Properties of Cosmic Deuterons Measured by the Alpha Magnetic Spectrometer.

Precision measurements by the Alpha Magnetic Spectrometer (AMS) on the International Space Station of the deuteron (D) flux are presented. The measurements are based on 21×10^{6} D nuclei in the rigidity range from 1.9 to 21 GV collected from May 2011 to April 2021. We observe that over the entire rigidity range the D flux exhibits nearly identical time variations with the p, ^{3}He, and ^{4}He fluxes. Above 4.5 GV, the D/^{4}He flux ratio is time independent and its rigidity dependence is well described by a single power law ∝R^{Δ} with Δ_{D/^{4}He}=-0.108±0.005. This is in contrast with the ^{3}He/^{4}He flux ratio for which we find Δ_{^{3}He/^{4}He}=-0.289±0.003. Above ∼13 GV we find a nearly identical rigidity dependence of the D and p fluxes with a D/p flux ratio of 0.027±0.001. These unexpected observations indicate that cosmic deuterons have a sizable primarylike component. With a method independent of cosmic ray propagation, we obtain the primary component of the D flux equal to 9.4±0.5% of the ^{4}He flux and the secondary component of the D flux equal to 58±5% of the ^{3}He flux.

Temporal Structures in Positron Spectra and Charge-Sign Effects in Galactic Cosmic Rays.

We present the precision measurements of 11 years of daily cosmic positron fluxes in the rigidity range from 1.00 to 41.9 GV based on 3.4×10^{6} positrons collected with the Alpha Magnetic Spectrometer (AMS) aboard the International Space Station. The positron fluxes show distinctly different time variations from the electron fluxes at short and long timescales. A hysteresis between the electron fluxes and the positron fluxes is observed with a significance greater than 5σ at rigidities below 8.5 GV. On the contrary, the positron fluxes and the proton fluxes show similar time variation. Remarkably, we found that positron fluxes are modulated more than proton fluxes with a significance greater than 5σ for rigidities below 7 GV. These continuous daily positron fluxes, together with AMS daily electron, proton, and helium fluxes over an 11-year solar cycle, provide unique input to the understanding of both the charge-sign and mass dependencies of cosmic rays in the heliosphere.

Search for Lepton Number and Flavor Violation in K

Searches for the lepton number violating K^{+}→π^{-}µ^{+}e^{+} decay and the lepton flavor violating K^{+}→π^{+}µ^{-}e^{+} and π^{0}→µ^{-}e^{+} decays are reported using data collected by the NA62 experiment at CERN in 2017-2018. No evidence for these decays is found and upper limits of the branching ratios are obtained at 90% confidence level: B(K^{+}→π^{-}µ^{+}e^{+})<4.2×10^{-11}, B(K^{+}→π^{+}µ^{-}e^{+})<6.6×10^{-11} and B(π^{0}→µ^{-}e^{+})<3.2×10^{-10}. These results improve by 1 order of magnitude over previous results for these decay modes.

Optimization of torrefaction conditions of coffee industry residues using desirability function approach.

The aim of the present study is to analyze the influence of independent process variables such as temperature, residence time, and heating rate on the torrefaction process of coffee chaff (CC) and spent coffee grounds (SCGs). Response surface methodology and a three-factor and three-level Box-Behnken design were used in order to evaluate the effects of the process variables on the weight loss (WL) and the Higher Heating Value (HHV) of the torrefied materials. Results showed that the effects of the three factors on both responses were sequenced as follows: temperature>residence time>heating rate. Data obtained from the experiments were analyzed by analysis of variance (ANOVA) and fitted to second-order polynomial models by using multiple regression analysis. Predictive models were determined, able to obtain satisfactory fittings of the experimental data, with coefficient of determination (R2) values higher than 0.95. An optimization study using Derringer's desired function methodology was also carried out and the optimal torrefaction conditions were found: temperature 271.7°C, residence time 20min, heating rate 5°C/min for CC and 256.0°C, 20min, 25°C/min for SCGs. The experimental values closely agree with the corresponding predicted values.

Carbon footprint of conventional and organic beef production systems: An Italian case study.

