Spatiotemporal analysis of equine infectious anemia and prediction of risk areas in Europe.

Equine Infectious Anemia (EIA) is a vector-borne persistent viral infection in equine animals. The EIA is characterized by recurrent fever, thrombocytopenia, depression, anemia, rapid weight loss, and lower body edema. Control of EIA is achieved through the elimination or isolation of infected animals, resulting in significant economic losses. In recent years, many countries in Europe have experienced outbreaks of EIA, which could potentially develop into a new wave of epidemic and pose a significant threat to the healthy development of the equine industry. This study utilized spatiotemporal analysis techniques and ecological niche modeling to investigate the spatiotemporal distribution characteristics of historical EIA outbreaks and predict risk areas for EIA occurrence in Europe. Spatiotemporal analysis results indicate that from 2005 to 2023, the EIA outbreaks in Europe exhibit five significant spatiotemporal clusters, with hotspots concentrated in southeastern France and northwestern Italy. Ecological niche modeling reveals that western, central, and southern Europe are high-risk areas for EIA outbreaks. Annual mean temperature, annual precipitation, and horse density are important variables that influence the occurrence of EIA. The results of this study can provide decision-makers with valuable insights, helping with EIA monitoring and resource allocation.

Recent progress in energy-saving electrocatalytic hydrogen production via regulating the anodic oxidation reaction.

Hydrogen energy with its advantages of high calorific value, renewable nature, and zero carbon emissions is considered an ideal candidate for clean energy in the future. The electrochemical decomposition of water, powered by renewable and clean energy sources, presents a sustainable and environmentally friendly approach to hydrogen production. However, the traditional electrochemical overall water-splitting reaction (OWSR) is limited by the anodic oxygen evolution reaction (OER) with sluggish kinetics. Although important advances have been made in efficient OER catalysts, the theoretical thermodynamic difficulty predetermines the inevitable large potential (1.23 V vs. RHE for the OER) and high energy consumption for the conventional water electrolysis to obtain H2. Besides, the generation of reactive oxygen species at high oxidation potentials can lead to equipment degradation and increase maintenance costs. Therefore, to address these challenges, thermodynamically favorable anodic oxidation reactions with lower oxidation potentials than the OER are used to couple with the cathodic hydrogen evolution reaction (HER) to construct new coupling hydrogen production systems. Meanwhile, a series of robust catalysts applied in these new coupled systems are exploited to improve the energy conversion efficiency of hydrogen production. Besides, the electrochemical neutralization energy (ENE) of the asymmetric electrolytes with a pH gradient can further promote the decrease in application voltage and energy consumption for hydrogen production. In this review, we aim to provide an overview of the advancements in electrochemical hydrogen production strategies with low energy consumption, including (1) the traditional electrochemical overall water splitting reaction (OWSR, HER-OER); (2) the small molecule sacrificial agent oxidation reaction (SAOR) and (3) the electrochemical oxidation synthesis reaction (EOSR) coupling with the HER (HER-SAOR, HER-EOSR), respectively; (4) regulating the pH gradient of the cathodic and anodic electrolytes. The operating principle, advantages, and the latest progress of these hydrogen production systems are analyzed in detail. In particular, the recent progress in the catalytic materials applied to these coupled systems and the corresponding catalytic mechanism are further discussed. Furthermore, we also provide a perspective on the potential challenges and future directions to foster advancements in electrocatalytic green sustainable hydrogen production.

Empirical analysis of trade costs and their impact on carbon emissions in RCEP countries.

Global economic integration and environmental issues have attracted widespread attention in recent years. As one of the world's most significant free trade agreements, the Regional Comprehensive Economic Partnership (RCEP) significantly impacts trade and the environment. However, research on the relationship between trade costs and carbon emissions still needs to be completed. This study explores the relationship between trade costs and carbon emissions within the framework of the Trade Benefit Theory, which posits that trade liberalization and openness generate economic benefits through increased efficiency, technological advancement, and economic growth. This study analyzes panel data from 12 RCEP countries from 2001 to 2014, employing static and dynamic panel models to examine the relationship between trade costs and carbon emissions. The analysis utilizes mixed regression, fixed (random) effects models, and the systematic GMM method. The results indicate that decreases in trade costs are associated with reduced environmental pollution, aligning with the Environmental Kuznets Curve (EKC) hypothesis, which posits an N-shaped relationship between trade costs and carbon emissions. Implementing RCEP facilitates a decrease in trade-related pollution, suggesting that reducing trade costs can help mitigate environmental pollution. Furthermore, the observed N-shaped EKC for trade costs and carbon emissions highlights the potential of RCEP to reduce the impact of trade-related pollution.

