A multicenter study on accuracy and reproducibility of nanopore sequencing-based genotyping of bacterial pathogens.

Nanopore sequencing has shown the potential to democratize genomic pathogen surveillance due to its ease of use and low entry cost. However, recent genotyping studies showed discrepant results compared to gold-standard short-read sequencing. Furthermore, although essential for widespread application, the reproducibility of nanopore-only genotyping remains largely unresolved. In our multicenter performance study involving five laboratories, four public health-relevant bacterial species were sequenced with the latest R10.4.1 flow cells and V14 chemistry. Core genome MLST analysis of over 500 data sets revealed highly strain-specific typing errors in all species in each laboratory. Investigation of the methylation-related errors revealed consistent DNA motifs at error-prone sites across participants at read level. Depending on the frequency of incorrect target reads, this either leads to correct or incorrect typing, whereby only minimal frequency deviations can randomly determine the final result. PCR preamplification, recent basecalling model updates and an optimized polishing strategy notably diminished the non-reproducible typing. Our study highlights the potential for new errors to appear with each newly sequenced strain and lays the foundation for computational approaches to reduce such typing errors. In conclusion, our multicenter study shows the necessity for a new validation concept for nanopore sequencing-based, standardized bacterial typing, where single nucleotide accuracy is critical.

Temperatures above 37°C increase virulence of a convergent Klebsiella pneumoniae sequence type 307 strain.

Background: Convergence of Klebsiella pneumoniae (KP) pathotypes has been increasingly reported in recent years. These pathogens combine features of both multidrug-resistant and hypervirulent KP. However, clinically used indicators for hypervirulent KP identification, such as hypermucoviscosity, appear to be differentially expressed in convergent KP, potential outbreak clones are difficult to identify. We aimed to fill such knowledge gaps by investigating the temperature dependence of hypermucoviscosity and virulence in a convergent KP strain isolated during a clonal outbreak and belonging to the high-risk sequence type (ST)307. Methods: Hypermucoviscosity, biofilm formation, and mortality rates in Galleria mellonella larvae were examined at different temperatures (room temperature, 28°C, 37°C, 40°C and 42°C) and with various phenotypic experiments including electron microscopy. The underlying mechanisms of the phenotypic changes were explored via qPCR analysis to evaluate plasmid copy numbers, and transcriptomics. Results: Our results show a temperature-dependent switch above 37°C towards a hypermucoviscous phenotype, consistent with increased biofilm formation and in vivo mortality, possibly reflecting a bacterial response to fever-like conditions. Furthermore, we observed an increase in plasmid copy number for a hybrid plasmid harboring carbapenemase and rmpA genes. However, transcriptomic analysis revealed no changes in rmpA expression at higher temperatures, suggesting alternative regulatory pathways. Conclusion: This study not only elucidates the impact of elevated temperatures on hypermucoviscosity and virulence in convergent KP but also sheds light on previously unrecognized aspects of its adaptive behavior, underscoring its resilience to changing environments.

Plasma-Activated Tap Water with Oxidative Potential Has an Inactivating Effect on Microbiological Contaminants in Aqueous Suspensions.

Plasma-activated water (PAW) generated from tap water has gained attention as a disinfectant when used directly in its pure form. Little is known about the application of PAW for bacterial inactivation in aqueous environments because its use in fluids results in dilutions. We investigated the effect of PAW in aqueous suspensions simulating such dilutions, and we focused on the minimal addition of PAW volumes to bacterial aqueous suspensions still resulting in high inactivation rates. The antimicrobial effect was highly dependent on the activation of PAW. An increase in activation power from 90 to 100 W resulted in a greater microbial reduction with an identical 10 min activation time. The susceptibility to PAW dilutions was analyzed in detail regarding nine Gram-negative species out of Enterobacterales and other waterborne microorganisms as well as four Gram-positive species present in two different matrices, in saline and in tap water, at high concentrations simulating massive contamination situations. For this purpose, the PAW activation setting of 90 W and 30 min was defined in order to be able to differentiate the limitations of inactivation in individual bacterial species. The Gram-negatives in saline demonstrated susceptibility when one volume unit of PAW was added. However, twice the PAW volume was necessary for inactivation when bacteria were present in tap water. Gram-positive microorganisms were more robust, indicated by prolonged contact times before inactivation. Our results indicate that PAW can be used for bacterial decontamination processes in aqueous environments when added in surplus. Optimized activation settings such as electric power to generate PAW and the contact times to the samples increase the effect of the inactivation a wide range of bacteria, regardless of their resistance profiles.

