Detection of coca alkaloids in oral fluid from coca leaf (tea) consumers: using solid phase extraction to improve validation parameters and widen the detection window.

Hygrine and cuscohygrine, two coca leaf alkaloids, have been previously proposed as markers to differentiate legal and illegal cocaine consumption. This is a very common problem in some countries of South America, where the consumption of coca leaves has a long tradition. Analytical methods focusing on the assessment of coca leaf alkaloids, such as cuscohygrine, hygrine, tropacocaine and t-cinnamoylcocaine, in oral fluid are virtually non-existent in forensic toxicology laboratories worldwide due to their lack of application. However, the problem of differentiating legal and illegal cocaine use in criminal justice, DUID (drug-impaired driving) and WDT (workplace drug testing) programs is growing. Therefore, researchers are obliged to develop methods to measure coca leaf alkaloids (cuscohygrine, hygrine and t-cinnamoylcocaine) in biological matrices for further validation for routine analyses in forensic toxicology laboratories. This work aims to optimize a previously published separation method by protein precipitation in oral fluid by using solid-phase extraction (SPE) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) operating in multiple reaction monitoring (MRM) mode. The use of SPE allowed the matrix effect and the background to be reduced in the chromatograms due to the obtained cleaner extracts. Consequently, improved detection and quantification limits were reached. Findings showed that the detection windows for coca leaf alkaloids were longer than three hours in real oral fluid samples from volunteers who drank a cup of coca tea. These detection windows are quite higher than those previously obtained when using the method based on separation by protein precipitation.

Perfil de alcaloides de la hoja de coca en el fluido oral de un mascador de hoja de coca y un bebedor de té de coca: Estudio preliminar / Coca alkaloids profile in oral fluid from people chewing coca leaves and drinking coca tea: Preliminary study

Actualmente el fluido oral (FO) es aceptado como una matriz biológica alternativa para detectar drogas en toxicología clínica y forense. En países como Argentina donde el uso de hojas de coca (mascar hojas de coca o beber té de coca) es legal son necesarios procedimientos adecuados para logar una clara diferenciación entre los individuos que usan las hojas de coca de manera legal de aquéllos que usan cocaína en forma ilegal. Poca es la información que hay en la literatura sobre el perfil de los alcaloides de la hoja de coca en FO de personas que mascan hojas de coca o toman té de coca y hasta el presente trabajo no se hallaron datos sobre el perfil en FO de la higrina (HIG) y cuscohigrina (CUS). De este estudio preliminar participaron dos voluntarios. Los resultados mostraron que la CUS e HIG siguieron siendo positivas después que la cocaína (COC) y benzoilecgonina (BE) cayeron por debajo de los valores cut- off propuestos por las guías internacionales para FO en casos de screening (15 a 20 ng/ mL) y de confirmación (8 a 10 ng/mL) en el caso del mascador de coca. En el participante que tomó una taza de té de coca, en el último punto examinado (1 h) resultó ser positivo para la COC y BE y también para la CUS e HIG. El FO podría ser una muestra útil para confirmar el uso legal de la hoja de coca, aun cuando futuros estudios son necesarios para corroborar estos primeros datos.

Nowadays oral fluid (OF) is accepted as an alternative biological sample for detecting drugs in clinical and forensic toxicology. In countries like Argentina, where the use of coca leaves (coca leaves chewing and coca tea drinking) is legal, adequate procedures are required to allow a clear differentiation between people who use coca leaves (legal practice) and those who use cocaine (illicit practice). There is scarce literature regarding coca leaf alkaloids profile in OF from people who chew coca leaves and drink coca tea. Until now, coca leaf alkaloids profile of hygrine (HYG) and cuscohygrine (CUS) in OF were not described in the literature. The current preliminary study was performed with two healthy volunteers. In this research CUS and HYG have been found to be positive (detectable) even when cocaine (COC) and benzoylecgonine (BE) are dropped below the cut-off values proposed by international guidelines for screening (15 to 20 ng/mL), and confirmation (8 to 10 ng/mL) in OF. In addition, CUS and HYG were also found to be positive at the same time of the last detection of COC and BE after coca tea consumption. The OF would be a useful sample to confirm the legal use of coca leaf, even when more researches are therefore needed.

Speciation of iodine-containing proteins in Nori seaweed by gel electrophoresis laser ablation ICP-MS.

