An Integrated Testing Strategy (ITS) to assess the environmental compatibility of wood protection techniques.

To quantify the possible impact of different wood protection techniques on the aquatic environment, we applied a tiered Integrated Testing Strategy (ITS) on leachates obtained from untreated (UTW) Norway spruce (Picea abies), specimens treated with a copper-ethanolamine-based preservative solution, complying with the Use Class 3 (UC3), and specimens thermally modified (TM). Different maturation times in water were tested to verify whether toxicant leaching is time-dependent. Tier I tests, addressing acute effects on Aliivibrio fischeri, Raphidocelis subcapitata, and Daphnia magna, evidenced that TM toxicity was comparable or even lower than in UTW. Conversely, UC3 significantly affected all species compared to UTW, also after 30 days of maturation in water, and was not considered an environmentally acceptable wood preservation solution. Tier II (effects on early-life stages of Lymnea auricularia) and III (chronic effects on D. magna and L. auricularia) performed on UTW and TM confirmed the latter as an environmentally acceptable treatment, with increasing maturation times resulting in decreased adverse effects. The ITS allowed for rapid and reliable identification of potentially harmful effects due to preservation treatments, addressed the choice for a less impacting solution, and can be effective for manufacturers in identifying more environmentally friendly solutions while developing their products.

Australian Black summer smoke signal on Antarctic aerosol collected between New Zealand and the Ross sea.

Open biomass burning (BB) events are a well-known primary aerosol source, resulting in the emission of significant amount of gaseous and particulate matter and affecting Earth's radiation budget. The 2019-2020 summer, known as "Australian Black Summer", showed exceptional duration and intensity of seasonal wildfires, triggered by high temperatures and severe droughts. Since increasing megafires are predicted due to expected climate changes, it is critical to study the impact of BB aerosol on a large scale and evaluate related transport processes. In this study, five aerosol samples (total suspended particles with a diameter >1 µm) were collected during the XXXV Italian Expedition in Antarctica on board of the R/V Laura Bassi from 6th of January to February 16, 2020, along the sailing route from Lyttelton harbor (New Zealand) to Terra Nova Bay (Antarctica). Levoglucosan and its isomers have been analyzed as markers of BB, together with polycyclic aromatic hydrocarbons (PAHs), sucrose and alcohol sugars. Ionic species and carboxylic acids have been analyzed to support the identification of aerosol sources and its aging. Results showed high levoglucosan concentrations (325-1266 pg m-3) during the campaign, suggesting the widespread presence of smoke in the region, because of huge wildfire releases. Backward trajectories indicated the presence of long-range atmospheric transport from South America, probably carrying wildfires plume, in agreement with literature. Regional sources have been suggested for PAHs, particularly for 3-4 rings' compounds; monosaccharides, sucrose, arabitol, and mannitol were related to marine and biogenic contributions. In a warming climate scenario, more frequent and extensive wildfire episodes are expected in Australia, potentially altering albedo, aerosol radiative properties, and cloud interactions. Therefore, it is crucial to strengthens the investigations on the regional climatic effects of these events in Antarctica.

Hemp cultivation opportunities for marginal lands development.

Agricultural diversification and high-quality products deriving from sustainable crops such as hemp can represent a solution to revitalize marginal areas and reverse land abandonment. This study aimed at comparing four different hemp cultivars (Carmagnola Selezionata, "CS"; Futura 75, "FUT"; Felina 32, "FEL"; Secuieni Jubileu, "JUB") to provide information to select the best suited cultivar for cultivation in mountain marginal areas and for specific end-use applications. Hemp cultivars were cultivated in a single experimental field to compare their ecological and agronomic behavior (duration of life cycle phases, plant size and biomass allocation, and plant resource-use strategies). Through metabolomic analysis of both vegetative and reproductive parts of the plants we tested the presence of substances of nutraceutical interest and traced seed nutritional profile. The four cultivars had different ecological and agronomic behavior, and nutritional profile. We found several compounds with potential pharmaceutical and nutraceutical values in all parts of the plant (leaves, inflorescences, and stems). JUB resulted the most suitable for seed production while CS showed the highest content of bioactive compounds in flowers and leaves. FUT, showed the best suitability for multi-purpose cultivation, while FEL seemed to be not appropriate for the cultivation in mountain area. The multi-disciplinary approach we adopted was effective in distinguish across hemp cultivars and provided information to farmers for the selection of the best hemp cultivar to select. Hemp had a high potential for cultivation in marginal lands, demonstrating to be an economic resource due to its multi-purpose use and to the possibility to generate high-added values products. Our results could serve as a stimulus for the reintroduction of this culture in the study area and in other similar environments.

