Magnetic bentonite decorated with Pd nanoparticles and cross-linked polyvinyl pyridine as an efficient nanocatalyst for Suzuki coupling and 4-Nitrophenol reduction reactions.

This study reports the preparation of a novel type of support based on magnetically recyclable bentonite functionalized with divinylbenzene-polyvinyl pyridine (PVP-DVB) for Pd (II) nanocatalyst by a simple cost-effective method. Firstly, the conventional co-precipitation method synthesized Fe3O4 nanoparticles (NPs) onto bentonite sheets. Then the prepared magnetic support surface was functionalized by divinylbenzene-polyvinyl pyridine (PVP-DVB) to create a cross-linked polymer with a high coordination ability with palladium. Repeated nitrogen units in the PVP-DVB polymer chain increase the number of Pd bonds and thus lead to higher performance of the nanocatalyst. Finally, the palladium NPs were simultaneously synthesized and immobilized under mild conditions. The synthesized nanocatalyst was characterized by several methods such as scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, vibrating sample magnetometer, inductively coupled plasma mass spectrometry and thermogravimetric analysis. The efficiency of synthesized heterogeneous nanocatalyst was investigated in Suzuki-Miyaura cross-coupling reactions between a range of aryl halides (X = Cl, Br, I) with phenylboronic acid and in the reduction of 4-nitrophenol (4-NP). Moreover, the synthesized nanocatalyst could be easily recovered and reused several times with an efficiency greater than 90%.

Global principles in local traditional knowledge: A review of forage plant-livestock-herder interactions.

An understanding of traditional ecological knowledge systems is increasingly acknowledged as a means of helping to develop global, regional and national, but locally relevant policies. Pastoralists often use lands that are unsuitable for crops due to biophysical and climatic extremities and variabilities. Forage plants of pastures are utilized by herding communities by applying locally relevant multigenerational knowledge. We analyzed the forage-related knowledge of pastoralists and herders by reviewing scientific papers and video documentaries on forage plants and indicators, their use in land management, and plant-livestock interactions. Semi-structured interviews were also conducted with key knowledge holders in Iran, Mongolia, Kenya, Poland and Hungary. We found 35 indicators used by herders to describe forage species. The indicators described botanical features, livestock behavior during grazing, and the impact of plants on livestock condition and health. The indicators were used in context-specific management decisions, with a variety of objectives to optimize grazing. We identified ten global principles, including, among others, a livestock-centered perspective, close monitoring and targeted pasturing of various (preferred or avoided) forages, and the use of different livestock types and well-planned spatial movements at multiple scales to optimize the utilization of available plant resources. Although pastoralists vary greatly across the globe, the character and use of their traditional forage-related knowledge do seem to follow strikingly similar principles. Understanding these may help the local-to-global-level understanding of these locally specific systems, support bottom-up pastoral initiatives and discussions on sustainable land management, and help to develop locally relevant global and national policies.

Characterization and Release Behavior of a Thiosemicarbazone from Electrospun Polyvinyl Alcohol Core-Shell Nanofibers.

Mats of polyvinyl alcohol (PVA) core-shell nanofibers were produced using coaxial electrospinning in the presence of a thiosemicarbazone (TSC) N4-(S)-1-phenylethyl)-2-(pyridin-2-yl-ethylidene)hydrazine-1-carbothioamide (HapyTSCmB). Monolithic fibers with 0% or 5% TSC and core-shell fibers with 10% TSC in the spinning solution were studied to compare stability and release rates. SEM showed the formation of uniform, bead-free, cylindrical, and smooth fibers. NMR spectroscopy and thermal analysis (TG/DTA) gave proof for the chemical integrity of the TSC in the fiber mats after the electrospinning process. Attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy showed no TSC on the surface of the PVA/TSC-PVA fibers confirming the core-shell character. The TSC release profiles of the fibers as studied using UV-vis absorption spectroscopy showed a slower release from the PVA/TSC-PVA core-shell structure compared with the monolithic PVA/TSC fibers as well as lower cumulative release percentage (17%). Out of several release models, the Korsmeyer-Peppas model gave the best fit to the experimental data. The main release phase can be described with a Fick-type diffusion mechanism. Antibacterial properties were tested against the Gram-positive Staphylococcus aureus bacterium and gave a minimal inhibitory concentration of 12.5 µg/mL. 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazoliumbromide (MTT)-based cytotoxicity experiments showed that the cell viability of fibroblast at different contents of TSC was slightly decreased from 1.5% up to 3.5% when compared to control cells.

Economic sustainability assessment in semi-steppe rangelands.