An analytical approach providing an insight into speciation of iodine in water insoluble fraction of edible seaweed (Nori) was developed. The seaweed, harvested in the Galician coast (Northwestern Spain), contained 67.7±1.3 µg g(-1) iodine of which 25% was water soluble and could be identifies as iodide. Extraction conditions of water insoluble residue using urea, NaOH, SDS and Triton X-100 were investigated. The protein pellets obtained in optimized conditions (after precipitation of urea extracts with acetone), were digested with trypsin and protease XIV. Size exclusion chromatography-ICP-MS of both enzymatic digests demonstrated the occurrence of iodoaminoacids putatively present in proteins. Intact proteins could be separated by gel electrophoresis after an additional extraction of the protein extract with phenol. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS PAGE) with laser ablation ICP-MS detection of (127)I indicated the presence of iodine in protein bands corresponding to molecular masses of 110 kDa, 40 kDa, 27 kDa, 20 kDa and 10 kDa. 2D IEF-SDS PAGE with laser ablation ICP-MS (127)I imaging allowed the detection of 5 iodine containing protein spots in the alkaline pI range.

Functionalized gold nanoparticles for the detection of arsenic in water.

Gold nanoparticles are attractive as sensing materials because of their size and shape are related with their optical properties. The color change produced by the aggregation of functionalized AuNPs allows the detection of arsenic at low levels. A simple, cheap and fast analytical procedure to perform arsenic determination using functionalized gold nanoparticles (AuNPs) and VIS spectrometry as a detection technique is studied. Three different synthesis procedures to obtain the AuNPs and two different functionalization modes were studied. AuNPs functionalized with GSH-DTT-CYs-PDCA were selected as the most adequate. The correlation between the decrease in the absorbance signal and the arsenic concentration was good in the 2-20 µg l(-1)interval. Repeatability, expressed as average of RSD (%), obtained for the different arsenic concentrations studied was 0.6%. The average value of the analytical recovery was 99.7%. The detection and quantifications limits were 2.5 and 8.4 µg l(-1) respectively. These limits are sufficient to detect World Health Organization's guideline value of 10 µg l(-1).

Comparison of two lab-made spray chambers based on MSIS™ for simultaneous metal determination using vapor generation-inductively coupled plasma optical emission spectroscopy.

The objective of this study is to evaluate the performance of two lab-made systems based on the Multimode Introduction System (MSIS™) and the modified MSIS™, to generate and introduce vapors of Ag, Cu, Cd, Cu, Ni, Sn, Zn, and also Au in the ICP torch. An univariate procedure was used to select the optimized working conditions (Ar flow, sample, reductant and waste flows, and reagent concentrations). Optimum conditions for working with modified MSIS were: nitric acid concentration 0.35 M, 8-hydroxyquinoline concentration: 40 mg L(-1), sodium borohydride concentration: 1.75% (w/v)+0.4% (w/v) NaOH, argon purge flow to sweep the vapors to the torch: 1.2 L min(-1), sample flow and sodium borohydride flows: 2.3 L min(-1); waste flow: 7.7 mL min(-1). For the optimum working conditions for lab-made MSIS in dual mode the concentration of 8-hydroxyquinoline was 225 mg L(-1), the Ar purge flow was 0.75 L min(-1), and the conventional nebulization flow was 2.3 L min(-1). The sensitivity obtained was higher using the lab-made MSIS than using the lab-made modified MSIS or a forced outlet gas-liquid separator. The limits of detection were better for Au, Cd, Sn than those obtained using conventional nebulization; the measurements were precise (RSDs≤5% in dual mode) and a good accuracy was obtained in the determination of Cd, Cu, Ni and Zn in a wastewater reference material using aqueous calibration and the lab-made MSIS in dual mode.

Preliminary findings on the antimony levels of Quiroga river water in the vicinity of a long-abandoned stibnite mine.

A UV-Vis spectrophotometric method was developed as a preliminary approach to the determination of antimony in water samples from a river that flows very close to an abandoned mining site. The analyte is complexed with ammonium pyrrolidinedithiocarbamate and absorbance of the complex is measured at 291.06 nm. The standard additions method is mandatory in view of the matrix effect observed, and the response is linear at least up to 9.3 microg/mL of antimony. The sensitivity of the method is 2.609 x 10(-2) mL/microg, whereas the limits of detection and quantification are, respectively, 0.2 and 0.6 microg/mL. The repeatability, expressed as mean relative standard deviation of the measurements within the calibration range, is 2.0%, whereas the repeatability of the entire procedure is 0.3%. The mean analytical recovery within the calibration range was 102.6%. The method was successfully applied to river water samples.