Colostrum as a source of ESBL-Escherichia coli in feces of newborn calves.

The aim of the present study was to determine if colostrum and the equipment for harvesting and feeding colostrum are sources of fecal ESBL/AmpC-producing Escherichia coli (ESBL/AmpC-E. coli) in calves. Therefore, 15 male calves fed with pooled colostrum on a dairy farm and held individually in an experimental barn, the colostrum pool and the equipment for harvesting and feeding colostrum were sampled and analyzed for the occurrence of ESBL/AmpC-E. coli. The ESBL-AmpC-E. coli suspicious isolates were subjected to whole-genome sequence analysis. Forty-three of 45 fecal samples were tested positive for ESBL/AmpC-E. coli. In the colostrum sample and in the milking pot, we also found ESBL/AmpC-E. coli. All 45 E. coli isolates were ESBL-producers, mainly commensal sequence type (ST) 10, but also human-extraintestinal pathogenic E. coli ST131 and ST117 were found. The clonal identity of six fecal isolates with the ESBL-E. coli isolate from the colostrum and of five fecal isolates with the strain from the milking pot demonstrates that the hygiene of colostrum or the colostrum equipment can play a significant role in the spread of ESBL-E. coli. Effective sanitation procedures for colostrum harvesting and feeding equipment are crucial to reduce the ESBL-E. coli shedding of neonatal dairy calves.

Klebsiella pneumoniae exhibiting a phenotypic hyper-splitting phenomenon including the formation of small colony variants.

In this study, we characterized a Klebsiella pneumoniae strain in a patient with shrapnel hip injury, which resulted in multiple phenotypic changes, including the formation of a small colony variant (SCV) phenotype. Although already described since the 1960s, there is little knowledge about SCV phenotypes in Enterobacteriaceae. The formation of SCVs has been recognized as a bacterial strategy to evade host immune responses and compromise the efficacy of antimicrobial therapies, leading to persistent and recurrent courses of infections. In this case, 14 isolates with different resisto- and morpho-types were distinguished from the patient's urine and tissue samples. Whole genome sequencing revealed that all isolates were clonally identical belonging to the K. pneumoniae high-risk sequence type 147. Subculturing the SCV colonies consistently resulted in the reappearance of the initial SCV phenotype and three stable normal-sized phenotypes with distinct morphological characteristics. Additionally, an increase in resistance was observed over time in isolates that shared the same colony appearance. Our findings highlight the complexity of bacterial behavior by revealing a case of phenotypic "hyper-splitting" in a K. pneumoniae SCV and its potential clinical significance.

Clinical Manifestations of Infections with the Omicron Sub-Lineages BA.1, BA.2, and BA.5: A Retrospective Follow-Up Analysis of Public Health Data from Mecklenburg-Western Pomerania, Germany.

The Omicron variants BA.1, BA.2, and BA.5 caused several waves of SARS-CoV-2 in Germany in 2022. In this comparative study, public health data on SARS-CoV-2 infections from Mecklenburg-Western Pomerania, Germany, between January and October 2022 were examined retrospectively using Pearson's chi-squared tests and Fisher's exact tests for testing for statistical significance. Compared to BA.5 infections, BA.1 and BA.2 infections affected younger individuals aged up to 19 years significantly more often, whereas BA.5 infections occurred significantly more frequently in patients between 40 and 59 years of age when compared to BA.1 and BA.2. Infections with all three variants predominantly caused flu-like symptoms; nevertheless, there were significant differences between the reported symptoms of BA.1, BA.2, and BA.5 infections. Especially, the symptoms of 'fever', 'severe feeling of sickness', 'loss of taste', and 'loss of smell' were significantly more often present in patients with BA.5 infections compared to BA.1 and BA.2 cases. Additionally, BA.2 and BA.5 cases reported significantly more often the symptoms of 'runny nose' and 'cough' than BA.1-infected cases. Our findings indicate remarkable differences in the clinical presentations among the sub-lineages, especially in BA.5 infections. Furthermore, the study demonstrates a powerful tool to link epidemiological data with genetic data in order to investigate their potential impact on public health.

