RESUMEN
Purpose: To evaluate, in vitro, the efficiency of a novel apparatus to test the adherence and penetration of bacteria on different membranes for guided regeneration. Methodology: To create the 3D device, Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) systems were used. Three types of biomaterials were tested (n = 6): (DT) a collagen membrane; (DS) a polymer membrane; and (LP) a dense polytetrafluoroethylene barrier. The biomaterials were adapted to the apparatuses and challenged with two different monospecies bacterial culture of A. actinomycetemcomitans b and S. mutans. After 2 h, bacterial adherence and penetration were quantified by counting the number of colony-forming units (CFUs). Two specimens from each group were used for image analysis using Confocal Laser Scanning Microscopy. Statistical analysis was performed. Findings: The DS group had a higher adherence of S. mutans compared to A. actinomycetemcomitans b (p = 0.05). There was less adherence of A. actinomycetemcomitans b in the DS group, compared to the LP (p = 0.011) and DT (p < 0.001) groups. Only the membranes allowed penetration, which was blocked by barriers. The DT group allowed a greater penetration of S. mutans to occur compared to A. actinomycetemcomitans b (p = 0.009), which showed a higher penetration into the DS membranes compared to S. mutans (p = 0.016). The penetration of A. actinomycetemcomitans b through DS was higher compared to its penetration through DT and LP (p < 0.01 for both). DT and DS allowed a greater penetration of S. mutans to occur compared to LP, which prevented both bacterial species from penetrating. Conclusion: The apparatus allowed for the settlement and complete sealing of the biomaterials, enabling standardization.
RESUMEN
OBJECTIVES: The aim of this study was to evaluate esthetic parameters in the anterior maxillary region by comparing single-piece zirconia versus titanium narrow-diameter implants. Additionally, clinical, radiological and patient-reported outcome measures (PROMs) were analyzed. MATERIALS AND METHODS: Thirty implants (tissue level implant) were placed in 30 patients in the maxillary esthetic sector. Depending on randomization, a zirconia (test) or titanium implant (control) was placed. Esthetic, clinical, and radiological parameters, including the implant crown esthetic index (ICAI), pink esthetic score (PES), probing pocket depth, bleeding on probing, plaque index, and marginal bone levels, were evaluated at 12, 36 and 60 months after loading. RESULTS: Sixty months after crown placement, no significant differences were found between groups. The ICAI values were 5.25 ± 4.21 and 4.50 ± 2.98 for the test and control groups, respectively. The corresponding PES values were 7.44 ± 1.93 and 7.43 ± 1.74 for the test and control groups, respectively. There were no significant intergroup differences for the rest of the parameters evaluated. CONCLUSION: It can be suggested that monotype zirconia implants may serve as a potential alternative to titanium implants in selected clinical scenarios. While the results demonstrated comparable esthetic, clinical, and radiological aspects for zirconia implants as compared to titanium implants after a 5-year follow-up period, further research with larger sample sizes and longer-term follow-up is recommended.
RESUMEN
This study evaluated the clinical survival rates of 170 Morse taper implants through clinical and mechanical parameters in different therapeutic approaches such as single crowns, fixed partial prostheses, and fixed full-arch prostheses. Patients referred to the Center on Education and Research on Dental Implants from May 2017 to July 2018 with the indication for dental implant therapy, aged >18 years, without periodontal disease, recent evidence of inflammatory activity or other oral disorders, current pregnancy, uncontrolled diabetes mellitus or heavy smoking habit were included in this study. After 12 weeks of healing since the implants were placed in the mandible and after 16 weeks following implants placed in the maxilla, patients returned to the Center for prosthetic rehabilitation. After implant therapy, all patients underwent periodical, clinical, and prosthetic examinations every 6 months. Prosthetic restorations involved 109 fixed reconstructions in function. Few prosthetic complications were reported (6.55%). Twenty implants were rehabilitated with cemented prostheses; from those, 1 crown suffered a loss in retention/decementation. Of the 148 implants rehabilitated with screwed-retained prostheses, 6.76% suffered prosthetic screw loosening. The cumulative implant survival rate was 98.2%. When peri-implant tissue health was evaluated, the keratinized mucosa band appeared related to peri-implant tissue stability. Thus, Morse taper implants represented a successful procedure for implant rehabilitation, with a high cumulative implant survival rate, low prevalence of biological and prosthetic complications, and good stability of peri-implant tissues over the assessed period.
