RESUMEN
Hydrogels, as flexible materials, have been widely used in the field of flexible sensors. Human sweat contains a variety of biomarkers that can reflect the physiological state of the human body. Therefore, it is of great practical significance and application value to realize the detection of sweat composition and combine it with human motion sensing through a hydrogel. Based on mussel-inspired chemistry, polydopamine (PDA) and gold nanoparticles (AuNPs) were coated on the surface of cellulose nanocrystals (CNCs) to obtain CNC-based nanocomposites (CNCs@PDA-Au), which could simultaneously enhance the mechanical, electrochemical, and self-healing properties of hydrogels. The CNCs@PDA-Au was composited with poly(vinyl alcohol) (PVA) hydrogel to obtain the nanocomposite hydrogel (PVA/CNCs@PDA-Au) by freeze-thaw cycles. The PVA/CNCs@PDA-Au has excellent mechanical strength (7.2 MPa) and self-healing properties (88.3%). The motion sensors designed with PVA/CNCs@PDA-Au exhibited a fast response time (122.9 ms), wide strain sensing range (0-600.0%), excellent stability, and fatigue resistance. With the unique electrochemical redox properties of uric acid, the designed hydrogel sensor successfully realized the detection of uric acid in sweat with a wide detection range (1.0-100.0 µmol/L) and low detection limit (0.42 µmol/L). In this study, the dual detection of human motion and uric acid in sweat was successfully realized by the designed PVA/CNCs@PDA-Au nanocomposite hydrogel.
Asunto(s)
Celulosa , Oro , Hidrogeles , Nanocompuestos , Polímeros , Sudor , Celulosa/química , Nanocompuestos/química , Humanos , Hidrogeles/química , Oro/química , Sudor/química , Polímeros/química , Nanopartículas del Metal/química , Alcohol Polivinílico/química , Nanopartículas/química , Indoles/química , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Límite de Detección , Movimiento (Física)RESUMEN
Cellulose nanocrystals (CNCs) have garnered significant attention as a modifiable substrate because of their exceptional performances, including remarkable degradability, high tensile strength, high elastic modulus, and biocompatibility. In this article, the successful adsorption of phytic acid (PA) onto the surface of cellulose nanocrystals @polydopamine (CNC@PDA) was achieved. Taking inspiration from mussels, a dopamine self-polymerization reaction was employed to coat the surface of CNCs with PDA. Utilizing Pickering emulsion, the CNC@PDA-PA nanomaterial was obtained by grafting PA onto CNC@PDA. An environmentally friendly hydrogel was prepared through various reversible interactions using poly(acrylic acid) (PAA) and Fe3+ as raw materials with the assistance of CNC@PDA-PA. By multiple hydrogen bonding and metal-ligand coordination, nanocomposite hydrogels exhibit remarkable mechanical properties (the tensile strength and strain were 1.82 MPa and 442.1%, respectively) in addition to spectacular healing abilities (96.6% after 5 h). The study aimed to develop an innovative approach for fabricating nanocomposite hydrogels with exceptional self-healing capabilities.
RESUMEN
For hydrogel-based flexible sensors, it is a challenge to enhance the stability at sub-zero temperatures while maintaining good self-healing properties. Herein, an anti-freezing nanocomposite hydrogel with self-healing properties and conductivity was designed by introducing cellulose nanocrystals (CNCs) and phytic acid (PA). The CNCs were grafted with polypyrrole (PPy) by chemical oxidation, which were used as the nanoparticle reinforcement phase to reinforce the mechanical strength of hydrogels (851.8%). PA as a biomass material could form strong hydrogen bond interactions with H2O molecules, endowing hydrogels with prominent anti-freezing properties. Based on the non-covalent interactions, the self-healing rate of the hydrogels reached 92.9% at -15 °C as the content of PA was 40.0 wt%. Hydrogel-based strain sensors displayed high sensitivity (GF = 0.75), rapid response time (350 ms), good conductivity (3.1 S m-1) and stability at -15 °C. Various human movements could be detected by using them, including small (smile and frown) and large changes (elbow and knee bending). This work provides a promising method for the development of flexible wearable sensors that work stably in frigid environments.
