Effects of acute consumption of a beverage based on extruded whole-grain pearl millet flour on glycemic and insulinemic control, food intake, and appetite sensation in eutrophic adults: A randomized cross-over clinical trial.

OBJECTIVES: Whole-grain pearl millet is a nutritious cereal source of dietary fiber, vitamins, minerals, and bioactive compounds. It offers health benefits such as glycemic control and satiety. Extrusion cooking for diverse formulations, including beverages, can alter its chemical composition, impacting the nutritional value. This study aimed to evaluate the sensory acceptability of an extruded millet flour beverage and its acute effects on glycemic index (GI), glycemic and insulinemic response, food intake, and subjective appetite sensations in euglycemic and eutrophic adults. METHODS: This is an acute, single-blind, randomized, controlled, cross-over clinical study comprising 14 euglycemic and eutrophic adults. Initially, beverages based on whole extruded millet flour were developed, and sensorially and chemically analyzed. Next, a clinical trial was conducted with participants undergoing four sessions and consuming one of the following options: extruded millet beverage, a maltodextrin control beverage, or a glucose solution administered in two separate sessions. Blood glucose, insulin, and appetite responses were assessed over a 2-h period, in addition to determining the GI of the beverages and analyzing food intake in the 24 h following each session. RESULTS: The extruded millet flour strawberry-flavored beverage had the best sensory acceptance and was classified as having as high GI. Consumption of the extruded millet beverage showed similar glycemic and insulinemic responses, as well as appetite control and food intake of the subjects, when compared with consumption of the maltodextrin control beverage. CONCLUSIONS: Intake of the extruded millet beverage maintained glycemic and insulinemic responses, appetite control, and food intake in euglycemic and eutrophic subjects.

Chemical composition and in vitro iron bioavailability of extruded and open-pan cooked germinated and ungerminated pearl whole millet "Pennisetum glaucum (L.) R. Br."

This study aimed to evaluate the effect of extrusion and of open-pan cooking on whole germinated and non-germinated grains of pearl millet (Pennisetum glaucum L. R. Br.), on its chemical-nutritional composition and in vitro iron bioavailability. The experimental design consisted of three flours: non-germination open-pan cooked millet flour (NGOPCMF), germination open-pan cooked millet flour (GOPCMF), and extrusion cooked millet flour (ECMF). The ECMF increased the carbohydrates, iron, manganese, diosmin, and cyanidin and decreased the total dietary fiber, resistant starch, lipids, and total vitamin E, in relation to NGOPCMF. The GOPCMF increased the lysine and vitamin C and decreased the phytate, lipids, total phenolic, total vitamin E, and riboflavin concentration, in relation to NGOPCMF. Furthermore, germinated cooked millet flour and extruded millet flour improved iron availability in vitro compared to non-germinated cooked millet flour. GOPCMF and ECMF generally preserved the chemical-nutritional composition of pearl millet and improved in vitro iron bioavailability; therefore, they are nutritionally equivalent and can be used to develop pearl millet-based products.

Chitosan-based nanocomposite films with carnauba wax, rosin resin, and zinc oxide nanoparticles.

This work aimed to develop edible emulsion-based barriers in the form of chitosan composite films, with a focus on assessing the impacts of carnauba wax, rosin resin, and zinc oxide nanoparticles on their properties. Six films were produced by casting using chitosan as polymer base and glycerol as plasticizer. Acetic acid and polysorbate 80 were also used to facilitate the dissolution and mixing of the components. The six filmogenic solutions contained chitosan at 1.2% w/v, wax or resin content with 0 or 0.6% m/v and ZnO with 0 or 0.05% m/v. The dried films were characterized according to their chemical, barrier, mechanical, thermal and optical properties. All treatments resulted in flexible films. Chitosan films appeared smoother and more uniform under SEM imaging, while carnauba wax films displayed roughness due to their hydrophobic nature. Wax and resin films were less transparent and water soluble than the chitosan-only films. On the other hand, the addition of ZnO in the formulations increased the solubility of the films. The sorption degree was in line with the solubility results, i.e., films with ZnO presented higher sorption degree and solubility values. All treatments showed low or non-light UV transmission, indicating that the films provide good barrier to UV light. In the visible light region, films of resin with ZnO showed the lowest transmittance values, hence offering a good barrier to visible light. Among the evaluated films, chitosan, and resin films with ZnO nanoparticles were more rigid and resistant to deformation. Overall, films produced with rosin resin and ZnO nanoparticles showed potential improvements in barrier, mechanical, thermal, and optical properties, mainly due to their low water solubility, good UV protection and low permeability to water vapor and oxygen, which are suitable for using in formulations, intended to produce edible films and coatings.

