Impact of titanium dioxide (TiO2) nanoparticle and liquid leachate of mushroom compost on agronomic and biochemical response of marigold (Tagetes erecta L.) under saline stress.

The cultivation of ornamental horticultural crops under salinity stress has been a challenge for growers all over the world. In this study, an attempt was made for pot cultivation of Marigold (Tagetes erecta L. var. Pusa Basanti Gainda) in salt-stressed (SS) soil (150 mM) with the combined use of mushroom compost leachate (CL) and foliar application of titanium dioxide nanoparticles (TiO2-NPs). For this purpose, a total of six pot treatments, i.e., borewell water (BW; control), T1 (BW with SS), T2 (BW with SS and TiO2-NPs), T3 (CL supplemented), T4 (CL with SS), and T5 (CL with SS and TiO2-NPs) were conducted in triplicate. The results of this study showed that CL supplementation significantly (p < 0.05) improved the physicochemical i.e., pH (14.5%), electrical conductivity (32.9%), total nitrogen (27.4%), total phosphorus (247.6%)), and nutrient (organic matter: 119.6%) profiles of soil which later helped in higher growth (30-35%) and yield (5.4-40.7%) of T. erecta. In CL-based treatments, the biochemical constituents were significantly (p < 0.05) higher than those in BW-irrigated ones. Also, the levels of selected stress defense enzymes were significantly increased under SS treatment but reduced under TiO2-NP application. Overall, it was observed that the combined application of CL and TiO2-NPs (T5 treatment) was the most helpful treatment for enhanced germination, growth, yield, biochemical parameters, and better plant enzymatic activities to cope with saline stress. This study provides a mechanistic understanding of T. erecta plants under saline stress which is crucial for the development of targeted interventions aimed at improving plant tolerance to saline conditions.

Birds and environment: a multidisciplinary approach to ecological, behavioural and conservation issues.

Birds perform significant ecosystem services in the environment. Nevertheless, they have been facing threats to their survival globally. This special collection assembles diverse articles on various aspects of birds' life, their interactions with the environment, their adaptations, and threats they have been facing along with conservation measures.

Synthesis of carboxylated cellulose nanocrystal/ZnO nanohybrids using Oxytenanthera abyssinica cellulose and zinc nitrate hexahydrate for radical scavenging, photocatalytic, and antibacterial activities.

The extremely low antioxidant, photocatalytic, and antibacterial properties of cellulose limit its application in the biomedical and environmental sectors. To improve these properties, nanohybrides were prepared by mixing carboxylated cellulose nanocrystals (CCNCs) and zinc nitrate hexahydrate. Data from FTIR, XRD, DLS, and SEM spectra showed that, ZnO nanoparticles, with a size ranging from 94 to 351 nm and the smallest nanoparticle size of 164.18 nm, were loaded onto CCNCs. CCNCs/ZnO1 nanohybrids demonstrated superior antibacterial, photocatalytic, and antioxidant performance. More considerable antibacterial activity was shown with a zone of inhibition ranging from 26.00 ± 1.00 to 40.33 ± 2.08 mm and from 31.66 ± 3.51 to 41.33 ± 1.15 mm against Gram-positive and Gram-negative bacteria, respectively. Regarding photodegradation properties, the maximum value (∼91.52 %) of photocatalytic methylene blue degradation was observed after 75 min exposure to a UV lamp. At a concentration of 125.00 µm/ml of the CCNC/ZnO1 nanohybrids sample, 53.15 ± 1.03 % DPPH scavenging activity was obtained with an IC50 value of 117.66 µm/ml. A facile, cost-effective, one-step synthesis technique was applied to fabricate CCNCs/ZnO nanohybrids at mild temperature using Oxytenanthera abyssinica carboxylated cellulose nanocrystals as biotemplate. The result showed that CCNCs/ZnO nanohybrids possess potential applications in developing advanced functional materials for dye removal and antibacterial and antioxidant applications.

Biosynthesis and assessment of antibacterial and antioxidant activities of silver nanoparticles utilizing Cassia occidentalis L. seed.

