RESUMEN
In biosynthesis multiple kinds of reactive intermediates are generated, transported, and reacted across different parts of organisms, enabling highly sophisticated synthetic reactions. Herein we report a convergent synthetic approach, which utilizes dual intermediates of cationic and carbanionic species in a single step, hinted at by the ideal reaction conditions. By reactions of unsaturated precursors, such as enamines, with a superacid in a flow microreactor, cationic species, such as iminium ions, are generated rapidly and irreversibly, and before decomposition, they are transported to react with rapidly and independently generated carbanions, enabling direct C-C bond formation. Taking advantage of the reactivity of these double reactive intermediates, the reaction take place within a few seconds, enabling synthetic reactions which are not applicable in conventional reactions.
RESUMEN
C-glycosides are versatile scaffolds for drugs and bioactive compounds. The common organolithium-based synthesis of C-glycosides is limited by low reaction temperatures and a restricted substrate scope. To address these issues, a flow microreactor (FMR) was utilized for rapid mixing and precise temperature control, enabling C-glycoside synthesis at temperatures up to 40 °C and expanding the substrate scope. Continuous C-glycoside synthesis was achieved with a throughput of 21.9 g h-1, demonstrating the industrial potential of FMRs.
RESUMEN
Invited for the cover of this issue is the group of Aiichiro Nagaki, Yosuke Ashikari and co-workers at Hokkaido University. The image depicts flash monitoring of reactive intermediate in a flow microreactor. Read the full text of the article at 10.1002/chem.202303774.
RESUMEN
The direct observation of reactive intermediates is an important issue for organic synthesis. However, intermediates with an extreme instability are hard to be monitored by common spectroscopic methods such as FTIR. We have developed synthetic method utilizing flow microreactors, which enables a generation and reactions of unstable intermediates. Herein we report that, based on our flowmicro techniques, we developed an in-line analysis method for reactive intermediates in increments of milliseconds. We demonstrated the direct observation of the living and dead species of the anionic polymerization of alkyl methacrylates. The direct information of the living species enabled the anionic polymerization and copolymerization of oligo(ethylene glycol) methyl ether methacrylates, which is the important but difficult reaction in the conventional method.
RESUMEN
In this study, incorporation of one deuterium atom was achieved by H-D exchange of one of the two identical methylene protons in various dihalomethanes (halogen=Cl, Br, and I) through a rapid-mixing microflow reaction of lithium diisopropylamide as a strong base and deuterated methanol as a deuteration reagent. Generation of highly unstable carbenoid intermediate and suppression of its decomposition were successfully controlled under high flow-rate conditions. Monofunctionalization of diiodomethane afforded various building blocks composed of boryl, stannyl, and silyl groups. The monodeuterated diiodomethane, which served as a deuterated C1 source, was subsequently subjected to diverted functionalization methods to afford various products including biologically important molecules bearing isotope labelling at specific positions and homologation products with monodeuteration.
RESUMEN
A chemoselectivity switchable microflow reaction was developed to generate reactive and unstable intermediates. The switchable chemoselectivity of this reaction enables a selection for one of two different intermediates, an aryllithium or a benzyl lithium, at will from the same starting material. Starting from bromo-substituted styrenes, the aryllithium intermediates were converted to the substituted styrenes, whereas the benzyl lithium intermediates were engaged in an anionic polymerization. These chemoselectivity-switchable reactions can be integrated to produce polymers that cannot be formed during typical polymerization reactions.
RESUMEN
The dopaminergic system is essential for the function of the brain in health and disease. Therefore, detailed studies focused on unraveling the mechanisms involved in dopaminergic signaling are required. However, the lack of probes that mimic dopamine in living tissues, owing to the neurotransmitter's small size, has hampered analysis of the dopaminergic system. The current study aimed to overcome this limitation by developing alkyne-tagged dopamine compounds (ATDAs) that have a minimally invasive and uniquely identifiable alkyne group as a tag. ATDAs were established as chemically and functionally similar to dopamine and readily detectable by methods such as specific click chemistry and Raman scattering. The ATDAs developed here were verified as analogue probes that mimic dopamine in neurons and brain tissues, allowing the detailed characterization of dopamine dynamics. Therefore, ATDAs can act as safe and versatile tools with wide applicability in detailed studies of the dopaminergic system. Furthermore, our results suggest that the alkyne-tagging approach can also be applied to other small-sized neurotransmitters to facilitate characterization of their dynamics in the brain.
Asunto(s)
Alquinos , Dopamina , Neuronas Dopaminérgicas , Espectrometría RamanRESUMEN
In spite of their potential utility, the chemistry of dimetalated arenes is still in its infancy because they are extremely difficult to synthesize. We report a novel method of synthesizing arenes bearing a boryl group and a metallic substituent, such as boryl, silyl, stannyl, or zincyl groups, in an integrated flow microreactor based on the generation and reactions of aryllithiums bearing a trialkyl borate moiety. The bimetallic arenes showed a remarkable chemoselectivity in palladium-catalyzed cross-coupling reactions. The selectivity was switched by the selection of the metal species that constitutes the dimetalated arenes as well as appropriate catalysts.