Case Report: Hip arthroplasty after fracture-related joint infection caused by extensively drug-resistant Klebsiella pneumoniae.

This case-report focuses on a 23-year-old soldier suffering from a fracture-related hip joint infection (FRI) due to extensively drug-resistant Klebsiella pneumoniae and S. epidermidis. The patient underwent multiple septic revision surgeries including the removal of remaining shrapnel accompanied by last-resort antimicrobial therapy with cefiderocol and colistin. Additionally, the surgeries included repeated tissue sampling for microbiological and histopathological analysis. An antibiotic-loaded cemented filler containing cefiderocol was used to improve local antimicrobial therapy. The biopsies prior to and during hip replacement surgery confirmed successful microbe eradication. Hip arthroplasty restored hip joint function and significantly improved patient's quality of life. The utilization of a trabecular metal shell and a meta-diaphyseally anchored cementless hip stem ensured secure implant fixation and early patient mobilisation. An adjusted biofilm active oral antimicrobial therapy after arthroplasty intervention was continued to prevent early periprosthetic joint infection. This case emphasizes the difficulties of managing FRI and multidrug-resistant pathogens. It contributes valuable insight into navigating complex orthopedic cases while ensuring successful hip arthroplasty outcomes. In conclusion, early interdisciplinary collaboration, appropriate antimicrobial therapy along with tailored surgical interventions are crucial for managing such complex cases successfully.

Left ventricular assist device-associated driveline infections as a specific form of complicated skin and soft tissue infection/acute bacterial skin and skin structure infection - issues and therapeutic options.

PURPOSE OF REVIEW: This review comments on the current guidelines for the treatment of wound infections under definition of acute bacterial skin and skin structure infections (ABSSSI). However, wound infections around a catheter, such as driveline infections of a left ventricular assist device (LVAD) are not specifically listed under this definition in any of the existing guidelines. RECENT FINDINGS: Definitions and classification of LVAD infections may vary across countries, and the existing guidelines and recommendations may not be equally interpreted among physicians, making it unclear if these infections can be considered as ABSSSI. Consequently, the use of certain antibiotics that are approved for ABSSSI may be considered as 'off-label' for LVAD infections, leading to rejection of reimbursement applications in some countries, affecting treatment strategies, and hence, patients' outcomes. However, we believe driveline exit site infections related to LVAD can be included within the ABSSSI definition. SUMMARY: We argue that driveline infections meet the criteria for ABSSSI which would enlarge the 'on-label' antibiotic armamentarium for treating these severe infections, thereby improving the patients' quality of life.

A brief history of metal recruitment in protozoan predation.

Metals and metalloids are used as weapons for predatory feeding by unicellular eukaryotes on prokaryotes. This review emphasizes the role of metal(loid) bioavailability over the course of Earth's history, coupled with eukaryogenesis and the evolution of the mitochondrion to trace the emergence and use of the metal(loid) prey-killing phagosome as a feeding strategy. Members of the genera Acanthamoeba and Dictyostelium use metals such as zinc (Zn) and copper (Cu), and possibly metalloids, to kill their bacterial prey after phagocytosis. We provide a potential timeline on when these capacities first evolved and how they correlate with perceived changes in metal(loid) bioavailability through Earth's history. The origin of phagotrophic eukaryotes must have postdated the Great Oxidation Event (GOE) in agreement with redox-dependent modification of metal(loid) bioavailability for phagotrophic poisoning. However, this predatory mechanism is predicted to have evolved much later - closer to the origin of the multicellular metazoans and the evolutionary development of the immune systems.

Expert guidance on target product profile development for AMR diagnostic tests.

