RESUMEN
The U.S. Environmental Protection Agency estimates that there are over 3.2 million abandoned wells in the United States. Studies conducted on gas emissions from abandoned wells have been limited to methane, a powerful greenhouse gas, due to concerns regarding climate change. However, volatile organic compounds (VOCs), including benzene, a known human carcinogen, are known to be associated with upstream oil and gas development and hence could also be released when methane is emitted to the atmosphere. In this investigation, we analyze gas from 48 abandoned wells in western Pennsylvania for fixed gases, light hydrocarbons, and VOCs and estimate associated emission rates. We demonstrate that (1) gas from abandoned wells contains VOCs, including benzene; (2) VOCs are emitted from abandoned wells, the magnitude of which depends on the flow rate and concentration of VOCs in the gas stream; and (3) nearly one-quarter of abandoned wells are located within 100 m of buildings, including residences, in Pennsylvania. Together, these observations indicate that further investigation is necessary to determine whether emissions from abandoned wells pose an inhalation risk to people living, working, or congregating near abandoned wells.
RESUMEN
Long-term exposure to ambient fine particulate matter (PM2.5) is the second leading risk factor of premature death in Sub-Saharan Africa. We use GEOS-Chem to quantify the effects of (a) trash burning, (b) residential solid-fuel burning, and (c) open biomass burning (BB) (i.e., landscape fires) on ambient PM2.5 and PM2.5-attributable mortality in Africa. Using a series of sensitivity simulations, we excluded each of the three combustion sources in each of five African regions. We estimate that in 2017 emissions from these three combustion sources within Africa increased global ambient PM2.5 by 2%, leading to 203,000 (95% confidence interval: 133,000-259,000) premature mortalities yr-1 globally and 167,000 premature mortalities yr-1 in Africa. BB contributes more ambient PM2.5-related premature mortalities per year (63%) than residential solid-fuel burning (29%) and trash burning (8%). Open BB in Central Africa leads to the largest number of PM2.5-attributed mortalities inside the region, while trash burning in North Africa and residential solid-fuel burning in West Africa contribute the most regional mortalities for each source. Overall, Africa has a unique ambient air pollution profile because natural sources, such as windblown dust and BB, contribute strongly to ambient PM2.5 levels and PM2.5-related mortality. Air pollution policies may need to focus on taking preventative measures to avoid exposure to ambient PM2.5 from these less-controllable sources.
RESUMEN
Atmospheric models of secondary organic aerosol (OA) (SOA) typically rely on parameters derived from environmental chambers. Chambers are subject to experimental artifacts, including losses of (1) particles to the walls (PWL), (2) vapors to the particles on the wall (V2PWL), and (3) vapors to the wall directly (VWL). We present a method for deriving artifact-corrected SOA parameters and translating these to volatility basis set (VBS) parameters for use in chemical transport models (CTMs). Our process involves combining a box model that accounts for chamber artifacts (Statistical Oxidation Model with a TwO-Moment Aerosol Sectional model (SOM-TOMAS)) with a pseudo-atmospheric simulation to develop VBS parameters that are fit across a range of OA mass concentrations. We found that VWL led to the highest percentage change in chamber SOA mass yields (high NOx: 36-680%; low NOx: 55-250%), followed by PWL (high NOx: 8-39%; low NOx: 10-37%), while the effects of V2PWL are negligible. In contrast to earlier work that assumed that V2PWL was a meaningful loss pathway, we show that V2PWL is an unimportant SOA loss pathway and can be ignored when analyzing chamber data. Using our updated VBS parameters, we found that not accounting for VWL may lead surface-level OA to be underestimated by 24% (0.25 µg m-3) as a global average or up to 130% (9.0 µg m-3) in regions of high biogenic or anthropogenic activity. Finally, we found that accurately accounting for PWL and VWL improves model-measurement agreement for fine mode aerosol mass concentrations (PM2.5) in the GEOS-Chem model.