Asunto(s)
Nanopartículas , Polímeros , Humanos , Nanogeles , Ácido Fítico , Celulosa , Pirroles , HidrogelesRESUMEN
Photocatalytic oxidation desulfurization (PODS) has emerged as a promising, ecofriendly alternative to traditional, energy-intensive fuel desulfurization methods. Nevertheless, its progress is still hindered due to the slow sulfide oxidation kinetics in the current catalytic systems. Herein, we present a MoOx decorated on a Cu2O@CuO core-shell catalyst, which enables a new, efficient PODS pathway by in situ generation of hydrogen peroxide (H2O2) with saturated moist air as the oxidant source. The photocatalyst delivers remarkable specific activity in oxidizing dibenzothiophene (DBT), achieving a superior rate of 7.8 mmol g-1 h-1, while maintaining a consistent performance across consecutive reuses. Experimental investigations reveal that H2O2 is produced through the two-electron oxygen reduction reaction (ORR), and both H2O2 and the hydroxyl radicals (â¢OH) generated from it act as the primary reactive species responsible for sulfide oxidation. Importantly, our catalyst accomplishes complete PODS of real diesel fuel, underscoring an appealing industrial prospect for our photocatalyst.
RESUMEN
The detection of human motion and sweat composition are important for human health or sports training, so it is necessary to develop flexible sensors for monitoring exercise processes and sweat detection. Mussel secretion of adhesion proteins enables self-healing of byssus and adhesion to surfaces. We prepared Au nanoparticles@polydopamine (AuNPs@PDA) nanomaterials based on mussel-inspired chemistry and compounded them with polyvinyl alcohol (PVA) hydrogels to obtain PVA/AuNPs@PDA self-healing nanocomposite hydrogels. Dopamine (DA) was coated on the surface of AuNPs to obtain AuNPs based composite (AuNPs@PDA) and the AuNPs@PDA was implanted into the PVA hydrogels to obtain nanocomposite hydrogel through facile freeze-thaw cycle. Glucose oxidase (GOD) was added to the hydrogel matrix to achieve specific detection of glucose in sweat. The obtained hydrogels exhibit high deformability (573.7 %), excellent mechanical strength (550.3 KPa) and self-healing properties (85.1 %). The PVA/AuNPs@PDA hydrogel sensors exhibit quick response time (185.0 ms), wide strain sensing range (0-500 %), superior stability and anti-fatigue properties in motion detection. The detection of glucose had wide concentration detection range (1.0 µmol/L-200.0 µmol/L), low detection limits (0.9 µmol/L) and high sensitivity (24.4 µA/mM). This work proposes a reference method in dual detection of human exercise and sweat composition analysis.
Asunto(s)
Glucosa Oxidasa , Nanopartículas del Metal , Humanos , Nanogeles , Oro , Sudor , Glucosa , Hidrogeles/química , Conductividad EléctricaRESUMEN
A visible-light metal-free photocatalytic regioselective and enantioselective alkene halofunctionalization reaction under mild conditions is reported. Various terminal and internal alkenes were transformed to their α-halogenated and α,ß-dibrominated derivatives in good to excellent yields within reaction time as short as 5 min. Water can be used as the "green" nucleophile and solvent in the halohydroxylation and halo-oxidation reactions. Different types of products can be obtained by adjusting the reaction conditions. In addition, sunlight is proved to produce products with similar yields, representing a practical example of solar synthesis and providing an opportunity for solar energy utilization.
RESUMEN
Nowadays, stretchable self-healing hydrogels designed by biomass-based materials have gathered remarkable attention in numerous frontier fields such as wound healing, health monitoring issues, and electronic skin. In this study, soy protein isolate (SPI), a common plant protein, was cross-linked to nanoparticles (SPI NPs) by Genipin, (Gen) which was attracted from the native Geniposide. Oil-in-water (O/W) Pickering emulsion was formed by SPI NPs wrapping the linseed oil, and further implanted into poly(acrylic acid)/guar gum (PAA/GG)-based self-healing hydrogels by multiple reversible weak interactions. With the addition of Pickering emulsion, the hydrogels have achieved a remarkable self-healing ability (self-healing efficiency could reach 91.6% within 10 h) and mechanical properties (tensile strength of 0.89 MPa and strain of 853.2%). Therefore, these hydrogels with good reliable durability have outstanding application prospects in sustainable materials.
Asunto(s)
Nanopartículas , Proteínas de Soja , Hidrogeles , EmulsionesRESUMEN
Integrating advanced technologies into solar-driven water evaporation is gradually considered as a clean and sustainable way to acquire freshwater from saline or wastewater. In this study, thin molybdenum sulfide nanosheet arrays (MoS2 NSAs) modified by tungsten oxide nanoparticles (WO3) were designed. The as-prepared solar absorber could purify water and accomplish photocatalytic degradation of dyes that existed in bulk water via solar-driven water evaporation. Compared with bare MoS2 NSAs, the modification of WO3 enhanced the separation of electrons and holes within the solar absorber, resulting in the improvement of photocatalytic efficiency. The net evaporation rate of the solar absorber reached 0.97 kg m-2h-1 and the degradation rate constant of rhodamine B (RhB) reached 0.101 min-1 under 1 sun. This study successfully combined photothermal conversion and photocatalytic technologies and provided a new method for the treatment of dye wastewater with zero wastewater discharge.