Green banana (Musa ssp.) mixed pulp and peel flour: A new ingredient with interesting bioactive, nutritional, and technological properties for food applications.

This study aimed to characterize and evaluate the in vitro bioactive properties of green banana pulp (GBPF), peel (GBPeF), and mixed pulp/peel flours M1 (90/10) and M2 (80/20). Lipid concentration was higher in GBPeF (7.53%), as were the levels of free and bound phenolics (577 and 653.1 mg GAE/100 g, respectively), whereas the resistant starch content was higher in GBPF (44.11%). Incorporating up to 20% GBPeF into the mixed flour had a minor effect on the starch pasting properties of GBPF. GBPeF featured rutin and trans-ferulic acid as the predominant free and bound phenolic compounds, respectively. GBPF presented different major free phenolics, though it had similar bound phenolics to GBPeF. Both M1 and M2 demonstrated a reduction in intracellular reactive oxygen species (ROS) generation. Consequently, this study validates the potential of green banana mixed flour, containing up to 20% GBPeF, for developing healthy foods and reducing post-harvest losses.

Evaluation of the Physical, Chemical, Technological, and Sensorial Properties of Extrudates and Cookies from Composite Sorghum and Cowpea Flours.

In recent years, there has been a growing demand for gluten-free and functional products, driven by consumer preferences for healthier and more diverse food choices. Therefore, there is a need to explore new ingredients that can be used as alternatives to traditional gluten-containing grains. Thus, this work evaluated the physical, chemical, technological, and sensorial properties of extrudates and cookies from composite tannin sorghum (rich in resistant starch) and white cowpea flours. Extrudates and cookies were produced from a composite flour made of sorghum and cowpea, at a sorghum:cowpea flour ratio of 70:30, 50:50, and 30:70. Then, raw flours, cookies, and extrudates were characterized (dietary fiber, resistant starch, proteins, antioxidant capacity, pasting properties, etc.). Results obtained for particle size distribution and bulk density indicated that the particles increased and the color changed with the addition of cowpea flour. The raw tannin sorghum flour had a higher resistant starch concentration (36.3%) and antioxidant capacity (211.2 µmolTE/g), whereas cowpea flour had higher levels of proteins (18.7%) and dietary fiber (20.1%). This difference in the raw flour composition contributed to the nutritional value of the extrudates and cookies, especially the cookies which undergo dry heat and had higher retention of resistant starch and antioxidants. Moreover, sorghum flour presented a higher tendency to retrograde (high setback), which was decreased by the addition of cowpea flour. Overall acceptance and intention to purchase were higher for extrudates with 100% sorghum flour (6.52 and 68.3%, respectively) and cookies with 70% cowpea flour (7.03 and 76.7%, respectively). Therefore, nutritious and functional gluten-free extrudates and cookies, of good acceptability, can be produced from composite tannin sorghum and white cowpea flours.

Germinated and non-germinated cooked whole millet (Pennisetum glaucum (L.) R. Br.) flours show a promising effect on protein quality, biochemical profile and intestinal health in vivo.