This study was conducted to determine indices and components of economic sustainability assessment in the pastoral units of Sahand summer rangelands. The method was based on descriptive-analytical survey (experts and researchers) with questionnaires. Analysis of variance showed that the mean values of economic components are significantly different from each other and the efficiency component has the highest mean value (0.57). The analysis of rangeland pastoral units with the technique for order-preference by similarity to ideal solution (TOPSIS) indicated that from an economic sustainability standpoint, Garehgol (Ci = 0.519) and Badir Khan (Ci = 0.129), pastoral units ranked first and last, respectively. This study provides a clear understanding of existing resources and opportunities for policy makers that is crucial to approach economic sustainable development. Accordingly, this study can help better define sustainable development goals and monitor the progress of achieving them.

Preparation and characterization of biocompatible silver nanoparticles using pomegranate peel extract.

The potential application of any nanoparticles, including silver nanoparticles (AgNPs), strongly depends on their stability against aggregation. In the current study, an aqueous extract of pomegranate peel was used as a stabilizer during synthesis of AgNPs. Nanoparticles have been prepared by the chemical reduction method from an aqueous solution of silver nitrate in the presence of sodium borohydride as a reducing agent. The AgNPs were characterized by dynamic light scattering (DLS), zeta-potential measurements, UV-Vis spectroscopy and transmission electron microscopy (TEM). The antibacterial efficiency of AgNPs against Escherichia coli was investigated. The size, polydispersity index, FWHM, and colloidal stability of nanoparticles in dispersion depends on the extract concentrations. In the presence of pomegranate peel extract, the nanoparticles suspension shows colloidal stability at least for a week. Our studies show that synthesized AgNPs with the above described procedure were stable at pH = 3-12 and in the temperature range of 25-85 °C. Additionally, AgNPs exhibit antibacterial properties, especially at the lowest amount of extract to silver ratio (KExtract/Ag).

Analysis of lecithin treatment effects on the structural transformation of wool fiber using vibrational spectroscopy.

The keratin macromolecule in wool fiber may be found in α-helix or ß-sheet conformations besides a disordered portion. The physical and chemical treatments may cause transformations between α-helix and ß-sheet conformations. The aim of this study was to investigate the influence of lecithin treatment on the wool fiber using the micro-Raman spectroscopy and Fourier transform infrared spectroscopy. Characteristic bands found in the FTIR spectra of wool fibers including the amide A, amide B and amide I-III, which are assigned to the peptide bonds of wool keratin and arise from the amide bonds that link the amino acids. The lecithin treatment didn't affect the peak position of amide bands and only slightly influenced their intensity. It means that the lecithin treatment didn't change the chemical structure of wool fibers. The amide I and III regions, CC skeletal vibration region, and SS bonds vibration regions were analyzed with the Raman microscope. The results indicated the peak area of α-conformation increased gradually by lecithin treatment of the wool fiber, while the peak area of ß-conformation decreased. Therefore, it seems that lecithin treatment of the wool fiber resulted in transformation of ß-sheet to α-helix.

Alkaline treatment effect on the properties of in-situ synthesised ZnO nanoparticles on cotton fabric.

In this study, an in-situ approach was used to synthesise zinc oxide nanoparticles on the surface of cotton fabric. The effect of alkaline pre- and after-treatment and Zn(2+) concentration was studied on the morphological, structural, thermal, photocatalytic, and antibacterial properties of loaded cotton fabrics. Scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffractometer, thermogravimetric analysis, and attenuated total reflection Fourier transform infrared spectrometer were used to characterise the properties of loaded cotton fabrics. Alkaline after-treatment of cotton fabric presented more dispersed zinc oxide nanoparticles, and an increase in Zn(2+) concentration led to form agglomerated nanoparticles on the surface of cotton fibres. The loaded cotton fabrics with zinc oxide nanoparticles presented an inhibition zone against Staphylococcus aureus and Escherichia coli. In addition, the stain of methylene blue on the surface of loaded samples was degraded after irradiated under visible light.

Stability of colloidal silver nanoparticles trapped in lipid bilayer: effect of lecithin concentration and applied temperature.

The use of silver nanoparticle on various substrates has been widespread because of its good antibacterial properties that directly depend on the stability of the silver nanoparticles in a colloidal suspension. In this study, the colloidal solutions of the silver nanoparticles were synthesised by a simple and safe method by using lecithin as a stabilising agent and their stability was examined at various temperatures. The effect of the lecithin concentrations on the stability of the synthesised silver nanoparticles was examined from 25 to 80°C at 5°C intervals, by recording the changes in the UV-vis absorption spectra, the hydrodynamic diameter and the light scattering intensity of the silver nanoparticles. In addition, the morphology of the synthesised silver nanoparticles was investigated with the low-voltage scanning electron microscopy and transmission electron microscopy. The results indicated that increasing temperature caused different changes in the size of the stabilised and the unstabilised silver nanoparticles. The size of the stabilised silver nanoparticles reduced from 38 to 36 nm during increasing temperature, which confirmed good stability.

Antibacterial continuous nanofibrous hybrid yarn through in situ synthesis of silver nanoparticles: preparation and characterization.