Characterization of Botanical Origin of Italian Honey by Carbohydrate Composition and Volatile Organic Compounds (VOCs).

Honey is a natural sweetener constituted by numerous macro- and micronutrients. Carbohydrates are the most representative, with glucose and fructose being the most abundant. Minor honey components like volatile organic compounds (VOCs), minerals, vitamins, amino acids are able to confer honey-specific properties and are useful to characterize and differentiate between honey varieties according to the botanical origin. The present work describes the chemical characterization of honeys of different botanical origin (multifloral, acacia, apple-dandelion, rhododendron, honeydew, and chestnut) produced and collected by beekeepers in the Trentino Alto-Adige region (Italy). Melissopalynological analysis was conducted to verify the botanical origin of samples and determine the frequency of different pollen families. The carbohydrate composition (fourteen sugars) and the profile of VOCs were evaluated permitting to investigate the relationship between pollen composition and the chemical profile of honey. Statistical analysis, particularly partial least squares discriminant analysis (PLS-DA), demonstrates the importance of classifying honey botanical origin on the basis of effective pollen composition, which directly influences honey's biochemistry, in order to correctly define properties and value of honeys.

Effects of Water Deficit and Heat Stress on Nicotiana langsdorffii Metabolomic Pattern Modified by Insertion of rolD Gene from Agrobacterium rhizogenes.

Abiotic stresses are major factors that negatively affect plant growth and productivity. Plants have developed complex strategies to ensure their survival and reproduction under adverse conditions, activating mechanisms that involve changes at different metabolic levels. In order to select stress-resistant species, research has focused on molecular studies and genetic engineering, showing promising results. In this work, the insertion of the rolD gene from Agrobacterium rhizogenes into Nicotiana langsdorffii plants is investigated, in order to assess the potential of this genetic modification towards mitigating water and heat stresses. Different approaches were combined: a high-throughput metabolomics and ionomics study was performed, together with the determination of important plant phytohormones. The aim was to identify the influence of abiotic stresses on plants and to highlight the effects of the rolD genetic modification on plant stress response. The most relevant compounds for each kind of stress were identified, belonging mainly to the classes of lipids, acyl sugars, glycosides, and amino acid derivatives. Water stress (WS) determined a decrease of elements and secondary metabolites, while amino acids and their derivatives increased, proving to be key molecules in this type of stress. RolD plants exposed to high temperature stress (HS) presented higher dry weight levels than controls, as well as increased amounts of K and adenosine and lower levels of damage-associated metabolites, suggesting the increased resistance of rolD-modified plants toward HS.

Carbohydrate determination in honey samples by ion chromatography-mass spectrometry (HPAEC-MS).

Honey is a complex mixture of carbohydrates, in which the monosaccharides glucose and fructose are the most abundant compounds. Currently, more than 20 oligosaccharides have been identified in different varieties of honey normally at quite low concentration. A method was developed and validated using high-performance anion-exchange chromatography coupled to a mass spectrometry detector to investigate the composition of carbohydrates in honey samples. The method was tested for linearity range, trueness, instrumental and method detection and quantification limits, repeatability, and reproducibility. It was applied to determine seven monosaccharides, eight disaccharides, four trisaccharides, and one tetrasaccharide in various honey samples. The present work describes the composition of sugars in unifloral, multifloral, and some honeydew honey, which were produced and collected by beekeepers in the Trentino Alto-Adige region. Statistical techniques have been used to establish a relationship based on levels of carbohydrates among different Italian honey. The results emphasize that mono- and oligosaccharide profiles can be useful to discriminate different honeys according to their floral characteristics and inter-annual variability.

High Performance Size Exclusion Chromatography-Inductively Coupled Plasma-Mass Spectrometry to Study the Copper and Cadmium Complexation with Humic Acids.