This research explores the eco-friendly synthesis of silver nanoparticles (AgNPs) using Cassia occidentalis L. seed extract. Various analytical techniques, including UV-visible spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive X-ray spectroscopy (EDX), were employed for comprehensive characterization. The UV-visible spectra revealed a distinct peak at 425 nm, while the seed extract exhibited peaks at 220 and 248 nm, indicating the presence of polyphenols and phytochemicals. High-resolution TEM unveiled spherical and oval-shaped AgNPs with diameters ranging from 6.44 to 28.50 nm. The SEM exhibiting a spherical shape and a polydisperse nature, thus providing insights into the morphology of the AgNPs. EDX analysis confirmed the presence of silver atoms at 10.01% in the sample. XRD results unequivocally confirm the crystalline nature of the AgNPs suspension, thereby providing valuable insights into their structural characteristics and purity. The antioxidant properties of AgNPs, C. occidentalis seed extract, and butylated hydroxytoluene (BHT) were assessed, revealing IC50 values of 345, 500, and 434 µg/mL, respectively. Antibacterial evaluation against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli demonstrated heightened sensitivity of bacteria to AgNPs compared to AgNO3. Standard antibiotics, tetracycline, and ciprofloxacin, acting as positive controls, exhibited substantial antibacterial efficacy. The green-synthesized AgNPs displayed potent antibacterial activity, suggesting their potential as a viable alternative to conventional antibiotics for combating pathogenic bacterial infections. Furthermore, potential biomedical applications of AgNPs were thoroughly discussed.

Experimental investigations on PVA/chitosan and PVA/chitin films for active food packaging using Oxytenanthera abyssinica lignin nanoparticles and its UV-shielding, antimicrobial, and antiradical effects.

This study investigated the effect of adding lignin nanoparticles (LNPs) derived from Oxytenanthera abyssinica via alkali-acid nanoprecipitation method to polyvinyl alcohol/chitosan (PVA/CI) and polyvinyl alcohol/chitin (PVA/CH) films for the active food packaging applications. Adding LNPs at concentrations of 1 % and 3 % improved the films' thermal stability and mechanical properties. The lowest water solubility and moisture content were observed in PVA/CI/LNPs films. LNPs exhibited effective 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities, with the highest values observed in PVA/CH/LNPS and PVA/CI/LNPS films with values of 87.47 and 88.74 % respectively. The addition of LNPs also improved the UV-blocking abilities of the films. PVA/CH/LNP3 and PVA/CI/LNP3 have the smallest percentage transmission values of 3.34 % and 0.86 % in the UV range. The overall migration of dietary stimulants was lower in PVA/CI/LNPS and PVA/CH/LNPS films compared to PVA film. Antibacterial tests demonstrated the inhibitory capacity of the synthesized biofilms against both gram-positive and negative bacterial species, with the highest inhibitory value of 26 mm. The study suggests that PVA/CH/LNPS and PVA/CI/LNPS films have potential applications as active food packaging materials and can be explored in other potential applications such as drug delivery, tissue engineering, wound healing, and slow-release urea fertilizer development.

Plants and Plant-Derived Molecules as Natural Immunomodulators.

Background. Nowadays, the immunomodulatory properties of plants have been studied extensively with greater interest due to increasing awareness and combating the severity of immunomodulatory diseases. Scope and Approach. This paper highlights the efficacy of the available literature evidence on natural immunomodulators of plant origin and synthetic ones. In addition, several aspects of plants and their phytoconstituents responsible for immunomodulation have been discussed. Moreover, this review also discusses the mechanism involved in immunomodulation. Key Findings. One hundred fifty medicinal immunomodulatory plants are currently identified to find novel immunomodulatory drugs. Of these plants, the plant family Asteraceae also takes the first rank by offering 18 plant species (12%). Similarly of the plants studied so far, 40% belong to the Asteraceae family. Echinacea purpurea of this family is most known for its immunostimulating activity. The most prominent immune-active bioactive molecules are polyphenols, terpenoids, and alkaloids. Also, eight plant bioactive immunomodulators were checked for clinical trials and found in the market. These are six immunosuppressants, resveratrol, epigallocatechin-3-gallate, quercetin, colchicine, capsaicin, and andrographolide, and two immunostimulants, curcumin and genistein. Nowadays, there are a lot of polyherbal traditional medicinal products sold in the market and claimed to their immunomodulators. However, much work is still needed to find more active immunomodulatory agents. The mechanism by which immunomodulatory medicinal plant exert their effect is through the induction of cytokines and phagocyte cells and the inhibition of iNOS, PGE, and COX-2 synthesis.