Asunto(s)
Contaminantes Atmosféricos , Contaminantes Atmosféricos/análisis , Artefactos , Gases , Modelos Químicos , Aerosoles/análisisRESUMEN
The presence of hazardous air pollutants (HAPs) entrained in end-use natural gas (NG) is an understudied source of human health risks. We performed trace gas analyses on 185 unburned NG samples collected from 159 unique residential NG stoves across seven geographic regions in California. Our analyses commonly detected 12 HAPs with significant variability across region and gas utility. Mean regional benzene, toluene, ethylbenzene, and total xylenes (BTEX) concentrations in end-use NG ranged from 1.6-25 ppmvâbenzene alone was detected in 99% of samples, and mean concentrations ranged from 0.7-12 ppmv (max: 66 ppmv). By applying previously reported NG and methane emission rates throughout California's transmission, storage, and distribution systems, we estimated statewide benzene emissions of 4,200 (95% CI: 1,800-9,700) kg yr-1 that are currently not included in any statewide inventoriesâequal to the annual benzene emissions from nearly 60,000 light-duty gasoline vehicles. Additionally, we found that NG leakage from stoves and ovens while not in use can result in indoor benzene concentrations that can exceed the California Office of Environmental Health Hazard Assessment 8-h Reference Exposure Level of 0.94 ppbvâbenzene concentrations comparable to environmental tobacco smoke. This study supports the need to further improve our understanding of leaked downstream NG as a source of health risk.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Humanos , Contaminantes Atmosféricos/análisis , Gas Natural/análisis , Benceno , Monitoreo del Ambiente , Contaminación del Aire/análisis , Derivados del Benceno/análisis , Xilenos , ToluenoRESUMEN
Wet and dry deposition remove aerosols from the atmosphere, and these processes control aerosol lifetime and thus impact climate and air quality. Dry deposition is a significant source of aerosol uncertainty in global chemical transport and climate models. Dry deposition parameterizations in most global models were developed when few particle deposition measurements were available. However, new measurement techniques have enabled more size-resolved particle flux observations. We combined literature measurements with data that we collected over a grassland in Oklahoma and a pine forest in Colorado to develop a dry deposition parameterization. We find that relative to observations, previous parameterizations overestimated deposition of the accumulation and Aitken mode particles, and underestimated in the coarse mode. These systematic differences in observed and modeled accumulation mode particle deposition velocities are as large as an order of magnitude over terrestrial ecosystems. As accumulation mode particles form most of the cloud condensation nuclei (CCN) that influence the indirect radiative effect, this model-measurement discrepancy in dry deposition alters modeled CCN and radiative forcing. We present a revised observationally driven parameterization for regional and global aerosol models. Using this revised dry deposition scheme in the Goddard Earth Observing System (GEOS)-Chem chemical transport model, we find that global surface accumulation-mode number concentrations increase by 62% and enhance the global combined anthropogenic and natural aerosol indirect effect by -0.63 W m-2 Our observationally constrained approach should reduce the uncertainty of particle dry deposition in global chemical transport models.
RESUMEN
Monitoring improved cookstove adoption and usage in developing countries can help anticipate potential health and environmental benefits that may result from household energy interventions. This study explores stove-usage monitor (SUM)-derived usage data from field studies in China (52 stoves, 1422 monitoring days), Honduras (270 stoves, 630 monitoring days), India (19 stoves, 565 monitoring days), and Uganda (38 stoves, 1007 monitoring days). Traditional stove usage was found to be generally similar among four seemingly disparate countries in terms of cooking habits, with average usage of between 171 and 257 minutes per day for the most-used stoves. In Honduras, where survey-based usage data were also collected, there was only modest agreement between sensor data and self-reported user data. For Indian homes, we combined stove-usage data with a single-zone Monte Carlo box model to estimate kitchen-level PM2.5 and CO concentrations under various scenarios of cleaner cookstove adoption. We defined clean cookstove performance based on the International Standards Organization (ISO) voluntary guidelines. Model results showed that even with 75% displacement of traditional stoves with the cleanest available stove (ISO tier-5), World Health Organization 24 hours PM2.5 standards were exceeded in 96.4% of model runs, underscoring the importance of full displacement.