Dissolved organic matter (DOM) plays an important role in the environment by influencing the transport and distribution of organic and inorganic components through different processes: the retention, mobilization, and bio-availability of potentially toxic elements (PTEs). The aim of the present study is to examine the dimensional characterization of humic acids (HA) extracted from soil matrix, as well as to analyze the metal distribution among different ligand classes. The molecular size distribution of the HA extract from soil showed three dimensional classes: 52 KDa, 4.5 KDa, and 900 Da. HPSEC-ICP-MS measurements demonstrated that the dimensional classes, relative to first two fractions, bind the largest part of metals. The complexing capacity of HA was evaluated to assess the pollutants mobility in the environmental system. In particular, cadmium (Cd) and copper (Cu) complexation was investigated due to the great concern regarding their bio-availability and toxicity in natural waters. The complexing capacity of HA solution (20 mg/L) was measured by titration using a high-performance size exclusion chromatography (HP-SEC) coupled to an inductively coupled mass spectrometry (ICP-MS). Results obtained by this technique are compared with those obtained by anodic stripping voltammetry (ASV) to investigate the effects of kinetic lability of complexes on measurements carried by HPSEC-ICP-MS. In this study, results of ligand concentrations and stability constants obtained via the two techniques are assessed considering the detection window associated to the applied analytical methodology. Results obtained using the two analytical techniques showed that Cd is complexed by two classes of ligands. However, the ligand concentration values obtained using the two techniques are different, because the detection window associated to the two methodologies; the complexing capacity, which was obtained as sum of the two classes of ligands, were 33 nmol/L and 9 nmol/L for ASV and HPSEC-ICP-MS, respectively. The copper complexing capacities determined by the two methodologies are comparable: 166 and 139 nmol/L for ASV and HPSEC-ICP-MS, respectively. However, the results of Cu titration differ for the two techniques, highlighting only one class of ligands when ASV was used, and two classes when HPSEC-ICP-MS was employed. Differences on results obtained by the two techniques are explained considering the kinetic lability of complexes; the results show that, differently from previous studies, also Cu complexes can be kinetically labile, if one technique with high reaction time is used, as well some cadmium complexes are sufficient stable to be determined by HPSEC-ICP-MS.

Free phenolic compounds in waters of the Ross Sea.

The presence of free phenolic compounds (PC) in Antarctic sea water has been investigated to explain their source and particle size distribution in the atmospheric aerosols, as determined in our previous research. The sea water samples were filtered to distinguish the PC concentrations in the particulate and dissolved fractions. Two sample preparation procedures were developed to quantify nine PC in both fractions. The highest concentrations were found in the dissolved fraction of Ross Sea water, with vanillin, vanillic acid, acetovanillone and p-coumaric acid being the most abundant PC. Dissolved PC were mainly found in the upper part of water column. This facilitated the sea water-air exchange by bubble busting processes. In the aerosol, they were mainly found in the fine fraction, where these compounds have a higher degree of oxidation than PC detected in seawater, suggesting that they were newly emitted and they have been not yet oxidized. These results supported our previous hypothesis that PC were locally emitted into the atmosphere from the Ross Sea. Three different possible sources of PC are hypothesized for Antarctic sea waters: 1) from the intrusion of Modified Circumpolar Deep Water that may transport oceanic lignin; 2) from phytoplankton biomass that may be a source of PC in Antarctic waters since diatoms produce exudates that contain vanillic acid, p-coumaric acid and syringic acid; 3) from the melting of glaciers and sea ice: glaciers contain lignin that can be degraded, while in the sea ice there are diatoms that may release PC. Statistical analysis and the low value of vanillic acid/vanillin ratio indicated that the most plausible source for PC in the dissolved fraction was the senescence of phytoplankton. As a contrast, particulate PC with higher vanillic acid/vanillin ratios were ascribed to degraded lignin or the sorption of diagenically oxidized material on particles.

Temporal evolution of cadmium, copper and lead concentration in the Venice Lagoon water in relation with the speciation and dissolved/particulate partition.

In order to study the role of sediment re-suspension and deposition versus the role of organic complexation, we investigated the speciation of cadmium (Cd), copper (Cu) and lead (Pb) in samples collected in the Venice Lagoon during several campaigns from 1992 to 2006. The increment in Cd and Pb concentration in the dissolved phases, observed in the central and northern basins, can be linked to important alterations inside the lagoon caused by industrial and urban factors. The study focuses on metal partition between dissolved and particulate phases. The analyses carried out in different sites illustrate the complex role of organic matter in the sedimentation process. While Cd concentration in sediments can be correlated with organic matter, no such correlation can be established in the case of Pb, whose particulate concentration is related only to the dissolved concentration. In the case of Cu, the role of organic complexation remains unclear.

Dissolved rare earth elements in the central-western sector of the Ross Sea, Southern Ocean: Geochemical tracing of seawater masses.

