RESUMEN
A high Q/V mid-infrared 1D photonic crystal cavity in chalcogenide glass AMTIR-1 (Ge33As12Se55) resonating at λR=5.26 µm has been proposed as a key element of a sensor able to evaluate the nitric oxide (NO) concentration in the exhaled breath, namely fraction exhaled NO. The cavity design has been carried out through 3D finite-element method simulations. A Q-factor of 1.1×104 and a mode volume V=0.8 (λ/n)3, corresponding to a Q/V ratio of 1.4×104(λ/n)-3, have been obtained with a resonance transmission coefficient T=15%. A sensitivity of 10 ppb has been calculated with reference to the photothermal physical property of the material. Such a result is lower than the state-of-the-art of NO sensors proposed in literature, where hundreds of parts per trillion-level detection seem to have been achieved, but comparable with the performance obtained by commercial devices. The main advantages of the new device are in terms of footprint (=150 µm2), smaller at least 1 order of magnitude than those in literature, fast response time (only few seconds), and potential low cost. Such properties make possible in a handheld device the sensor integration in a multi-analysis system for detecting the presence of several trace gases, improving prevention, and reducing the duration of drug treatment for asthma and viral infections.
RESUMEN
Speed manipulation of optical pulses is a very attractive research challenge enabling next-generation high-capacity all-optical communication networks. Pulses can be effectively slowed by using different integrated optical structures such as coupled-resonator waveguiding structures or photonic crystal cavities. Fast light generation by means of integrated photonic devices is currently a quite unexplored research field in spite of its crucial importance for all-optical pulse processing. In this paper, we report on the first theoretical demonstration of fast light generation in an ultra-compact double vertical stacked ring resonator coupled to a bus waveguide. Periodic coupling between the two rings leads to splitting and recombining of symmetric and anti-symmetric resonant modes. Re-established degenerate modes can form when a symmetric and an anti-symmetric mode having different resonance order exhibit the same resonance wavelength. Under degenerate mode conditions, wide wavelength ranges where the group velocity is negative or larger than the speed of light in vacuum are generated. The paper proves how this physical effect can be exploited to design fast light resonant devices. Moreover, conditions are also derived to obtain slow light operation regime.
RESUMEN
The parametric analysis of the electromagnetic properties of 2D guided wave photonic band gap structures is reported with the aim of providing a valid tool for the optimal design. The modelling approach is based on the Bloch-Floquet method. Different lattice configurations and geometrical parameters are considered. An optimum value for the ratio between the hole (or rod) radius and the lattice constant does exist and the calculation demonstrated that it is almost independent from the etching depth, only depending on the lattice type. The results are suitable for the design optimisation of photonic crystal reflectors to be used in integrated optical devices.
RESUMEN
We present the theoretical investigation, design, and simulation of a novel guided-wave optical processor for L-band-transmission beam forming in a linear array of phased active antennas. The proposed configuration includes two contradirectional surface acoustic-wave transducers, and it is based on a Y-cut, X-propagating Ti:LiNbO(3) planar waveguide supporting the lowest-order modes of both polarizations (TE(0) and TM(0)) at the free-space wavelength λ = 0.85 µm. A detailed comparison between the processor we propose and other optical and electronic architectures reported in the literature is carried out, exhibiting a number of significant advantages in terms of weight, total chip size, and power consumption, when the number of antenna elements is greater than 50.