application, where the metamaterial structure is designed on FR-4 substrate material with a dielectric constant of 4.3 and loss tangent of 0.025. Perfect absorption is realized at 14.62 GHz and 16.30 GHz frequency bands, where peak absorption is about 99.99% for both frequency bands. The proposed structure shows 70% of the average absorption bandwidth of 420 MHz (14.42-14.84 GHz) and 480 MHz (16.06-16.54 GHz). The metamaterial property of the proposed structure is investigated for transverse electromagnetic mode (TEM) and achieved negative permittivity, permeability, and refractive index property for each absorption frequency band at 0°, 45°, and 90° polarization angles. Interference theory is also investigated to verify the absorption properties. Moreover, the permittivity sensor application is investigated to verify the sensor performance of the proposed structure. Finally, a comparison with recent works is performed, which shows that the proposed MMA can be a good candidate for Ku-band perfect absorber and sensing applications.

Metamaterial based on an inverse double V loaded complementary square split ring resonator for radar and Wi-Fi applications.

In this research paper, an inverse double V loaded complementary square split ring resonator based double negative (DNG) metamaterial has been developed and examined numerically and experimentally. The electromagnetic (EM) properties of the proposed inverse double V-structure were calculated using computer simulation technology (CST-2019) and the finite integration technique (FIT). The designed metamaterial provides three resonance frequencies are 2.86, 5, and 8.30 GHz, covering S-, C-, and X-bands. The total size of the recommended unit cell is 8 [Formula: see text] 8 [Formula: see text] 1.524 mm3, and a high effective medium ratio (EMR) value of 13.11 was found from it. The - 10 dB bandwidths of this structure are 2.80 to 2.91, 4.76 to 5.17, and 8.05 to 8.42 GHz. The proposed structure's novelty is its small size, simple resonator structure, which provides double negative characteristics, high EMR, maximum coverage band, and required resonance frequencies. Wi-Fi network speeds are generally faster when frequencies in the 5 GHz band are used. Since the proposed structure provides a 5 GHz frequency band, hence the suggested metamaterial can be used in Wi-Fi for high bandwidth and high-speed applications. The marine radars operate in X-band, and weather radar works in S-band. Since the designed cell provides two more resonance frequencies, i.e., 2.86 GHz (S-band) and 8.30 GHz (X-band), the proposed metamaterial could be used in weather radar and marine radar. The design process and various parametric studies have been analyzed in this article. The equivalent circuit is authenticated using the advanced design system (ADS) software compared with CST simulated result. The surface current, E-field, and H-field distributions have also been analyzed. Different types of array structure, i.e., 1 [Formula: see text] 2, 2 [Formula: see text] 2, 3 [Formula: see text] 3, 4 [Formula: see text] 4, and 20 [Formula: see text] 25 is examined and validated by the measured result. The simulated and measured outcome is an excellent agreement for the inverse double V loaded CSSRR unit cell and array. We showed the overall performance of the suggested structure is better than the other structures mentioned in the paper. Since the recommended metamaterial unit cell size is small, provides desired resonance frequency, gives a large frequency band and high EMR value; hence the suggested metamaterial can be highly applicable for Radar and Wi-Fi.

Symmetric resonator based tunable epsilon negative near zero index metamaterial with high effective medium ratio for multiband wireless applications.

In this paper, a tuned metamaterial (MTM) consisting of a symmetric split ring resonator is presented that exhibits epsilon negative (ENG), near zero permeability and refractive index properties for multiband microwave applications. The proposed metamaterial is constituted on a Rogers (RT-5880) substrate with 1.57 mm thickness and the electrical dimension of 0.14λ × 0.14λ, where wavelength, λ is calculated at 4.2 GHz. The symmetric resonating patch is subdivided into four equal and similar quartiles with two interconnecting split rings in each quartile. The quartiles are connected at the center of the substrate with a square metal strip with which four tuning metal strips are attached. These tuning metal strips are acted as spacers between four quartiles of the resonator patch. Numerical simulation of the proposed design is executed in CST microwave studio. The proposed MTM provides four resonances of transmission coefficient (S21) at 4.20 GHz, 10.14 GHz, 13.15 GHz, and 17.1 GHz covering C, X and Ku bands with negative permittivity, near zero permeability and refractive index. The calculated effective medium ratio (EMR) is 7.14 at 4.2 GHz indicates its compactness. The resonance frequencies are selective in nature which can be easily tuned by varying the length of the tuning metal stubs. The equivalent circuit of the proposed MTM is modelled in Advanced Design Software (ADS) that exhibits a similar S21 compared with CST simulation. Surface current, electric and magnetic fields are analyzed to explain the frequency tuning property and other performances of the MTM. Compact size, ENG with near zero permeability and refractive index along with frequency selectivity through tuning provides flexibility for frequency selective applications of this MTM in wireless communications.