Impact of aluminum adjuvants on the stability of pneumococcal polysaccharide-protein conjugate vaccines.

Development of a vaccine drug product requires formulation optimization to ensure that the vaccine's effectiveness is preserved upon storage throughout the shelf-life of the product. Although aluminum adjuvants have been widely used in vaccine formulations to safely and effectively potentiate an immune response, careful attention must be directed towards ensuring that the type of aluminum adjuvant does not impact the stability of the antigenic composition. PCV15 is a polysaccharide-protein conjugate vaccine comprising the pneumococcal polysaccharide (PnPs) serotypes (1, 3, 4, 5, 6A, 6B, 7F, 9V, 14, 18C, 19A, 19F, 22F, 23F and 33F), each individually conjugated to the protein carrier CRM197. PCV15 was formulated with either amorphous aluminum hydroxyphosphate sulfate adjuvant (AAHS) or aluminum phosphate adjuvant (AP) and examined for both stability and immunogenicity. Using a collection of methods to evaluate vaccine stability, it was discovered that certain PCV15 serotypes (e.g., 6A, 19A, 19F) formulated with AAHS resulted in a reduction of immunogenicity in vivo and a reduction in recoverable dose as tested by an in vitro potency assay. The same polysaccharide-protein conjugates formulated with AP were stable regarding all measures tested. Moreover, the reduction in potency of certain serotypes correlated with chemical degradation of the polysaccharide antigen caused by the aluminum adjuvant as measured by reducing polyacrylamide gel electrophoresis (SDS-PAGE), High-Pressure Size Exclusion Chromatography coupled with UV detection (HPSEC-UV) and ELISA immunoassay. This study suggests a formulation, which includes AAHS, may negatively impact the stability of a pneumococcal polysaccharide-protein conjugate vaccine that contains phosphodiester groups. This decrease in stability would likely result in a decrease in the "active" concentration of antigen dose, and herein, it is shown that such instability directly compromised vaccine immunogenicity in an animal model. The results presented in this study help to explain critical degradation mechanisms of pneumococcal polysaccharide-protein conjugate vaccines.

Lessons Learned from the Development and Roll-Out of the rVSVΔG-ZEBOV-GP Zaire ebolavirus Vaccine to Inform Marburg Virus and Sudan ebolavirus Vaccines.

This review describes key aspects of the development of the rVSVΔG-ZEBOV-GP Ebola vaccine and key activities which are continuing to further expand our knowledge of the product. Extensive partnerships and innovative approaches were used to address the various challenges encountered during this process. The rVSVΔG-ZEBOV-GP Ebola vaccine was initially approved by the European Medicines Agency and prequalified by the World Health Organization in November 2019. It was approved by the United States Food and Drug Administration in December 2019 and approved in five African countries within 90 days of prequalification. The development resulted in the first stockpile of a registered Ebola vaccine that is available to support outbreak response. This also provides insights into how the example of rVSVΔG-ZEBOV-GP can inform the development of vaccines for Sudan ebolavirus, Marburg virus, and other emerging epidemic diseases in terms of the types of approaches and data needed to support product registration, availability, and the use of a filovirus vaccine.

Analytical technology development to monitor the stability of Polysaccharide-Protein conjugate vaccines.