Targeted HPTLC Profile, Quantification of Flavonoids and Phenolic Acids, and Antimicrobial Activity of Dodonaea angustifolia (L.f.) Leaves and Flowers.

In East Africa, Dodonaea angustifolia (L.f.) is a well-known medicinal herb. Its leaf is primarily studied in light of its ethnobotanical use. In terms of phytochemistry and biological activity, its flower is not studied. In a prior study, our team looked into phytochemical screening, antioxidant activity, and total phenolic levels. This study aims to compare the profiles and biological activities of the leaf and flower samples of D. angustifolia and to present therapeutic alternatives. The leaf and flower sample powders were extracted with methanol using ultrasound-assisted extraction (UAE). HPTLC profile was obtained using CAMAG-HPTLC equipped with VisionCATS software. Antimicrobial agar well diffusion assay and minimum inhibition concentration (MIC) were determined. The leaf and flower extracts of D. angustifolia showed antibacterial activity with a MIC value of 20 µg/mL against Enterococcus faecalis and Listeria monocytogenes. Similarly, 40 µg/mL was found to be effective against Aspergillus flavus. D. angustifolia flower is a rich source of flavonoids and phenolic acids. Because of its antibacterial properties and profile, which are almost the same, the flower is emerging as a viable option for medicinal alternatives.

Agricultural Residues as Raw Materials for Pulp and Paper Production: Overview and Applications on Membrane Fabrication.

The need for pulp and paper has risen significantly due to exponential population growth, industrialization, and urbanization. Most paper manufacturing industries use wood fibers to meet pulp and paper requirements. The shortage of fibrous wood resources and increased deforestation are linked to the excessive dependence on wood for pulp and paper production. Therefore, non-wood substitutes, including corn stalks, sugarcane bagasse, wheat, and rice straw, cotton stalks, and others, may greatly alleviate the shortage of raw materials used to make pulp and paper. Non-woody raw materials can be pulped easily using soda/soda-AQ (anthraquinone), organosolv, and bio-pulping. The use of agricultural residues can also play a pivotal role in the development of polymeric membranes separating different molecular weight cut-off molecules from a variety of feedstocks in industries. These membranes range in applications from water purification to medicinal uses. Considering that some farmers still burn agricultural residues on the fields, resulting in significant air pollution and health issues, the use of agricultural residues in paper manufacturing can eventually help these producers to get better financial outcomes from the grown crop. This paper reviews the current trends in the technological pitch of pulp and paper production from agricultural residues using different pulping methods, with an insight into the application of membranes developed from lignocellulosic materials.

Flavonoids and Phenolic Acids from Aerial Part of Ajuga integrifolia (Buch.-Ham. Ex D. Don): Anti-Shigellosis Activity and In Silico Molecular Docking Studies.

Shigellosis is one of the major causes of death in children worldwide. Flavonoids and phenolic acids are expected to demonstrate anti-shigellosis activity and anti-diarrheal properties. The aerial part of A. integrifolia is commonly used against diarrhea. This study aimed to identify flavonoids and phenolic acids responsible for this therapeutic purpose. Antioxidant activity, total phenol content, and total flavonoid content were determined. The antibacterial activity of the aerial part against Shigella spp. was also tested using the agar well diffusion method. HPLC analysis was performed using UHPLC-DAD for different extracts of the aerial part. Autodock Vina in the PyRx platform was used to screen responsible components. Ciprofloxacin was used as a reference drug. An enzyme taking part in pyrimidine biosynthesis was used as a target protein. Molecular docking results were visualized using Discovery Studio and LigPlot1.4.5 software. Antioxidant activity, total phenol content, and total flavonoid content are more significant for the aerial part of A. integrifolia. From HPLC analysis, the presence of the flavonoids, quercetin, myricetin, and rutin and the phenolic acids gallic acid, chlorogenic acid, and syringic acid were identified from the aerial part of A. integrifolia. Regarding the antibacterial activity, the aerial part shows considerable activity against Shigella spp. Binding energies, RMSD and Ki values, interaction type, and distance are considered to identify the components most likely responsible for the therapeutic effects and observed activity. Antioxidant activity, total phenol content, and total flavonoid content of the aerial part are in line with anti-shigellosis activity. The top five components that are most likely potentially responsible for therapeutic purposes and anti-shigellosis activity are chlorogenic acid, rutin, dihydroquercetin, dihydromyricetin, and kaempferol.