Beef cattle production is a widespread activity in Italy in the agricultural field and determines an important impact on environment and resources consumption. Carbon footprint evaluation is thus necessary to evaluate the contributions of the different stages and the possible improvements of the production chain. In this study, two typical Italian beef production systems, a conventional and an organic one are investigated in order to evaluate the greenhouse gas emissions from "cradle to gate farm" by a Life Cycle Assessment (LCA) approach; the carbon footprint (CF) per 1kg of live weight meat is calculated. The contributions from feed production, enteric fermentation, and manure management are taken into account, in order to compare the life cycle of the two productions; also the carbon balance in soil is evaluated, in order to verify the impact in a life cycle perspective. The results of CF calculation of the two farms show that organic system (24.62kgCO2eq/kg live weight) produce more GHG emissions than the conventional one (18.21kgCO2eq/kg live weight) and that the enteric fermentation is the more heavy contribution, with a range of 50-54% of the global CF value. Improvements of the production chain could be realized by accurate feeding strategies, in order to obtain reduction of methane emissions from enteric digestion of cattles.

Thermal degradation of driftwood: Determination of the concentration of sodium, calcium, magnesium, chlorine and sulfur containing compounds.

The annual production of driftwood in Italy has been estimated to be more than 60,000 tonnes. This wood can be used as an energy source. Particular attention should be paid to its content of alkali and alkaline earth metals, sulfur and chlorine. Few works are available in the literature on this topic. For this reason, the authors propose experimental tests of combustion, gasification and pyrolysis, to evaluate the fate of alkali and alkaline earth metals, sulfur and chlorine in the solid residues and compare the three thermal degradation technologies. The results show a release of alkaline earth metals of about 45% of the initial quantity for gasification and a release of 55% of the initial quantity for combustion (while pyrolysis at 600°C has a very low release). The release of sodium is about 65% for gasification and 80% for combustion. It can be seen that the release of sodium is higher than that of alkaline earth metals; this is due to the divalency of the last ones. Dealing with the release of major elements (chlorine, sulfur and AAEMs) the tests have shown that pyrolysis process is a low emitting technology.

Thermal behaviour and kinetic study of the olive oil production chain residues and their mixtures during co-combustion.

The kinetic behaviour of olive tree pruning (PR), two- (2PH) and three-phase (3PH) olive pomace and their blends was investigated under combustion condition using thermogravimetric analysis. PR was blended with 2PH and 3PH at different ratios (25:75, 50:50 and 75:25) and tested in the temperature range from ambient to 1000°C in order to evaluate the co-combustion behaviour. Results showed that the thermal degradation of all samples can be divided into three regions (drying, devolatilisation, char oxidation) with different combustion properties, depending on the percentage of PR. Significant interaction was detected between the fuels, and reactivity of 2PH and 3PH was improved upon blending with PR. The iso-conversional methods, Ozawa-Flynn-Wall and Vyazovkin, were employed for the kinetic analysis of the oxidation process. The results revealed that the activation energy of PR was higher than the one of 2PH and 3PH, and the minimum value was obtained for 25PR752PH sample.

Optimization of the steam explosion and enzymatic hydrolysis for sugars production from oak woods.

Fermentable sugars production from three kind of steam-exploded oak wood was optimized by Response Surface Methodology (RSM), using the severity factor (R0), the pretreated total solids (TS%) and the enzyme loading (EL%) as variables of a central composite design. A total of 17 experiments for each biomass were carried out. The optimal conditions established with RSM were: severity, 4.46 for holm, 4.03 for turkey oak and 3.92 for downey oak; total solids, 5.4% for holm, 5.0% for turkey oak and 12.7% for downey oak; and enzyme concentration, 9.6% for holm, 15.0% for turkey oak and 15.0% for downey oak. Under these conditions, the model predicted an overall sugar yield of 67.1% for holm, 79.9% for turkey oak and 68.4% for downey oak. The results of the confirmation experiments under optimal conditions agreed well with model predictions. Oak wood species may be a good feedstock for the production of reducing sugars.

Thermogravimetric analysis of the behavior of sub-bituminous coal and cellulosic ethanol residue during co-combustion.

The influence of the addition of cellulosic ethanol residue (CER) on the combustion of Indonesian sub-bituminous coal was analyzed by non isothermal thermo-gravimetric analysis (TGA). The effect of blends ratio (5%, 10%, 15% and 20%), interaction mechanism, and heating rate (5°C/min, 10°C/min, 15°C/min, 20°C/min) on the combustion process was studied. The results show that the increase of the blending ratio allows to achieve the increase of the combustibility index from 7.49E-08 to 5.26E-07 at the blending ratio of 20%. Two types of non-isothermal kinetic analysis methods (Ozawa-Flynn-Wall and Vyazovkin) were also applied. Results indicate that the activation energy of the blends decreases with increasing the conversion rate. In particular, the blending ratio of 20% confirms to have the better combustion performance, with the average value of the activation energy equal to 41.10 kJ/mol obtained by Ozawa-Flynn-Wall model and 31.17 kJ/mol obtained by Vyazovkin model.