RESUMEN
A novel straightforward method for aryl azides having functional groups based on generation and reactions of aryllithiums bearing a triazene group from polybromoarenes using flow microreactor systems was achieved. The present approach will serve as a powerful method in organolithium chemistry and open a new possibility in the synthesis of polyfunctional organic azides.
RESUMEN
The present study describes the cationic oxo-thiolation of polymerizable alkenes by using highly reactive cationic species generated by anodic oxidation. These highly reactive cations were able to activate alkenes before their polymerization. Fast mixing in flow microreactors effectively controlled chemoselectivity, enabling higher reaction temperatures.
RESUMEN
Electrochemical oxidation of toluene derivatives in the presence of N-tosyldiphenylsulfilimine gave the corresponding benzylaminosulfonium ions, which were treated with tetrabutylammonium iodide under non-electrolytic conditions to give N-tosylbenzylamines. The transformation serves as a metal- and chemical-oxidant-free method for benzylic C-H amination. Because of high oxidation potential of N-tosyldiphenylsulfilimine the present method can be applied to synthesis of various benzylamines from functionalized toluene derivatives.
RESUMEN
ß-Haloalkoxysulfonium ions generated by the reaction of electrogenerated Br(+) and I(+) ions stabilized by dimethyl sulfoxide (DMSO) reacted with sodium hydroxide and sodium methoxide to give the corresponding halohydrins and epoxides, respectively, whereas the treatment with triethylamine gave α-halocarbonyl compounds.
RESUMEN
Halogen and chalcogen cations (X(+) = Br(+), I(+), ArS(+), and ArSe(+)) were generated by low-temperature electrochemical oxidation in the presence of dimethyl sulfoxide (DMSO) and were accumulated in the solution. DFT calculations indicated that DMSO stabilizes these cations by coordination. The complexes of I(+) with one and two DMSO molecules were observed by cold-spray-ionization MS analyses. The stability of the resulting cation pools of X(+) increased in the order of Br(+) < I(+) < ArS(+) < ArSe(+), which could be explained in terms of the electronegativity of X. The cation pools served as versatile reagents for organic synthesis; the reactions with alkenes gave ß-X-substituted alkoxysulfonium ions, which were converted to the corresponding carbonyl compounds by the treatment with triethylamine, whereas the treatment with methanol gave the corresponding alcohols. The reactions with aminoalkenes and 1,6-dienes gave the cyclized products.
Asunto(s)
Alquenos/química , Cationes/química , Calcógenos/química , Dimetilsulfóxido/química , Halógenos/química , Cristalografía por Rayos X , Electroquímica , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Conformación Molecular , Oxidación-Reducción , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
An integration of electrooxidative cyclization and chemical oxidation was achieved. Electrochemical oxidation of alkenes having a nucleophilic moiety in the presence of DMSO gave cyclized alkoxysulfonium ions, which were converted to the corresponding ketones by treatment with triethylamine in a one-pot sequential manner. The method is also an effective tool for cyclization of 1,6-dienes affording five-membered ring diketones in high stereoselectivity.
Asunto(s)
Alquenos/química , Cetonas/síntesis química , Compuestos de Sulfhidrilo/química , Ciclización , Técnicas Electroquímicas , Iones/química , Cetonas/química , Estructura Molecular , Oxidación-ReducciónRESUMEN
Oxidative hydroxylation of toluene derivatives via alkoxysulfonium ion intermediates was achieved by integration of anodic oxidation and hydrolysis to give benzyl alcohols which are also susceptible to oxidation. Alkenes were also oxidized to give 1,2-diols without overoxidation. The integration of electrochemical oxidative cyclization and hydrolysis was achieved using alkenes bearing a nitrogen atom in an appropriate position to give cyclic ß-amino-substituted alcohols.
RESUMEN
Generation of carbocations by the "cation pool" method followed by reaction with dimethyl sulfoxide (DMSO) gave the corresponding alkoxysulfonium ions. Alkoxysulfonium ions could also be generated by in situ DMSO trapping of electrochemically generated carbocations. The resulting alkoxysulfonium ions were transformed into carbonyl compounds by treatment with triethylamine. The present integrated electrochemical-chemical oxidation can be applied to the oxidation of diarylmethanes to diaryl ketones, toluenes to benzaldehydes, and aryl-substituted alkenes to 1,2-diketones. Moreover, the oxidation of unsaturated compounds bearing a nucleophilic group in an appropriate position gives cyclized carbonyl compounds.