Risk Assessment of Heavy Metals Occurrence in Two Wild Edible Oyster Mushrooms (Pleurotus spp.) Collected from Rajaji National Park.

This study aimed at assessing the concentration of six heavy metals (Cd, Cr, Cu, Fe, Mn, and Zn) in two wild edible oyster mushrooms (Pleurotus ostreatus and Pleurotus djamor) collected from Rajaji National Park in Haridwar, India. For this purpose, mushroom samples were collected from selected locations (forest, residential, tourist, industrial areas, and transportation activities) from June 2021 to July 2022 and subsequently analyzed for selected heavy metals using atomic absorption spectroscopy (AAS). Results showed that both Pleurotus spp. had significantly varying (p < 0.05) concentrations of heavy metals. However, P. ostreatus showed relatively higher concentration levels of these metals compared to P. djamor. The mean concentrations (mg/kg dry weight) of the Cd, Cr, Cu, Fe, Mn, and Zn in P. ostreatus and P. djamor were 0.10 and 0.08, 0.87 and 0.64, 16.19 and 14.77, 28.49 and 27.15, 9.93 and 8.73, and 18.15 and 15.76, respectively. As indicated by the multivariate analysis tools i.e., principal component analysis (PCA) and hierarchical cluster analysis (HCA), the locations near the residential, industrial, and transportation activities had higher concentration levels of heavy metals. Moreover, the health risk studies using the target hazard quotient (THQ < 1) showed no significant health risk as the consumption of both Pleurotus spp., except for at one location, had high-traffic activities. The findings of this study provide vital information about the occurrence of potentially toxic heavy metals in wild edible Pleurotus spp. in Rajaji National Park in Haridwar, India representing a safeguard for mushroom consumers.

Occurrence and Health Risk Assessment of Cadmium Accumulation in Three Tricholoma Mushroom Species Collected from Wild Habitats of Central and Coastal Croatia.

This study deals with the biomonitoring of cadmium (Cd) heavy metal in the three selected Tricholoma mushroom species collected from wild habitats of central and coastal Croatia. For this, mushroom (T. columbetta: n = 38, T. portentosum: n = 35, and T. terreum: n = 34) and surface soil samples were collected from nine forest localities of Croatia and analyzed for Cd concentration using inductively coupled plasma−optical emission spectrometry (ICP−OES) through the acid digestion method. The findings revealed that Cd was present in Tricholoma spp. and surface soil. However, the maximum mean Cd concentration (mg/kg dry weight) was recorded in T. portentosum (cap: 0.98; stipe: 0.72), followed by T. columbetta (cap: 0.96; stipe: 0.73) and T. terreum (cap: 0.81; stipe: 0.63). The bioconcentration factor (BCF) value (>1) revealed that the selected Tricholoma spp. had the potential for Cd accumulation. Moreover, the principal component (PC) and hierarchical cluster (HC) analyses were used to derive the interactions and similarities between Cd levels Tricholoma spp. and sampling localities. The multivariate analysis suggested that central sampling localities had higher Cd levels as compared to coastal localities. However, the daily intake of metals (DIM < 0.426) and health risk index (HRI < 1) showed that there was no potential health risk associated with the consumption of selected Tricholoma spp. The findings of this study are helpful to understand the Cd accumulation behavior of wild edible Tricholoma spp. collected from Croatia.

Prevention and Treatment of Cardiovascular Diseases with Plant Phytochemicals: A Review.

Cardiovascular diseases (CVDs) are the world's leading killers, accounting for 30% deaths. According to the WHO report, CVDs kill 17.9 million people per year, and there will be 22.2 million deaths from CVD in 2030. The death rates rise as people get older. Regarding gender, the death rate of women by CVD (51%) is higher than that of men (42%). To decrease and prevent CVD, most people rely on traditional medicine originating from the plant (phytochemicals) in addition to or in preference to commercially available drugs to recover from their illness. The CVD therapy efficacy of 92 plants, including 15 terrestrial plants, is examined. Some medicinal plants well known to treat CVD are, Daucus carota, Nerium oleander, Amaranthus Viridis, Ginkgo biloba, Terminalia arjuna, Picrorhiza kurroa, Salvia miltiorrhiza, Tinospora cordifolia, Mucuna pruriens, Hydrocotyle asiatica, Bombax ceiba, and Andrographis paniculate. The active phytochemicals found in these plants are flavonoids, polyphenols, plant sterol, plant sulphur compounds, and terpenoids. A general flavonoid mechanism of action is to prevent low-density lipoprotein oxidation, which promotes vasodilatation. Plant sterols prevent CVD by decreasing cholesterol absorption in the blood. Plant sulphur compound also prevent CVD by activation of nuclear factor-erythroid factor 2-related factor 2 (Nrf2) and inhibition of cholesterol synthesis. Quinone decreases the risk of CVD by increasing ATP production in mitochondria while terpenoids by decreasing atherosclerotic lesion in the aortic valve. Although several physiologically active compounds with recognized biological effects have been found in various plants because of the increased prevalence of CVD, appropriate CVD prevention and treatment measures are required. More research is needed to understand the mechanism and specific plants' phytochemicals responsible for treating CVD.