A novel bi-layered asymmetric membrane incorporating demineralized dentin matrix accelerates tissue healing and bone regeneration in a rat skull defect model.

Objectives: The technique of guided bone regeneration (GBR) has been widely used in the field of reconstructive dentistry to address hard tissue deficiency. The objective of this research was to manufacture a novel bi-layered asymmetric membrane that incorporates demineralized dentin matrix (DDM), a bioactive bone replacement derived from dentin, in order to achieve both soft tissue isolation and hard tissue regeneration simultaneously. Methods: DDM particles were harvested from healthy, caries-free permanent teeth. The electrospinning technique was utilized to synthesize bi-layered DDM-loaded PLGA/PLA (DPP) membranes. We analyzed the DPP bilayer membranes' surface topography, physicochemical properties and degradation ability. Rat skull critical size defects (CSDs) were constructed to investigate in vivo bone regeneration. Results: The synthesized DPP bilayer membranes possessed suitable surface characteristics, acceptable mechanical properties, good hydrophilicity, favorable apatite forming ability and suitable degradability. Micro-computed tomography (CT) showed significantly more new bone formation in the rat skull defects implanted with the DPP bilayer membranes. Histological evaluation further revealed that the bone was more mature with denser bone trabeculae. In addition, the DPP bilayer membrane significantly promoted the expression of the OCN matrix protein in vivo. Conclusions: The DPP bilayer membranes exhibited remarkable biological safety and osteogenic activity in vivo and showed potential as a prospective candidate for GBR applications in the future.

Liver cancer from the perspective of single-cell sequencing: a review combined with bibliometric analysis.

BACKGROUND: Liver cancer (LC) is a prevalent malignancy and a leading cause of cancer-related mortality worldwide. Extensive research has been conducted to enhance patient outcomes and develop effective prevention strategies, ranging from molecular mechanisms to clinical interventions. Single-cell sequencing, as a novel bioanalysis technology, has significantly contributed to the understanding of the global cognition and dynamic changes in liver cancer. However, there is a lack of bibliometric analysis in this specific research area. Therefore, the objective of this study is to provide a comprehensive overview of the knowledge structure and research hotspots in the field of single-cell sequencing in liver cancer research through the use of bibliometrics. METHOD: Publications related to the application of single-cell sequencing technology to liver cancer research as of December 31, 2023, were searched on the web of science core collection (WoSCC) database. VOSviewers, CiteSpace, and R package "bibliometrix" were used to conduct this bibliometric analysis. RESULTS: A total of 331 publications from 34 countries, primarily led by China and the United States, were included in this study. The research focuses on the application of single cell sequencing technology to liver cancer, and the number of related publications has been increasing year by year. The main research institutions involved in this field are Fudan University, Sun Yat-Sen University, and the Chinese Academy of Sciences. Frontiers in Immunology and Nature Communications is the most popular journal in this field, while Cell is the most frequently co-cited journal. These publications are authored by 2799 individuals, with Fan Jia and Zhou Jian having the most published papers, and Llovet Jm being the most frequently co-cited author. The use of single cell sequencing to explore the immune microenvironment of liver cancer, as well as its implications in immunotherapy and chemotherapy, remains the central focus of this field. The emerging research hotspots are characterized by keywords such as 'Gene-Expression', 'Prognosis', 'Tumor Heterogeneity', 'Immunoregulation', and 'Tumor Immune Microenvironment'. CONCLUSION: This is the first bibliometric study that comprehensively summarizes the research trends and developments on the application of single cell sequencing in liver cancer. The study identifies recent research frontiers and hot directions, providing a valuable reference for researchers exploring the landscape of liver cancer, understanding the composition of the immune microenvironment, and utilizing single-cell sequencing technology to guide and enhance the prognosis of liver cancer patients.

Deterministic direct design method for a spherical-aberration-free singlet lens with reduced coma.