Diagnostics are widely considered crucial in the fight against antimicrobial resistance (AMR), which is expected to kill 10 million people annually by 2030. Nevertheless, there remains a substantial gap between the need for AMR diagnostics versus their development and implementation. To help address this problem, target product profiles (TPP) have been developed to focus developers' attention on the key aspects of AMR diagnostic tests. However, during discussion between a multisectoral working group of 51 international experts from industry, academia and healthcare, it was noted that specific AMR-related TPPs could be extended by incorporating the interdependencies between the key characteristics associated with the development of such TPPs. Subsequently, the working group identified 46 characteristics associated with six main categories (ie, Intended Use, Diagnostic Question, Test Description, Assay Protocol, Performance and Commercial). The interdependencies of these characteristics were then identified and mapped against each other to generate new insights for use by stakeholders. Specifically, it may not be possible for diagnostics developers to achieve all of the recommendations in every category of a TPP and this publication indicates how prioritising specific TPP characteristics during diagnostics development may influence (or not) a range of other TPP characteristics associated with the diagnostic. The use of such guidance, in conjunction with specific TPPs, could lead to more efficient AMR diagnostics development.

Detection, Identification and Diagnostic Characterization of the Staphylococcal Small Colony-Variant (SCV) Phenotype.

While modern molecular methods have decisively accelerated and improved microbiological diagnostics, phenotypic variants still pose a challenge for their detection, identification and characterization. This particularly applies if they are unstable and hard to detect, which is the case for the small-colony-variant (SCV) phenotype formed by staphylococci. On solid agar media, staphylococcal SCVs are characterized by tiny colonies with deviant colony morphology. Their reduced growth rate and fundamental metabolic changes are the result of their adaptation to an intracellular lifestyle, regularly leading to specific auxotrophies, such as for menadione, hemin or thymidine. These alterations make SCVs difficult to recognize and render physiological, biochemical and other growth-based methods such as antimicrobial susceptibility testing unreliable or unusable. Therefore, diagnostic procedures require prolonged incubation times and, if possible, confirmation by molecular methods. A special approach is needed for auxotrophy testing. However, standardized protocols for SCV diagnostics are missing. If available, SCVs and their putative parental isolates should be genotyped to determine clonality. Since their detection has significant implications for the treatment of the infection, which is usually chronic and relapsing, SCV findings should be specifically reported, commented on, and managed in close collaboration with the microbiological laboratory and the involved clinicians.

Neighbourhood watch: genomic epidemiology of SARS-CoV-2 variants circulating in a German federal state, Mecklenburg-Western Pomerania, in 2020-2022.

ABSTRACTGlobal and even national genome surveillance approaches do not provide the resolution necessary for rapid and accurate direct response by local public health authorities. Hence, a regional network of microbiological laboratories in collaboration with the health departments of all districts of the German federal state of Mecklenburg-Western Pomerania (M-V) was formed to investigate the regional molecular epidemiology of circulating SARS-CoV-2 lineages between 11/2020 and 03/2022. More than 4750 samples from all M-V counties were sequenced using Illumina and Nanopore technologies. Overall, 3493 (73.5%) sequences fulfilled quality criteria for time-resolved and/or spatially-resolved maximum likelihood phylogenic analyses and k-mean/ median clustering (KMC). We identified 116 different Pangolin virus lineages that can be assigned to 16 Nextstrain clades. The ten most frequently detected virus lineages belonged to B.1.1.7, AY.122, AY.43, BA.1, B.1.617.2, BA.1.1, AY.9.2, AY.4, P.1 and AY.126. Time-resolved phylogenetic analyses showed the occurrence of virus clades as determined worldwide, but with a substantial delay of one to two months. Further spatio-temporal phylogenetic analyses revealed a regional outbreak of a Gamma variant limited to western M-V counties. Finally, KMC elucidated a successive introduction of the various virus lineages into M-V, possibly triggered by vacation periods with increased (inter-) national travel activities. The COVID-19 pandemic in M-V was shaped by a combination of several SARS-CoV-2 introductions, lockdown measures, restrictive quarantine of patients and the lineage specific replication rate. Complementing global and national surveillance, regional surveillance adds value by providing a higher level of surveillance resolution tailored to local health authorities.

CHROMAgar™ LIN-R as an efficient screening tool to assess the prevalence of linezolid-resistant enterococci in German hospital patients-a multicentre study approach, 2021-2022.