The covalent attachment of a bacterial-derived capsular polysaccharide to protein is of critical importance in transforming the polysaccharide from an antigen with limited immunogenicity in infants and older adults to an antigen that can prevent potentially fatal disease. For a polysaccharide-protein conjugate vaccine (PCV) candidate to be successful, it must be sufficiently stable. Chemical breakage of carbohydrate bonds in the polysaccharide may result in the reduction of "conjugate dose" and could negatively impact immunogenicity and the ability of the vaccine to prime for memory responses. Therefore, development of analytical tools to monitor the integrity of a polysaccharide-protein conjugate (glycoconjugate) vaccine is of practical significance. In this work, reducing SDS-PAGE, Intrinsic Protein Fluorescence Spectroscopy (IPFS), Differential Scanning Fluorimetry (DSF) were evaluated methods to study the impact of time, temperature, and formulation composition on the stability of a glycoconjugate vaccine prepared by multisite coupling of polysaccharide to a carrier protein. In addition, an automated capillary Western system was also evaluated to study the impact of storage on glycoconjugate vaccine stability. Two streptococcus pneumoniae polysaccharide-protein conjugates (serotype 3 and serotype 19A) were chosen to examine their physicochemical stability when formulated as a single antigen vaccine. While all methods require only a small amount of test article and can test multiple samples per assay run, automated capillary Western has the additional advantage of being highly sensitive even at low concentrations in complex vaccine formulations that contain aluminum adjuvant and multiple antigens. Results suggest that automated capillary Western is stability-indicating and may be an effective analytical technology tool for the formulation development of a multivalent glycoconjugate vaccine.

Enabling Lyophilized Pneumococcal Conjugate Vaccines Through Formulation Design and Excipient Selection Suitable for A Multivalent Adjuvanted Vaccine.

Despite a consistent benefit of existing pneumococcal conjugate vaccine (PCV) on invasive pneumococcal disease and pneumonia across different epidemiological settings a tremendous gap exists towards global PCV coverage. Currently, no lyophilized dosage form exists in the PCV global vaccine marketplace and currently licensed vaccines target some, but not all relevant serotypes of Streptococcus pneumoniae. The development of lyophilized presentations of an adjuvanted multivalent vaccine formulation that aligns with the evolving epidemiological assessment of the pneumococcal disease offers broader coverage with distinct cold chain and thermostability advantages. To make progress towards this goal, we evaluated the feasibility of developing new formulation to enable a lyophilized adjuvanted PCV vaccine containing 15 different serotypes. Our findings successfully demonstrate a formulation design space that enables enhanced physical stability which controls vaccine agglomeration, preserves in-vitro vaccine potency, maintains PCV antigen adsorption, and yields elegant lyophilized cakes with acceptable clinically relevant reconstitution times. This research also demonstrates the benefit of utilizing specific vaccine formulation excipients and the effectiveness of excipient combinations that may be beneficial for other multivalent adjuvant containing vaccines to enable novel lyophilized formulations necessary for improved global vaccine access.

Examination of the effect of agitation on the potency of the Ebola Zaire vaccine rVSVΔG-ZEBOV-GP.

The Ebolavirus vaccine (rVSVΔG-ZEBOV-GP) is stored at -80 to -60 °C and should be kept frozen for transport. Due to significant logistical challenges, frozen transport is not feasible for some remote locations. To determine if local distribution at 2-8 °C is a potential option for these locations, a study was conducted to evaluate the impact of agitation on the thawed vaccine. After up to 7 days of constant agitation, no impact on vaccine potency was evident for the agitated vaccine versus the corresponding vaccine kept stationary at 2-8 °C. In conclusion, in-country transport of the Ebolavirus vaccine, rVSVΔG-ZEBOV-GP, at 2-8 °C appears to be a feasible option for those remote locations where significant logistical challenges prohibit transporting the vaccine at -80 to -60 °C.

High Throughput Differential Scanning Fluorimetry (DSF) Formulation Screening with Complementary Dyes to Assess Protein Unfolding and Aggregation in Presence of Surfactants.