Asunto(s)
Implantes Dentales , Humanos , Estudios de Seguimiento , Femenino , Persona de Mediana Edad , Masculino , Adulto , Prótesis Dental de Soporte Implantado , Diseño de Prótesis Dental , Fracaso de la Restauración Dental , Anciano , Implantación Dental Endoósea , CoronasRESUMEN
PURPOSE: Mucogingival defects (MGDs), such as dental root recessions, decreased vestibular depth, and absence of keratinized tissues, are commonly seen in dental clinics. MGDs may result in functional, aesthetic, and hygienic concerns. In these situations, autogenous soft tissue grafts are considered the gold-standard treatment. This study compares the healing process of free gingival grafts (FGGs) to bacterial cellulose matrix (BCM) and human acellular dermal matrix (ADM) seeded with fibroblasts from culture supplemented with platelet-rich plasma in a rat model. METHODS: Surgical defects were made in rats, which received the following treatments in a randomized manner: group I, negative control (defect creation only); group II, positive control (FGG); group III, BCM; group IV, BCM + fibroblasts; group V, ADM; and group VI, ADM + fibroblasts. Clinical, histological, and immunological analyses were performed 15 days after grafting. Clinical examinations recorded epithelium regularity and the presence of ulcers, erythema, and/or edema. RESULTS: The histological analysis revealed the degree of reepithelization, width, regularity, and presence of keratin. The Fisher exact statistical test was applied to the results (P<0.05). No groups showed ulcers except for group I. All groups had regular epithelium without erythema and without edema. Histologically, all groups exhibited regular epithelium with keratinization, and myofibroblasts were present in the connective tissue. The groups that received engineered grafts showed similar clinical and histological results to the FGG group. CONCLUSIONS: Within the limitations of this study, it was concluded that BCM and ADM can be used as cell scaffolds, with ADM yielding the best results. This study supports the use of this technical protocol in humans.
RESUMEN
AIM: The present systematic review aimed to identify and summarize the clinical, radiographic, and histological outcomes of alveolar ridge preservation using bone xenografts and absorbable sealing materials compared with spontaneous healing in the esthetic zone. MATERIALS AND METHODS: Randomized clinical trials (RCTs) fulfilling specific eligibility criteria were included. Two review authors independently searched for eligible studies, extracted data from the published reports and performed the risk of bias assessment (RoB 2 tool). Study results were summarized using random effects meta-analyses. RESULTS: Thirteen articles concerning 10 RCTs were included, involving a total of 357 participants. Most of studies were considered as "low" risk of bias. Meta-analyses indicated less horizontal (difference in means-MD = 1.88 mm; p < 0.001), vertical mid-buccal (MD = 1.84 mm; p < 0.001) and vertical mid-lingual (MD = 2.27 mm; p < 0.001) bone resorption in alveolar ridge preservation compared to spontaneous healing as assessed clinically. Bone changes assessed radiographically showed consistent results in terms of horizontal (at 1 mm: MD = 1.84 mm, p < 0.001), vertical mid-buccal (MD = 0.95 mm; p < 0.001) and mid-lingual (MD = 0.62 mm; p = 0.05) resorption. Part of the bone resorption in the spontaneous healing group was compensated by soft-tissues, since the observed differences between groups in linear ridge reduction evaluated through cast models superimposition were smaller (MD = 0.52 mm; p < 0.001). CONCLUSIONS: Alveolar ridge preservation with xenogeneic bone substitutes and non-autogenous resorbable socket sealing materials is efficacious in reducing post-extraction bone and ridge changes in the esthetic region.