Assessment of carbon footprint and energy performance of the extra virgin olive oil chain in Umbria, Italy.

The cradle to grave carbon footprint (CF) and energy footprint (EF) analysis of extra virgin olive oil (EVOO) produced in the Province of Perugia (Umbria, Italy) is assessed. In this study, olive orchard cultivation, EVOO extraction, bottling, packaging, storage at -18°C and distribution in the main importing countries were studied from a life cycle assessment perspective, with the main objective of identifying the processes with the largest environmental impacts. The selected functional unit was 1L of EVOO, packaged for distribution. Inventory data was gathered mainly through both direct communication using questionnaires and direct measurements. To determine the CF the ISO/TS 14067:2013 was followed while the EF was evaluated according to ISO standards 14040 and 14044. Results showed that the most impacting process is the distribution, mainly due to the choice of employing air transport. The main other hot spots identified were the olive orchard fertilization, EVOO freezing during its storage at the olive mill factory and the manufacture of glass bottles. Suggested improvement opportunities included shifts in the EVOO transportation policy, the introduction of lighter glass bottles in the bottling process, the use of cooling agent with lower global warming potential and the employment of biodiesel in the farming machineries.

Migration kinetics of mineral oil hydrocarbons from recycled paperboard to dry food: monitoring of two real cases.

Mineral oil hydrocarbons present in printing inks and recycled paper migrate from paper-based food packaging to foods primarily through the gas phase. Migration from two commercial products packed in recycled paperboard, i.e. muesli and egg pasta, was monitored up to the end of their shelf life (1 year) to study the influence of time, storage conditions, food packaging structure and temperature. Mineral oil saturated and aromatic hydrocarbons (MOSH and MOAH, respectively), and diisopropyl naphthalenes (DIPN) were monitored using online HPLC-GC/FID. Storage conditions were: free standing, shelved, and packed in transport boxes of corrugated board, to represent domestic, supermarket and warehouse storage, respectively. Migration to food whose packs were kept in transport boxes was the highest, especially after prolonged storage, followed by shelved and free-standing packs. Tested temperatures were representative of refrigeration, room temperature, storage in summer months and accelerated migration testing. Migration was strongly influenced by temperature: for egg pasta directly packed in paperboard, around 30 mg kg⁻¹ of MOSH migrated in 8 months at 20°C, but in only 1 week at 40°C. Muesli was contained into an internal polyethylene bag, which firstly adsorbed hydrocarbons and later released them partly towards the food. Differently, the external polypropylene bag, containing pasta and recycled paper tray, strongly limited the migration towards the atmosphere and gave rise to the highest level of food contamination. Tests at increased temperatures not only accelerated migration, but also widened the migration of hydrocarbons to higher molecular masses, highlighting thus a difficult interpretation of data from accelerated simulation.

Saturated and aromatic mineral oil hydrocarbons from paperboard food packaging: estimation of long-term migration from contents in the paperboard and data on boxes from the market.

In the absence of a functional barrier, mineral oil hydrocarbons from printing inks and recycled fibres tend to migrate from paper-based food-packaging materials through the gas phase into dry food. Concentrations easily far exceed the limit derived from the acceptable daily intake (ADI) of the Joint FAO/WHO Expert Committee on Food Additives (JECFA). Since the estimation of long-term migration into the food by testing at 40°C for 10 days is difficult, it seems preferable (and easier) to use the mineral oil content in the paperboard. Evaporation experiments showed that hydrocarbons eluted up to about n-C24 are sufficiently volatile for relevant migration into dry food: in worst-case situations, about 80% migrate into the packed food. The extraction of the paperboard was optimised to give good recovery of the relevant hydrocarbons, but to discriminate against those of high molecular mass which tend to disturb gas chromatographic analysis in on-line coupled normal phase HPLC-GC-FID. Even though some of the relevant hydrocarbons had already evaporated, the average concentration of < C24 mineral oil saturated hydrocarbons (MOSH) in the paperboard boxes of 102 products from the Swiss and Italian market was 626 mg kg⁻¹. Nearly 15% of investigated boxes still contained more than 1000 mg kg⁻¹ < C24 MOSH up to over 3000 mg kg⁻¹ (maximum = 3500 mg kg⁻¹). This amount of MOSH in the board have the potential of contaminating the packed food at a level exceeding the limit, derived from the JECFA ADI, hundreds of times.

Real-time PCR and enzyme-linked fluorescent assay methods for detecting Shiga-toxin-producing Escherichia coli in mincemeat samples.