Millet is a promising cereal with high amounts of dietary fibre and protein, and in addition, bioactive compounds with health-promoting functional properties. This study aimed to evaluate the effect of germinated and cooked whole millet flour (Pennisetum glaucum (L.) R. Br.) on protein quality, biochemical profile and intestinal health in vivo. Thirty-two male Wistar rats (21 days old) were separated into four groups, which received a casein control diet (CC; n = 8), a free protein diet (aproteic; n = 8) and two treatment diets: non-germinated millet (NM; n = 8) and germinated millet (GM; n = 8) for 29 days. The whole millet flours presented an adequate essential amino acid profile, except for lysine. The GM group presented a higher protein efficiency ratio and net protein ratio compared to the NM group. Weight gain, Lee index, and food efficiency ratio were lower in the treatment groups, compared to the control group. The GM group had lower plasma glucose, uric acid, cholesterol, and faecal pH compared to the other groups. The treatment groups presented lower triglyceride levels, higher levels of acetic and propionic acids, a larger thickness and depth of the colonic crypts, and a higher expression of PepT1 genes than the CC group. In conclusion, the millet flours demonstrated potential for controlling the lipid profile and biometric measurements. Additionally, the whole germinated millet flour provided better protein quality and improved intestinal morphology and functionality. These results indicate that the consumption of millet could be increased in human food, and considering its potential health benefits, it could be an alternative for dietary diversification, and germination is a good processing option.

Impact of whole millet extruded flour on the physicochemical properties and antihyperglycemic activity of gluten free pasta.

Gluten-free pasta was developed from raw whole millet (RMF) and precooked (PCMF) flours by thermoplastic extrusion. The fusilli shape pasta were prepared with RMF (100%) and RMF:PCMF in a ratio of 50:50. The formulations were characterized for texture, cooking loss, antioxidant capacity, antihyperglycemic activity, sensory and color analyses. The RMF:PCMF blend exhibited better integrity while the RMF was less consistent and more brittle after cooking. The optimal cooking time was 8.5 min for RMF:PCMF and 6.5 min for RMF pasta. Concerning texture parameters, pasta with RMF:PCMF presented higher values ​​than those with RMF, approaching commercial pasta. The antioxidant capacity, DPPH and FRAP (78.5% SFR and 247.5 µmol Trolox/g), total phenolics (127.6 µmol gallic acid equivalent/g (GAE/g)) and antihyperglycemic activity (99.5%) were higher for RMF:PCMF than for pasta prepared with RMF alone. The protein, lipid and fiber content of RMF:PCMF pasta was higher than the commercial brown rice pasta. In relation to the instrumental color analysis, dry pasta (RMF:PCMF) showed a browning index (BI) of 31.9. The global acceptance index of the RMF:PCMF pasta was 66%, in which texture was the most highlighted negative parameter reported by the evaluators. Thus, the use of whole millet precooked flours by thermoplastic extrusion can be an alternative in the preparation of gluten-free products with better functional properties.

Chemical Characterization of White Lupin (Lupinus albus) Flour Treated by Extrusion Cooking and Aqueous Debittering Processes.

Lupin is a very nutritious legume with high levels of protein and fiber, but it also contains quinolizidine alkaloids which, depending on the species, can accumulate to toxic levels. The objective of this work was to evaluate the white lupin chemical composition, due to the effects of different processes (aqueous debittering, extrusion cooking, and reactive extrusion), aiming at reducing total alkaloids, preserving fibers, and increasing in vitro protein digestibility. Regarding raw material, the aqueous process reduced significantly total alkaloids (-93.87%), increased dietary fiber (+22.03%), and increased protein digestibility (+6.73%), whereas the extrusion processes were inefficient to reduce alkaloids (< -3.70%) and reduced the dietary fiber content, the reduction being more severe during reactive extrusion (-75.36%). Protein digestibility was improved by extrusion cooking (+3.07%), while the reactive extrusion reduced digestibility (-12.50%). Electrophoresis and quantification of soluble proteins and aromatic amino acids confirmed the high digestibility index, staying only the γ-conglutin fraction in the digested samples evaluated by SDS-PAGE. The aqueous process proved to be the best option, as it reduces the alkaloid content to safe levels and improves the protein digestion of white lupin flour.

Germinated Millet (Pennisetum glaucum (L.) R. Br.) Flour Improved the Gut Function and Its Microbiota Composition in Rats Fed with High-Fat High-Fructose Diet.