The present essay contributes to the existing literature on rare earth elements (REEs) in the southern hemisphere by presenting the first data, to our knowledge, on the vertical profiles of dissolved REEs in 71 samples collected in the central-western sector of the Ross Sea (Southern Ocean-SO). The REEs were measured in the water samples collected during the 2002-2003 and 2005-2006 austral summers. 4 samples were collected and analysed in the framework of a test experiment, as part of the WISSARD Project (Whillans Ice Stream Subglacial Access Research Drilling). Our results show significant differences between the REE patterns of the main water masses present in the SO: we could observe specific signature in the High Salinity Shelf Water (HSSW), Ice Shelf Water (ISW) and Low Salinity Shelf Water (LSSW). A significant increase in Terbium (Tb) concentration was observed in the HSSW and ISW, the two principal water masses contributing to the formation of Antarctic Bottom Water (AABW) in the Ross Sea area, and in LSSW. Some of the HSSW samples show enrichment in Neodymium (Nd). Dissolved REE could therefore be used as tracers to understand the deep circulation of the SO (Pacific sector). We hypothesize that: (I) the characteristic dissolved REE pattern may derive from the composition of source area and from the hydrothermal activity of the central-western area of the Ross Sea; (II) the Tb anomaly observed in the AABW on the South Australian platform could be partially explained by the contribution of AABW generated in the Ross Sea region.

A new exploration of licorice metabolome.

The roots and rhizomes of licorice plants (genus Glycyrrhiza L.) are commercially employed, after processing, in confectionery production or as sweetening and flavouring agents in the food, tobacco and beer industries. G. glabra, G. inflata and G. uralensis are the most significant licorice species, often indistinctly used for different productions. Licorice properties are directly related to its chemical composition, which determines the commercial values and the quality of the derived products. In order to better understand the characteristics and properties of each species, a chemical characterization of three species of licorice (G. glabra, G. inflata, G. uralensis) is proposed, through an untargeted metabolomic approach and using high-resolution mass spectrometry. The statistical analysis reveals new possible markers for the analyzed species, and provides a reliable identification of a high number of metabolites, contributing to the characterization of Glycyrrhiza metabolome.

Simultaneous determination of shikimic acid, salicylic acid and jasmonic acid in wild and transgenic Nicotiana langsdorffii plants exposed to abiotic stresses.

The presence and relative concentration of phytohormones may be regarded as a good indicator of an organism's physiological state. The integration of the rolC gene from Agrobacterium rhizogenes and of the rat glucocorticoid receptor (gr) in Nicotiana langsdorffii Weinmann plants has shown to determine various physiological and metabolic effects. The analysis of wild and transgenic N. langsdorffii plants, exposed to different abiotic stresses (high temperature, water deficit, and high chromium concentrations) was conducted, in order to investigate the metabolic effects of the inserted genes in response to the applied stresses. The development of a new analytical procedure was necessary, in order to assure the simultaneous determination of analytes and to obtain an adequately low limit of quantification. For the first time, a sensitive HPLC-HRMS quantitative method for the simultaneous determination of salicylic acid, jasmonic acid and shikimic acid was developed and validated. The method was applied to 80 plant samples, permitting the evaluation of plant stress responses and highlighting some metabolic mechanisms. Salicylic, jasmonic and shikimic acids proved to be suitable for the comprehension of plant stress responses. Chemical and heat stresses showed to induce the highest changes in plant hormonal status, differently affecting plant response. The potential of each genetic modification toward the applied stresses was marked and particularly the resistance of the gr modified plants was evidenced. This work provides new information in the study of N. langsdorffii and transgenic organisms, which could be useful for the further application of these transgenes.

Metabolomic analysis of wild and transgenic Nicotiana langsdorffii plants exposed to abiotic stresses: unraveling metabolic responses.