Asunto(s)
Contaminación del Aire Interior , Culinaria , China , Composición Familiar , Honduras , Artículos Domésticos , Productos Domésticos , Humanos , India , Material Particulado , Población Rural , UgandaRESUMEN
Cooking and heating with solid fuels results in high levels of household air pollutants, including particulate matter (PM); however, limited data exist for size fractions smaller than PM2.5 (diameter less than 2.5 µm). We collected 24-h time-resolved measurements of PM2.5 (n = 27) and particle number concentrations (PNC, average diameter 10-700 nm) (n = 44; 24 with paired PM2.5 and PNC) in homes with wood-burning traditional and Justa (i.e., with an engineered combustion chamber and chimney) cookstoves in rural Honduras. The median 24-h PM2.5 concentration (n = 27) was 79 µg/m3 (interquartile range [IQR]: 44-174 µg/m3); traditional (n = 15): 130 µg/m3 (IQR: 48-250 µg/m3); Justa (n = 12): 66 µg/m3 (IQR: 44-97 µg/m3). The median 24-h PNC (n = 44) was 8.5 × 104 particles (pt)/cm3 (IQR: 3.8 × 104-1.8 × 105 pt/cm3); traditional (n = 27): 1.3 × 105 pt/cm3 (IQR: 3.3 × 104-2.0 × 105 pt/cm3); Justa (n = 17): 6.3 × 104 pt/cm3 (IQR: 4.0 × 104-1.2 × 105 pt/cm3). The 24-h average PM2.5 and particle number concentrations were correlated for the full sample of cookstoves (n = 24, Spearman ρ: 0.83); correlations between PM2.5 and PNC were higher in traditional stove kitchens (n = 12, ρ: 0.93) than in Justa stove kitchens (n = 12, ρ: 0.67). The 24-h average concentrations of PM2.5 and PNC were also correlated with the maximum average concentrations during shorter-term averaging windows of one-, five-, 15-, and 60-min, respectively (Spearman ρ: PM2.5 [0.65, 0.85, 0.82, 0.71], PNC [0.74, 0.86, 0.88, 0.86]). Given the moderate correlations observed between 24-h PM2.5 and PNC and between 24-h and the shorter-term averaging windows within size fractions, investigators may need to consider cost-effectiveness and information gained by measuring both size fractions for the study objective. Further evaluations of other stove and fuel combinations are needed.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Culinaria/instrumentación , Material Particulado/análisis , Biomasa , Monitoreo del Ambiente , Honduras , HumanosRESUMEN
Cloud condensation nuclei (CCN) can affect cloud properties and therefore Earth's radiative balance1-3. New particle formation (NPF) from condensable vapours in the free troposphere has been suggested to contribute to CCN, especially in remote, pristine atmospheric regions4, but direct evidence is sparse, and the magnitude of this contribution is uncertain5-7. Here we use in situ aircraft measurements of vertical profiles of aerosol size distributions to present a global-scale survey of NPF occurrence. We observe intense NPF at high altitudes in tropical convective regions over both Pacific and Atlantic oceans. Together with the results of chemical-transport models, our findings indicate that NPF persists at all longitudes as a global-scale band in the tropical upper troposphere, covering about 40 per cent of Earth's surface. Furthermore, we find that this NPF in the tropical upper troposphere is a globally important source of CCN in the lower troposphere, where CCN can affect cloud properties. Our findings suggest that the production of CCN as new particles descend towards the surface is not adequately captured in global models, which tend to underestimate both the magnitude of tropical upper tropospheric NPF and the subsequent growth of new particles to CCN sizes.
