Gamification and Serious Games in Orthopedic Education: A Systematic Review.

Gamification and serious games have successfully been used in surgical specialties to improve technical skills related to systematic procedures. However, the use of gamified education material has remained limited in orthopedic residency training. The objective of this systematic review is to summarize the current use, development, and future directions of gamification for developing orthopedic skills. A comprehensive literature search was performed on Ovid MEDLINE, Web of Science, and Scopus between January 1, 2012, and the search date of July 1, 2023. After screening 1,915 papers, a total of four publications that utilized elements of gamification in acquiring and/or improving orthopedic skills were included. Three studies showed a positive correlation between video gaming experience and orthopedic skill performance, acquisition, or both. One study showed a positive response from residents when training sessions were hosted in a competitive, but friendly environment with direct observation from their attendings. Gamified learning has the potential to improve orthopedic education, but its current use is largely unexplored. A competitive or rewarding environment promotes engagement and active learning. To enable the highest and most efficient level of training, future development should be geared toward virtual reality simulators that incorporate haptic feedback to better simulate other orthopedic-based tasks.

Normative contact mechanics of the ankle Joint: Quantitative assessment utilizing bilateral weightbearing CT.

Alterations in ankle's articular contact mechanics serve as one of the fundamental causes of significant pathology. Nevertheless, computationally intensive algorithms and lack of bilateral weightbearing imaging have rendered it difficult to investigate the normative articular contact stress and side-to-side differences. The aims of our study were two-fold: 1) to determine and quantify the presence of side-to-side contact differences in healthy ankles and 2) to establish normative ranges for articular ankle contact parameters. In this retrospective comparative study, 50 subjects with healthy ankles on bilateral weight-bearing CT were confirmed eligible. Segmentation into 3D bony models was performed semi-automatically, and individualized cartilage layers were modelled based on a previously validated methodology. Contact mechanics were evaluated by using the mean and maximum contact stress of the tibiotalar articulation. Absolute and percentage reference range values were determined for the side-to-side difference. Amongst a cohort of individuals devoid of ankle pathology, mean side-to-side variation in these measurements was < 12 %, while respective differences of > 17 % talar peak stress and > 31 % talar mean stress indicate abnormality. No significant differences were found between laterality in any of the evaluated contact parameters. Understanding these values may promote a more accurate assessment of ankle joint biomechanics when distinguishing acceptable versus pathological contact mechanics in clinical practice.

Factors Associated With Symptom Recurrence After Surgical Treatment of Interdigital Neuroma: A Retrospective Chart Review of 127 Patients.

INTRODUCTION: Interdigital neuroma (IN) is a benign enlargement of tissue surrounding the common plantar digital nerve. Although the standard surgical treatment of IN remains debated, recent attention has been given to less-invasive surgical decompression by intermetatarsal ligament (IML) release with neurolysis. This study aimed to compare the outcomes of IML release with neurolysis with standard interdigital neurectomy. METHODS: A retrospective chart review was conducted on 350 consecutive patients who underwent surgical treatment of IN. Patients who satisfied our inclusion and exclusion criteria were categorized into two groups based on the surgical treatment received: IML release with neurolysis or interdigital neurectomy. Outcomes assessed included recurrence of symptoms, rate of revision surgery, and postoperative wound infection. RESULTS: Of the total sample, 40 patients (31.5%) reported recurrence of symptoms within a 12-month follow-up period. Patients who underwent IML release with neurolysis had a markedly higher recurrence rate (47.50%) than those who underwent interdigital neurectomy (24.14%). The rate of postoperative wound infection was similar between the two groups. Binary logistic regression revealed that only the surgical technique was associated with the recurrence of symptoms. Despite the higher rate of symptom recurrence in the IML release with neurolysis patient group, the rate of revision surgery in those with symptom recurrence was similar between both groups. DISCUSSION: IML release with neurolysis seems to have a higher risk of symptom recurrence than interdigital neurectomy. No patient-specific factors were identified as being associated with symptom recurrence. However, patients who did experience symptom recurrence in either surgical group had similar rates of revision surgery, which may be due to mild recurrent symptom severity in the IML release group that does not warrant revision surgery in these patients. Future studies should consider objective symptom recurrence severity and patient satisfaction. LEVEL OF EVIDENCE: Level III.

Use of Bio-integrative Screws for Fixation of Lisfranc Instability; Pros and Cons from Surgeons' Point of View in a Cadaver Study.