PURPOSE: The purpose was to evaluate DSF for high throughput screening of protein thermal stability (unfolding/ aggregation) across a wide range of formulations. Particular focus was exploring PROTEOSTAT® - a commercially available fluorescent rotor dye - for detection of aggregation in surfactant containing formulations. Commonly used hydrophobic dyes (e.g. SYPRO™ Orange) interact with surfactants, complicating DSF measurements. METHODS: CRM197 formulations were prepared and analyzed in standard 96-well plate rT-PCR system, using SYPRO™ Orange and PROTEOSTAT® dyes. Orthogonal techniques (DLS and IPF) are employed to confirm unfolding/aggregation in selected formulations. Selected formulations are subjected to non-thermal stresses (stirring and shaking) in plate based format to characterize aggregation with PROTEOSTAT®. RESULTS: Agreement is observed between SYPRO™ Orange (unfolding) and PROTEOSTAT® (aggregation) DSF melt temperatures across wide range of non-surfactant formulations. PROTEOSTAT® can clearly detect temperature induced aggregation in low concentration (0.2 mg/mL) CRM197 formulations containing surfactant. PROTEOSTAT® can be used to explore aggregation due to non-thermal stresses in plate based format amenable to high throughput screening. CONCLUSIONS: DSF measurements with complementary extrinsic dyes (PROTEOSTAT®, SYPRO™ Orange) are suitable for high throughput screening of antigen thermal stability, across a wide range of relevant formulation conditions - including surfactants -with standard, plate based rT-PCR instrumentation.

Accelerating Vaccine Formulation Development Using Design of Experiment Stability Studies.

Vaccine drug product thermal stability often depends on formulation input factors and how they interact. Scientific understanding and professional experience typically allows vaccine formulators to accurately predict the thermal stability output based on formulation input factors such as pH, ionic strength, and excipients. Thermal stability predictions, however, are not enough for regulators. Stability claims must be supported by experimental data. The Quality by Design approach of Design of Experiment (DoE) is well suited to describe formulation outputs such as thermal stability in terms of formulation input factors. A DoE approach particularly at elevated temperatures that induce accelerated degradation can provide empirical understanding of how vaccine formulation input factors and interactions affect vaccine stability output performance. This is possible even when clear scientific understanding of particular formulation stability mechanisms are lacking. A DoE approach was used in an accelerated 37(°)C stability study of an aluminum adjuvant Neisseria meningitidis serogroup B vaccine. Formulation stability differences were identified after only 15 days into the study. We believe this study demonstrates the power of combining DoE methodology with accelerated stress stability studies to accelerate and improve vaccine formulation development programs particularly during the preformulation stage.

Characterization of Propylene Glycol-Mitigated Freeze/Thaw Agglomeration of a Frozen Liquid nOMV Vaccine Formulation by Static Light Scattering and Micro-Flow Imaging.

UNLABELLED: The purpose of this work was to investigate the susceptibility of an aluminum adjuvant and an aluminum-adjuvanted native outer membrane vesicle (nOMV) vaccine formulation to freeze/thaw-induced agglomeration using static light scattering and micro-flow Imaging analysis; and to evaluate the use of propylene glycol as a vaccine formulation excipient by which freeze/thaw-induced agglomeration of a nOMV vaccine formulation could be mitigated. Our results indicate that including 7% v/v propylene glycol in an nOMV containing aluminum adjuvanted vaccine formulation, mitigates freeze/thaw-induced agglomeration. LAY ABSTRACT: We evaluated the effect of freeze-thawing on an aluminum adjuvant and an aluminum adjuvanted native outer membrane vesicle (nOMV) vaccine formulation. Specifically, we characterized the freeze/thaw-induced agglomeration through the use of static light scattering, micro-flow imaging, and cryo-electron microscopy analysis. Further, we evaluated the use of 0-9% v/v propylene glycol as an excipient which could be included in the formulation for the purpose of mitigating the agglomeration induced by freeze/thaw. The results indicate that using 7% v/v propylene glycol as a formulation excipient is effective at mitigating agglomeration of the nOMV vaccine formulation, otherwise induced by freeze-thawing.

Detecting and preventing reversion to toxicity for a formaldehyde-treated C. difficile toxin B mutant.