It is still challenging to find a spherical-aberration-free singlet lens with well corrected coma due to an undesired and complicated residual high-order coma. In this paper, we present a spherical-aberration-free singlet lens with reduced coma containing high-order coma contribution. This design algorithm is to deduce the front aspherical surface parameters from the back spherical surface using meridional ray tracing to find the proper values of the back focal length and the back spherical radius to reduce the coma. The exemplary lens demonstrates an excellent well-balanced and diffraction-limited performance at the field angle ranging from 0.0° to 2.5° with a working F# equal to 1.65.

Exploration of chemical components and metabolite synthesis pathways in eight Ephedra species based on HS-GC-MS and UPLC-Q-TOF-MS.

Objective: Ephedra, widely used in clinical practice as a medicinal herb, belongs to the genus Ephedra in the family Ephedraceae. However, the presence of numerous Ephedra varieties and variants requires differentiation for accurate identification. Methods: In this study, we employed headspace gas chromatography mass spectrometry (HS-GC-MS), ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS), and global natural products social molecular networking (GNPS) for chemical component identification. Chemometric analysis was used to analyze the differential components. Metabolic analysis and Kyoto encyclopedia of genes and genomes (KEGG) enrichment were utilized to explore the synthesis pathways of different components. Result: A total of 83 volatile and 79 non-volatile components were identified in Ephedra species. Differential analysis revealed that among the eight Ephedra stems, 18 volatile and 19 non-volatile differential compounds were discovered, whereas Ephedra roots exhibited 21 volatile and 17 non-volatile markers. Volatile compounds were enriched in four synthetic pathways, while non-volatile components were enriched in five pathways among the differentiated components. Conclusion: This study is the first to conduct a comparative analysis of chemical components in different Ephedra species and parts. It provides a foundational reference for authenticating Ephedra herbs, evaluating medicinal resources, and comparing quality in future studies.

Peripheral Th17/Treg imbalance in Chinese patients with untreated antisynthetase syndrome associated interstitial lung disease.

Interstitial lung disease (ILD) is a common and fatal manifestation of antisynthetase syndrome (ASS). The aim of this study was to provide new insight into investigate peripheral blood lymphocytes, CD4+ T cells, cytokine levels and their relation to the clinical profile of untreated patients with ASS-ILD. The retrospective study population included thirty patients diagnosed with ASS-ILD and 30 healthy controls (HCs). Baseline clinical and laboratory data were collected for all subjects, including peripheral blood lymphocyte, CD4+ T cell subsets measured by flow cytometry, and serum cytokine levels measured by multiple microsphere flow immunofluorescence. Their correlations with clinical and laboratory findings were analyzed by Pearson's or Spearman's correlation analysis. In addition, the Benjamini-Hochberg method was used for multiple correction to adjust the p-values. Patients with ASS-ILD had lower CD8+ T cells, higher proportion of Th17 cells and Th17/Treg ratio than HCs. Serum cytokine levels (IL-1ß, IL-6, IL-12, IL-17, IL-8, IL-2, IL-4, IL-10, TNF-α and IFN-γ) were higher in patients with ASS-ILD than HCs. Moreover, Th17/Treg ratio was negatively correlated with diffusing capacity of carbon monoxide (DLCO)%. Our study demonstrated abnormalities of immune disturbances in patients with ASS-ILD, characterized by decreased CD8+ T cells and an increased Th17/Treg ratio, due to an increase in the Th17 cells. These abnormalities may be the immunological mechanism underlying the development of ILD in ASS.

Characterizing and decoding the key odor-active compounds in fresh, pasteurized, and high pressure processing sea buckthorn (Hippophae rhamnoides L.) juice.

