Evaluation of Zn Uptake by Helianthus annuus, in a Tropical Climate, Using Different Phytoremediation Strategies.

Phytoremediation is a rapidly expanding process due to its technical and economic viability. The objective of this work was to evaluate the phytoremediation potential of Helianthus annuus in three cultivation media: artificially contaminated Catalão soil, hydroponics and roadside soil. In hydroponics, ZnCl2 doses 0.32 mgL- 1, 29.94 mgL- 1, 60.06 mgL- 1, 119.94 mgL- 1 were used. While in the artificially contaminated soil, the doses were 0 mgkg- 1, 299 mgkg- 1, 599 mgkg- 1, 1498 mgkg- 1. Physiological analyzes made it possible to demonstrate that treatments T3 and T4, with the highest concentrations of the metal, inhibited growth and promoted darkening of the roots. The highest Zn contents occurred in the aerial part. The results indicated that Helianthus annuus was classified as hyperaccumulator due to its ability to accumulate high levels of Zn mainly in artificially contaminated soil.

Disposable electrochemical sensor: Highly sensitive determination of nitrofurazone antibiotic in environmental samples and pharmaceutical formulations.

The study presents the successful development of a new electrochemical sensor with low cost and disposability for application in nitrofurazone detection in environmental and pharmaceutical samples. The sensors were fabricated using materials obtained from local storage and conductive carbon ink. The modification of the screen-printed electrodes with the hybrid nanomaterial based on silver nanoparticles, carbon quantum dots, and carbon nanotubes showed synergistic contributions in the nitrofurazone electrooxidation, as observed in the wide linear range (0.008 at 15.051 µM), with a sensitivity of 0.650 µA/µM. The limit of detection obtained was 4.6 nM. Differential pulse voltammetry, cyclic voltammetry, X-ray photoelectron spectroscopy, X-ray diffraction analysis, and high-resolution transmission electron microscopy were used to evaluate the electrochemical and structural characteristics. Studies of possible interferences were considered with nitrofurazone in the presence of the ions and organic molecules. The results were satisfactory, with a variation of 93.3% ± 4.39% at 100% ± 2.40%. The low volume used in the analyses (50 µL), disposability, high sensibility, selectivity, and low limit of detection are advantages that make the proposed sensor an electrochemical tool of high viability for the NFZ detection in environmental matrices and pharmaceutical formulations.

Evaluation of microplastic contamination by metals in a controlled environment: A risk to be considered.

The metal contamination and the degradation of polyethylene terephthalate (PET) due to human activities have contributed to the worsening of environmental problems in aquatic systems. Therefore, the study aimed to evaluate PET microplastic adsorption levels when exposed to high amounts of Ni, Cu and Co. The PET microplastic was characterized by scanning electron microscopy, Brunner-Emmet-Teller, porosimetry system, Barrett-Joyner-Halenda and Fourier transform infrared spectroscopy with attenuated total reflectance for evaluation of surface morphology, surface area, porosity, pore size and functional groups, respectively. The results showed that the surface area, the presence of macro and mesopores, and the functional groups influence the adsorption of metals on the surface of PET microplastic. The adsorption isotherms confirmed the presence of mesoporosity and macroporosity on the PET microplastic surface. The Freundlich and Langmuir models were used to study the adsorption capacity. The kinetics of adsorptions were interpreted using pseudo-first order and pseudo-second order models. The results indicated that the Langmuir isotherm and the pseudo-second order adequately described the adsorption of metals by the PET microplastic. The removal rates by the PET microplastic varied from 8 to 34% for Ni, 5 to 40% for Cu and 7 to 27% for Co after a period of 5 days. Furthermore, the adsorption was predominantly chemical and extremely fast, indicating that the presence of microplastics in the environment can lead to a rapid metal accumulation which elevates the hazards potential of microplastic in living beings.

An electrochemical sensor-based carbon black associated with a modified mixed oxide (SiO2/TiO2/Sb2O5) for direct determination of thiamethoxam in raw honey and water samples.

The study aimed to develop an electrochemical sensor based on glassy carbon, mixed oxide (SiO2/TiO2/Sb2O5), and carbon black. The material was synthesized, characterized, and used to determine thiamethoxam in raw honey and water. The morphologic structure and electrochemical performance of the sensor was characterized by scanning electron microscopy and cyclic voltammetry. Differential pulse voltammetry with a concentration of 0.1 mol L-1 of Britton-Robinson buffer at pH 7.0 allowed the generation of a method to determine thiamethoxam in a linear range of 0.25 to 100.5 µmol L-1 and with a limit of detection of 0.012 µmol L-1. The system efficiently quantified traces of thiamethoxam in raw honey and tap water samples. The modified sensor did not present interferences of K+, Na+, Ca2+, Mg2+, glyphosate, imidacloprid, and carbendazim. In addition, the device showed good recovery values for thiamethoxam when applied directly to honey and water samples without any treatment, presenting an electrochemical sensor to monitor real-time hazardous substances in environmental and food matrices.