Asunto(s)
Molibdeno , Purificación del Agua , Colorantes , Aguas Residuales , AguaRESUMEN
Aerobic oxidative desulfurization (AODS) promises a sustainable alternative technology for diesel desulfurization, which necessitates the efficient aerobic oxidation of thiophenic sulfides under mild conditions to minimize energy input, yet being longstandingly plagued by the grand challenge in low-temperature activation of triplet oxygen. Here we synthesize vanadium nitride quantum dots on graphene to controllably create coordination-unsaturated edge/corner V sites for boosting the AODS reaction. The catalyst activates the reaction at 70 °C, and is two orders of magnitude more active than the best V-based catalysts. We demonstrate through computational studies that the low-coordinated edge/corner V sites can effectively activate oxygen and adsorb sulfides to lower the activation barrier, dramatically enhancing the activity. The catalyst achieves deep AODS of real diesel at 80 °C with negligible attenuation in successive reuses, which highlights its attractive industrial potential. These findings provide scientific and practical insights to develop high-performance catalysts for a sustainable AODS process.
RESUMEN
Janus bio-nanomaterials have great application potential in functional solid surfactants, probes and flexible sensors. In this manuscript, the sustainable Janus cellulose nanocrystals-type (CNCs-type) nanomaterials were prepared by Pickering emulsion template method. The asymmetric functionalism of Janus nanorods was realized by asymmetrically grafting polypyrrole (PPy) and polydopamine (PDA) onto different sides of CNCs (Janus CNCs-PPy /PDA (JCNs)). JCNs was successfully applied to self-healing nanocomposite hydrogels and further applied to the development of flexible sensors. The self-healing efficiency of nanocomposite hydrogels was 87.2%, and the stress and strain reached 3.50 MPa and 453.45%, respectively. It is worth noting that flexible sensors have been widely used in the field of wearable electronic sensing for real-time monitoring of human movement due to their high sensitivity (gauge factor (GF) = 9.9) and fast response time (260 ms).
Asunto(s)
Nanocompuestos , Nanopartículas , Celulosa/química , Conductividad Eléctrica , Humanos , Hidrogeles/química , Nanocompuestos/química , Nanogeles , Nanopartículas/química , Polímeros/química , PirrolesRESUMEN
The hazardous indoor air pollutants of formaldehyde (HCHO) are harmful for human health. Nowadays, it is important to design and fabricate green and efficient HCHO removal materials for HCHO removal from polluted indoor air. In this manuscript, cellulose nanocrystals (CNCs) as green nanomaterials were successfully surface-initiated by 2-(methacryloyloxy)ethyl acetoacetate (MEAA) as functional monomer via surface-initiated Activator Generated by Electron Transfer Atom Transfer Radical Polymerization (SI-AGET ATRP) for the application in removal of HCHO. The employment of CNCs/Poly(2-(methacryloyloxy)ethyl acetoacetate) (CNCs@PMEAA) as nanocomposites were further implanted self-healing waterborne coating for an effective way to remove HCHO. From the result, the HCHO removal efficiency reached 97.5% of CNCs@PMEAA-type coating within 300 min at room temperature, which was much higher than that of the conventional coating (82.8%). This study provides some promising green methods for designing nanocomposite's waterborne coating to remove HCHO at room temperature.
RESUMEN
As a promising solar energy conversion technology, solar water evaporation has been regarded as an energy-efficient approach to alleviate the freshwater shortage caused by industrial water pollution. In this paper, we developed a straightforward method with a solar-driven steam generator (SSG) based on the carbonized green algae (CGA) as a light-to-heat conversion material (LHCM) to deal with the industrial wastewater of gold smelting. CGA SSG exhibited excellent light absorption, hydrophilicity, and water evaporation rate (1.66 kg·m-2·h-1). It accomplished the non-selective removal of heavy metal ions (Cu2+, Pb2+, Zn2+, Hg2+) and CN- in the treatment of gold smelting wastewater, and the ion removal rate was 99%. Compared with traditional and complex wastewater treatment technologies, the solar-driven CGA SSG presented many advantages (low cost, simple preparation, and high performance) in water purification, which could be employed in backward areas to obtain clean water.
