A simpler potentiometric method for histamine assessment in blood sera.

Histamine intolerance results from a disequilibrium of accumulated histamine and the capacity for histamine degradation. An impaired histamine degradation based on reduced DAO activity and the resulting histamine excess may cause numerous symptoms mimicking an allergic reaction. For that, the determination of histamine in blood or in food products has great importance to identify risk factors. A new histamine-selective electrode is proposed using cucurbit[6]uril (CB[6]), as ionophore, in the analysis of biological samples. The selection of this smart supramolecular organic framework was based on its apparent stability constant of histamine-CB[6] (log ß) of 4.33. The optimized electrode based on a polymeric membrane (PVC) combines the histamine-selective ionophore with 2-nitrophenyl octyl ether as solvent mediator and potassium tetrakis(4-chlorophenyl)borate as anionic additive. Furthermore, multi-walled carbon nanotubes particles were included in the membrane composition to partly lower the detection limit of the method, while improving stability and lowering the response drift (± 4 mV). The electrodes showed a rapid response (≃ 13 s) in the pH operational range of 2.7-5.4, with a Nernstian slope of 30.9 ± 1.2 mV/dec, a detection limit of (3.00 ± 0.61) × 10-7 mol/L, and a lower limit of the linear range of (3.00 ± 0.00) × 10-7 mol/L. After miniaturization, the electrode was used as a detector in a sequential-injection lab-on-valve flow setup. The optimized flow conditions were achieved for sample injection volumes of 197 µL propelled towards the cell under detection, at a flow rate of 30 µL/s during 100 s, making the analysis of 30 samples per hour possible. The developed system was used to analyze spiked blood serum samples previously cleaned by using solid-phase extraction. The sample pretreatment of the serum samples using Oasis MCX cartridges showed outstanding efficiency for histamine determination. The recovery values for three different levels of histamine concentration (1 × 10-4 mol/L, 1 × 10-5 mol/L, and 1 × 10-6 mol/L) were (97 ± 6)%, (103 ± 1)%, and (118 ± 9)%, respectively, showing that this method was suitable for biological samples.

Potentiometric detection in liquid chromatographic systems: An overview.

Analytical techniques are extensively used in various fields of human activity to define quality and usage safety patterns of goods and consumables. Between those, liquid chromatography is probably the most common, generally combined with optical detectors. Alternatively, electroanalytical techniques provide versatile tools that offer high selectivity and sensitivity in a short time, using simple and low cost instrumentation. Amperometric, coulometric and conductimetric detectors are thus well established in HPLC with commercially available instrumentation. Despite sharing some of the stated features, the use of potentiometric detectors seems however overlooked. Potentiometry with ion-selective electrodes has been highlighted in both batch and flow analysis systems, evidenced by numerous applications performed worldwide. The determination of electrolytes in blood samples, heavy metals in natural water samples and pharmaceutical drugs in bulk drug materials are some of the representative examples. The developments achieved so far in hydrodynamic separation systems proved the great potential of potentiometry to become a competitive detection technique with the many others. Therefore, it is intended to present an overview about potentiometric detection in liquid chromatography with the purpose of enhance its importance for future analytical applications.

Development of a multicommutated flow system with chemiluminometric detection for quantification of gentamicin in pharmaceuticals.

A new flow procedure based on multicommutation with chemiluminometric detection was developed to quantify gentamicin sulphate in pharmaceutical formulations. This approach is based on gentamicin's ability to inhibit the chemiluminometric reaction between luminol and hypochlorite in alkaline medium, causing a decrease in the analytical signal. The inhibition of the analytical signal is proportional to the concentration of gentamicin sulphate, within a linear range of 1 to 4 µg mL(-1) with a coefficient variation <3%. A sample throughput of 55 samples h(-1) was obtained. The developed method is sensitive, simple, with low reagent consumption, reproducible, and inexpensive, and when applied to the analysis of pharmaceutical formulations (eye drops and injections) it gave results with RSD between 1.10 and 4.40%.

Ecotoxicological aspects related to the presence of pharmaceuticals in the aquatic environment.

Pharmaceuticals are biologically active and persistent substances which have been recognized as a continuing threat to environmental stability. Chronic ecotoxicity data as well as information on the current distribution levels in different environmental compartments continue to be sparse and are focused on those therapeutic classes that are more frequently prescribed and consumed. Nevertheless, they indicate the negative impact that these chemical contaminants may have on living organisms, ecosystems and ultimately, public health. This article reviews the different contamination sources as well as fate and both acute and chronic effects on non-target organisms. An extensive review of existing data in the form of tables, encompassing many therapeutic classes is presented.