The non-thermal and thermal effects on aroma of sea buckthorn juice have rarely been investigated. In this study, 57 odor compounds were identified in fresh sea buckthorn juice (FSBJ), high pressure processing sea buckthorn juice (HSBJ), and pasteurized sea buckthorn juice (PSBJ), including 29 esters, 8 aldehydes, 1 ketone, 5 alcohols, 5 acids, 6 terpenoids, and 3 others. Ethyl 2-methylbutanoate, ethyl 3-methylbutanoate, ethyl hexanoate, and ethyl 2-hydroxy-3-methylbutanoate with flavor dilution factors ranging from 729 to 59,049 contributed to the fruity odors of FSBJ and HSBJ. Besides, the formation of off-odor compounds including hexanal, nonanal, furfural, 3-methylbutanoic acid, and dimethyl disulfide with odor activity values ≥ 1, imparts fatty, roasted, sweaty, and cooked odor in PSBJ. The variations of vitamin C and reducing sugar are significantly associated with changes in odor-active compounds during pasteurized processing. These findings provide new insights that high pressure processing minimizes the adverse effects of pasteurization.

Characterization, hazard identification, and risk assessment of volatile organic compounds in Poly(butylene adipate-co-terephthalate)-based food contact articles.

The chemical safety of poly (butylene adipate-co-terephthalate) (PBAT) based food contact articles (FCAs) has aroused increasing toxicological concerns in recent years, but the chemical characterization and associated risk assessment still remain inadequate as it fails to elucidate the distribution pattern and discern the potential genotoxic and carcinogenic hazards of the identified substances. Herein, the volatile organic compounds (VOCs) in 50 batches of PBAT-based FCAs of representative categories and 10 batches of PLA and PBAT pellets were characterized, by which 237 VOCs of 10 chemical categories were identified and exhibited characteristic distribution patterns in the chemical spaces derived from their molecular descriptors. Chemical hazards associated with the identified VOCs were discerned by a hazard-driven classification scheme integrating hazard-related knowledge from multiple publicly available sources, and 34 VOCs were found to bear genotoxic or carcinogenic hazards and to feature higher average molecular weight than the other VOCs. Finally, the Risk and hazard quotient (HQ) calculated as the metrics of risk suggested that all identified VOCs posed acceptable risks (Risk<10-4 or HQ < 1), whereas oxolane, butyrolactone, N,N-dimethylacetamide, 2-butoxyethanol, benzyl alcohol, and 1,2,3-trichloropropane posed non-negligible (Risk>10-6) genotoxic or carcinogenic risk and thus should be of prioritized concern to promote the chemical safety of PBAT-based FCAs.

Graphene/ chitosan tubes inoculated with dental pulp stem cells promotes repair of facial nerve injury.

Introduction: Facial nerve injury significantly impacts both the physical and psychological] wellbeing of patients. Despite advancements, there are still limitations associated with autografts transplantation. Consequently, there is an urgent need for effective artificial grafts to address these limitations and repair injuries. Recent years have witnessed the recognition of the beneficial effects of chitosan (CS) and graphene in the realm of nerve repair. Dental pulp stem cells (DPSCs) hold great promise due to their high proliferative and multi-directional differentiation capabilities. Methods: In this study, Graphene/CS (G/CST) composite tubes were synthesized and their physical, chemical and biological properties were evaluated, then DPSCs were employed as seed cells and G/CST as a scaffold to investigate their combined effect on promoting facial nerve injury repair. Results and Disscussion: The experimental results indicate that G/CST possesses favorable physical and chemical properties, along with good cyto-compatibility. making it suitable for repairing facial nerve transection injuries. Furthermore, the synergistic application of G/CST and DPSCs significantly enhanced the repair process for a 10 mm facial nerve defect in rabbits, highlighting the efficacy of graphene as a reinforcement material and DPSCs as a functional material in facial nerve injury repair. This approach offers an effective treatment strategy and introduces a novel concept for clinically managing facial nerve injuries.

[Effects and Mechanisms of Polystyrene Microplastics on Extracellular Antibiotic Resistance Genes in Wastewater].