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Humanos , Proceso Alveolar/cirugía , Alveolo Dental/cirugía , Aumento de la Cresta Alveolar/métodos , Pérdida de Hueso Alveolar/prevención & control , Pérdida de Hueso Alveolar/cirugía , Xenoinjertos , Remisión Espontánea , Extracción Dental/métodos , Estética DentalRESUMEN
BACKGROUND: Peri-implant disease prevalence is associated with a multifactorial etiology and distinct clinical characteristics of inflammation. METHODS: The present study aimed to assess the prevalence of peri-implant diseases, identify related risk indicators, and associate specific clinical characteristics to peri-implant biological complications in the medium term. Peri-implant diseases were classified according to established case criteria. Patients' data, implant and/or prosthetic features, and maintenance records were collected. Clinical characteristics such as bleeding on probing (BOP), suppuration (SUPP), keratinized mucosa (KM), probing depth (PD), marginal recession (MR), and modified plaque index (mPI) were recorded. RESULTS: Ninety-nine patients with 266 implants with a mean functional duration of 30.26 months were evaluated. Peri-implant mucositis and peri-implantitis prevalence totaled to 49.5% and 15.15% (patient level), respectively. Peri-implant mucositis was associated with osteoporosis (odds ratio [OR] 6.09), age (OR 0.97), diabetes mellitus (OR 3.09), cemented-retained prosthesis (OR 3.81), and partial prosthesis (OR 2.21). Peri-implantitis was associated with osteoporosis (OR 7.74) and periodontitis (OR 2.74), cemented prosthesis (OR 10.12), partial and full arch prostheses (OR 12.35 and 19.86), implant diameter (OR 3.64), abutment transmucosal height (OR 3.39), and hygiene difficulty (OR 3.14). Furthermore, mPI score 3 (OR 3.27) and PD scores (OR 1.64) were associated with peri-implant mucositis, while mPI score 3 (OR 16.42), KM (OR 1.53), PD (OR 1.81), MR (OR 2.61), and the relationship between KM and PD (OR 0.63) were associated with peri-implantitis. CONCLUSION: In the medium term, peri-implant diseases were correlated with factors inherent to the patient's conditions, presurgical treatment plan, and hygiene maintenance care. The knowledge of the mentioned factors and featured clinical characteristics can be crucial for disease prevention and establishment of a superior implant therapy prognosis.
RESUMEN
AIM: This bibliometric study analyzed the characteristics of the 100 most cited articles on bone grafts in dentistry. MATERIALS AND METHODS: A database search was performed on the Web of Science Core Collection using a specific search strategy. Scopus and Google Scholar were also consulted for citation comparisons. Data extracted included: title, citation metrics, publication year, journal, study design, graft material, surgical technique, authors, institution, and country. Bibliometric networks were generated using VOSviewer. RESULTS: The identified articles were published between 1991 and 2019. Citation counts ranged from 120 to 1161 (mean: 240, 30). Clinical Oral Implants Research was the most cited journal (5175 citations; 25/100). Xenogeneic bone graft material was the most frequently used (5130 citations; 22/100). Europe had 62 articles (14,604 citations), and the United States was the most prominent country (5209 citations; 22/100). The University of Bern had the highest number of citations (2565 citations; 13/100), with Buser D as the author with the largest number of articles (2648 citations; 12/100). CONCLUSION: This study shows the scientific progress on bone grafts in dentistry. The use of xenogeneic grafts for horizontal and/or vertical ridge augmentation was the most prominent trend.
Asunto(s)
Bibliometría , Trasplante Óseo , Estados Unidos , OdontologíaRESUMEN
The current literature on guided bone regeneration (GBR) and guided tissue regeneration (GTR) membrane contamination reports that the physicochemical characteristics of these biomaterials might influence affinity to bacteria, which appears to be a major drawback for the clinical outcome of the regenerative procedures. Thus, this study aimed to evaluate, in vitro, a multispecies biofilm adherence and passage of bacteria through different types of commercially available membranes for GTR/GBR. Four types of membranes were tested (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; and LP) Lumina PTFE®. Aluminum foil (AL) simulated an impermeable barrier and was used as the control. The membranes were adapted to specific apparatus and challenged with a mixed bacterial culture composed of A. actinomycetemcomitans b, S. mutans, S. mitis, and A. israelii. After 2 h or 7 days, bacterial adhesion and passage of bacteria were evaluated through CFU counting, which was analyzed by two-way ANOVA e post hoc Tukey, at a 5% significance level. Representative areas of two membranes of each group were analyzed through scanning electron microscopy (SEM) to assess the morphology and organization of the biofilm over the membrane fibers. LC and LP presented similar values of adhered bacterial cells (p > 0.05), significantly inferior when compared to the other groups, in both time points (p < 0.05). All the tested groups were permeable to bacterial cells, with no significant difference between the trial period of 2 h and 7 days (p > 0.05). SEM analyses demonstrated that adhered bacteria number increased throughout the time points (2 h < 7 days). Commercially available biological membranes demonstrated intense bacterial adherence and passage of bacteria, which increased throughout the trial period.