Germinated millet (Pennisetum glaucum (L.) R. Br.) is a source of phenolic compounds that has potential prebiotic action. This study aims at evaluating the action of germinated pearl millet on gut function and its microbiota composition in Wistar rats fed with a high-fat high-fructose (HFHF) diet. In the first stage, lasting eight weeks, the experiment consisted of two groups: AIN-93M (n = 10) and HFHF group (n = 20). In the second stage, which lasted ten weeks, the animals of the AIN-93M group (n = 10) were kept, while the HFHF group was dismembered into HFHF (HFHF diet, n = 10) and HFHF + millet (HFHF added 28.6% of germinated millet flour, n = 10) groups. After the 18th week, the urine of the animals was collected for the analysis of lactulose and mannitol intestinal permeability by urinary excretion. The histomorphometry was analyzed on the proximal colon and the fecal pH, concentration of short-chain fatty acids (SCFA), and sequencing of microbiota were performed in cecum content. The Mothur v.1.44.3 software was used for data analysis of sequencing. Alpha diversity was estimated by Chao1, Shannon, and Simpson indexes. Beta diversity was assessed by PCoA (Principal Coordinate Analysis). The functional predictive analysis was performed with PICRUSt2 software (version 2.1.2-b). Functional traits attributed to normalized OTU abundance were determined by the Kyoto Encyclopedia of Genes and Genomes (KEGG). In the results, germinated millet flour reduced Oscillibacter genus and Desulfobacterota phylum, while increasing the Eggerthellaceae family. Furthermore, germinated millet flour: increased beta diversity, cecum weight, and cecum/body weight ratio; improved gut histological parameters by increasing the depth and thickness of the crypt and the goblet cell count (p < 0.05); reduced (p < 0.05) the fecal pH and mannitol urinary excretion; increased (p < 0.05) the propionate short-chain fatty acid concentration. Thus, germinated millet has the potential to improve the composition of gut microbiota and the intestinal function of rats fed with an HFHF diet.

Genome-wide association study of cassava starch paste properties.

An understanding of cassava starch paste properties (CSPP) can contribute to the selection of clones with differentiated starches. This study aimed to identify genomic regions associated with CSPP using different genome-wide association study (GWAS) methods (MLM, MLMM, and Farm-CPU). The GWAS was performed using 23,078 single-nucleotide polymorphisms (SNPs). The rapid viscoanalyzer (RVA) parameters were pasting temperature (PastTemp), peak viscosity (PeakVisc), hot-paste viscosity (Hot-PVisc), cool-paste viscosity (Cold-PVisc), final viscosity (FinalVis), breakdown (BreDow), and setback (Setback). Broad phenotypic and molecular diversity was identified based on the genomic kinship matrix. The broad-sense heritability estimates (h2) ranged from moderate to high magnitudes (0.66 to 0.76). The linkage disequilibrium (LD) declined to between 0.3 and 2.0 Mb (r2 <0.1) for most chromosomes, except chromosome 17, which exhibited an extensive LD. Thirteen SNPs were found to be significantly associated with CSPP, on chromosomes 3, 8, 17, and 18. Only the BreDow trait had no associated SNPs. The regional marker-trait associations on chromosome 18 indicate a LD block between 2907312 and 3567816 bp and that SNP S18_3081635 was associated with SetBack, FinalVis, and Cold-PVisc (all three GWAS methods) and with Hot-PVisc (MLM), indicating that this SNP can track these four traits simultaneously. The variance explained by the SNPs ranged from 0.13 to 0.18 for SetBack, FinalVis, and Cold-PVisc and from 0.06 to 0.09 for PeakVisc and Hot-PVisc. The results indicated additive effects of the genetic control of Cold-PVisc, FinalVis, Hot-PVisc, and SetBack, especially on the large LD block on chromosome 18. One transcript encoding the glycosyl hydrolase family 35 enzymes on chromosome 17 and one encoding the mannose-p-dolichol utilization defect 1 protein on chromosome 18 were the most likely candidate genes for the regulation of CSPP. These results underline the potential for the assisted selection of high-value starches to improve cassava root quality through breeding programs.