Microplastics (MPs) and antibiotic resistance genes (ARGs) are typical co-existing emerging pollutants in wastewater treatment plants. MPs have been shown to alter the distribution pattern of ARGs in sludge, but their effects on free extracellular ARGs (feARGs) in wastewater remain unclear. In this study, we used fluorescence quantitative PCR to investigate the dynamics of feARGs (including tetC, tetO, sul1, and sul2) in wastewater and their transition mechanisms after 60 d of exposure to typical MPs (polystyrene, PS). The results showed that the absolute abundance of tetracycline feARGs decreased by 28.4 %-76.0 % and 35.2 %-96.2 %, respectively, under nm-level and mm-level PS exposure and changed by -55.4 %-122.4 % under µm-level PS exposure. The abundance of sul1 showed a trend of nm-level > µm-level > mm-level upon PS exposure, and the changes in sul1 abundance was greater with ρ(PS)=50 mg·L-1 exposure. The relative abundance of sul2 was reduced by 25.4 %-42.6 % and 46.1 %-90.3 % after µm-level and mm-level PS exposure, respectively, and increased by 1.9-3.9 times after nm-level PS exposure, and the sul2 showed a higher reduction at ρ (PS)=50 mg·L-1 exposure than that at ρ (PS)=0.5 mg·L-1. The Pearson correlation analysis showed that the relative abundance of feARGs during PS exposure was positively correlated with cell membrane permeability and typical mobile genetic elements (intI1) abundance and negatively correlated with reactive oxygen species level. Our findings elucidated the effects and corresponding mechanisms of PS on the growth and mobility of feARGs in wastewater, providing a scientific basis for the control of the combined MPs and ARGs pollution in wastewater.

Sodium Octahydridotriborate as a Solid Electrolyte with Excellent Stability Against Sodium-Metal Anode.

Solid-state sodium metal batteries have been extensively investigated because of their potential to improve safety, cost-effectiveness, and energy density. The development of such batteries urgently required a solid-state electrolyte with fast Na-ion conduction and favorable interfacial compatibility. Herein, the progress on developing the NaB3H8 solid-state electrolytes is reported, which show a liquid-like ionic conductivity of 0.05 S cm-1 at 56 °C with an activation energy of 0.35 eV after an order-disorder phase transformation, matching or surpassing the best single-anion hydridoborate conductors investigated up to now. The steady polarization voltage and significantly decreased resistance are achieved in the symmetric Na/NaB3H8/Na cell, indicating the great electrochemical stability and favorable interfacial contact with the Na metal of NaB3H8. Furthermore, a Na/NaB3H8/TiS2 battery, the first high-rate (up to 1 C) solid-state sodium metal battery using the single-anion hydridoborate electrolyte, is demonstrated, which exhibits superior rate capability (168.2 mAh g-1 at 0.1 C and 141.2 mAh g-1 at 1 C) and long-term cycling stability (70.9% capacity retention at 1 C after 300 cycles) at 30 °C. This work may present a new possibility to solve the interfacial limitations and find a new group of solid-state electrolytes for high-performance sodium metal batteries.

Stabilizing and Activating Active Sites: 1T-MoS2 Supported Pd Single Atoms for Efficient Hydrogen Evolution Reaction.

Metallic 1T-MoS2 with high intrinsic electronic conductivity performs Pt-like catalytic activity for hydrogen evolution reaction (HER). However, obtaining pure 1T-MoS2 is challenging due to its high formation energy and metastable properties. Herein, an in situ SO4 2--anchoring strategy is reported to synthesize a thin layer of 1T-MoS2 loaded on commercial carbon. Single Pd atoms, constituting a substantial loading of 7.2 wt%, are then immobilized on the 1T-phase MoS2 via Pd─S bonds to modulate the electronic structure and ensure a stable active phase. The resulting Pd1/1T-MoS2/C catalyst exhibits superior HER performance, featuring a low overpotential of 53 mV at the current density of 10 mA cm-2, a small Tafel slope of 37 mV dec-1, and minimal charge transfer resistance in alkaline electrolyte. Moreover, the catalyst also demonstrates efficacy in acid and neutral electrolytes. Atomic structural characterization and theoretical calculations reveal that the high activity of Pd1/1T-MoS2/C is attributed to the near-zero hydrogen adsorption energy of the activated sulfur sites on the two adjacent shells of atomic Pd.

Thalassotalea psychrophila sp. nov., Thalassotalea nanhaiensis sp. nov. and Thalassotalea fonticola sp. nov., three psychrophilic bacteria isolated from deep-sea sediment.