BACKGROUND: In recent years, an increasing number of linezolid-resistant enterococci (LRE) was recognized at the German National Reference Centre (NRC) for Enterococci. National guidelines on infection prevention recommend screening for LRE in epidemiologically linked hospital settings without referring to a reliable and rapid diagnostic method. Since 2020, CHROMAgar™ provide a chromogenic linezolid screening agar, LIN-R, suitable to simultaneously screen for linezolid-resistant staphylococci and enterococci. OBJECTIVES: To assess the applicability of CHROMAgar™ LIN-R in clinical settings for detecting LRE directly from patient material and to infer prevalence rates of LRE amongst German hospital patients. METHODS: During the 3-month trial period, clinical samples were plated on CHROMAgar™ LIN-R. Antimicrobial susceptibility testing was performed using VITEK2 or disc diffusion. At the NRC, linezolid resistance was determined by broth microdilution, multiplex-PCR for cfr/optrA/poxtA and by a restriction-based assay for 23S rDNA mutations. RESULTS: The 12 participating study sites used 13 963 CHROMAgar™ LIN-R plates during the study period. Of 442 presumptive LRE, 192 were confirmed by phenotypic methods. Of these, 161 were received by the NRC and 121 (75%) were verified as LRE. Most of LR-E. faecium 53/81 (65%) exhibited a 23S rRNA gene mutation as the sole resistance-mediating mechanism, whereas optrA constituted the dominant resistance trait in LR-E. faecalis [39/40 (98%)]. Prevalence of LRE across sites was estimated as 1% (ranging 0.18%-3.7% between sites). CONCLUSIONS: CHROMAgar™ LIN-R represents a simple and efficient LRE screening tool in hospital settings. A high proportion of false-positive results demands validation of linezolid resistance by a reference method.

Evaluation of an Automated System for the Counting of Microbial Colonies.

Counting of microbial colonies is a common technique employed in research and diagnostics. To simplify this tedious and time-consuming process, automated systems have been proposed. This study aimed to elucidate the reliability of automated colony counting. We evaluated a commercially available instrument (UVP ColonyDoc-It Imaging Station) in regard to its accuracy and potential time savings. Suspensions of Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, Enterococcus faecium, and Candida albicans (n = 20 each) were adjusted to achieve growth of approximately 1,000, 100, 10, and 1 colony per plate, respectively, after overnight incubation on different solid media. Compared with manual counting, each plate was automatically counted by the UVP ColonyDoc-It with and without visual adjustment on a computer display. For all bacterial species and concentrations automatically counted without visual correction, an overall mean difference from manual counts of 59.7%, a proportion of isolates with overestimation/underestimation of colony numbers of 29%/45%, respectively, and only a moderate relationship (R2 = 0.77) with the manual counting were shown. Applying visual correction, the overall mean difference from manual counts was 1.8%, the proportion of isolates with overestimation/underestimation of colony numbers amounted to 2%/42%, respectively, and a strong relationship (R2 = 0.99) with the manual counting was observed. The mean time needed for manual counting compared with automated counting without and with visual correction was 70 s, 30 s, and 104 s, respectively, for bacterial colonies through all concentrations tested. Generally, similar performance regarding accuracy and counting time was observed with C. albicans. In conclusion, fully automatic counting showed low accuracy, especially for plates with very high or very low colony numbers. After visual correction of the automatically generated results, the concordance with manual counts was high; however, there was no advantage in reading time. IMPORTANCE Colony counting is a widely utilized technique in the field of microbiology. The accuracy and convenience of automated colony counters are essential for research and diagnostics. However, there is only sparse evidence on performance and usefulness of such instruments. This study examined the current state of reliability and practicality of the automated colony counting with an advanced modern system. For this, we thoroughly evaluated a commercially available instrument in terms of its accuracy and counting time required. Our findings indicate that fully automatic counting resulted in low accuracy, particularly for plates with very high or very low colony numbers. Visual correction of the automated results on a computer screen improved concordance with manual counts, but there was no benefit in counting time.

Evaluation of a Novel Benchtop Tool for Acceleration of Sample Preparation for MALDI-TOF Mass Spectrometry.

