Nonlinear MPPT techniques to control hybrid power systems.

In recent years, grid-connected multifunctional photovoltaic (PV) systems have proven to be highly efficient. This system integrates PV panels with a DC-DC boost converter (DC-DC-BC) and the electrical distribution grid (DEG). Linking the PV to the AC-DEG is accomplished through a three-level multifunctional voltage source inverter (MVSI). The DC-DC-BC component in this study is engineered to perform maximum power point tracking (MPPT) irrespective of normal or abnormal conditions. The conventional MPPT technique poses several challenges and constraints on system usage. Hence, the suggestion is to adopt synergetic control (SC) and sliding mode control (SMC) to enhance the MPPT technique's performance within the proposed system framework. Moreover, predictive direct power control is applied to the MVSI-based shunt active power filter, utilizing a phase-locked loop technique to achieve multiple objectives: minimizing energy fluctuations, injecting active power, correcting power factors, compensating reactive power, and mitigating harmonic currents. To implement the proposed system, the MATLAB is used for this purpose, with several tests used to study the behavior of the controls proposed in this work. Numerical results indicate significant reductions in active and reactive power fluctuations, with estimated rates of 38.46% and 15.30%, respectively, compared to traditional strategies. Moreover, the total harmonic distortion (THD) of the source current after filtering is reduced by 31.88% under solar irradiation of G = 1000 Wm2. Before filtering, the THD of current experiences a reduction estimated at 97.65%. These findings underscore the superior performance of the proposed control technique across all evaluated aspects.

Power regulation of variable speed multi rotor wind systems using fuzzy cascaded control.

Power quality is a crucial determinant for integrating wind energy into the electrical grid. This integration necessitates compliance with certain standards and levels. This study presents cascadedfuzzy power control (CFPC) for a variable-speed multi-rotor wind turbine (MRWT) system. Fuzzy logic is a type of smart control system already recognized for its robustness, making it highly suited and reliable for generating electrical energy from the wind. Therefore, the CFPC technique is proposed in this work to control the doubly-fed induction generator (DFIG)-based MRWT system. This proposed strategy is applied to the rotor side converter of a DFIG to improve the current/power quality. The proposed control has the advantage of being model-independent, as it relies on empirical knowledge rather than the specific characteristics of the DFIG or turbine. Moreover, the proposed control system is characterized by its simplicity, high performance, robustness, and ease of application. The implementation of CFPC management for 1.5 MW DFIG-MRWT was carried out in MATLAB environment considering a variable wind speed. The obtained results were compared with the direct power control (DPC) technique based on proportional-integral (PI) controllers (DPC-PI), highlighting that the CFPC technique reduced total harmonic distortion by high ratios in the three tests performed (25%, 30.18%, and 47.22%). The proposed CFPC technique reduced the response time of reactive power in all tests by ratios estimated at 83.76%, 65.02%, and 91.42% compared to the DPC-PI strategy. Also, the active power ripples were reduced by satisfactory proportions (37.50%, 32.20%, and 38.46%) compared to the DPC-PI strategy. The steady-state error value of reactive power in the tests was low when using the CFPC technique by 86.60%, 57.33%, and 72.26%, which indicates the effectiveness and efficiency of the proposed CFPC technique in improving the characteristics of the system. Thus this control can be relied upon in the future.

Dynamic performance of rotor-side nonlinear control technique for doubly-fed multi-rotor wind energy based on improved super-twisting algorithms under variable wind speed.

The paper proposes a nonlinear controller called dual super-twisting sliding mode command (DSTSMC) for controlling and regulating the rotor side converter (RSC) of multi-rotor wind power systems that use doubly-fed induction generators. It was proposed that this controller be developed as an alternative to the direct power control (DPC), which makes use of a pulse width modulation (PWM) strategy to regulate the RSC's functioning. Overcoming the power/current quality issue with the proposed technique (DPC-DSTSMC-PWM) is characterized by great robustness and excellent performance. The designed strategy was contrasted with the standard method of control and other methods already in use. So, the unique proposed control strategy's robustness, performance, efficiency, and efficacy in enhancing system characteristics were tested and validated in Matlab/Simulink. In both tests, the proposed method resulted in significant improvements, reducing active power ripples by 83.33%, 57.14%, and 48.57% in the proposed tests. When compared with the traditional regulation method, the reduction rates of reactive power ripples are 64.06%, 52.47%, and 68.7% in the tests. However, in contrast to the conventional method, the proposed tests showed a decrease of between 72.46%, 50%, and 76.22% in the value of total harmonic distortion (THD) of the provided currents. These ratios show how effective the proposed plan is in ameliorating and enhancing aspects of the energy system.