Asunto(s)
Chlorophyta , Energía Solar , Purificación del Agua , Oro , Aguas Residuales , Purificación del Agua/métodosRESUMEN
Wearable strain sensors have received widespread attention in research fields due to their applications in human motion detection. In this manuscript, the fabrication of functionalized Janus graphene oxide (GO) nanosheets were used by Pickering emulsion template. Polypyrrole (PPy) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) were asymmetrically grafted on the two sides of GO (GO@PPy/PDMAEMA Janus NS), which successfully applied to synthesize Janus NS/guar gum-poly(acrylic acid) (GG-PAA) self-healing nanocomposite hydrogels. The outstandingly improved self-healing efficiency (92.8% for 2 h) and mechanical properties (strength of 4.12 MPa and toughness of 873.8%) of nanocomposite hydrogels were mainly supported by the collaborative effect of reversible electrostatic interactions, multiple hydrogen bonds and metal-ligand coordination. Moreover, the hydrogels exhibited strain sensitivity and could be able to monitor a variety of human motions, which have outstanding application prospects in wearable flexible sensors.
Asunto(s)
Resinas Acrílicas/química , Técnicas Biosensibles/métodos , Galactanos/química , Grafito/química , Hidrogeles/química , Mananos/química , Nanoestructuras/química , Gomas de Plantas/química , Técnicas Biosensibles/instrumentación , Fenómenos Mecánicos , Dispositivos Electrónicos VestiblesRESUMEN
Janus nanomaterials possess remarkable prospects in the design of a series of smart materials with unique asymmetric properties. In this work, surface functionalized Janus cellulose nanocrystalline-type (CNCs-type) nanomaterials were manufactured by Pickering emulsion template and the construction of self-healing nanocomposite hydrogels has been realized. During emulsification, the mussel-inspired chemistry was employed to develop Janus nanocomposites. The extension of molecular chain of poly-lysine (PLL) and the polydopamine (PDA) coating were grafted on different sides of CNCs. Afterwards, the prepared nanocomposites were added to poly (acrylic acid) (PAA)-based hydrogels which formed by in-situ polymerization. The collaborative effect of metal-ligand coordination between the molecular chain of PLL, PDA coating, PAA chains and metal ions endowed the nanocomposite hydrogels with excellent mechanical properties (8.8 MPa) and self-healing efficiency (88.9%). Therefore, the synthesized Janus CNCs-PDA/PLL nanocomposites are expected to have diverse application in the development of smart materials with self-healing ability.
Asunto(s)
Celulosa/química , Complejos de Coordinación/síntesis química , Nanogeles/química , Acrilatos/química , Complejos de Coordinación/química , Emulsiones , Lisina/química , Nanopartículas Multifuncionales , Nanocompuestos , NanopartículasRESUMEN
Recently, self-healing and high mechanical strength hydrogels have aroused much research due to their potential future in strain-sensitive flexible sensors. In this manuscript, we successfully designed self-healing and toughness cellulose nanocrystals (CNCs) nanocomposite hydrogels by grafted polypyrrole (PPy) on the surface of CNCs to enhance electrical conductivity. The obtained nanocomposite hydrogels exhibit outstanding self-healing and mechanical behaviors, and the optimal mechanical strength, toughness and self-healing efficiency can be up to 5.7 MPa, 810% and 89.6%, respectively. Using these functional nanocomposite hydrogels, strain-sensitive wearable flexible sensors were designed to monitor finger joint motions, bending of knee, and even the slight pulse beating. Surprisingly, the flexible sensors could evidently perceive body motions from large movements (knee bending) to tiny signals (pulse beating). In addition, it exhibited excellent durability after repeated cycles. This method of prepared self-healing nanocomposite hydrogels will have a potential prospect in the design of biomedical, biosensors, and flexible electronic devices.
Asunto(s)
Técnicas Biosensibles , Hidrogeles/química , Nanogeles/química , Nanopartículas/química , Polímeros/química , Dispositivos Electrónicos Vestibles , HumanosRESUMEN
A novel sandwich-type electrochemical immunosensor has been fabricated for simultaneous determination of three kinds of tumor markers (TMs). The signal-amplified platform for sensor was assisted by graphene oxide (GO) loaded with Poly(styrene-alt-maleic anhydride) (PSMA). Three TMs of prostate specific antigen (PSA), human a-fetoprotein (AFP) and carbohydrate antigen 125 (CA 125) were employed as model test molecules. This sandwich-type immunoassay could detect the three antigens in differential pulse voltammetry (DPV) scan well at the same time. Under the optimized conditions, the multiplexed immunosensor displayed a splendid linear response in the range of 1.13 pg mL-1 - 113 ng mL-1 for PSA, 0.35 pg mL-1 - 35 ng mL-1 for AFP and 0.025 U mL-1 - 250 U mL-1 for CA 125. The detection limit was 86 fg mL-1, 14 fg mL-1 and 0.0019 U mL-1 for PSA, AFP and CA 125, respectively. This strategy provides a simple and sensitive method for immunoassay for the identification and validation of specific early cancers.