Direct LC-ES-MS/MS determination of phthalates in physiological saline solutions.

A method for determining a group of phthalic esters (PAEs) in physiological saline solutions has been developed. The PAEs studied were dimethyl phthalate, diethyl phthalate, butyl benzyl phthalate and dibutyl phthalate. These groups of phthalates were determined by liquid chromatography-electrospray ionization-tandem mass spectrometry, working in positive ion mode. The compounds were separated by liquid chromatography working in gradient mode with acetonitrile-ultrapure water as a mobile phase. The separation was performed starting with 5% of acetonitrile and increasing to 75% in 5 min, followed by isocratic elution for 8 min. The method was precise (with relative standard deviation (RSD) from 1.0 to 6.8%) and sensitive, with LODs of 0.05, 0.38, 0.05 and 0.82 µg L⁻¹ for DMP, DEP, BBP and DBP, respectively. The proposed analytical method has been applied to determine these compounds in different physiological saline solutions commercialized in plastic bottles.

Phthalates determination in physiological saline solutions by HPLC-ES-MS.

Phthalates are a group of chemical compounds with increasing interest from the analytical point of view. The risks for human health associated with some of these compounds have unleashed the necessity to develop analytical methods with great sensitivity that allow us to detect their presence at trace levels in order to assure protection for the population. A simple and rapid method for determining a group of phthalate esters in aqueous samples was developed. The method was based on high-performance liquid chromatography-(electrospray)-mass spectrometry (HPLC-ES-MS), working in positive ionisation (PI) mode. A gradient elution was performed with acetonitrile-ultrapure water starting from 5 to 75% acetonitrile in 5 min followed by isocratic elution during 5 min. Standard calibration curves were linear for all the analytes over the concentration range 10-500 ng mL(-1). The LOD values found for DMP, DEP, BBP and DBP were 0.8, 3.4, 0.6 and 1.2 ng mL(-1) respectively. The relative standard deviation ranged from 0.8 to 1.7%, which indicated good method precision. The proposed analytical method has been applied to the analysis of commercial physiological saline solutions in order to check the presence of phthalates and to determine their concentration.

Chromium available fractions in arousa sediments using a modified microwave BCR protocol based on microwave assisted extraction.

In a research of chromium availability, the three-stage sequential extraction procedure, proposed by European Community Bureau of Reference (BCR), has been applied for the metal fractionation in marine sediment samples. The procedure has been modified, evaluating the effect of microwave energy to perform the sequential method. Results achieved a substantial reduction in time in comparison to the traditional shaking technique. The time of the first and the second extractions were reduced to 30s in both steps using microwave heating and working at 66W of power. To the third extraction, higher power was necessary so it was chosen to work at 198W. In the last step investigated, time was reduced to 1min, being a great improvement respect to the conventional BCR sequential extraction protocol. Chromium determinations in these extracts were carried out by Electrothermal Atomic Absorption Spectrometry (ETAAS). The developed method was applied for chromium determination in marine sediment samples from Ria de Arousa (Galicia, NW of Spain). The values obtained by our laboratory ranged from 0.10 to 1.02mugg(-1) for soluble and reducible fractions, and from 5.5 to 60.0mugg(-1) for the oxidisable fraction. The higher concentrations obtained were the chromium associated with the organic fraction of the marine sediments.

Silicon determination in milk by electrothermal atomic absorption spectrometry using palladium as chemical modifier.

A direct method for silicon determination in milk samples by Electrothermal Atomic Absorption Spectrometry was developed. Palladium was used as chemical modifier at a concentration of 610 mg L(-1); with this modifier, silicon was stable up to 1800 degrees C. The precision and accuracy of the method were investigated. The detection limit was 16.2, 2.7 and 7.2 micro g L(-1) for cows' milk, human milk and infant formula, respectively. The method was applied to silicon determination in 17 infant formula samples, 13 human milk samples and 12 cows' milk samples.

Selective preconcentration and determination of tributyltin in fresh water by electrothermal atomic absorption spectrometry.