Effect of extrusion and turmeric addition on phenolic compounds and kafirin properties in tannin and tannin-free sorghum.

Sorghum is a potential substitute for corn/wheat in cereal-based extruded products. Despite agronomic advantages and its rich diversity of phenolic compounds, sorghum kafirins group together and form complex with tannins, leading to a low digestibility. Phenolic content/profile by UPLC-ESI-QTOF-MSE and kafirins polymerization by SE-HPLC were evaluated in wholemeal sorghum extrudates; tannin-rich (#SC319) and tannin-free (#BRS330) genotypes with/without turmeric powder. Total phenolic, proantocyanidin and flavonoid contents were strongly correlated with antioxidant capacity (r > 0.9, p < 0.05). Extrusion increased free (+60%) and decreased bound phenolics (-40%) in #SC319, but reduced both (-40%; -90%, respectively) in #BRS330, which presented lower abundance after extrusion. Turmeric addition did not significantly impact antioxidant activity, phenolic content and profile and kafirins profile. Tannins presence/absence impacted phenolic profiles and polymerization of kafirins which appears related to the thermoplastic process. The extrusion improved proteins solubility and can positively enhance their digestibility (phenolic compounds-proteins interactions), making more accessible to proteolysis in sorghum extrudates.

Germinated millet flour (Pennisetum glaucum (L.) R. BR.) improves adipogenesis and glucose metabolism and maintains thyroid function in vivo.

This study investigated the effects of germinated millet flour on adipogenesis, insulin resistance, glucose tolerance and thyroid function in Wistar rats fed with a high-fat high-fructose diet (HFHF). The experiment was divided into two phases. Phase 1: control group, which received an AIN-93M diet (n = 10) and HFHF group (n = 20), which received a diet rich in saturated fat (31%) and fructose (20%), for eight weeks. Phase 2: intervention: the control group maintained the AIN-93M diet (n = 10) and the HFHF group was divided into two groups: the HFHF (n = 10) and the germinated millet group (n = 10), for 10 weeks. The germinated millet flour maintained (p > 0, 05) the plasma levels of thyroid hormones, increased (p < 0.05) the insulin receptor (INSR) mRNA expression, protein kinase B (AKT) mRNA expression and the phospho-AKT1 protein concentration, phosphofructokinase (PFK) mRNA, pyruvate kinase (PK) mRNA and activated protein kinase (AMPK) mRNA expression, and the brown adipose tissue and reduced (p < 0.05) the glucose triglyceride index (TyG), glucose, insulin, HOMA-IR and hypercorticosteronemia, compared to the HFHF group. These effects contributed to reduce the gluconeogenesis, hyperinsulinemia and adiposity. Thus, germinated millet flour is a good alternative for modulating the adipogenesis and glucose metabolism, without interfering with the thyroid hormones, in rats with an insulin resistance condition with a high-fat high-fructose diet.

Stability of B vitamins, vitamin E, xanthophylls and flavonoids during germination and maceration of sorghum (Sorghum bicolor L.).

The impact of maceration and germination on the concentration of bioactive compounds still needs to be evaluated. The stability of B complex vitamins (thiamine, riboflavin, pyridoxine), vitamin E (α, ß, γ, δ tocopherols and tocotrienols), xanthophylls (lutein and zeaxanthin) and flavonoids (3-deoxyanthocyanidins-3-DXAs, flavones and flavanones) was evaluated in sorghum grains subjected to maceration and germination, using High Performance Liquid Chromatography. Maceration and germination reduced thiamine and pyridoxine concentrations (retentions ranging from 3.8 to 50.2%). Riboflavin and Vitamin E concentrations were not affected by maceration. Germination increased riboflavin and reduced vitamin E. 3-DXAs were sensitive to maceration and germination (retentions of 69.6% and 69.9%, respectively). Flavones contents decreased with germination. Our results indicate that, after germination and/or maceration, sorghum had important nutritional and functional value. Thus, its intake, mainly in macerated forms, should be encouraged, since concentrations of riboflavin, vitamin E and flavones were not altered during this processing.