Nanofibrous hybrid yarns of polyvinyl alcohol (PVA) and poly-l-lactide acid (PLLA) with the antibacterial activity were prepared that contains 0, 5, 10, 20, and 30 wt.% of silver nanoparticles according to the PVA polymer content. This was performed by electrospinning using distilled water and 2, 2, 2-trifluoroethanol as a solvent for PVA and PLLA respectively, and sodium borohydride was used as a reducing agent. The scanning electron microscope observation confirmed the formation of AgNPs into the PVA nanofiber structure, and they were uniform, bead free, cylindrical and smooth. The diameter of hybrid yarns and their nanofiber component was decreased as the silver nitrate concentration in electrospinning solutions was increased. The differential scanning calorimetry results indicated that the silver nanoparticles can form interactions with polymer chains and decrease the melting enthalpy. The mechanical analysis showed a lower stress and strain at break of the AgNP-loaded nanofibrous hybrid yarns than the unloaded hybrid yarn. However, there wasn't a statistically significant difference between the strain at break of electrospun nanofibrous hybrid yarns. Moreover, the bactericidal efficiency of all loaded samples was over 99.99%.

In situ synthesis of nano silver/lecithin on wool: enhancing nanoparticles diffusion.

Silver nanoparticles are being used increasingly in various applications because of their antibacterial properties. It is necessary to lower their direct contact with the skin by embedding in a polymer reducing their side effects. In this study, silver nanoparticles were synthesized inside the wool fibers acted as a polyfunctional ligands. Lecithin as a biological lipid was used to enhance the diffusion of silver ions and nanoparticles into the wool fibers reducing cytotoxicity effects of the nano silver loaded wool. The highest loading efficiency and inhibition zone was observed on the wool with the highest lecithin concentration. Presence of lecithin reduced the rate of nano silver release which results in decreasing the specific coefficient of lethality. Also, the extracted solution of the synthesized silver nanoparticles on the wool has not altered the morphology of L929 fibroblast cells.

Nano silver entrapped in phospholipids membrane: synthesis, characteristics and antibacterial kinetics.

The antimicrobial property of stabilized silver nanoparticles (AgNPs) with phospholipid membrane was investigated on both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacterial strains. The influence of phospholipid concentrations on antibacterial kinetics actions of AgNPs was studied with two different methodologies in order to understand the bactericidal and bacteriostatic effects. The bacterial inactivation of synthesized AgNPs fitted well to the Chick-Watson model with a high regression coefficient, R(2) > 0.91. The antibacterial properties of AgNPs depend on the particle size, stabilizer and lecithin concentrations. Only the stabilized AgNPs that have the K(lec/Ag) values of 1 and 2 presented the inhabitation zone, while unstabilized AgNPs agglomerated quickly, settled on the wells and did not diffuse in agar. In addition, the specific coefficient of lethality depends on the lecithin concentration. An increase in lecithin concentration caused multilayer creation on the AgNPs' surface and reduced the release of AgNPs which led to low bacterial killing rate.

Synthesis of Ag-liposome nano composites.

Silver nanoparticles were synthesized and stabilized by a simple, environment-friendly method in a liposomes structure. Liposomes were prepared by facing lecithin to the aqueous-phase solutions while stirring vigorously. The ratio of lecithin concentration to silver nitrate (K(Lec/Ag) = [Lecithin]/[AgNO(3)]) is the influencing factor in the synthesis of silver nanoparticles. The stability, size distribution, and antibacterial properties of synthesized silver nanoparticles were studied by ultraviolet (UV)-visible, dynamic light scattering, and antibacterial assay. The UV spectra indicated a single symmetric extinction peak at 400 nm, confirming the spherical shape of the synthesized silver nanoparticles. A high K(Lec/Ag) value leads to a reduction in the intensity of extinction spectra and increases the size of Ag-liposomes nanocomposites. The large Ag-liposomes nanocomposites are transformed to the smaller Ag-liposomes nanocomposites (from 342 to 190 nm) due to sonication treatment. The stabilized silver nanoparticles with various lecithin concentrations showed a good antibacterial activity against Staphylococcus aureus, a Gram-positive bacterium, and Escherichia coli, a Gram-negative bacterium.

A review on applications of liposomes in textile processing.

This review discusses the properties of liposomes and their role in the textile process, including textile preparation and dyeing. Liposomes have a surface activity effect due to a hydrophilic head group and hydrophobic hydrocarbon tail. Its preparations do not tend to foam, which advantageously distinguishes them from other textile auxiliaries. According to the carrier role of liposomes, they can be used in several textile processes such as textile finishing and dyeing with several types of dyes and fibers. Each application is discussed in this review paper. Several types of dyes are encapsulated by liposomes in the dyeing process and their presence indicates that they have retardant and leveling effects according to their gradual release of dyes. In addition, the presence of liposomes in the textile process can improve the mechanical properties of textile products, resulting in better wash fastness properties and leveling effect and handle properties. The best character of liposomes is a reduction in temperature of process resulting to save energy and they are environment degradable materials.