Cyclodextrin-based potentiometric sensors for midazolam and diazepam.

In this work the implementation of benzodiazepine ion-selective electrodes for pharmaceutical formulations control is described. The solid-contact electrodes for midazolam and diazepam are based on polymeric membranes incorporating respectively beta-cyclodextrin and (2-hydroxiproyl)-gamma-cyclodextrin as ionophores, 2-fluorophenyl 2-nitrophenyl ether as plasticizer and potassium tetrakis (p-chlorophenyl) borate as ionic additive. For conventionally shaped midazolam electrode a slope of 61.9+/-1.3 mVdec(-1), a LLLR of 5.7+/-2.7 x 10(-4)gL(-1) and pH range of 2.6-5.4 was obtained, while the corresponding values for diazepam electrodes were of 67.6+/-3.0 mVdec(-1), 4.9+/-1.5 x 10(-2)gL(-1) and 1.9-2.7 pH units, respectively. Membrane optimization was based on the molar ratio between the ionophore and additive for midazolam and on inclusion cavity of cyclodextrin for diazepam. The miniaturization of the above-described electrodes gave rise to potentiometric detectors for sequential-injection lab-on-valve system with similar characteristics albeit the useful lifetime shortened from 1 year to approximately 15 days under continuous operation. The optimized flow conditions were achieved for sample injection volumes of 20 microL propelled towards the detection cell at the flow rate of 16 microLs(-1) during 80s. Real sample analysis revealed statistical accuracy and between-days precision comparable to the general used chromatographic-based procedure.

Simultaneous determination of potassium and nitrate ions in mouthwashes using sequential injection analysis with potentiometric detection.

Two methods for the determination of potassium nitrate in mouthwashes, used against dentin hypersensitivity, have been simultaneously implemented in an sequence injection analysis (SIA) system. In addition to in-line dilution of the samples, the equipment simultaneously detected potassium and nitrate using two tubular potentiometric detectors, selective to each ion, providing a real-time assessment of the quality of the results. Both determinations were shown to be precise and accurate and the obtained results do not statistically differ from those furnished by applying the AES and HPLC reference methods.

Photo-induced chemiluminometric determination of Karbutilate in a continuous-flow multicommutation assembly.

The present paper deals with the chemiluminescent determination of the herbicide Karbutilate on the basis of its previous photodegradation by using a low-pressure Hg lamp as UV source in a continuous-flow multicommutation assembly (a solenoid valves set). The pesticide solution was segmented by a solenoid valve and sequentially alternated with segments of the 0.001 mol l(-1) of NaOH solution, the suitable media for the formation of photo-fragments; then it passes through the photo-reactor and was lead to the flow-cell after being divided in small segments which were sequentially alternated with the oxidizing system; 2 x 10(-5) mol l(-1) of potassium permanganate in 0.2% pyrophosphoric acid. The studied calibration range, from 0.1 microg l(-1) to 65 mg l(-1), resulted in a linear behaviour over the range 20 microg l(-1)-20 mg l(-1) and fitting the linear equation: I=(1180+/-30)C+(15+/-5) with the correlation coefficient 0.9998. The limit of detection was 10 microg l(-1) and the sample throughput 17 h(-1). After testing the influence of a large series of potential interfering species, the method was applied to water and human urine samples.

Exploiting sequential injection analysis with lab-on-valve and miniaturized potentiometric detection Epinephrine determination in pharmaceutical products.

Miniaturized potentiometric units were constructed, evaluated and incorporated in a SIA-LOV manifold in order to the control of pharmaceutical analysis. The method validation was done with ephinefrine determinations in commercial pharmaceutical products. The optimization procedures were directed at potential versus epinephrine concentration. This approach was achieved by selecting 60cm of reactor and a flow rate of 11muLs(-1) and injecting 78muL of epinephrine standard solutions in a 1.0x10(-3)molL(-1) IO(4)(-) solution. A linear range was found for epinephrine concentrations between 2.0x10(-4) and 2.5x10(-3)molL(-l) with a slope of 35528mVLmol(-l) and r(2)=0.997. Under these conditions the analytical results for the commercial pharmaceutical formulations of 0.908 and 0.454mgmL(-1), respectively, with a R.S.D. of 0.34 for both, was obtained. Through down scaling periodate-selective electrode it was possible to benefit from the recognized advantages of the lab-on-valve sequential-injection based systems, namely regarding equipment portability, reduced consumption of the sample and the reagents and the reduction of effluent waste. Furthermore, the new periodate electrode configuration is easy to achieve in common laboratories and enables the implementation of low volume detection cell where the electrical noise, that is frequently presented in potentiometric based procedures, is significantly reduced.