Nicotiana langsdorffii plants, wild and transgenic for the Agrobacterium rhizogenes rol C gene and the rat glucocorticoid receptor (GR) gene, were exposed to different abiotic stresses (high temperature, water deficit, and high chromium concentrations). An untargeted metabolomic analysis was carried out in order to investigate the metabolic effects of the inserted genes in response to the applied stresses and to obtain a comprehensive profiling of metabolites induced during abiotic stresses. High-performance liquid chromatography separation (HPLC) coupled to high-resolution mass spectrometry (HRMS) enabled the identification of more than 200 metabolites, and statistical analysis highlighted the most relevant compounds for each plant treatment. The plants exposed to heat stress showed a unique set of induced secondary metabolites, some of which were known while others were not previously reported for this kind of stress; significant changes were observed especially in lipid composition. The role of trichome, as a protection against heat stress, is here suggested by the induction of both acylsugars and glykoalkaloids. Water deficit and Cr(VI) stresses resulted mainly in enhanced antioxidant (HCAs, polyamine) levels and in the damage of lipids, probably as a consequence of reactive oxygen species (ROS) production. Moreover, the ability of rol C expression to prevent oxidative burst was confirmed. The results highlighted a clear influence of GR modification on plant stress response, especially to water deficiency-a phenomenon whose applications should be further investigated. This study provides new insights into the field of system biology and demonstrates the importance of metabolomics in the study of plant functioning. Graphical Abstract Untargeted metabolomic analysis was applied to wild type, GR and RolC modified Nicotiana Langsdorffii plants exposed to heat, water and Cr(VI) stresses. The key metabolites, highly affected by stress application, were identified, allowing to outline the main metabolic responses to stress in each plant genotype.

Response to metal stress of Nicotiana langsdorffii plants wild-type and transgenic for the rat glucocorticoid receptor gene.

Recently our findings have shown that the integration of the gene coding for the rat gluco-corticoid receptor (GR receptor) in Nicotiana langsdorffii plants induced morphophysiological effects in transgenic plants through the modification of their hormonal pattern. Phytohormones play a key role in plant responses to many different biotic and abiotic stresses since a modified hormonal profile up-regulates the activation of secondary metabolites involved in the response to stress. In this work transgenic GR plants and isogenic wild type genotypes were exposed to metal stress by treating them with 30ppm cadmium(II) or 50ppm chromium(VI). Hormonal patterns along with changes in key response related metabolites were then monitored and compared. Heavy metal up-take was found to be lower in the GR plants. The transgenic plants exhibited higher values of S-abscisic acid (S-ABA) and 3-indole acetic acid (IAA), salicylic acid and total polyphenols, chlorogenic acid and antiradical activity, compared to the untransformed wild type plants. Both Cd and Cr treatments led to an increase in hormone concentrations and secondary metabolites only in wild type plants. Analysis of the results suggests that the stress responses due to changes in the plant's hormonal system may derive from the interaction between the GR receptor and phytosteroids, which are known to play a key role in plant physiology and development.

Soils and sediments of the Thua Thien-Hue Province (central Vietnam): recognizing trace element sources and the likely influence of natural events.

Trace element concentrations have been measured in soil and sediment samples taken from the Thua Thien Hue (TT-H) Province and the Tam Giang-Cau Hai (TG-CH) Lagoon in 2002 and 2004. Results show that the lagoon is only slightly contaminated by elements such as Ag, Cd, Cr, Cu, Ni, Pb and Zn, whereas As, probably naturally enriched in this Asian region, reaches values above the lowest internationally accepted sediment quality guidelines. Concentrations in soils are ascribable to natural sources and distributions in the TG-CH Lagoon are mainly influenced by river inputs, with Ag and Cd undergoing estuarine desorption processes. However, concentration-depth profiles of most trace elements in sediments show a recent increasing trend that might be linked to the economic development of the area. The comparison of porosity and (210)Pb depth profiles (confirmed also by Cd and As) from repeated samplings of the same core locations in the TG-CH Lagoon seems to account for a loss of 5-10 cm of surficial sediment that took place during the time interval between the two samplings. It is hypothesized that extreme meteorological events (e.g. a major typhoon that hit the area in November 2003) could be responsible for such sediment displacement.

Assessment of a procedure to determine trace and major elements in atmospheric aerosol.

The determination of trace elements in atmospheric particulate is affected by a number of problems that arise from some critical points such as the blank of the filters, sample heterogeneity and pre-analytical treatments. In the framework of a monitoring campaign conducted in the Venice Lagoon the analytical methodology for the determination of 20 trace elements (Al, As, Ca, Cd, Co, Cr, Cs, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Sr, V, Zn) in atmospheric particulate samples by inductively coupled plasma quadrupole mass spectroscopy (ICP-QMS) has been optimized taking into account the individual critical points. Tests were carried out to estimate the blank contributions, and minimize the detection limit (LOD), measurements were also carried out to evaluate the accuracy and the repeatability. To obtain a complete dissolution of aerosol dust material and good recoveries of the elements, the acid mixture and the microwave assisted digestion program were optimized. The blank contributions from membrane filter manipulation and transportation prior to exposure were tested for the slotted and back filters by placing them on the sampling device for some minutes without air flowing to obtain field blanks (FBs). The contribution to the blank values of passive deposition and by contact with the samplers (quoted as campaign blanks, CBs) was measured by exposing the membranes throughout the sampling session (fifteen days) without any air flow. Instrumental ICP-QMS parameters were optimized and calibration curve intervals were selected on the basis of the necessity of simultaneous determination of the elements present at different levels of concentration. The limits of detection for each elements and the investigated method were suitable to determine the 20 elements reported above in the atmospheric aerosol fractionated in 6 classes ranging between 10 to 0.49 microm. It allows the determination of trace elements in aerosol in a large range of concentrations that can be observed in areas characterized by remarkable variability and regions with different levels of contamination.