Asunto(s)
Regeneración Tisular Dirigida , Bacterias , Adhesión Bacteriana , Materiales Biocompatibles , Biopelículas , Membranas Artificiales , Regeneración Tisular Guiada Periodontal/métodosRESUMEN
Abstract The current literature on guided bone regeneration (GBR) and guided tissue regeneration (GTR) membrane contamination reports that the physicochemical characteristics of these biomaterials might influence affinity to bacteria, which appears to be a major drawback for the clinical outcome of the regenerative procedures. Thus, this study aimed to evaluate, in vitro, a multispecies biofilm adherence and passage of bacteria through different types of commercially available membranes for GTR/GBR. Four types of membranes were tested (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; and LP) Lumina PTFE®. Aluminum foil (AL) simulated an impermeable barrier and was used as the control. The membranes were adapted to specific apparatus and challenged with a mixed bacterial culture composed of A. actinomycetemcomitans b, S. mutans, S. mitis, and A. israelii. After 2 h or 7 days, bacterial adhesion and passage of bacteria were evaluated through CFU counting, which was analyzed by two-way ANOVA e post hoc Tukey, at a 5% significance level. Representative areas of two membranes of each group were analyzed through scanning electron microscopy (SEM) to assess the morphology and organization of the biofilm over the membrane fibers. LC and LP presented similar values of adhered bacterial cells (p > 0.05), significantly inferior when compared to the other groups, in both time points (p < 0.05). All the tested groups were permeable to bacterial cells, with no significant difference between the trial period of 2 h and 7 days (p > 0.05). SEM analyses demonstrated that adhered bacteria number increased throughout the time points (2 h < 7 days). Commercially available biological membranes demonstrated intense bacterial adherence and passage of bacteria, which increased throughout the trial period.
Resumo O objetivo deste estudo foi avaliar, in vitro, a aderência do biofilme multiespécie e a passagem de bactérias através dos diferentes tipos de membranas disponíveis comercialmente para RTG/ROG. Quatro tipos de membranas foram testados (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; e LP) Lumina PTFE®. Papel alumínio (AL) simulou uma barreira impermeável e foi usado como controle negativo. As membranas foram adaptadas à um aparato específico e desafiadas com uma cultura bacteriana mista composta de A. actinomycetemcomitans b, S. mutans, S. mitis, e A. israelii. Após 2 h ou 7 dias, a aderência e passagem bacteriana foi avaliada através da contagem de UFCs. Duas membranas de cada grupo foram analisadas através da microscopia eletrônica de varredura (MEV). LC e LP apresentaram valores semelhantes de células bacterianas aderidas (p < 0.05), significativamente inferiores quando comparados aos outros grupos, em ambos os períodos experimentais (p < 0.05). Desde a análise inicial, todos os grupos testados foram permeáveis às células bacterianas, sem diferença significativa entre o período experimental de 2 h e 7 dias (p > 0.05). As análises em MEV demonstraram que o número de bactérias aderidas aumentou com o tempo (2 h < 7 days). Membranas biológicas comercialmente disponíveis demonstraram intensa aderência bacteriana e passagem de bactérias, que aumentou durante os períodos experimentais.
RESUMEN
This study aimed to describe the step-by-step procedure of the polydioxanone dome technique associated with guided bone regeneration (GBR) and to report the results up to 72 months after implant loading. Patients with maxillary horizontal bone defects (< 5 mm residual width, confirmed by CBCT scan) were treated with the proposed intervention. During the GBR procedure, four bone perforations were strategically prepared in a roughly square configuration. Segments of polydioxanone suture material were introduced in the perforations, forming a dome-shaped structure. Six months after bone augmentation, a new CBCT was performed. After implant restoration, periapical radiographs were taken, which were then repeated annually. The following outcomes were analyzed: implant survival, horizontal bone gain, marginal bone level, and complications. Twenty implants were placed in 11 patients with a survival rate of 100% in a mean follow-up of 38.18 ± 19.65 months after loading. Mean horizontal bone gain was 3.82 ± 1.67 mm and mean marginal bone level was -0.12 ± 1.17 mm. Only minor complications were observed. The present results suggest that the polydioxanone dome technique may represent a promising approach during horizontal GBR, alone or in combination with implant placement. Int J Periodontics Restorative Dent 2023;43:223-230. doi: 10.11607/prd.6087.