A rapid and simple method for separation and determination of tributyltin (TBT) in mineral and tap water is described. The procedure is based on the selective retention of TBT by a chelating resin, Amberlite XAD-2 impregnated with tropolone. The addition of 0.8% sulfuric acid to the water sample leads to the retention of TBT by the resin while monobutyltin (MBT), dibutyltin (DBT) and inorganic tin remain in solution. TBT is eluted with methyl isobutyl ketone (MIBK) obtaining a preconcentration factor of 80. Tin concentration is determined by ETAAS using zirconium coated tubes. Multi-injection and hot injection techniques are used in order to enhance the sensitivity of the method. A detection limit of 14.4 ng L(-1) is achieved with recoveries near to 100%. The procedure has been successfully applied to TBT determination in various fresh water samples.

Separation of gallium and indium from ores matrix by sorption on Amberlite XAD-2 coated with PAN.

A chelating sorbent obtained by adsorption of 1-(2-pyridylazo)-2-naphthol (PAN) on Amberlite XAD-2 was used for the preconcentration of Ga and In. The analytical characteristics of the chelating sorbent were investigated and optimun sorption conditions for these metals under dynamic conditions were established. A peristaltic pump is used to adjust the flow rate of the solution. Elements are collected from the column by using a mixture adjusted to a pH range of 4-7 and 6-12 by ammonia or ammonium chloride for Ga and In, respectively. The procedure developed was applied to the analysis of different ores.

Experimental designs in the optimisation of ultrasonic bath-acid-leaching procedures for the determination of trace elements in human hair samples by atomic absorption spectrometry.

Experimental designs were used for the optimisation of acid-leaching procedures assisted by ultrasonic energy for the extraction of Ca, Cu, Fe, Mg, Mn and Zn from human hair samples. A Plackett-Burman 2(7) x 3/32 design for seven factors ([HNO3], [HCl], [H2O2], acid/oxidant solution volume, exposure time to ultrasounds, temperature of the ultrasonic bath and hair particle size) was used in order to choose the variables affecting the acid-leaching process. The variables [HNO3], [HCl] and temperature of the ultrasonic bath were found to be the most important parameters for the acid-leaching procedure, and these variables were optimised by a response surface design (central composite design 2(3) + star) which involved 16 experiments. Optimum values in the 3.7-4.2 M range were found for [HNO3], while optimum values between 3.0 and 3.5 M were found for [HCl]. The optimum temperature of the ultrasonic bath was between 80 and 90 degrees C. An acid digestion induced by microwave energy (details given) was used to obtain the total metal concentration and also for comparative purposes. Ca, Cu, Fe, Mg and Zn were measured by flame atomic absorption spectrometry (FAAS) using a conventional air/acetylene flame, while Mn was determined by electrothermal atomic absorption spectrometry (ETAAS) under optimised conditions. Two different reference materials, IAEA-085 International Atomic Energy Agency, Monaco) and NIES No. 13 (National Institute for Environmental Studies, Japan), with certified metal contents for some of the elements investigated, were used in order to verify the accuracy of the methods.

Selenium determination in mother and child's hair by electrothermal atomic absorption spectrometry.

A method for the selenium determination in a mother and her child's hair using palladium as a chemical modifier was optimized. The sample was digested with nitric acid and hydrogen peroxide and diluted to 5 ml. To achieve complete mineralization the samples were ashed at 1200 degrees C in the presence of palladium as a chemical modifier. The optimum atomization temperature was 1900 degrees C. The precision and accuracy of the method were studied using the reference material CRM 397. Results of calibration using aqueous standards and the standard addition method were compared. The method was applied to the selenium determination in 30 samples of the mother's and child's hair. The levels found were 0.54 +/- 0.34 microgram/g for mother's hair and 0.77 +/- 0.25 microgram/g for child's hair.

A study of illicit cocaine seizure classification by pattern recognition techniques applied to metal data.

Fifteen metallic species, silver (Ag), aluminum (Al), calcium (Ca), cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), nickel (Ni), lead (Pb), strontium (Sr) and zinc (Zn), were determined in 46 cocaine samples confiscated by the Spanish police in Galicia (northwest Spain). Classification of these cocaine samples according to their geographic origin (Colombia and Venezuela) was achieved by the application of pattern recognition techniques to the metallic content data. Cocaine samples, around 0.5 g, were directly dissolved in 2 mL of 35.0% (v/v) HNO3, diluted to 10 mL with ultrapure water. The metals were quantified by means of electrothermal atomic absorption spectrometry (Ag, Al, Cd, Cr, Cu, Mn, Ni, Pb and Sr), flame atomic absorption spectrometry (Ca, Fe, Mg and Zn), and flame atomic emission spectrometry (K and Na). Results show that two geographic origins can be established through the presence of trace and major elements.