Application of sequential injection analysis to pharmaceutical analysis.

Sequential injection analysis is a well established tool for automation of pharmaceutical analysis. A short historical background of this technique is given as well as a brief discussion on the basic principles and potentials. The current applications of SIA in the pharmaceutical analysis are also described and discussed. The manifolds developed offer good analytical characteristics and are suitable for analysis of drug formulations, process analysis, drug-dissolution, drug-release testing and functional assays for screening potential drugs. The results obtained are in good agreement with those furnished by the application of the reference methods presented in the pharmacopoeias.

New PVC nitrate-selective electrode: application to vegetables and mineral waters.

The paper refers the analytical potentialities of the oxa-azamacrocycles as potentiometric ionophores for the construction of electrodes selective to nitrate. Afterward, the membrane selective to nitrate is designed and optimized using a [3.3.3.3]oxazane as an ionophore. The membrane was prepared using dibutylphthalate as a solvent mediator, tetraoctylammonium as a lipophilic membrane additive, and poly(vinyl chloride (PVC) as a polymeric matrix, applied directly onto a conductive graphite/epoxy resin support. The electrodes presented a slope of 60 +/- 0.1 mV log(-1), a low limit of linear response of 4.2 x 10(-6) mol L(-1), a useful lifetime of 1 year, and improved selectivity characteristics when compared with other nitrate electrodes. The good working characteristics of this electrode, constructed without inner-reference solution, made possible its application to the determination of nitrate in different types of vegetables and bottled mineral waters without the use of a conditioning solution. The application of a significant F test proved that the results obtained were similar to those attained by application of the brucine spectrophotometric method adopted as a reference technique. Linear regression analysis also showed good agreement between the results obtained by the proposed method and the reference one.

Lactoferrin and free secretory component of human milk inhibit the adhesion of enteropathogenic Escherichia coli to HeLa cells.

BACKGROUND: Diarrhoea caused by Escherichia coli is an important cause of infant morbidity and mortality in developing countries. Enteropathogenic Escherichia coli (EPEC) is considered one of the major causes of diarrhoea in children living in developing countries. The ability of diarrhoeagenic strains of E. coli to adhere to and colonize the intestine is the first step towards developing the disease. EPEC strains adhere to enterocytes and HeLa cells in a characteristic pattern known as localized adherence. Many epidemiological studies of diarrhoea have shown that breast-feeding protects infants from intestinal infections. Both immunoglobulin and non-immunoglobulin elements of human milk are thought to contribute to the protection from diarrhoeal agents. RESULTS: The effects of human milk and its protein components on the localized adherence of EPEC were investigated. Non-immunoglobulin components of human milk responsible for the inhibition of EPEC adhesion to HeLa cells were isolated by chromatographic fractionation of human whey proteins. Besides secretory immunoglobulin A, which has been previously reported to affect the adhesion of EPEC, free secretory component (fSC) and lactoferrin (Lf) were isolated. Even in concentrations lower than those usually found in whole milk, fSC and Lf were able to inhibit the adhesion of EPEC. alpha-lactalbumin was also isolated, but showed no activity on EPEC adhesion. CONCLUSIONS: This study demonstrated that the immunoglobulin fraction, the free secretory component and lactoferrin of human milk inhibit EPEC adhesion to HeLa cells. These results indicate that fSC and Lf may be important non-specific defence factors against EPEC infections.

Clavulanate-selective electrodes--application to pharmaceutical formulations.

The construction and assessment of a clavulanate anion-selective electrode and its application to the analysis of pharmaceutical formulations by direct potentiometry are described. The electrode, prepared without inner reference solution, was fabricated by use of a PVC membrane, with bis(triphenyl-phosphoranylidene)ammonium clavulanate as ion-exchanger dissolved in 2-nitrophenyl octyl ether as intermediate solvent and p-t-octylphenol as additive. The response of the electrode was linearly dependent on concentration within the range 2.4 x 10(-3)-1 x 10(-1) mol dm(-3) (ionic strength adjusted to 0.1 mol dm(-3)); the slope of the calibration plot was -59.4+/-0.9 mV decade(-1) and the reproducibility +/-0.6 mV day(-1). The response time was less than 20 s. Relative errors were <3.5% when results from analysis by direct potentiometry were compared with those from the reference method.