Three psychrophilic bacteria, designated as strains SQ149T, SQ345T, and S1-1T, were isolated from deep-sea sediment from the South China Sea. All three strains were the most closely related to Thalassotalea atypica RZG4-3-1T based on the 16S rRNA gene sequence analysis (similarity ranged from 96.45 to 96.67 %). Phylogenetic analysis based on the 16S rRNA gene and core-genome sequences showed that three strains formed a cluster within the genus Thalassotalea. The average amino acid identity, average nucleotide identity, and digital DNA-DNA hybridization values among the three strains and closest Thalassotalea species were far below the cut-off value recommended for delineating species, indicating they each represented a novel species. All three strains were Gram-stain-negative, rod-shaped, and contained summed feature 3 (C16 : 1 ω7c and/or C16 : 1 ω6c) as the predominant fatty acid, Q-8 as the major respiratory quinone, and phosphatidylethanolamine and phosphatidylglycerol as predominant polar lipids. Based on the genomic, phylogenetic, and phenotypic characterizations, each strain is considered to represent a novel species within the genus Thalassotalea, for which the names Thalassotalea psychrophila sp. nov. (type strain SQ149T=MCCC 1K04231T=JCM 33807T), Thalassotalea nanhaiensis sp. nov. (type strain SQ345T=MCCC 1K04232T=JCM 33808T), and Thalassotalea fonticola sp. nov. (type strain S1-1T=MCCC 1K06879T=JCM 34824T) are proposed.

Development and validation of a risk prediction model and prediction tools for post-thrombotic syndrome in patients with lower limb deep vein thrombosis.

PURPOSE: Our research aims to compare the predictive performance of decision tree algorithms (DT) and logistic regression analysis (LR) in constructing models, and develop a Post-Thrombotic Syndrome (PTS) risk stratification tool. METHODS: We retrospectively collected and analyzed relevant case information of 618 patients diagnosed with DVT from January 2012 to December 2021 in three different tertiary hospitals in Jiangxi Province as the modeling group. Additionally, we used the case information of 212 patients diagnosed with DVT from January 2022 to January 2023 in two tertiary hospitals in Hubei Province and Guangdong Province as the validation group. We extracted electronic medical record information including general patient data, medical history, laboratory test indicators, and treatment data for analysis. We established DT and LR models and compared their predictive performance using receiver operating characteristic (ROC) curves and confusion matrices. Internal and external validations were conducted. Additionally, we utilized LR to generate nomogram charts, calibration curves, and decision curves analysis (DCA) to assess its predictive accuracy. RESULTS: Both DT and LR models indicate that Year, Residence, Cancer, Varicose Vein Operation History, DM, and Chronic VTE are risk factors for PTS occurrence. In internal validation, DT outperforms LR (0.962 vs 0.925, z = 3.379, P < 0.001). However, in external validation, there is no significant difference in the area under the ROC curve between the two models (0.963 vs 0.949, z = 0.412, P = 0.680). The validation results of calibration curves and DCA demonstrate that LR exhibits good predictive accuracy and clinical effectiveness. A web-based calculator software of nomogram (https://sunxiaoxuan.shinyapps.io/dynnomapp/) was utilized to visualize the logistic regression model. CONCLUSIONS: The combination of decision tree and logistic regression models, along with the web-based calculator software of nomogram, can assist healthcare professionals in accurately assessing the risk of PTS occurrence in individual patients with lower limb DVT.

Surface-Integrating Oxygen Vacancy and CuxO Nanodots Enabling Synergistic Electric Field and Dual Catalytic Sites Boosting CO2 Photoreduction.

High carrier separation efficiency and rapid surface catalytic reaction are crucial for enhancing catalytic CO2 photoreduction reaction. Herein, integrated surface decoration strategy with oxygen vacancies (Ov) and anchoring CuxO (1 < x < 2) nanodots below 10 nm is realized on Bi2MoO6 for promoting CO2 photoreduction performance. The charge interaction between Ov and anchored CuxO enables the formation of enhanced internal electric field, which provides a strong driving force for accelerating the separation of photocharge carriers on the surface of Bi2MoO6 (ηsurf ≈71%). They can also cooperatively reduce the surface work function of Bi2MoO6, facilitating the migration of carrier to the surface. Meanwhile, surface-integrated Ov and CuxO nanodots allowing dual catalytic sites strengthens the adsorption and activation CO2 into *CO2 over Bi2MoO6, considerably boosting the progression of CO2 conversion process. In the absence of co-catalyst or sacrificial agent, Bi2MoO6 with Ov and CuxO nanodots achieves a photocatalytic CO generation rate of 12.75 µmol g-1 h-1, a remarkable increase of over ≈15 times that of the original counterpart. This work provides a new idea for governing charge movement behaviors and catalytic reaction thermodynamics on the basis of synergistic improvement of electric field and active sites by coupling of the internal defects and external species.