Objectives: Majority of Lisfranc fracture-dislocations require anatomic reduction and rigid internal fixation to prevent debilitating sequelae. Current methods include solid screws and flexible fixations which have been in use for many years. Biointegrative screw is a newer option that has not yet been thoroughly investigated for its effectiveness for Lisfranc injuries. Methods: The ligaments of the Lisfranc complex were resected in eight lower-leg cadaveric specimens. This was done by eight foot and ankle surgeons individually. Distraction forces were applied from opposite sides at the joint to replicate weight bearing conditions. Three methods of fixation - flexible fixation, metal, and biointegrative screws- were evaluated. The diastasis and area at the level of the ligament were measured at four conditions (replicated injury and each type of fixation) in neutral and distraction conditions using fluoroscopy images. The Wilcoxon test and Kruskal Wallis test were used for comparison. P value <0.05 was considered statistically significant. Results: The diastasis value for the transected ligament scenario (2.47 ± 0.51 mm) was greater than those after all three fixation methods without distraction (2.02 ± 0.5 for flexible fixation, 1.72 ± 0.63 mm for metal screw fixation and 1.67 ± 0.77 mm for biointegrative screw fixation). The transected ligament diastasis was also greater than that for metal screw (1.61 ± 1.31mm) and biointegrative screws (1.69 ± 0.64 mm) with distraction (p<0.001). The area at the level of the ligament showed higher values for transected ligament (32.7 ± 13.08 mm2) than the three fixatives (30.75 ± 7.42 mm2 for flexible fixation, 30.75 ± 17.13 mm2 for metal screw fixation and 29.53 ± 9.15 mm2 for biointegrative screw fixation; p<0.05). Conclusion: Metal screws, flexible fixation and biointegrative screws showed comparable effectiveness intra-op, in the correction of diastasis created as a consequence of Lisfranc injury.

In silico comparative biomechanical analysis of oblique and chevron medial displacement calcaneal osteotomies for pes planus deformity.

BACKGROUND: Medializing displacement calcaneal osteotomy is commonly performed as part of reconstructive surgery for patients with valgus hindfoot and progressive pes planus deformity. Among several types of calcaneal osteotomies, the oblique and Chevron osteotomy patterns have been commonly described in the literature and gained popularity as they are easily reproducible through percutaneous techniques. Currently, there is scarce evidence in the literature on which cut pattern is superior in terms of stability. To investigate the impact of cut pattern and posterior fragment medialization level on foot biomechanics, computational methods are employed. METHODS: Ankle weightbearing computer tomography (CT) scans of seven patients diagnosed with stage II pes planus deformity are segmented and converted into 3D computational models. Oblique and Chevron osteotomy patterns are modeled independently for each patient. The posterior fragments are medially translated by 8-, 10- and 12-mm and subsequently fixated to the anterior calcaneus with two screws. A total of 42 models are exported to finite element software for biomechanical simulations. Among the investigated parameters, the higher stiffness and lower von Mises stress at the osteotomy interface and the screw site are assumed to be precursors of better stability. RESULTS: It is recorded that as the medialization level increases, the stiffness decreases, and overall stresses increase. Also, it is observed that the Chevron cut produces a stiffer construct while the overall stresses are lower, indicating better stability when compared to the oblique cut. The statistical comparisons of the relevant groups that support these trends are found to be significant (p < 0.05). CONCLUSION: Chevron osteotomy showed superior stability compared to the oblique osteotomy while underscoring the negative impact of increased medialization of the posterior fragment. CLINICAL RELEVANCE: Opting for a lower medialization level and implementing the Chevron technique may facilitate union and earlier weightbearing.

Effect of sequential burr passes on minimally invasive akin and first metatarsal dorsiflexion osteotomies.

BACKGROUND: Minimally invasive surgical (MIS) osteotomies are increasing as a surgical option for treating midfoot and forefoot conditions. This study aimed to evaluate the impact of each burr pass on the degree of correction, gap size, and alignment in MIS Akin and first metatarsal dorsiflexion osteotomies (DFO). METHODS: MIS Akin and first metatarsal DFO were performed on ten cadaveric specimens. Fluoroscopic measurements included the metatarsal dorsiflexion angle (MDA), dorsal cortical length (MDCL), first phalangeal medial cortical length (PCML) and proximal to distal phalangeal articular angle (PDPAA). RESULTS: The average decrease in PCML with each burr pass was as follows: 1.53, 1.33, 1.27, 1.23 and 1.13 mm at the 1st to 5th pass, respectively. The MDCL sequentially decreased by 1.80, 1.59, 1.35, 0.75, and 0.60 mm. The MDA consistently decreased, and the PDPAA incrementally became more valgus oriented. CONCLUSION: On average, a first metatarsal dorsal wedge resection of 4.7 mm and first phalangeal medial wedge resection of 2.9 mm was achieved after 3 and 2 burr passes, respectively. This data may aid surgeons determine the optimal number of burr passes required to achieve the desired patient-specific surgical correction.

Talonavicular Osteochondral Lesions: Surgical Technique and Clinical Outcomes from the Boston and Amsterdam Perspectives.