Binding of lactoferrin and free secretory component to enterotoxigenic Escherichia coli.

The ability of two glycoproteins of human milk, lactoferrin and free secretory component, to bind to Escherichia coli colonization factors (CFAs) was investigated using immunocytochemistry assays of enriched fimbrial extracts. The results revealed that lactoferrin binds to fimbrial CFA I adhesin but not to CFA II adhesin (CS1 and CS3), while free secretory component interacts with both CFA I and CFA II adhesins. Our data indicate that lactoferrin and free secretory component, which are very abundant proteins of human milk, could play an important role against infant enteric disease by blocking bacterial adhesion.

Multi-task flow system for potentiometric analysis: its application to the determination of vitamin B6 in pharmaceuticals.

A flow set-up based on the sequential injection analysis concept was designed, aiming at increased automation and robustness of procedures related with potentiometric detection in pharmaceutical control. In this sense, programmable set-up calibration, ion-selective electrode characterization, standard addition techniques and titration procedures could be carried out without any stock solutions conventional handling or modification on the physical structure of the flow system. Evaluation of a flow-through vitamin B6 selective electrode and its application to routine analysis of pharmaceuticals were selected as models to demonstrate the system potentialities. The system ability to generate in-line calibrating solutions was verified by comparing the results with those obtained with solutions prepared by the manual procedure. The vitamin B6 determination in pharmaceutical products was carried out and in-line performed recoveries gave values within 97.4-103.5%. The system ability to perform titrations was ascertained using the precipitation reaction of vitamin B6 with tetraphenylborate. Other profitable features such as lower reagent consumption with a low effluent generation volume were also achieved.

Potentiometric determination of acetylsalicylic acid by sequential injection analysis (SIA) using a tubular salicylate-selective electrode.

This paper deals with the development of an automated procedure for formulation assays and dissolution tests based on a sequential injection analysis (SIA) system involving an ion-selective electrode as sensing device. Construction of a tubular salicylate (Sal) selective electrode suitable for potentiometric determination of acetylsalicylic acid (Asa) in pharmaceutical formulations is described. The flow-through electrode is formed by a PVC membrane containing 29.2% (w/w) PVC, 5.8% (w/w) tetraoctylammonium salicylate (ionic sensor), 58.5% o-nitrophenyloctylether (plasticizer) and 6.5% (w/w) p-tert-octylphenol (stabilising additive which increases electrode selectivity). The calibration range is 0.05--10 mM Sal, the limit of detection (LOD) is 0.05 mM Sal, the slope is 56.0 mV per decade at 22 degrees C. The R.S.D. is 0.20% (15 readings) when determining 2.5 mM Sal in standard solution. The electrode is used for sensing Asa after its on-line chemical hydrolysis to Sal in a SIA system. The sampling rate is 6 h(-1) but for the dissolution tests the frequency is increased to 20 h(-1). The SIA set-up is employed for the assay of Asa in plain tablets, composed tablets and effervescent tablets and for performing dissolution tests of normal and sustained release tablets. Results obtained by this technique compare well with those required by the US Pharmacopoeia XXIV.

A flow system with a conventional spectrophotometer for the chemiluminescent determination of lactic acid in yoghurt.

A flow-based analytical procedure for lactate determination in yoghurt by chemiluminescence using a conventional UV-Vis spectrophotometer as detector is described. The radiation source was switched off. The flow cell was machined in acrylic with a 1 mm path length and a 80 mm(2) surface and was positioned 2 mm distal of the photodetector (100 mm(2) sensible area) in order to improve detection. The flow network computer-controlled comprised a set of three-way solenoid valves assembled to implement the multicommutation approach. The chemiluminescence was obtained by using the reaction of luminol with hydrogen peroxide, catalyzed by hexacyanoferrate (III) after enzymatic reaction with lactate. The lactate oxidase enzyme was immobilized on porous silica beads (glass aminopropyl, SIGMA). The signal generated by the spectrophotometer reaction was read by the microcomputer and stored as a function of time for further treatment. Immobilization condition, enzyme concentration, temperature, pH, stability of the enzymatic reactor, and flow rates were investigated. The feasibility of the system was ascertained by analyzing a set of yoghurt samples. Results were in agreement with those obtained by a conventional method (Boehringer UV-Kit), and no significant difference at 95% confidence level was observed. A linear response within 10-125 mg l(-1)l-lactate, a 1.9% standard deviation (n=10), and an analytical throughput of 55 determinations per hour were achieved.