Spatial Assessment of Potentially Toxic Elements (PTE) Concentration in Agaricus bisporus Mushroom Collected from Local Vegetable Markets of Uttarakhand State, India.

This study presents a spatial assessment of eight potentially toxic elements (PTE: Cd, Cr, Cu, Fe, Pb, Ni, Mn, and Zn) in white button (Agaricus bisporus J.E. Lange) mushroom samples collected from the local vegetable markets of Uttarakhand State, India. Fresh A. bisporus samples were collected from thirteen districts and fifteen sampling locations (M1-M15) and analyzed for the concentration of these PTE using atomic absorption spectroscopy (AAS). The results revealed that A. bisporus contained all eight selected PTE in all sampling locations. Based on the inverse distance weighted (IDW) interpolation, principal component (PC), and hierarchical cluster (HC) analyses, the areas with a plane geographical distribution showed the highest PTE concentrations in the A. bisporus samples as compared to those in hilly areas. Overall, the decreasing order of PTE concentration in A. bisporus was recognized as Fe > Zn > Mn > Cr > Cu > Ni > Cd > Pb. The Kruskal−Wallis ANOVA tests displayed a highly significant (p < 0.05) difference among the sampling locations. However, the concentration of PTE was below permissible limits, indicating no potential hazard in consuming the A. bisporus. Similarly, the health risk assessment studies using the target hazard quotient (THQ) also showed no significant health risk associated with the consumption of A. bisporus being sold in the local mushroom markets of Uttarakhand, India. This study is the first report on state-level monitoring of PTE in A. bisporus mushrooms, which provides crucial information regarding the monitoring and occurrence of potentially toxic metallic elements.

Sustainable Use of Sewage Sludge as a Casing Material for Button Mushroom (Agaricus bisporus) Cultivation: Experimental and Prediction Modeling Studies for Uptake of Metal Elements.

The present study focused on the use of sewage sludge (SS) as a casing material amendment and the potential uptake of metal elements by the cultivated white button (Agaricus bisporus: MS-39) mushroom. Laboratory experiments were performed under controlled environmental conditions to grow A. bisporus on the composted wheat straw substrate for 50 days. Different treatments (0, 50, 100, 150, and 200 g/kg) of casing material were prepared by mixing garden and dried SS and applied on the mushroom substrate after proper sterilization. The results revealed that SS application was significant (p < 0.05) in accelerating mushroom yield with a biological efficiency of 65.02% for the mixing rate of 200 g/kg. Moreover, the maximum bioaccumulation of selected metal elements (Cu, Cr, Cd, Fe, Mn, and Zn) was observed using the same treatment. Additionally, the multiple regression models constructed for the uptake prediction of metal elements showed an acceptable coefficient of determination (R2 > 0.9900), high model efficiency (ME > 0.98), and low root mean square error (RMSE < 0.410) values, respectively. The findings of this study represent sustainable use of SS for the formulation of mushroom casing material contributing toward synergistic agro-economy generation and waste management.

Traditional and Phytochemical Bases of Herbs, Shrubs, Climbers, and Trees from Ethiopia for Their Anticancer Response.