Asunto(s)
Aumento de la Cresta Alveolar , Implantes Dentales , Humanos , Implantación Dental Endoósea/métodos , Estudios de Seguimiento , Polidioxanona , Resultado del Tratamiento , Regeneración Ósea , Regeneración Tisular Guiada Periodontal , Aumento de la Cresta Alveolar/métodosRESUMEN
This study assessed the histologic and histomorphometric changes of free gingival grafts in a canine model after mechanical expansion. A total of eight epithelialized tissue samples were obtained from the palate of eight Beagle dogs. Samples were cut in half and separated into two groups: the test group, in which a device was used to expand the grafts, and the control group, without expansion. After histologic processing, samples were evaluated by qualitative histology and histomorphometry. Histologic analysis revealed some differences in epithelial cell morphology and keratin layer integrity in the test group compared to the control group. Differences in histomorphometric parameters for the expanded and nonexpanded groups, including the thickness of the keratin layer (15.4 ± 13.4 µm and 32.3 ± 18.1 µm, respectively), thickness of the epithelium (398.0 ± 168.0 µm and 368.4 ± 142.8 µm, respectively), and the area occupied by collagen fibers in the connective tissue (62.0% ± 11.0% and 55.8% ± 7.6%, respectively), were not statistically significant (P < .05). Despite some changes in qualitative histology, free gingival grafts maintained their histomorphometric characteristics after mechanical expansion. These data provide a scientific basis for the use of mechanical expansion as a possible procedure to reduce the morbidity of autogenous grafts because a single soft tissue sample can be expanded before grafting. Int J Periodontics Restorative Dent 2023;43:e89-e97. doi: 10.11607/prd.5752.
Asunto(s)
Encía , Procedimientos Quirúrgicos Orales , Perros , Animales , Encía/cirugía , Tejido Conectivo/trasplante , Epitelio/patología , QueratinasRESUMEN
This case report presents a novel approach for root coverage of multiple gingival recessions with a volume-stable collagen matrix functionalized with injectable platelet-rich fibrin (i-PRF). A patient with multiple gingival recessions in the anterior maxilla was submitted to root coverage by coronally advanced flap with split-full-split incisions. Blood collection was performed before surgery and i-PRF was obtained after centrifugation (relative centrifugal force (RCF) 400 g, 2700 rpm, 3 minutes). A volume-stable collagen matrix was soaked with i-PRF and applied as a substitute for autogenous connective tissue graft. A mean root coverage of 83% was observed after a 12-month follow-up period, and only slight modifications were detected in a 30-month follow-up consultation. The association of a volume-stable collagen matrix with i-PRF successfully treated multiple gingival recessions with reduced morbidity since a connective tissue collection was avoided.
RESUMEN
Purpose: To compare different socket sealing approaches for alveolar ridge preservation and assess the dimensional changes and histologic characteristics of soft and hard tissues in a 4- to 6-month period. Material and Methods: A total of 22 patients with indicated single-tooth extraction in the maxillary nonmolar region were eligible for this study. After CBCT scanning and minimally traumatic tooth extraction, the alveolar sockets were filled with demineralized bovine bone mineral with collagen (DBBM-C) in patients from all groups except for those in the control group. Patients were divided into groups for socket sealing as follows: unsealed/spontaneous healing (control; n = 6), collagen matrix (n = 5), collagen membrane (n = 5), and autogenous graft (n = 6). A second CBCT scan was taken 4 to 6 months after extraction, and a trephine biopsy of soft and hard tissues was collected during implant placement. Tomographic dimensional changes were compared between groups. Intragroup tomographic evaluation and histological analysis were also performed. Results: Analysis of dimensional changes did not detect differences between the socket sealing groups (P > .05). In an intragroup evaluation, the height of the buccal bone and cross-sectional area of the alveolar ridge were significantly lower 4 to 6 months after extraction for the control group (P = .031). Histological analysis revealed that the socket sealing approach had no impact on hard and soft tissue formation. Conclusion: The data from the present study suggest that socket sealing with a collagen matrix, a collagen membrane exposed to the oral cavity, or an autogenous punch graft had no difference in the effects on volumetric maintenance and tissue formation in a period of 4 to 6 months.