PURPOSE: The primary purpose of the present study was to assess the patient-reported outcomes, complications, and reoperation rate of patient who underwent surgical treatment for symptomatic osteochondral lesions of the talonavicular joint (TNJ). METHODS: Patients undergoing surgical treatment for symptomatic osteochondral lesions of the TNJ with a minimum of 12-month follow-up were included. Outcomes included clinical patient-reported outcome measures (PROMs), return to sports and work outcomes, and postoperative complications or reoperations. Medical records were screened by 2 independent reviewers. Patients were contacted by phone and underwent an in-depth interview. Additionally, operative techniques for both arthroscopic and open surgical approaches for treating TNJ osteochondral lesions were described. DESIGN: Retrospective Case Series (Level IV) and Surgical Technique. RESULTS: A total of 7 patients were included with a final follow-up time of 25.4 (SD: 15.2) months follow-up. PROMs were considered satisfactory for 5 out of 7 patients, 6 out of 7 patients returned to any level of sports at a mean of 3.7 (SD: 4.2) months, and 5 out of 6 patients returned to preinjury level of sports at a mean of 14 (SD: 7.5) months. All patients returned to work at an average of 5.4 (SD: 3.6) weeks. No complications or reoperations after index surgery were reported. CONCLUSION: Surgical treatment of TNJ osteochondral lesions is a feasible procedure that may offer successful clinical, sport, and work outcomes in the majority of patients. Both open and arthroscopic surgical treatments are available and can be considered in a patient-specific treatment plan.

Comparison between achilles tendon reinsertion and dorsal closing wedge calcaneal osteotomy for the treatment of insertional achilles tendinopathy: A meta-analysis.

BACKGROUND: The debridement and Achilles tendon reinsertion (DATR) have been the most common surgical approach for the treatment of Insertional Achilles Tendinopathy (IAT), while dorsal closing wedge calcaneal osteotomy (DCWCO) has recently gained popularity as an alternative surgical option. This study aimed to systematically review the published literature on both surgical techniques and compare their clinical outcomes and complication rates. METHODS: A systematic review was performed according to the PRISMA guidelines using Medline, Embase, and Scopus databases. The inclusion criteria encompassed clinical studies reporting functional outcomes and complications, with a minimum of 10 patients and at least 12 months of follow-up. RESULTS: Seven studies (n = 169) were included for the analysis of DATR, and eight studies (n = 227) were included for the analysis of open DCWCO. Both groups showed a similar improvement in AOFAS score. The overall complication rates were 16.6% in the DATR group and 9.2% in the DCWCO group, but the difference was not statistically significant. However, there was a significantly higher incidence of wound complications in the DATR group (10.1%, 95% C.I.: 4.7-15.6) compared to the DCWCO group (2.5%, 95% C.I.: 0.6-4.4) as the confidence intervals did not overlap. CONCLUSIONS: Clinical outcomes and overall complication rates of both techniques were comparable, although DCWCO had a lower incidence of wound complications. Further research should be focused on prospective studies comparing the two techniques to corroborate the current findings. LEVEL OF EVIDENCE: Level IV; meta-analysis.

Effect of sequential burr passes on osteotomy magnitude and calcaneal morphology in minimally invasive Zadek osteotomy.

PURPOSE: This study aimed to evaluate the impact of each burr pass on degree of correction, gap size and calcaneal morphology in MIS Zadek osteotomy. METHODS: MIS Zadek osteotomy was performed on ten cadaveric specimens using a 3.1 mm Shannon burr. After each burr pass, the osteotomy gap was manually closed, and the subsequent burr passes were carried out with the foot held in dorsiflexion, which was repeated five times. Lateral X-rays were taken before and after each burr pass. Two independent reviewers measured the dorsal calcaneal length after each burr passage, as well as changes in several calcaneal parameters including X/Y ratio, Fowler Philip angle, and Böhler angle. RESULTS: The average decrease in dorsal calcaneal cortical length with each burr pass was as follows: 2.6 ± 0.9 mm at the 1st pass, 2.4 ± 1 mm at the 2nd pass, 2 ± 1 mm at the 3rd pass, 1.6 ± 1 mm at the 4th pass, and 1.4 ± 0.7 mm at the 5th pass. The Fowler Philip and Böhler angles consistently decreased while the X/Y ratio consistently increased following each consecutive burr pass. Interobserver reliability analysis demonstrated good agreement for all parameters. CONCLUSION: The results revealed the trends of length and anatomical changes in the calcaneus with each burr pass. On average, a dorsal wedge resection of 10 mm was achieved after 5 burr passes. This data can aid surgeons in determining the optimal number of burr passes required for a particular amount of resection, ensuring the attainment of the desired patient-specific surgical outcome.