Asunto(s)
Atmósfera , Material Particulado , Aerosoles , Océano Atlántico , Modelos Químicos , Océano Pacífico , Clima TropicalRESUMEN
Cookstoves emit many pollutants that are harmful to human health and the environment. However, most of the existing scientific literature focuses on fine particulate matter (PM2.5) and carbon monoxide (CO). We present an extensive data set of speciated air pollution emissions from wood, charcoal, kerosene, and liquefied petroleum gas (LPG) cookstoves. One-hundred and twenty gas- and particle-phase constituents-including organic carbon, elemental carbon (EC), ultrafine particles (10-100 nm), inorganic ions, carbohydrates, and volatile/semivolatile organic compounds (e.g., alkanes, alkenes, alkynes, aromatics, carbonyls, and polycyclic aromatic hydrocarbons (PAHs))-were measured in the exhaust from 26 stove/fuel combinations. We find that improved biomass stoves tend to reduce PM2.5 emissions; however, certain design features (e.g., insulation or a fan) tend to increase relative levels of other coemitted pollutants (e.g., EC ultrafine particles, carbonyls, or PAHs, depending on stove type). In contrast, the pressurized kerosene and LPG stoves reduced all pollutants relative to a traditional three-stone fire (≥93% and ≥79%, respectively). Finally, we find that PM2.5 and CO are not strong predictors of coemitted pollutants, which is problematic because these pollutants may not be indicators of other cookstove smoke constituents (such as formaldehyde and acetaldehyde) that may be emitted at concentrations that are harmful to human health.
Asunto(s)
Contaminantes Atmosféricos , Contaminantes Ambientales , Biomasa , Culinaria , Combustibles Fósiles , Humanos , Material ParticuladoRESUMEN
Exposure to air pollution from solid-fuel cookstoves is a leading risk factor for premature death; however, the effect of fuel moisture content on air pollutant emissions from solid-fuel cookstoves remains poorly constrained. The objective of this work was to characterize emissions from a rocket-elbow cookstove burning wood at three different moisture levels (5%, 15%, and 25% on a dry mass basis). Emissions of carbon dioxide (CO2), carbon monoxide (CO), methane, fine particulate matter (PM2.5), PM2.5 elemental carbon (EC), PM2.5 organic carbon, formaldehyde, acetaldehyde, benzene, toluene, ethylbenzene, and xylenes were measured. Emission factors (EFs; g·MJdelivered-1) for all pollutants, except CO2 and EC, increased with increasing fuel moisture content: CO EFs increased by 84%, PM2.5 EFs increased by 149%, formaldehyde EFs increased by 216%, and benzene EFs increased by 82%. Both modified combustion efficiency and the temperature at the combustion chamber exit decreased with increasing fuel moisture, suggesting that the energy required to vaporize water in the fuel led to lower temperatures in the combustion chamber and lower gas-phase oxidation rates. These results illustrate that changes in fuel equilibrium moisture content could cause EFs for pollutants such as PM2.5 to vary by a factor of 2 or more across different geographic regions.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Codo , Monitoreo del Ambiente , Material ParticuladoRESUMEN
Emissions from solid-fuel cookstoves have been linked to indoor and outdoor air pollution, climate forcing, and human disease. Although task-based laboratory protocols, such as the Water Boiling Test (WBT), overestimate the ability of improved stoves to lower emissions, WBT emissions data are commonly used to benchmark cookstove performance, estimate indoor and outdoor air pollution concentrations, estimate impacts of stove intervention projects, and select stoves for large-scale control trials. Multiple-firepower testing has been proposed as an alternative to the WBT and is the basis for a new standardized protocol (ISO 19867-1:2018); however, data are needed to assess the value of this approach. In this work, we (a) developed a Firepower Sweep Test [FST], (b) compared emissions from the FST, WBT, and in-home cooking, and (c) quantified the relationship between firepower and emissions using correlation analysis and linear model selection. Twenty-three stove-fuel combinations were evaluated. The FST reproduced the range of PM2.5 and CO emissions observed in the field, including high emissions events not typically observed under the WBT. Firepower was modestly correlated with emissions, although the relationship varied between stove-fuel combinations. Our results justify incorporating multiple-firepower testing into laboratory-based protocols but demonstrate that firepower alone cannot explain the observed variability in cookstove emissions.