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Humanos , Animales , Bovinos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Colágeno/uso terapéutico , Extracción Dental/métodos , Cicatrización de Heridas , Aumento de la Cresta Alveolar/métodos , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/prevención & control , Pérdida de Hueso Alveolar/cirugíaRESUMEN
A static magnetic field generated by neodymium-iron-boron (NdFeB) magnets placed in the inner cavity of dental implants can enhance bone regeneration in rabbits. It is, however, unknown whether static magnetic fields support osseointegration in a canine model. We therefore determined the potential osteogenic effect of implants carrying NdFeB magnets inserted in the tibia of six adult canines in the early stages of osseointegration. Here, we report that after 15 days of healing, magnetic and regular implants showed a high variation with a median new bone-to-implant contact (nBIC) in the cortical (41.3% and 7.3%) and the medullary (28.6% and 44.8%) region, respectively. Consistently, the median new bone volume/tissue volume (nBV/TV) in the cortical (14.9% and 5.4%) and the medullary (22.2% and 22.4%) region were not significantly different. One week of healing only resulted in negligible bone formation. These findings suggest that considering the large variation and the pilot nature of this study, magnetic implants failed to support peri-implant bone formation in a canine model.
RESUMEN
Objectives: The aim of the present systematic review was to evaluate the dimensional influence of the epithelialized tissue graft harvested from the palate in the postoperative pain. Material and Methods: Research was conducted in electronic databases Cochrane Library, Embase, LILACS, PubMed, Scopus, and Web of Science upwards May 15, 2022. Studies that reported the influence of graft dimensions of palatal epithelized harvesting on postoperative pain were eligible. The evaluation was made using the methodological quality assessment by Joanna Briggs Institute Critical Appraisal Checklist for randomized clinical trials and non-randomized studies and the level of evidence according to GRADE. Results: Four studies were included. The clinical and methodological heterogeneity among studies led to an analysed narrative. The postoperative pain was assessed during the period of 1 to 28 postoperative days. It was determined by using visual analog scale in three studies, while the evaluation was performed indirectly based on analgesics intake in one study. According to three studies, bigger graft sizes were associated with higher postoperative pain. The methodological quality assessment categorized two study as high (one randomized control trial and one non-randomized), and two as moderate (one randomized control trial and one non-randomized). The data was considered moderate. Conclusions: Based on the moderate certainty level, bigger graft sizes of palatal epithelized harvesting appear to promote more postoperative pain. Understanding the postoperative pain as a response to a graft extension may assist some clinical decisions regarding the surgical periodontal and peri-implant planning.
RESUMEN
AIM: The objective of this in vitro study was to evaluate the viability and morphology of human fibroblasts and keratinocytes cells, both grown on stainless steel (steel) (18Cr14Ni2.5Mo), and polyether-ether-ketone (PEEK) surfaces, hypothesizing the use of these surfaces as novel materials for prosthetic components. MATERIALS AND METHODS: Gingival human keratinocytes and gingival human fibroblasts lines were grown on discs made by steel (n = 36), PEEK (n = 36), and titanium (Ti) (Ti6A14V) (n = 36)-control. For viability assay, cultures were grown at 24 hours (TV1), 48 hours (TV2), and 72 hours (TV3) times and evaluated by the colorimetric tetrazolium assay (MTT). For morphology and cell adhesion assays, after 24 hours (TM1), 48 hours (TM2), and 96 hours (TM3) of cell culture, cells were examined by scanning electron microscopy (SEM) and analyzed at magnifications with 500×, 1,000×, and 2,500×. RESULTS: Regarding the viability, the keratinocytes did not present statistical difference on the different materials, in TV1 and TV3 times of culture. Their growth rate increased on all materials, being more expressive in steel; the fibroblasts did not present statistical difference on the different materials, in TV2 and TV3 times of culture. The growth rate of these decreased on all materials, being more expressive in PEEK. The morphology analyses show increase in cell numbers, adequate spreading, and adhesion at all cultivation times (TM1, TM2, and TM3) in both cell lines, on all materials. CONCLUSION: All materials tested are suitable for use in the manufacture of prosthetic components for implant-supported rehabilitations, considering the limitations of this study. CLINICAL SIGNIFICANCE: This work analyzes the cellular response of cells present in the human gingiva, as a way to simulate the peri-implant tissue response around novel angular prosthetic components made of stainless steel and PEEK.