This work aimed to compare real-time polymerase chain reaction (PCR) with the commercially available enzyme-linked fluorescent assay (ELFA) VIDAS ECOLI O157 for detecting Escherichia coli O157 in mincemeat. In addition, a PCR-based survey on Shiga-toxin-producing E. coli (STEC) in mincemeat collected in Italy is presented. Real-time PCR assays targeting the stx genes and a specific STEC O157 sequence (SILO157, a small inserted locus of STEC O157) were tested for their sensitivity on spiked mincemeat samples. After overnight enrichment, the presence of STEC cells could be clearly determined in the 25 g samples containing 10 bacterial cells, while the addition of five bacteria provided equivocal PCR results with Ct values very close to or above the threshold of 40. The PCR tests proved to be more sensitive than the ELFA-VIDAS ECOLI O157, whose detection level started from 50 bacterial cells/25 g of mincemeat. The occurrence of STEC in 106 mincemeat (bovine, veal) samples collected from September to November 2004 at five different points of sale in Italy (one point of sale in Arezzo, Tuscany, central Italy, two in Mantova, Lombardy, Northern Italy, and two in Bologna, Emilia-Romagna, upper-central Italy) was less than 1%. Contamination by the main STEC O-serogroups representing a major public health concern, including O26, O91, O111, O145, and O157, was not detected. This survey indicates that STEC present in these samples are probably not associated with pathogenesis in humans.

Validation of a PCR-based method for detection of food-borne thermotolerant campylobacters in a multicenter collaborative trial.

A PCR-based method for rapid detection of food-borne thermotolerant campylobacters was evaluated through a collaborative trial with 12 laboratories testing spiked carcass rinse samples. The method showed an interlaboratory diagnostic sensitivity of 96.7% and a diagnostic specificity of 100% for chicken samples, while these values were 94.2 and 83.3%, respectively, for pig samples.

Human herpesvirus 8 seropositivity and risk of Kaposi's sarcoma and other acquired immunodeficiency syndrome-related diseases.

BACKGROUND: The incidence of Kaposi's sarcoma (KS) is increased severalfold in individuals infected with human immunodeficiency virus-1 (HIV). Human herpesvirus 8 (HHV8) has also been implicated in KS. We investigated several factors that may determine the onset of KS, particularly HHV8 infection in individuals after becoming seropositive for HIV. METHODS: We studied 366 individuals belonging to different HIV-exposure categories (i.e., homosexual activity, intravenous drug use, and heterosexual contact) for whom a negative HIV serologic test and then a positive HIV serologic test were available within a 2-year period. HHV8 antibody testing was performed by use of an immunofluorescence assay on the first serum sample available after the first positive HIV test. Actuarial rates of progression of KS and of other acquired immunodeficiency syndrome (AIDS)-defining diseases were estimated by use of time-to-event statistical methods. All statistical tests were two-sided. RESULTS: Twenty-one of the 366 study participants developed AIDS-related KS, and 83 developed AIDS without KS. One hundred forty (38.3%) participants had detectable anti-HHV8 antibodies. The actuarial progression rate to KS among persons co-infected with HIV/HHV8 was nearly 30% by 10 years after HIV seroconversion. Increasing HHV8 antibody titers increased the risk of developing KS (for seronegative versus highest titer [1:125 serum dilution], adjusted relative hazard [RH] = 51.82; 95% confidence interval [CI] = 6.08-441.33) but not of other AIDS-defining diseases (adjusted RH = 1.14; 95% CI = 0.72-1.80). HHV8-seropositive homosexual men compared with HHV8-seropositive participants from other HIV-exposure categories showed an increased risk of KS that approached statistical significance (adjusted RH = 6.93; 95% CI = 0.88-54.84). CONCLUSIONS: Approximately one third of individuals co-infected with HIV/HHV8 developed KS within 10 years after HIV seroconversion. Progression to KS increased with time after HIV seroconversion. Higher antibody titers to HHV8 appear to be related to faster progression to KS but not to other AIDS-defining diseases.

Serum IgG antibodies to human herpesvirus-6 (HHV-6) do not predict the progression of HIV disease to AIDS. Italian Seroconversion Study group.