Asunto(s)
Técnicas Biosensibles , Grafito , Nanopartículas del Metal , Neoplasias , Biomarcadores de Tumor , Técnicas Electroquímicas , Oro , Humanos , Inmunoensayo , Límite de Detección , Masculino , alfa-FetoproteínasRESUMEN
As robust functional polymers, polymer brush-based hybrid nanomaterials have potential application in the highly sensitive determination of tumor markers (TMs). Currently, there are plentiful reports on the polymerization methods of functional polymer brushes. Low ppm ATRP (activators (re)generated by electron transfer for atom transfer radical polymerization (A(R)GET ATRP), initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) and electrochemically mediated atom transfer radical polymerization (eATRP)) is a facile and robust methodology with the advantages of simplicity, eco-friendliness and wide applicability to prepare well-defined polymeric materials. In this work, a controlled polymer brush-type functional nanoprobe is successfully fabricated by functional AGET ATRP and used as a sandwich-type electrochemical immunosensor for precise detection of TMs (alpha-fetoprotein, AFP). Using graphene oxide (GO) as an excellent conductive matrix, a GO-based poly-heterozygosis pyridine nanomaterial (GO@PHPY) is obtained by surface-initiated AGET ATRP and photocatalytic modification. The nanoprobe is assembled using GO@PHPY and a detection antibody (Ab2) to detect AFP, in which Cu(ii) serves as a signal label to coordinate with the pyridyl group. Under optimized conditions, the electrochemical sensor exhibits a good detection effect on AFP, with a detection range of 0.1 pg mL-1 to 100 ng mL-1 and a low detection limit of 0.08 pg mL-1. It is worth noting that the detection platform can be applied to the detection of real human serum samples. Thus, it is a desirable platform for AFP detection in clinical diagnosis and practical applications. Meanwhile, this work proves that designing and constructing functional polymer brushes is one of the most effective methods for developing new materials for analytical scientific applications.
Asunto(s)
Técnicas Biosensibles , Polímeros , Humanos , Inmunoensayo , Polimerizacion , alfa-FetoproteínasRESUMEN
A green strategy by integrating surface-initiated metal-free photoinduced electron transfer-atom transfer radical polymerization (PET-ATRP) with mussel-inspired polydopamine (PDA) chemistry, was used to fabricate multi-walled carbon nanotubes (MWCNTs)/poly(4-vinylpyridine) (P4VP) nanocomposites. Self-healing nanocomposite hydrogels were facilely designed with these nanocomposites through dynamic supramolecular interactions. Using mussel-inspired PDA chemistry from MWCNTs, nanocomposites (MWCNTs@PDA-P4VP) were successfully prepared by metal-free PET-ATRP with MWCNTs@PDA-Br as an initiator, rhodamine B as photocatalyst, 4-vinylpyridine (4VP) as monomer, respectively. Importantly, the obtained nanocomposite hydrogels had high mechanical strength (2.9 MPa), prior fracture strain (633.8%) and excellent self-healing property (90.6%). These methodologies will provide opportunities for the design of eco-functional materials or flexible biosensors.
Asunto(s)
Materiales Biomiméticos/química , Hidrogeles/química , Nanocompuestos/química , Nanotubos de Carbono/química , Polivinilos/química , Animales , BivalvosRESUMEN
In this manuscript, self-healing, highly flexible hydrogels based on hydroxypropyl guar gum (HPG) were prepared by adding dopamine-coated reduced-graphene oxide (rGO@PDA). The multiple reversible dynamic networks were simultaneously constructed by boron-oxygen and metal-ligand interactions. These multiple networks significantly improve the self-healing efficiency and mechanical strength of the biomass hydrogels. It is noteworthy that rGO@PDA can enhance conductivity and flexibility properties. Impressively, flexible sensor with these self-healing hydrogels have a large strain range (728%), high sensitivity (GF = 11.30) and fast response time (210 ms). The obtained flexible sensors can also detect human motion (such as sound vibrations and pulse rates) to large scales (such as knee flexion) over a wide temperature range (-20-30 °C). The signals of sensors have superior stability and repeatability, which show potential application prospect in the field of flexible wearable devices.