Benthic fluxes of copper, complexing ligands and thiol compounds in shallow lagoon waters.

Benthic fluxes of copper, copper complexing ligands and thiol compounds in the shallow waters of Venice Lagoon (Italy) were determined using benthic chambers and compared to porewater concentrations to confirm their origin. Benthic copper fluxes were small due to small concentration differences between the porewaters and the overlying water, and the equilibrium concentration was the same at both sites, suggesting that the sediments acted to buffer the copper concentration. Thiol fluxes were approximately 10 x greater at 50-60 pmol cm(-2)h(-1), at the two sites. Porewater measurements demonstrated that the sediments were an important source of the thiols to the overlying waters. The overlying waters were found to contain at least two ligands, a strong one, L1 (log K'(CuL1) = 14.2) and a weaker one, L2 (log K'(CuL2) = 12.5). The concentration of L1 remained relatively constant during the incubation and similar to that of copper, whereas that of L2 was in great excess of copper, its concentration balanced by porewater releases and breakdown, probably due to uptake by microorganisms, similar to that of the thiol compounds. Similarity of the thiol and L2 concentrations and similar complex stability with copper suggest that L2 was dominated by the thiols. The free copper concentration ([Cu ]) in the Lagoon waters was lowered by a factor of 10(5) as a result of the organic complexation.

Sequential toxicity identification evaluation (TIE) for characterizing toxicity of Venice Lagoon sediments: comparison of two different approaches.

A toxicity identification evaluation phase-I (TIE-1) procedure was carried out on five pore water samples extracted from sediments of the Venice Lagoon previously investigated to assess both chemical contamination and toxic effects on the biota. Two different sequential TIE procedures were tested. A first sequence (TIE-1) provided for adding Na2S2O3, adding Na-EDTA, filtering, elution through a C18-SPE column and removing ammonia using the macroalgae Ulva rigida Agardh 1823, while a second procedure (TIE-2) was set up using U. rigida treatment for ammonia removal as first step, keeping unchanged the sequence of the other manipulations. Two different exposure time to the macroalgae were tested (3-h and 15-h). Sperm-cell toxicity test with the echinoid Paracentrotus lividus and embryotoxicity tests with the bivalves Mytilus galloprovincialis and Crassostrea gigas were performed on pore-water samples to assess the effect of the sequential treatments on the overall toxicity. The results confirmed that ammonia contribution to toxicity is strong in most of the samples and that metals, specially Cu, are of concern at least in three sites. The TIE-2 procedure provided more reliable results for the samples characterized by high ammonia contribution to the overall toxicity, whereas the results of TIE-1 and TIE-2 were equivalent for the samples where ammonia contribution was not prevailing. Chemical analyses and test results showed that a 3-h U. rigida exposure is suitable to remove ammonia toxicity minimizing potential metal up-take.

Seasonal evolution of gas-phase PCB concentrations in the Venice Lagoon area.

The concentrations of gas-phase PCBs were measured from March 2002 to June 2003 at two sites of the Venice Lagoon and at one site of the Euganei hills. The aims of this study were to evaluate the various gas-phase PCB sources, the spatial and temporal variability of PCB concentrations in the gas-phase that enter the Venice Lagoon atmosphere and the influence of the air temperature on PCB trends. The highest annual average concentration of summation PCBs was observed at the station directly influenced by "urban" sources with values about 3 and 1.5 times higher compared to the concentrations found at the stations where "marine" sources and "not subjected to direct local sources" were respectively sampled from. The temporal trends of summation PCBs concentrations were similar at the three sampling stations corresponding to seasonal temperature changes. Greater concentrations occurred in the summer and first autumn months while the lower ones occurred in late autumn and winter. The temperature dependences were investigated using plots of the natural logarithm of the summation PCBs concentrations vs. reciprocal mean temperatures.