[Betulinic acid inhibits non-small cell lung cancer by repolarizing tumor-associated macrophages via mTOR signaling pathway].

The abnormal activation of the mammalian target of rapamycin(mTOR) signaling pathway in non-small cell lung cancer(NSCLC) is closely associated with distant metastasis, drug resistance, tumor immune escape, and low overall survival. The present study reported that betulinic acid(BA), a potent inhibitor of mTOR signaling pathway, exhibited an inhibitory activity against NSCLC in vitro and in vivo. CCK-8 and colony formation results demonstrated that BA significantly inhibited the viability and clonogenic ability of H1299, A549, and LLC cells. Additionally, the treatment with BA induced mitochondrion-mediated apoptosis of H1299 and LLC cells. Furthermore, BA inhibited the mobility and invasion of H1299 and LLC cells by down-regulating the expression level of matrix metalloproteinase 2(MMP2) and impairing epithelial-mesenchymal transition. The results demonstrated that the inhibition of mTOR signaling pathway by BA decreased the proportion of M2 phenotype(CD206 positive) cells in total macrophages. Furthermore, a mouse model of subcutaneous tumor was established with LLC cells to evaluate the anti-tumor efficiency of BA in vivo. The results revealed that the administration of BA dramatically retarded the tumor growth and inhibited the proliferation of tumor cells. More importantly, BA increased the ratio of M1/M2 macrophages in the tumor tissue, which implied the enhancement of anti-tumor immunity. In conclusion, BA demonstrated the inhibitory effect on NSCLC by repolarizing tumor-associated macrophages via the mTOR signaling pathway.

A meta-analysis of antibiotic residues in the Beibu Gulf.

Antibiotic residue stands as a significant ongoing environmental issue, with aquaculture being a major source of annual antibiotic discharge into the ocean. Nevertheless, there is still an incomplete evaluation of antibiotic residues in the Beibu Gulf, an area encompassed by two prominent aquaculture nations, China and Vietnam. The present systematic review and meta-analysis was conducted to examine the presence antibiotic residues in the Beibu Gulf based on published studies. Data were obtained through eight databases up to December 19th, 2023, and were updated on April 15th, 2024. The pooled concentration of antibiotic residues in seawater was 5.90 (ng/L), ranging from 5.73 to 6.06 (ng/L), and was 8.03 (ng/g), ranging from 7.77 to 8.28 (ng/g) in sediments. Fluoroquinolones, tetracyclines, and macrolides were identified as the main antibiotics found in both seawater and sediment samples. The Beibu Gulf showed higher antibiotic levels in its western and northeastern areas. Additionally, the nearshore mangrove areas displayed the highest prevalence of antibiotic residues. It is strongly advised to conduct regular long-term monitoring of antibiotic residues in the Beibu Gulf. Collaborative surveys covering the entire Beibu Gulf involving China and Vietnam are recommended.

Highly Potent Transparent Passive Cooling Coating via Microphase-Separated Hydrogel Combining Radiative and Evaporative Cooling.

Transparent passive cooling materials can cool targets environmentally without interfering with light transmission or visual information reception. They play a prominent role in solar cells and flexible display cooling. However, achieving potent transparent cooling remains challenging, because light transmission is accompanied by thermal energy. Here we propose to realize effective passive cooling in transparent materials via a microscale phase separation hydrogel film. The poly(N-isopropylacrylamide-co-acrylamide) hydrogel presents light transmittance of >96% and infrared emissivity as high as 95%. The microphase-separated structure affords a higher enthalpy of evaporation. The film is highly adhesive. In field applications, it reduces temperatures by 9.14 °C compared to those with uncovered photovoltaic panels and 7.68 °C compared to those for bare flexible light-emitting diode screens. Simulations indicate that energy savings of 32.76-51.65 MJ m-2 year-1 can be achieved in typical tropical monsoon climates and temperate continental climates. We expect this work to contribute to energy-efficient materials and a carbon-neutral society.