Sequential injection system for the spectrophotometric determination of reducing sugars in wines.

A sequential injection system for the spectrophotometric determination of reducing sugars in wines is described. The methodology is based on the formation of a coloured complex produced by the reaction of copper (I) with 2,9-dimethyl-1,10-phenanthroline (neocuproine), after reduction of copper (II) to copper (I) by reducing sugars. In the present SI system, a dialysis unit was incorporated not only to allow the sample dilution, but also to minimise the interference of some coloured compounds. In this way, direct sample introduction into the system was possible, without any previous treatment of the wine samples. The proposed method can be applied to the determination of reducing sugars in two concentration ranges: from 2 to 25 g l(-1) (table wines) and from 20 to 140 g l(-1) (Port wines). To perform determinations in these two ranges, the manifold configuration remained the same; just a few operational parameters were changed in the controlling software. A sampling-rate of 14-18 samples per hour was obtained with good repeatability for ten consecutive injections of wine samples (relative standard deviations (RSD) <2.1%). The results obtained from 19 wine samples were comparable to those obtained by the reference method.

Potentiometric determination of urea by sequential injection using Jack bean meal crude extract as a source of urease.

A sequential injection system was proposed to accomplish the potentiometric determination of urea. This procedure used an ammonium tubular selective electrode to assess ammonium concentration produced by enzymatic hydrolysis of urea from Jack bean meal (Canavalia ensiformis DC) crude extract. A gaseous diffusion device was coupled to the flow set-up allowing on-line sampling and suitable selectivity for determinations. A detection limit of 6.0x10(-4) mol urea l(-1), a relative standard deviation of 1.9% (n=10) and a sampling rate of 20 samples h(-1) were observed when 172 Sumner units (SU) of urease and 900 mul of sample were used. Results agreeing with a comparative method were obtained by the proposed procedure and the use of the crude extract solution combined with the sequential injection approach improved the performance, producing reproducible results and low costs in comparison with procedures using commercial enzymes.

Monosegmented flow-analysis of serum cholesterol.

A monosegmented flow system is designed for enzymatic spectrophotometric determination of cholesterol in blood serum. The sample (4.5 microliters), enzymatic reagent (150 microliters) and an air plug (100 microliters) are simultaneously inserted into a carrier stream buffered to pH 7.4 (potassium dihydrogenphosphate). In order to avoid the step of air removal, a relocating detector was used. This system handles about 42 samples per hour, yielding precise results (R.S.D. usually < 3.0%). Sensitivity is 46 mAU 1/mmol (mAU stands for milliabsorbance units), being the method linear up to 10.3 mmol/l cholesterol. Accuracy was assessed by running 30 samples already analysed by a conventional procedure: no statistical difference between methods was found at the 95% confidence level.

Colorimetric determination of copper in aqueous samples using a flow injection system with a pre-concentration poly(ethylenimine) column.

A colorimetric flow injection-system for the determination of Cu(II) in waters based on complexation reaction with 4-(2-pyridylazo)-resorcinol, usually termed PAR, is described. Performing measurements in 0.25 mol l(-1) HNO(3) medium allowed improved selectivity of the analytical method. The lack of sensitivity deriving from the low complex absorption under acidic conditions was balanced by the insertion of an immobilised poly(ethylenimine) (PEI) column where Cu(II) pre-concentration in neutral media occurs. Using sample volumes ranging from 2 to 4 ml, sampling rates of 24 and 12 samples h(-1) within a detection limit of 25 and 13 mug l(-1), respectively, were accomplished. Accuracy of the developed methodology was assessed by comparison with atomic absorption spectrometry being the relationship [FIA] mg l(-1)=1.00 (+/-0.03)x[AAS] mg l(-1)+0.00 (+/-0.02) obtained after analysing 15 samples. Precision was also evaluated using two samples of 0.05 and 0.5 mg l(-1) copper, and a relative standard deviation (R.S.D.) better than 3% was attained for both.