OBJECTIVES: To evaluate if different levels of human herpesvirus 6 (HHV-6) antibodies can predict HIV disease progression. DESIGN: Longitudinal study of individuals with a documented date of HIV seroconversion. SETTING: Clinical centers located throughout Italy. PATIENTS: Individuals who serconverted for HIV between 1983 and 1995 in Italy. METHODS: Sera were tested for IgG antibodies to HHV-6 using a commercial enzyme immunoassay. A serum sample with an optical density (OD) > or =242 (i.e. the mean value of 10 negative controls +4x standard deviation) was considered as HHV-6 positive; the progression of HIV disease was evaluated estimating the relative hazards (RH) of AIDS (by Cox models) for individuals with higher levels vs. lower levels of HHV-6 antibodies or considering levels of antibodies based on 10% increase of the distribution (deciles). Rates of CD4 decline fitting linear regression were also estimated. RESULTS: A total of 381 persons were followed for a median time of 4 years (range: 0.15-9 years) following the date of collection of the serum sample. The median OD value of HHV-6 antibodies was 306, with an interquartile range of 241-440 and a range of 48-2330. A slight inverse correlation was found between HHV-6 antibody levels and age of the individual at the time of serum collection (Spearman rank correlation coefficient, -0.16; p = 0.0013). No association was found between HHV-6 and CD4 level or between HHV-6 and CD8 level at the date of serum collection. The unadjusted RH of progression to AIDS was 0.63 (95% CI: 0.42-0.96) for HHV-6 positive individuals vs. HHV-6 negative; when adjusting for possible confounders (CD4, age, pre-AIDS HIV-related pathologies at the date of sera collection, and previous anti-herpes treatment), the RH of AIDS increased to 0.80 (95% CI: 0.51-1.23). No particular association with HIV disease progression was found when using the deciles of the distribution of HHV-6 antibodies. The median CD4 cell loss was 5.0x10(6) cells/l per month among HHV-6 positive individuals and 5.7x10(6) cells/l per month among the others. CONCLUSIONS: The presence of high levels of HHV-6 antibodies does not seem to predict the clinical or immunologic progression of HIV disease.

Herpes zoster and progression to AIDS in a cohort of individuals who seroconverted to human immunodeficiency virus. Italian HIV Seroconversion Study.

A prospective study of 1,198 individuals who seroconverted to human immunodeficiency virus (HIV) was conducted to estimate the incidence and determinants of herpes zoster and to determine whether herpes zoster can accelerate the progression to AIDS. Herpes zoster was diagnosed for 48 individuals (4%). After adjusting for the CD4 cell count, individuals acquiring HIV infection through sexual contact were more likely to have herpes zoster than were injection drug users (relative hazard, 1.50). The crude relative hazard of AIDS for individuals who had herpes zoster compared with those without herpes zoster was 2.44; the adjusted relative hazard was 1.08. After adjusting for the CD4 cell count, fever was the only specific characteristic of herpes zoster that was significantly associated with a more rapid progression to AIDS (relative hazard, 6.52). Data suggest that herpes zoster occurs more frequently in individuals acquiring HIV infection through sexual transmission. There was no evidence that herpes zoster per se is an independent cofactor of progression of HIV disease, although febrile episodes of herpes zoster may predict a faster progression to AIDS.

[Adhesive peritonitis caused by a foreign body. A case report]. / Peritoniti plastiche da corpo estraneo. Caso clinico.

After investigation of the international literature on this subject, the authors describe a case report of adhesive-stenotic and retractile peritonitis, very likely caused bt a foreign body reaction (surgical stitches, gloves, rice powder, etc.?). This case-report is interesting both to remember the existence of this pathology and to limit its iatrogenic development. In conclusion, it is advisable to wash surgical gloves with sterile solutions and to limit enlarged bowel resections mostly in young people.

[Prognostic significance of cell-mediated immune response in patients with colorectal carcinoma. Preliminary results]. / Significato prognostico della risposta immunitaria cellulo-mediata in pazienti affetti da carcinoma colo-rettale. Risultati preliminari.

Pre-operative skin test response has been evaluated in 50 cases of colorectal carcinoma. Cellular defense's depression was correlated with tumoral staging (p = < 0.001). In B2 and C groups, a higher incidence of metastatic and local recurrences was registered in subjects with low response. These last are suitable for a randomized trial including immunotherapy.

[The immunogenicity of the hepatitis B vaccine in drug addicts with human immunodeficiency virus infection]. / Immunogenicità del vaccino anti-epatite B in tossicodipendenti con infezione da virus dell'immunodeficienza umana.

In order to evaluate the antibody response to anti-hepatitis B vaccine, 21 heroin addicted with HIV infection previously vaccinated, were studied. 18 patients were asymptomatic and 3 were at the LAS stage. An antibody response was estimated at 1 and 12 months after the end of the vaccination. The first control showed that 62% presented a protective anti-HBs (higher than 10 mU/ml); after one year 70% of responders had a persistent immunity. The antibody response showed no correlation with the value of immunologic tests; the vaccine showed neither a significant evidence of side-effects nor a negative influence on the HIV infection.