Self-filtering based on the fault ride-through technique using a robust model predictive control for wind turbine rotor current.

This paper studies the possibility of connecting Wind Farms (WF) to the electric grid with the use of finite space model predictive command (FS-MPC) to manage wind farms to improve the quality of the current output from the doubly-fed induction generator (DFIG) with considering fault ride-through technique. This proposed system can generate active power and enhance the power factor. Furthermore, the reduction of harmonics resulting from the connection of non-linear loads to the electrical grid is achieved through the self-active filtering mechanism in DFIGs-WF, facilitated by the now algorithm proposed. FS-MPC technique has the ability to improve system characteristics and greatly reduce active power ripples. Therefore, MATLAB software is used to implement and verify the safety, performance, and effectiveness of this designed technique compared to the conventional strategy. The results obtained demonstrated the effectiveness of the proposed algorithm in handling the four operational modes (Maximum power point tracking, Delta, Fault, and Filtering). Additionally, the suggested technique exhibited flexibility, robustness, high accuracy, and fast dynamic response when compared to conventional strategies and some recently published scientific works. On the other hand, the THD value of the current was significantly reduced, obtaining at one test time the values 56.87% and 0.32% before and after filtering, respectively 27.50% and 0.26% at another time of testing, resulting in an estimated THD reduction percentage of 99.43% and 99.05%, respectively. These high percentages prove that the quality of the stream is excellent after applying the proposed strategy.

Application of fractional-order synergetic-proportional integral controller based on PSO algorithm to improve the output power of the wind turbine power system.

It is noted that the traditional direct filed-oriented control (DFOC) is widely used in the field of electric power generation from wind due to its fast response dynamic, ease of implementation and simplicity, but this strategy is characterized by the presence of large ripples at the level of both active and reactive powers. This work presents a new algorithm for DFOC strategy of an asynchronous generator (AG) in a wind power (WP) system, which is based on the use of a new nonlinear controller called fractional-order synergetic control-fractional-order proportional-integral (FOSC-FOPI) controller, where the proposed technique parameters are calculated using the particle swarm optimization (PSO) strategy. It has been observed that the DFOC-FOSC-FOPI-PSO strategy is robust and works well in case of changing generator parameters. Three tests were performed to study the behavior of the designed technique under different working conditions, where the behavior of the DFOC-FOSC-FOPI-PSO strategy was compared with the behavior of the traditional DFOC technique in terms of power ripple ratio, overshoot, steady-state error, response time, tracking reference, and current quality. The simulation of the designed technique based on the FOSC-FOPI-PSO strategy of the AG-WP system is carried out using Matlab software, where the simulation results showed that the suggested technique is better than the classical technique (with PI controller) in terms of improving response time of active power (33.33%) and reactive power (10%) in second test, reduction of the steady-state error of reactive power (96.95%) and active power (97.14) in first test, minimization of harmonic distortion of current (96.57%) in third test and significant minimization of ripples of active power (99.67%, 44.69%, and 98.95%) and reactive power (99.25%, 53.65%, and 70.50%) in the three tests. The effectiveness of the DFOC-FOSC-FOPI-PSO strategy is very high, so it can be a reliable solution for controlling various generators.

Synergetic-PI controller based on genetic algorithm for DPC-PWM strategy of a multi-rotor wind power system.

This work designs a powerful new nonlinear control technique using synergetic control (SC), proportional-integral (PI) controller, and genetic algorithm (GA) for multi-rotor wind energy (MRWE) conversion systems, whereby an asynchronous generator (AG) is used to achieve optimal energy extraction. The direct power control (DPC) technique is used based on the proposed SC-PI-GA (SPI-GA) technique to control the AG-based MRWE system, where this new nonlinear control technique is used to achieve stable control characteristics under random changes in wind speed and to provide great robustness against modeling uncertainties. Moreover, the pulse width modulation (PWM) technique is used to control the AG inverter due to its simplicity and ease of implementation. In this proposed DPC-SPI-GA technique, we need to measure current and voltage to estimate the active power and the reactive power. Also, inner loops are not used in this proposed DPC-SPI-GA technique as is the case in the field-oriented control (FOC) technique, where the proposed system in this work is characterized by an integrated structure. Three different tests are proposed to study and verify the behavior of the designed DPC-SPI-GA strategy compared to the traditional DPC technique.