Asunto(s)
Encía , Acero Inoxidable , Adhesión Celular , Humanos , Polietilenglicoles/farmacología , Propiedades de Superficie , TitanioRESUMEN
Maxillary permanent canines are the second most frequent cases of impacted teeth; their resolution demands a multidisciplinary evaluation to delineate a viable treatment plan based on the individual esthetic and functional outcomes required. An impacted maxillary permanent canine which was ankylosed in a horizontal position was extracted followed by a regeneration technique, filling the bone defect with biomaterial. An implant was immediately installed in the alveolus of the extracted deciduous canine, and a connective tissue graft was buccally positioned. After the osseointegration period, a modified Palacci and Nowzari surgical technique was performed to gain papilla, and the implant was loaded with an interim restoration with a proper profile to manipulate the soft-tissue contour. Finally, the definitive restauration was cemented achieving the desired outcomes. The achieved clinical outcomes remain stable during a 2-year follow-up. A successful management of this challenge esthetic case lies in the details at surgical and prosthetic phases based in biological response of the peri-implant tissues.
RESUMEN
This clinical report describes the replacement of a traumatized maxillary canine that was extracted after unsuccessful orthodontic extrusion with an implant-supported restoration. Guided bone regeneration surgery was performed, followed by a second surgery with implant placement plus simultaneous bone and tissue regeneration. Esthetics and function were achieved with the placement of a veneered zirconia implant-supported restoration.
Asunto(s)
Implantes Dentales , Estética Dental , Diente Canino/cirugía , Prótesis Dental de Soporte Implantado , Maxilar/cirugía , Extrusión OrtodóncicaRESUMEN
PURPOSE: To evaluate the abutment removal torque and the morphologic aspects of wear in frictional Morse taper connections after axial loading with or without biofilm immersion. MATERIALS AND METHODS: Thirty sets of Morse taper implants and prosthetic abutments were divided into six groups based on the number of mechanical loading cycles and immersion in biofilm derived from human saliva: without load, without biofilm; without load, with biofilm; 100,000 cycles of load, without biofilm; 100,000 cycles of load, with biofilm; 500,000 cycles of load, without biofilm; and 500,000 cycles of load, with biofilm. Mechanical loading was applied at a force of 80 ± 15 N with a frequency of 2 Hz for 100,000 or 500,000 cycles. After removal torque evaluation, the internal surface of the implants was evaluated by scanning electron microscopy and optical profilometer. The results were statistically analyzed at a significance level of P = .05. RESULTS: Overall, the removal torque increased for samples submitted to loading (100,000 cycles of load, without biofilm = 83.8 ± 15.8 Ncm; 100,000 cycles of load, with biofilm = 160.6 ± 16.2 Ncm; 500,000 cycles of load, without biofilm = 147.0 ± 29.3 Ncm; 500,000 cycles of load, with biofilm = 154.5 ± 14.0 Ncm) compared to samples without loading (without load, without biofilm = 23.0 ± 9.4 Ncm; without load, with biofilm = 27.2 ± 7.5 Ncm). The removal torque was not different between groups that received the same number of loading cycles and varied on biofilm exposure (P > .05). However, samples immersed in biofilm showed higher values of removal torque. Surface analysis revealed that the damage on the internal surface of implants was lower in samples not submitted to cyclic mechanical loading (P < .05) independently of immersion in biofilm medium. CONCLUSION: Cyclic mechanical load on the frictional implant-abutment connection of Morse taper implants increased the removal torque of abutments. The findings of this research suggest that the presence of biofilm can potentially increase the removal torque in frictional Morse taper connections, although more studies are recommended to support this affirmation. Oral biofilm did not interfere with the presence of wear areas along the internal surface of Morse taper implants but increased the roughness values.
Asunto(s)
Diseño de Implante Dental-Pilar , Implantes Dentales , Biopelículas , Pilares Dentales , Análisis del Estrés Dental , Humanos , Ensayo de Materiales , TorqueRESUMEN
While various zirconia-based alternatives are available today for the restoration of teeth and implants in the esthetic zone, each treatment approach could result in different optical behavior. To clinically demonstrate these differences, this case report describes a rehabilitation in the esthetic zone using several options of teeth- and implant-supported restorations. Conventional veneered zirconia crowns, high-translucent monolithic zirconia crowns, and minimally veneered high-translucent zirconia crowns were proposed and assessed under different light sources before cementation. The patient and clinical team achieved consensus on the minimally veneered high-translucent zirconia crowns, which were then cemented and have performed well over both tooth and implant substrates.