Direct electrothermal atomic absorption spectrometry determination of nickel in sea water using multiple hot injection and Zeeman correction.

Methods for the direct determination of Ni in sea water samples by ETAAS were developed using Zeeman effect background correction system (ZEBC) and a multi-injection technique. A mass of palladium nitrate of 2.5 mug (for an injection volume of 100 mul) was used as chemical modifier. The optimum pyrolysis and atomization temperatures were 1700 and 2100 degrees C, respectively. The characteristic mass (m(0)) and characteristic concentration (C(0)), precision and accuracy were studied for different injection volumes (20, 100 and 200 mul). For an injection volume of 100 mul (five 20 mul aliquot) of sample the accuracy analysis of different certified materials (saline and non saline water) was agreeable. The total time of the proposed procedure is 6 min. A m(0) and C(0) of 34.5 pg and 0.3 mug l(-1), respectively were obtained for this injection volume (100 mul). Finally, interferences from major and minor components of sea water was studied.

Determination of aluminium and manganese in human scalp hair by electrothermal atomic absorption spectrometry using slurry sampling.

Methods for the determination of aluminium and manganese in human scalp hair samples by electrothermal atomic absorption spectrometry using the slurry sampling technique were developed. Palladium and magnesium nitrate were used as chemical modifiers. Hair samples were pulverized using a zirconia vibrational mill ball, and were prepared as aqueous slurries. Determinations can be performed in the linear ranges of 1.9-150 mug l(-1) Al(3+) and 0.03-10.0 mug l(-1) Mn(2+). Limits of detection of 0.9 mg kg(-1) and 27.6 mug kg(-1) were obtained for aluminium and manganese, respectively. The analytical recoveries were between 99.6 and 101.8% for aluminium and in the 98.3-101.3% range for manganese. The repeatability of the methods (n=11), slurry preparation procedure and ETAAS measurement, was 16.0 and 7.9% for aluminium and manganese, respectively. The methods were finally applied to the aluminium and manganese determination in 25 scalp hair samples from healthy adults. The levels for aluminium were between 8.21 and 74.08 mg kg(-1), while concentrations between 0.03 and 1.20 mg kg(-1) were found for manganese.

Column preconcentration of organotin with tropolone-immobilized and their determination by electrothermal atomization absorption spectrometry.

A method for the determination of total organic tin from marine water samples by electrothermal atomization absorption spectrometry (ETAAS) is described. Samples are previously preconcentrated with a chelating molecule (tropolone) impregnated on a macroporous polymer (Amberlite XAD-2). The graphite furnace programme and preconcentration parameters were optimized. Calibration and addition graphs were performed. Sensitivity obtained with this procedure was 13 ng l(-1). Relative standard deviation was always >10% and analytical recovery were satisfactory, approximately 100%. Some possible interferences were investigated, having no problems with this factor. This procedure allows the distinction between organotin compounds and inorganic tin IV, since the latter is not retained on the column.

Effectiveness of palladium as a chemical modifier for direct silver and manganese determination in cocaine and heroin by electrothermal atomic absorption spectrometry.

Methods for the direct determination of silver and manganese in cocaine and heroin by electrothermal atomic absorption spectrometry using palladium as chemical modifier have been developed. Cocaine samples, 0.5 g, were dissolved in 2 ml of 35.0% (m/v), HNO(3) diluting to 10 ml with ultrapure water. A comparative study of palladium, magnesium nitrate, palladium-magnesium nitrate and nitric acid used as chemical modifiers was carried out, and it was found that palladium alone is adequate to stabilize silver and manganese at charring temperatures of 1000 and 1300 degrees C respectively. A study was made on the insertion of a cooling step before the atomization step, and this approach was not advantageous. Limits of detection of 2.3 and 6.9 microg kg(-1) were obtained for silver and manganese respectively. The analytical recovery oscillated between 95.9 and 103.6% for silver and between 99.7 and 103.0% for manganese. Finally, a study of some interferences and a study of the precision and analytical recovery of the amount of sample were also carried out.