The toxicity of Clostridium difficile large clostridial toxin B (TcdB) can be reduced by many orders of magnitude by a combination of targeted point mutations. However, a TcdB mutant with five point mutations (referred to herein as mTcdB) still has residual toxicity that can be detected in cell-based assays and in-vivo mouse toxicity assays. This residual toxicity can be effectively removed by treatment with formaldehyde in solution. Storage of the formaldehyde-treated mTcdB as a liquid can result in reversion over time back to the mTcdB level of toxicity, with the rate of reversion dependent on the storage temperature. We found that for both the "forward" mTcdB detoxification reaction with formaldehyde, and the "reverse" reversion to toxicity reaction, mouse toxicity correlated with several biochemical assays including anion exchange chromatography retention time and appearance on SDS-PAGE. Maintenance of a low concentration of formaldehyde prevents reversion to toxicity in liquid formulations. However, when samples with 0.016% (v/v) formaldehyde were lyophilized and stored at 37 °C, formaldehyde continued to react with and modify the mTcdB in the lyophilized state. Lyophilization alone effectively prevented reversion to toxicity for formaldehyde-treated, formaldehyde-removed mTcdB samples stored at 37 °C for 6 months. Formaldehyde-treated, formaldehyde-removed lyophilized mTcdB showed no evidence of reversion to toxicity, appeared stable by several assays, and was immunogenic in mice, even after storage for 6 months at 37 °C.

High throughput formulation screening for global aggregation behaviors of three monoclonal antibodies.

Global aggregation behaviors of three distinct monoclonal antibodies were characterized by high throughput, multiassay analysis. First, extensive screening of formulations was performed using both incubation at elevated temperature and differential thermal scanning. In incubation studies, formulation conditions representing native favored, native favored but with particulate formation, unfolding with slow aggregation, and fast aggregation with or without phase separation were mapped across a wide range of pH and ionic strength. The sample types or aggregation kinetic scenarios were classified based on fluorescence spectroscopy, light scattering, and micron particle count. Furthermore, apparent melting point was determined for each formulation condition by differential thermal scanning. The global aggregation behaviors and their apparent melting points together highlight the common underlying aggregation pathways and kinetics for the three antibodies. Overall, incorporating multistage aggregation mechanisms in multivariate data analysis provides valuable insights to what and how high throughput techniques can be implemented. Understanding global aggregation behaviors is a key element toward development of rational screening approach.

The use of flow cytometry for the detection of subvisible particles in therapeutic protein formulations.

The amount, identity, and size distribution of particles in parenteral therapeutic protein formulations are of immense interest due to potential safety and efficacy-related implications. In this communication, we describe the use of a flow cytometer equipped with forward- and side-scattering as well as fluorescence detectors, to determine the number of subvisible particles in monoclonal antibody formulations. The method appears to detect particles of size 1 µ and larger, requiring relatively small sample volumes to estimate subvisible particle counts. Additionally, it facilitates differentiation of proteinaceous particles after staining with a fluorescent hydrophobic dye. The method is expected to be particularly well suited for pharmaceutical development, because it provides increased throughput due to the use of a 96-well autosampler.

An industry perspective on the monitoring of subvisible particles as a quality attribute for protein therapeutics.

Concern around the lack of monitoring of proteinaceous subvisible particulates in the 0.1-10 microm range has been heightened (Carpenter et al., 2009, J Pharm Sci 98: 1202-1205), primarily due to uncertainty around the potential immunogenicity risk from these particles. This article, representing the opinions of a number of industry scientists, aims to further the discussion by developing a common understanding around the technical capabilities, limitations, as well as utility of monitoring this size range; reiterating that the link between aggregation and clinical immunogenicity has not been unequivocally established; and emphasizing that such particles are present in marketed products which remain safe and efficacious despite the lack of monitoring. Measurement of subvisible particulates in the <10 microm size range has value as an aid in product development and characterization. Limitations in measurement technologies, variability from container/closure, concentration, viscosity, history, and inherent batch heterogeneity, make these measurements unsuitable as specification for release and stability or for comparability, at the present time. Such particles constitute microgram levels of protein with currently monitored sizes >or=10 microm representing the largest fraction. These levels are well below what is detected or reported for other product quality attributes. Subvisible particles remain a product quality attribute that is also qualified in clinical trials.