Ethiopia is one of Africa's six plant-rich countries, with around 60% of the plants being indigenous and most of them having medicinal properties. 80% of people in the country use these plants as a primary health care system to tackle different diseases, including cancer. This review is aimed at summarizing the evidence gained from diverse MPs in Ethiopia that have been used ethnobotanically and ethnopharmacologically for treatment of cancer. The primary data sources were Google Scholar, Web of Science, Science Direct, Scopus, PubMed, and other electronic scientific databases. This literature review showed that there are around 200 MPs used as anticancer. Seventy-four herbs, 39 trees, 77 shrubs, and 17 weed/climbers belonging to 56 families have been identified for their ethnobotanical anticancer potential, and 31 species were recognized for their pharmaceutically anticancer activities. The reviewed data also indicated that many Ethiopian MPs had been used to treat breast, lung, blood, and skin cancers and other tumors. Besides, the collected data showed that the leaves (36.76%), roots (27.2%), bark (12.5%), stem (5.1%), and fruit (7.35%) of plants are commonly used for the preparation of anticancer remedies. Among the reported plant species, Euphorbiaceae (10.71%), Acanthaceae (7.14%), and Asteraceae (7.1%) are the most prominent plant families being used to treat cancer ethnobotanically. Phytochemicals such as flavonoids (like xanthone, indirubin, flavopiridol, and silybin), alkaloids (like taxol, vincristine, evodiamine, and berberine), and physalin B, D, and F steroids exhibited anticancer activity on various cancer cell lines. The crude extracts of Aerva javanica, Vernonia leopoldi, Withania somnifera, Kniphofia foliosa, and Catharanthus roseus were powerful anticancer agents with an IC50 value below 10 µg/mL. Although several Ethiopian plants possess anticancer potential, only a limited number of plants are scientifically studied. Therefore, more scientific studies on anticancer MPs should be carried out; it may lead to discovering and isolating cost-effective and safe anticancer drugs.

A safe haven of SARS-CoV-2 in the environment: Prevalence and potential transmission risks in the effluent, sludge, and biosolids.

The novel coronavirus, SARS-CoV-2, which has caused millions of death globally is recognized to be unstable and recalcitrant in the environment, especially in the way it has been evolving to form new and highly transmissible variants. Of particular concerns are human-environment interactions and the handling and reusing the environmental materials, such as effluents, sludge, or biosolids laden with the SARS-CoV-2 without adequate treatments, thereby suggesting potential transmission and health risks. This study assesses the prevalence of SARS-CoV-2 RNA in effluents, sludge, and biosolids. Further, we evaluate the environmental, ecological, and health risks of reusing these environmental materials by wastewater/sludge workers and farmers. A systematic review of literature from the Scopus database resulted in a total of 21 articles (11 for effluents, 8 for sludge, and 2 for biosolids) that met the criteria for meta-analysis, which are then subdivided into 30 meta-analyzed studies. The prevalence of SAR-CoV-2 RNA in effluent and sludge based on random-effect models are 27.51 and 1012.25, respectively, with a 95% CI between 6.14 and 48.89 for the effluent, and 104.78 and 1019.71 for the sludge. However, the prevalence of SARS-CoV-2 RNA in the biosolids based on the fixed-effect model is 30.59, with a 95% CI between 10.10 and 51.08. The prevalence of SARS-CoV-2 RNA in environmental materials indicates the inefficiency in some of the treatment systems currently deployed to inactivate and remove the novel virus, which could be a potential health risk concern to vulnerable wastewater workers in particular, and the environmental and ecological issues for the population at large. This timely review portends the associated risks in handling and reusing environmental materials without proper and adequate treatments.

Biogenic fabrication of nanomaterials from flower-based chemical compounds, characterization and their various applications: A review.

Nanotechnology is evolving as a significant discipline of research with various applications. It includes the materials and their applications having one dimension in the range of 1-100 nm. Many chemical and physical protocol have been utilized for the nanoparticles (NPs) fabrication. These protocols are costly, hazardous and consumes high energy. Thus, researchers are inclined towards biological synthesis of NPs using plant and or herbal extract as these methods are simple, sustainable, ecofriendly and cost-effective. Flower is an important part of plants, and contained several phytochemicals such as flavonoids, terpenoids, coumarins, sterol and xanthones which acts as an important precursor for NPs synthesis. These compounds acted as reducing as well as stablishing agent during fabrication processes. They have been thoroughly characterized by various techniques. The fabricated NPs have shown potential antimicrobial activity against bacterial and fungal infections. They have been also used as potential therapeutic agent for human breast cancer, gastric adenocarcinoma cell, colorectal adenocarcinoma cell and pancreas ductal adenocarcinoma cells. Overall, the aim of this review article to facilitates the recent understanding of flower-mediated NPs fabrication (a sustainable and ecofriendly resource), their application in different disciplines and challenges.