Microencapsulation of vitamin D3 by complex coacervation using carboxymethyl tara gum (Caesalpinia spinosa) and gelatin A.

Vitamin D3 plays a fundamental role in human health; however, it is highly susceptible to environmental conditions and the gastrointestinal tract. In this study, complex coacervates obtained from gelatin A and carboxymethyl tara gum (CMTG) were used as wall materials for the encapsulation of vitamin D3 (VD3). Zeta potential and turbidity measurements were employed to optimize the pH and ratio (gelatin A:CMTG), and the results showed that the ideal conditions for the complex coacervation were pH 4.0 and a 6:1 ratio. The encapsulation efficiency (EE) was determined as a function of the total concentration of biopolymers (TC%) and the core-to-wall ratio, and the greatest EE (80%) was achieved at a TC of 1% and a ratio of 1:2; spherical particles with an average size of 0.25 µm were obtained. The microencapsulation increased the thermal stability of VD3, and FTIR confirmed the presence of the biopolymers and VD3 in the capsules. An in vitro simulation showed a more pronounced release in the small intestine with a vitamin bioaccessibility of 56%. The encapsulation of bioactive lipophilic compounds by complex coacervates of gelatin A and CMTG resulted in improved stability and prolonged release during digestion.

Cellulose nanocrystals from grape pomace and their use for the development of starch-based nanocomposite films.

Nanocomposite films prepared from starch (ST) in the presence of cellulose nanocrystals (CNCs) was performed using grape pomace as raw material. CNCs were obtained by acid hydrolysis and added to filmogenic solutions (1, 2, 5, 10 and 15 g/100 g of ST). Cellulose, CNCs and Nanocomposites were characterized. Amorphous non-cellulosic materials were removed from the grape pomace presented values for CrI 64% and 71% and yield 12 and 70% in Cellulose and CNCs, respectively. Nanocomposites showed smaller permeability and the addition of 5 to 15% CNCs formed more opaque films and had improved tensile strength and Young's modulus. The addition of CNCs from 5 to 15% proved to be effective in improving mechanical properties and decreasing water vapor permeability, important characteristics in food packaging materials. This study provided an effective method to obtain CNCs from the agroindustrial waste and open the way to produce high-value starch based nanocomposites.

Effect of sonication on the quality attributes of juçara, banana and strawberry smoothie.

Effect of sonication on the quality parameters of juçara, banana and strawberry smoothie was evaluated using a rotational central composite design with power (73.5-250.0 W) and time (7-36 min) as independent variables. The sonicated smoothie was evaluated regarding anthocyanins, instrumental color and rheological and physicochemical parameters. Within the evaluated processing conditions, 86% of anthocyanins were retained. The pH and acidity of the smoothie wasn't affected by the independent variables. Regarding instrumental color parameters, only luminosity was affected by the operational conditions. The cavitation phenomenon decreased the apparent viscosity of the smoothie. The sonicated smoothie presented non-Newtonian behavior, with characteristics of a pseudoplastic fluid (n < 1) in all treatments and control. Taking into account that the highest anthocyanin retention was observed at 147 W for 2 min, this condition was the most recommended for the processing of the product.

Physicochemical, thermal and rheological properties of synthesized carboxymethyl tara gum (Caesalpinia spinosa).