During the past decade, MALDI-TOF mass spectrometry (MS) has become a standard method for identification of bacteria and yeasts. Nonetheless, further optimization of the identification process is important to streamline workflows and save resources. This study evaluated the application of a multipurpose benchtop tool, MBT FAST Shuttle IVD, for accelerated drying of liquid assay components (matrix, formic acid, and/or sample) on a MALDI target. A total of 50 bacterial and fungal isolates were subjected to three different sample preparation procedures prior to the identification by MALDI-TOF MS: direct transfer (DT), extended direct transfer (eDT), and protein extraction (PE). Compared to conventional drying at room temperature, the preparation was performed with standardized heating of the MALDI target on the MBT FAST Shuttle. During DT, eDT, and PE, 56.7% (P < 0.001), 56.8% (P < 0.001), and 52.8% (P < 0.001) of time for matrix drying were saved by using the MBT FAST Shuttle, respectively. Applying the MBT FAST Shuttle, 57.5% (P < 0.001) of time for drying of formic acid were saved for eDT and 57.5% (P < 0.001) of time for sample drying were saved for PE. A significant improvement of the identification rates and scores was observed with MBT FAST Shuttle for eDT (P = 0.001) and PE (P = 0.008) methods, while the effect on identification quality for DT was not statistically significant (P = 0.16). In conclusion, the use of the MBT FAST Shuttle shortened the drying time of assay components by about a half for all preparation methods. Moreover, positive effect on identification success was observed.

ATTR- and AFib amyloid - two different types of amyloid in the annular ligament of trigger finger.

INTRODUCTION: Histological examination of tissue specimens obtained during surgical treatment of trigger finger frequently encountered unclassifiable amyloid deposits in the annular ligament. We systematically explored this unknown type by a comprehensive analysis using histology, immunohistochemistry, and quantitative mass spectrometry-based proteomics. METHODS: 205 tissue specimens of annular ligaments were obtained from 172 patients. Each specimen was studied by histology and immunohistochemistry. Tissue specimens obtained from ten patients with histology proven amyloid in annular ligament were analysed by label-free quantitative proteomics. Histological and immunohistochemical findings were correlated with patient demographics. RESULTS: Amyloid was present as band like deposits along the surface of annular ligament, dot like or patchy deposits within the matrix. Immunohistochemistry identified ATTR amyloid in 92 specimens (mostly patchy in the matrix), while the band like deposits of 100 specimens remained unclassifiable. Proteomic profiles identified the unknown amyloid as most likely of fibrinogen origin. The complete cohort was re-examined by immunohistochemistry using a custom-made antibody and confirmed the presence of fibrinogen alpha-chain (FGA) in a hitherto unclassifiable type of amyloid in annular ligament. CONCLUSION: Our study shows that two different types of amyloid affect the annular ligament, ATTR amyloid and AFib amyloid, with distinct demographic patient characteristics and histomorphological deposition patterns.

[The complexity of hand-surgical procedures in the context of cross-sector care concepts: a consensus recommendation of the German Society of Hand Surgery] / Die Komplexität handchirurgischer Therapien im Kontext sektorenübergreifender Versorgungskonzepte: Konsensusempfehlung der Deutschen Gesellschaft für Handchirurgie.

Overboarding politcal influence in Germany concerning medical issues has come to a new peak. The report by the IGES Institute published in 2022 made an important contribution in this regard. Unfortunately, only that part of the recommendations of this report were implemented in a new version of the contract for outpatient surgery according to Section 115b SGB V (AOP contract), that called for an expansion of outpatient surgery. In particular, those aspects that are important from a medical point of view for a patient-specific adjustment of outpatient surgery (e. g. old age, frailty, comorbidities) as well as the important structural requirements for outpatient postoperative care were included in the new AOP contract at best in a rudimentary manner. For this reason, the German Society for Hand Surgery felt compelled to give its members a recommendation as to which medical aspects must be taken into account, especially when performing hand surgery operations, in order to ensure the highest level of safety for the patients entrusted to us while performing outpatient surgery. An expert group of experienced hand surgeons and hand therapists who work in hospitals of all levels of care as well as resident surgeons was formed in order to formulate mutually agreed recommendations for action.