Carboxymethyl tara gum (CMTG) was synthesized from the reaction between tara gum (TG) and monochloroacetic acid (MCA) in the presence of sodium hydroxide. The modification reaction was optimized in terms of the MCA/NaOH ratio, reaction time and temperature evaluated for degree of substitution (DS). The etherification was confirmed by FTIR and 13C NMR spectroscopy, and it was characterized by different analyses. After carboxymethylation, CMTG showed new bonds at 1592, 1413 and 1320 cm-1 by FTIR and a new peak at δ = 178 ppm by 13C NMR in response to the insertion of the carbonyl group. The microscopy showed higher degradation on the surface of the CMTG particles, and XRD indicated low crystallinity of the CMTG. Static light scattering demonstrated a reduction in the molar mass of tara gum after carboxymethylation. Thermal analysis (TGA and DSC) revealed a lower thermal stability of carboxymethylated gum compared to that of unmodified gum. Despite the insertion of negative charges demonstrated by the potential-zeta, CMTG and TG presented pseudoplastic behavior according to the rheological analyses, and CMTG presented lower viscosity at the concentrations that were studied.

Extruded sorghum consumption associated with a caloric restricted diet reduces body fat in overweight men: A randomized controlled trial.

This study aimed to evaluate the effect of sorghum intake on body composition and metabolic variables in overweight men. In a randomized controlled crossover study, 24 overweight men (25.6 ±â€¯4.6 years) were randomly allocated into one of two treatments: extruded sorghum or extruded wheat. The study consisted of 2 periods of 8 weeks with at least 4 weeks of washout. Anthropometric, clinical and metabolic risk variables were assessed at baseline and at the end of each intervention period. Extruded sorghum consumption reduced body fat percentage and increased daily carbohydrate and dietary fiber intake when compared to wheat consumption. Also, sorghum increased the serum glutathione peroxidase concentration, but no difference was observed when compared to wheat consumption. Extruded sorghum demonstrated to be a good alternative to control obesity in overweight men.

Formation and characterization of the complex coacervates obtained between lactoferrin and sodium alginate.

The aim of this study was to evaluate the influence of some parameters (pH, NaCl, and ratio of biopolymers) on the formation of the complex coacervates of lactoferrin and sodium alginate. Different ratios of lactoferrin:sodium alginate were tested (1:1, 1:2, 1:4,1:8, 2:1, 4:1, and 8:1) at pH levels ranging from 2.0 to 7.0 with different concentrations of NaCl (0, 50, 100, 150, and 200 mM). Sodium alginate has a molecular weight of 138 kDa ±â€¯0.07. The ratio of 8:1(lactoferrin: sodium alginate) at a pH of 4.0 with a low salt concentration was the optimal condition for the formation of the complex. The thermodynamic parameters demonstrated that the interaction between lactoferrin and sodium alginate was exothermic and spontaneous with a favorable enthalpic and unfavorable entropic contribution during the interaction. The chemical, thermal and morphological characteristics of the biopolymers and the complex coacervates demonstrated their nature and changes due to electrostatic interactions. The formation of complex coacervates between lactoferrrin and sodium alginate can serve as an alternative to the incorporation of lipophilic functional ingredients sensitive to high temperatures in various food systems.

Effect of Processing on Bioactive Compounds, Physicochemical and Rheological Characteristics of Juçara, Banana and Strawberry Smoothie.

This study aimed to evaluate the effect of processing steps on bioactive compounds and physicochemical and rheological characteristics of a juçara, banana and strawberry smoothie. The product was obtained by mixing the pulps of these fruits in previously defined proportions. The mixture was standardized in a pilot disintegrator, homogenized at 60 MPa in continuous mode and pasteurized at 90 °C for 35 s. The homogenization step increased the concentration of cyanidin-3-O-glucoside and cyanidin-3-O-rutinoside, major anthocyanins in the smoothie. However, these anthocyanins, as well as perlagonidin-3-O-glucoside, have been reduced (p<0.05) after the pasteurization step. The pasteurization also affected the instrumental color of the smoothie, expressed by Hue angle (p<0.05). Regarding to the rheological behavior, the smoothie, in all processing steps, presented a non-Newtonian fluid behavior with pseudoplastic characteristics (n<1). After homogenization, the smoothie became more fluid and homogeneous. Thus, despite the negative impact of pasteurization on the smoothie's color, the pasteurized product preserves the bioactive compounds such as flavonoids and phenolic acids that are of great importance to human health. Furthermore, the development of this product contributes to add value to the juçara agro-chain and Atlantic Forest preservation.